The impact of installer business models on the uptake of residential microgeneration in the UK: Evidence from a nation-wide survey

This paper arises from a doctoral thesis comparing the impact of alternative installer business models on the rate at which microgeneration is taken up in homes and installation standards across the UK. The paper presents the results of the first large-scale academic survey of businesses certified to install residential microgeneration. The aim is to systematically capture those characteristics which define the business model of each surveyed company, and relate these to the number, location and type of technologies that they install, and the quality of these installations. The methodology comprised a pilot web survey of 235 certified installer businesses, which was carried out in June last year and achieved a response rate of 30%. Following optimisation of the design, the main web survey was emailed to over 2000 businesses between October and December 2011, with 317 valid responses received. The survey is being complemented during summer 2012 by semi-structured interviews with a representative sample of installers who completed the main survey. The survey results are currently being analysed. The early results indicate an emerging and volatile market where solar PV, solar hot water and air source heat pumps are the dominant technologies. Three quarters of respondents are founders of their installer business, while only 22 businesses are owned by another company. Over half of the 317 businesses have five employees or less, while 166 businesses are no more than four years old. In addition, half of the businesses stated that 100% of their employees work on microgeneration-related activities. 85% of the surveyed companies have only one business location in the UK. A third of the businesses are based either in the South West or South East regions of England. This paper outlines the interim results of the survey combined with the outcomes from additional interviews with installers to date. The research identifies some of the business models underpinning microgeneration installers and some of the ways in which installer business models impact on the rate and standards of microgeneration uptake. A tentative conclusion is that installer business models are profoundly dependent on the levels and timing of support from the UK Feed-in Tariffs and Renewable Heat Incentive.

Addressee orientation in political speeches: tracing the dialogical 'other' in argumentative monologue

This article suggests that the addressees as the dialogical ‘other’ loom large in monological political speeches. However, political speeches are produced under conditions of addressee heterogeneity, i.e. the speakers do not actually know who they will be talking to. It will be argued that the addressees are nevertheless a crucial element in speakers’ context models, that speakers orientate towards imagined addressees and that certain aspects – what possible addressees may do, think or believe and that they are a part of an imagined community – are particularly relevant from the speakers’ point of view. An analysis of addressee orientation in political speeches aims at reconstructing speakers’ conceptualisations of possible addressees. The analysis reveals patterns of addressee orientation which suggest that the addressees are framed in terms of presumed nearness (i.e. agreement) or distance (i.e. disagreement) to the speakers. Both presumed agreement and disagreement will be discussed in terms of how the speakers aim to impose their default perspectives on the addressees. The analysis is based on examples from a substantial corpus of German chancellors’ political speeches from 1951-2001.

The "Fair trade nation": market-oriented development in devolved European regions

Scholars have largely ignored the roles played by government and public sector institutions in the fair trade movement. This article addresses the knowledge gap through examining government involvement in fair trade networks in the context of European devolution and the localization of international development action. Proposing a relational view of fair trade networks, and considering the Fair Trade Nation as a social category for development, it highlights how power sources outside the centralized nation-state permit a political community to associate itself with fair trade. Research from Wales demonstrates that government acts in a leadership role rather than as regulator, conferring political voice and finance while enhancing its international credentials and contributing to the politics of nation-building. Our conclusion is cautious; campaigners celebrate political commitment to fair trade embodied within the category of the Fair Trade Nation, but evidence suggests that government reliance on the market as a vehicle for decentralized development action is limited by how the Fair Trade Nation is currently executed.

Preferred orientation in an angled intercalation site of a chloro-substituted lambda- [Ru(TAP)2(dppz)]2+ complex bound to d(TCGGCGCCGA)2

The crystal structure of the ruthenium DNA ‘light-switch’ complex -[Ru(TAP)2(11-Cl-dppz)]2+ (TAP = tetraazaphenanthrene, dppz = dipyrido[3,2-a':2',3'-c]phenazine)) bound to the oligonucleotide duplex d(TCGGCGCCGA)2 is reported. The synthesis of the racemic ruthenium complex is described for the first time, and the racemate was used in this study. The crystal structure, at atomic resolution (1.0 Å), shows one ligand as a wedge in the minor groove, resulting in the 51 kinking of the double helix, as with the parent lambda-[Ru(TAP)2(dppz)]2+. Each complex binds to one duplex by intercalation of the dppz ligand and also by semi-intercalation of one of the orthogonal TAP ligands into a second symmetrically equivalent duplex. The 11-Cl substituent binds with the major component (66%) oriented with the 11-chloro substituent on the purine side of the terminal step of the duplex.

Enhancing the crystallization and orientation of electrospinning poly (lactic acid) (PLLA) by combining with additives

PLLA is a thermoplastic biopolymer and can be used in industrial applications for medical and filtration applications. The brittleness of PLLA is attributed to slow crystallization rates and its glass transition temperature (Tg) is high (60 °C); for this reason, its applications are limited. The orientation, morphology, and crystal structure of the electrospun fibers was investigated by SEM, POM, DSC, FTIR, XRD, and SAXS. Combining with additives leads to a large decrease of fiber diameter, viscosity, and changes of fiber morphology and crystal structure compared to pure PLLA. DSC showed that the Tg of PLLA decreased about 15 °C and there was no change in relaxation enthalpy by the addition of plasticizer. FT-IR indicate a strong interaction between PLLA and additives; a new band appears in the PLLA blend at 1,756 cm−1 at room temperature as a crystalline band without any annealing. In addition, WAXD indicated that the intensities of the two peaks at (200/110) and (203) increased for the blend at room temperature without any annealing in comparison with PLLA; this means that PHB crystallizes in the amorphous region of PLLA. The POM experiments agree with the results from DSC, FTIR, and WAXS measurements, confirming that adding PHB results in an increase in the number of nuclei with much smaller spherulites and enhances the crystallization behavior of this material, thereby improving its potential for applications.

ESR and EISCAT observations of the response of the cusp and cleft to IMF orientation changes

We report observations of the cusp/cleft ionosphere made on December 16th 1998 by the EISCAT (European incoherent scatter) VHF radar at Tromso and the EISCAT Svalbard radar (ESR). We compare them with observations of the dayside auroral luminosity, as seen by meridian scanning photometers at Ny Alesund and of HF radar backscatter, as observed by the CUTLASS radar. We study the response to an interval of about one hour when the interplanetary magnetic field (IMF), monitored by the WIND and ACE spacecraft, was southward. The cusp/cleft aurora is shown to correspond to a spatially extended region of elevated electron temperatures in the VHF radar data. Initial conditions were characterised by a northward-directed IMF and cusp/cleft aurora poleward of the ESR. A strong southward turning then occurred, causing an equatorward motion of the cusp/cleft aurora. Within the equatorward expanding, southward-IMF cusp/cleft, the ESR observed structured and elevated plasma densities and ion and electron temperatures. Cleft ion fountain upflows were seen in association with elevated ion temperatures and rapid eastward convection, consistent with the magnetic curvature force on newly opened held lines for the observed negative IMF B-y. Subsequently, the ESR beam remained immediately poleward of the main cusp/cleft and a sequence of poleward-moving auroral transients passed over it. After the last of these, the ESR was in the polar cap and the radar observations were characterised by extremely low ionospheric densities and downward field-aligned flows. The IMF then turned northward again and the auroral oval contracted such that the ESR moved back into the cusp/cleft region. For the poleward-retreating northward-IMF cusp/cleft, the convection flows were slower, upflows were weaker and the electron density and temperature enhancements were less structured. Following the northward turning, the bands of high electron temperature and cusp/cleft aurora bifurcated, consistent with both subsolar and lobe reconnection taking place simultaneously. The present paper describes the large-scale behaviour of the ionosphere during this interval, as observed by a powerful combination of instruments. Two companion papers, by Lockwood et al. (2000) and Thorolfsson et al. (2000), both in this issue, describe the detailed behaviour of the poleward-moving transients observed during the interval of southward B-z, and explain their morphology in the context of previous theoretical work.

Predicting the orientation of lipid cubic phase films

Lipid cubic phase films are of increasingly widespread importance, both in the analysis of the cubic phases themselves by techniques including microscopy and X-ray scattering, and in their applications, especially as electrode coatings for electrochemical sensors and for templates for the electrodeposition of nanostructured metal. In this work we demonstrate that the crystallographic orientation adopted by these films is governed by minimization of interfacial energy. This is shown by the agreement between experimental data obtained using grazing-incidence small-angle X-ray scattering (GI-SAXS), and the predicted lowest energy orientation determined using a theoretical approach we have recently developed. GI-SAXS data show a high degree of orientation for films of both the double diamond phase and the gyroid phase, with the [111] and [110] directions respectively perpendicular to the planar substrate. In each case, this matches the lowest energy facet calculated for that particular phase.

Influence of individual ethical orientation on tax compliance: evidence among Ghanaian taxpayers

Even though Africa has constantly emphasized the need to reduce deficit financing through mobilization of more internal revenues, this has not been achieved. Perhaps encouraging voluntary tax compliance can improve internal revenue mobilization. This study explores the relationship between ethical orientation and tax compliance and finds that ethical persons are generally more tax compliant than unethical persons but are more influenced by considerations of tax rate and withholding positions compared to unethical persons. The findings of this study differ from Reckers et al. in a number of ways and contribute to the literature by providing a possible explanation of the cause(s) of tax non- compliance.