Sector, region or function? A MAD reassessment of real estate diversification in Great Britain

This paper re-examines whether it is more advantageous in terms of risk reduction to diversify by sector or region by comparing the performance of the ‘conventional’ regional classification of the UK with one based on modern socio-economic criteria using a much larger real estate data set than any previous study and the MAD portfolio approach. The general conclusion of this analysis is that property market sectors still dominate regions, however defined and so should be the first level of analysis when developing a portfolio diversification strategy. This is in line with previous research. When the performance of Functional groups is compared with the ‘conventional’ administrative regions the results here show that, when functionally based, groupings can in some cases provide greater risk reduction. In addition the underlying characteristics of these functional groups may be much more insightful and acceptable to real estate portfolio managers in considering the assets that a portfolio might contain.

Identifying antimicrobial resistance genes of human clinical relevance within Salmonella isolated from food animals in Great Britain

To investigate the occurrence of antimicrobial resistance genes of human clinical relevance in Salmonella isolated from livestock in Great Britain. Two hundred and twenty-five Salmonella enterica isolates were characterized using an antimicrobial resistance gene chip and disc diffusion assays. Plasmid profiling, conjugation experiments and identification of Salmonella genomic island 1 (SGI1) were performed for selected isolates. Approximately 43% of Salmonella harboured single or multiple antimicrobial resistance genes with pig isolates showing the highest numbers where 96% of Salmonella Typhimurium harboured one or more resistance genes. Isolates harbouring multiple resistances divided into three groups. Group 1 isolates harboured ampicillin/streptomycin/sulphonamide/tetracycline resistance and similar phenotypes. This group contained isolates from pigs, cattle and poultry that were from several serovars including Typhimurium, 4,[5],12:i:-, Derby, Ohio and Indiana. All Group 2 isolates were from pigs and were Salmonella Typhimurium. They contained a non-sul-type class 1 integron and up to 13 transferrable resistances. All Group 3 isolates harboured a class 1 integron and were isolated from all animal species included in the study. Most isolates were Salmonella Typhimurium and harboured SGI1. Salmonella isolated from livestock was shown to harbour antimicrobial resistance genes although no or little resistance to third-generation cephalosporins or ciprofloxacin, respectively, was detected. The preponderance in pigs of multidrug-resistant Salmonella Typhimurium makes it important to introduce control measures such as improved biosecurity to ensure that they do not pass through the food chain and limit human therapeutic options.

A high prevalence of antimicrobial resistant Escherichia coli isolated from pigs and a low prevalence of antimicrobial resistant E-coli from cattle and sheep in Great Britain at slaughter

The incidence of antimicrobial resistance and expressed and unexpressed resistance genes among commensal Escherichia coli isolated from healthy farm animals at slaughter in Great Britain was investigated. The prevalence of antimicrobial resistance among the isolates varied according to the animal species; of 836 isolates from cattle tested only 5.7% were resistant to one or more antimicrobials, while only 3.0% of 836 isolates from sheep were resistant to one or more agents. However, 92.1% of 2480 isolates from pigs were resistant to at least one antimicrobial. Among isolates from pigs, resistance to some antimicrobials such as tetracycline (78.7%), sulphonamide (66.9%) and streptomycin (37.5%) was found to be common, but relatively rare to other agents such as amikacin (0.1%), ceftazidime ( 0.1%) and coamoxiclav (0.2%). The isolates had a diverse range of resistance gene profiles, with tet(B), sul2 and strAB identified most frequently. Seven out of 615 isolates investigated carried unexpressed resistance genes. One trimethoprim-susceptible isolate carried a complete dfrA17 gene but lacked a promoter for it. However, in the remaining six streptomycin-susceptible isolates, one of which carried strAB while the others carried aadA, no mutations or deletions in gene or promoter sequences were identified to account for susceptibility. The data indicate that antimicrobial resistance in E. coli of animal origin is due to a broad range of acquired genes.

Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.

The re-identification of great bustard (Otis tarda) from Fishbourne Roman Palace, Chichester, West Sussex, as common crane (Grus grus)

This paper details the results of recent reanalysis of the animal remains from the 1960s excavations at Fishbourne Roman Palace, West Sussex. It argues that specimens originally identified as belonging to the great bustard are, in fact, misidentified remains of common crane. This discovery has important connotations. First, these findings need to be reported so that the avian archaeological record can be updated to avoid future syntheses of Romano-British faunal remains incorrectly including great bustard. Secondly, interpretations of the zooarchaeological remains at Fishbourne Palace will alter, due to the differing ecological histories of bustards and cranes.

Attaching and effacing lesions in the large intestine of an eight-month-old heifer associated with Escherichia coli O26 infection in a group of animals with dysentery

Escherichia coli O26:K60, with genetic attributes consistent with a potentially human enterohaemorrhagic E coli was isolated from the faeces of an eight-month-old heifer with dysentery. Attaching and effacing lesions were identified in the colon of a similarly affected heifer examined postmortem, and shown to be associated with E coli O26 by specific immunolabelling.

Prehistoric activity in Peterstone Great Wharf Palaeochannels: field survey 2005-6

This is an interim report on research carried out at the intertidal site of Peterstone Great Wharf, located on the Wentlooge Levels, c. 7 km east of Cardiff. The project is the first detailed survey and excavation of a site originally recorded in 1996-7 as part of a larger survey of the intertidal zone from Cardiff to the Second Severn Crossing. The 1997 survey produced important evidence for prehistoric human activity preserved within four palaeochannels. Significant erosion has taken place since then. A new survey of the foreshore has identified additional palaeochannels not seen in 1997 which form part of a more complex system of inter-cutting channels, many containing wood structures including short lines of timbers on the channel edge. Artefacts include a wooden axe handle, antler artefacts, an animal bone assemblage and some pottery of Beaker and Bronze Age date. The finds are thought to derive from a nearby, possibly eroded, settlement. The channels have trapped artefacts and preserved evidence of a range of activities, including what are interpreted as possible boat landings and fishing structures.