Urban mammals: what does the future hold? An analysis of the factors affecting patterns of use of residential gardens in Great Britain

1Urban areas are predicted to grow significantly in the foreseeable future because of increasing human population growth. Predicting the impact of urban development and expansion on mammal populations is of considerable interest due to possible effects on biodiversity and human-wildlife conflict. 2The British government has recently announced a substantial housing programme to meet the demands of its growing population and changing socio-economic profile. This is likely to result in the construction of high-density, low-cost housing with small residential gardens. To assess the potential effects of this programme, we analysed the factors affecting the current pattern of use of residential gardens by a range of mammal species using a questionnaire distributed in wildlife and gardening magazines and via The Mammal Society. 3Twenty-two species/species groups were recorded. However, the pattern of garden use by individual species was limited, with only six species/species groups (bats, red fox Vulpes vulpes, grey squirrel Sciurus carolinensis, hedgehog Erinaceus europaeus, mice, voles) recorded as frequent visitors to > 20% of gardens in the survey. 4There was a high degree of association between the variables recorded in the study, such that it was difficult to quantify the effects of individual variables. However, all species/species groups appeared to be negatively affected by the increased fragmentation and reduced proximity of natural and semi-natural habitats, decreasing garden size and garden structure, but to differing degrees. Patterns of garden use were most clearly affected by house location (city, town, village, rural), with garden use declining with increasing urbanization for the majority of species/species groups, except red foxes and grey squirrels. Increasing urbanization is likely to be related to a wide range of interrelated factors, any or all of which may affect a range of mammal species. 5Overall, the probable effects of the planned housing development programme in Britain are not likely to be beneficial to mammal populations, although the pattern of use examined in this study may represent patterns of habitat selection by species rather than differences in distribution or abundance. Consequently, additional data are required on the factors affecting the density of species within urban environments.

Is there a relationship between soil and groundwater toxicity?

Part IIA of the Environmental Protection Act 1990 requires environmental regulators to assess the risk of contaminants leaching from soils into groundwater (DETR, 1999). This newly introduced legislation assumes a link between soil and groundwater chemistry, in which rainwater leaches contaminants from soil into the saturated zone. As the toxicity of both groundwater and overlying soils is dependent upon the chemicals present, their partitioning and their bioavailability, similar patterns of soil, leachates and groundwater toxicity should be observed at contaminated sites. Soil and groundwater samples were collected from different contaminated land sites in an urban area, and used to determine relationships between soil chemistry and toxicity, mobility of contaminants, and groundwater chemistry and toxicity. Soils were leached using water to mimic rainfall, and both the soils and leachates tested using bioassays. Soil bioassays were carried out using Eisenia fetida, whilst groundwater and leachates were tested using the Microtox(TM) test system and Daphnia magna 48 h acute tests. Analysis of the bioassay responses demonstrated that a number of the samples were toxic to test organisms, however, there were no significant statistical relationships between soil, groundwater and leachate toxicity. Nor were there significant correlations between soil, leachates and groundwater chemistry.

A simplified mathematical model for urban microclimate simulation

Techniques for modelling urban microclimates and urban block surfaces temperatures are desired by urban planners and architects for strategic urban designs at the early design stages. This paper introduces a simplified mathematical model for urban simulations (UMsim) including urban surfaces temperatures and microclimates. The nodal network model has been developed by integrating coupled thermal and airflow model. Direct solar radiation, diffuse radiation, reflected radiation, long-wave radiation, heat convection in air and heat transfer in the exterior walls and ground within the complex have been taken into account. The relevant equations have been solved using the finite difference method under the Matlab platform. Comparisons have been conducted between the data produced from the simulation and that from an urban experimental study carried out in a real architectural complex on the campus of Chongqing University, China in July 2005 and January 2006. The results show a satisfactory agreement between the two sets of data. The UMsim can be used to simulate the microclimates, in particular the surface temperatures of urban blocks, therefore it can be used to assess the impact of urban surfaces properties on urban microclimates. The UMsim will be able to produce robust data and images of urban environments for sustainable urban design.

Community mix, affordable housing and metropolitan planning strategy in Melbourne

Income segregation across Melbourne’s residential communities is widening, and at a pace faster than in some other Australian cities. The widening gap between Melbourne’s rich and poor communities raises fears about concentrations of poverty and social exclusion, particularly if the geography of these communities is such that they and their residents are increasingly isolated from urban services and employment centres. Social exclusion in our metropolitan areas and the government responses to it are commonly thought to be the proper domain of social and economic policy. The role of urban planning is typically neglected, yet it helps shape the economic opportunities available to communities in its attempts to influence the geographical location of urban services, infrastructure and jobs. Under the current metropolitan strategy ‘Melbourne 2030’ urban services and transport infrastructure are to be concentrated within Principal Activity Centres spread throughout the metropolitan area and it is the intention that lower-income households should have ready access to these activity centres. However, the Victorian state government has few housing policy instruments to achieve this goal and there are fears that community mix may suffer as house prices and rents are bid up in the vicinity of Principal Activity Centres, and lower-income households are displaced. But are these fears justified by the changing geography of house prices in the metropolitan region? This is the key research question addressed in this paper which examines whether the Victorian practice of placing reliance on the market to deliver affordable housing, while intervening to promote a more compact pattern of urban settlement, is effective.

Geographical concentration in the institutional market for office property in England and Wales

This paper examines the regional investment practices of institutional investors in the commercial real estate office market in 1998 and 2003 in England and Wales. Consistent with previous studies in the US the findings show that investors concentrate their holdings in a few (urban) areas and that this concentration has become more pronounced as investors have rationalised their portfolio holdings. The findings also indicate that office investment does not fully correlate with the UK urban hierarchy, as measured by population, but is focused on urban areas with high service sector employment. Finally, the pre-eminence of the City of London and and West End office markets as the key focus of institutional investment is confirmed.

Integration and segmentation in European investment services markets: assessing the implications for international real estate investment

This paper analyses developments in the growth and configuration of the institutional savings markets within the European Union. The paper discusses the changing socio-economic context in which investment services within the EU are being delivered. The is followed by an examination of drivers of market integration such as the growth and consolidation of the fund management industry, the demographic and fiscal pressures for reform of pensions markets and the process and effects of the deregulation of investment services markets. There is a review of outstanding sources of market segmentation. The projections for future growth in pensions are outlined and implications for real estate investment assessed. It is concluded that, although numerous imponderables render reliable quantitative projections problematic, growth and restructuring of the institutional savings market is likely to increase cross-border capital flows to real estate markets.

The domestic garden: its contribution to urban green infrastructure

Domestic gardens provide a significant component of urban green infrastructure but their relative contribution to eco-system service provision remains largely un-quantified. ‘Green infrastructure’ itself is often ill-defined, posing problems for planners to ascertain what types of green infrastructure provide greatest benefit and under what circumstances. Within this context the relative merits of gardens are unclear; however, at a time of greater urbanization where private gardens are increasingly seen as a ‘luxury’, it is important to define their role precisely. Hence, the nature of this review is to interpret existing information pertaining to gardens /gardening per se, identify where they may have a unique role to play and to highlight where further research is warranted. The review suggests that there are significant differences in both form and management of domestic gardens which radically influence the benefits. Nevertheless, gardens can play a strong role in improving the environmental impact of the domestic curtilage, e.g. by insulating houses against temperature extremes they can reduce domestic energy use. Gardens also improve localized air cooling, help mitigate flooding and provide a haven for wildlife. Less favourable aspects include contributions of gardens and gardening to greenhouse gas emissions, misuse of fertilizers and pesticides, and introduction of alien plant species. Due to the close proximity to the home and hence accessibility for many, possibly the greatest benefit of the domestic garden is on human health and well-being, but further work is required to define this clearly within the wider context of green infrastructure.

Simulation of urban microclimates

Urban microclimates are greatly affected by urban form and texture and have a significant impact on building energy performance. The impact of urban form on energy consumption in buildings mainly relates to the availability of the uses of solar radiation, daylighting and natural ventilation. The urban heat island (UHI) effect increases the risk of overheating in buildings as well as the maximum energy demand for cooling. A need has arisen for a robust calculation tool (using the first-cut calculation method) to enable planners, architects and environmental assessors, to quickly and accurately compare the impact of different urban forms on local climate and UHI mitigation strategies. This paper describes a tool for the simulation of urban microclimates, which is developed by integrating image processing with a coupled thermal and airflow model.

Community involvement in urban design: help or hindrance?

This paper examines the realities of community involvement in urban design in the context of a study of the West Itchen Neighbourhood of Southampton, a diverse inner city area accommodating some 7,000 households and 18,000 people. The findings are based on a literature review of community involvement in urban design and case study research into three government supported regeneration projects all located within the study area: a Neighbourhood Renewal Area - designated in 1994; an Estate Action Scheme - implemented between 1993 and 1996; and a Single Regeneration Budget programme - following a successful bid in 1995. The research was undertaken by Helen Gregory in 1997/8 as the basis of a dissertation, supervised by Alan Rowley, submitted for the award of an MPhil in Environmental Planning and Development from The University of Reading.

PPG13 and the residential developer

This paper reviews the evidence in favour of the compact city and considers whether it is a viable policy option. Environmentalists, acadenics and politicians have all expressed strong support for the compact city as a basis for sustainable development. A review of the literature broadly confirms the claims made on its behalf, in particular that it is energy efficient and that it plays a crucial role in preventing rural land loss. It is further shown i) that there is nothing inevitable about the established pattern of urban dispersal, and ii) that although urban land is charaterised by a number of contstraints on development,it could in principle satisfy much of the projected demand for housing. Yet urban sprawl continues. Some of the reasons for this in the case of residential development are examined by comparing the residential development process with the principles of sustainable development. The general conclusion of the paper is that proposals for urban containment are likely to be strongly resisted by housebuilders.

The domestication of water: water management in the ancient world and its prehistoric origins in the Jordan Valley

The ancient civilizations were dependent upon sophisticated systems of water management. The hydraulic engineering works found in ancient Angkor (ninth to thirteenth century AD), the Aztec city of Tenochtitlan (thirteenth to fifteenth century AD), Byzantine Constantinople (fourth to sixth century AD) and Nabatean Petra (sixth century BC to AD 106) are particularly striking because each of these is in localities of the world that are once again facing a water crisis. Without water management, such ancient cities would never have emerged, nor would the urban communities and towns from which they developed. Indeed, the ‘domestication’ of water marked a key turning point in the cultural trajectory of each region of the world where state societies developed. This is illustrated by examining the prehistory of water management in the Jordan Valley, identifying the later Neolithic (approx. 8300–6500 years ago) as a key period when significant investment in water management occurred, laying the foundation for the development of the first urban communities of the Early Bronze Age.

Sustainable urban development to 2050: complex transitions in the built environment of cities

The majority of the world’s population now live in cities. This poses great challenges, but also great opportunities in terms of tackling climate change, resource depletion and environmental degradation. Policy agendas have increasingly focused on how to develop and maintain ‘integrated sustainable urban development’, and a number of theoretical conceptualisations of urban transition have been formulated to help our thinking and understanding in both developed and developing countries. Drawing on examples around the world the paper aims to examine the key ‘critical success factors’ that need to be in place for cities to traverse a pathway to a more sustainable future in urban development terms by 2050. The paper explores how important the issues of ‘scale’ is in the context of complexity and fragmentation in the city’s built environment, identifies the lessons that can be learned for future sustainable urban development, and the further research which is needed to address future urban transitions to 2050.

Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.