Numerical study of a M-cycle cross-flow heat exchanger for indirect evaporative cooling

In this paper, numerical analyses of the thermal performance of an indirect evaporative air cooler incorporating a M-cycle cross-flow heat exchanger has been carried out. The numerical model was established from solving the coupled governing equations for heat and mass transfer between the product and working air, using the finite-element method. The model was developed using the EES (Engineering Equation Solver) environment and validated by published experimental data. Correlation between the cooling (wet-bulb) effectiveness, system COP and a number of air flow/exchanger parameters was developed. It is found that lower channel air velocity, lower inlet air relative humidity, and higher working-to-product air ratio yielded higher cooling effectiveness. The recommended average air velocities in dry and wet channels should not be greater than 1.77 m/s and 0.7 m/s, respectively. The optimum flow ratio of working-to-product air for this cooler is 50%. The channel geometric sizes, i.e. channel length and height, also impose significant impact to system performance. Longer channel length and smaller channel height contribute to increase of the system cooling effectiveness but lead to reduced system COP. The recommend channel height is 4 mm and the dimensionless channel length, i.e., ratio of the channel length to height, should be in the range 100 to 300. Numerical study results indicated that this new type of M-cycle heat and mass exchanger can achieve 16.7% higher cooling effectiveness compared with the conventional cross-flow heat and mass exchanger for the indirect evaporative cooler. The model of this kind is new and not yet reported in literatures. The results of the study help with design and performance analyses of such a new type of indirect evaporative air cooler, and in further, help increasing market rating of the technology within building air conditioning sector, which is currently dominated by the conventional compression refrigeration technology.

(In)Complete acquisition of Turkish among Turkish German bilinguals in Germany and Turkey: an analysis of complex embeddings in narratives

Although most researchers recognise that the language repertoire of bilinguals canmvary, few studies have tried to address variation in bilingual competence in any detail. This study aims to take a first step towards further understanding the way in which bilingual competencies can vary at the level of syntax by comparing the use of syntactic embeddings among three different groups of Turkish�German bilinguals. The approach of the present paper is new in that different groups of bilinguals are compared with each other, and not only with monolingual speakers, as is common in most studies in the field. The analysis focuses on differences in the use of embeddings in Turkish, which are generally considered to be one of the more complex aspects of Turkish grammar. The study shows that young Turkish� German bilingual adults who were born and raised in Germany use fewer, and less complex embeddings than Turkish�German bilingual returnees who had lived in Turkey for eight years at the time of recording. The present study provides new insights in the nature of bilingual competence, as well as a new perspective on syntactic change in immigrant Turkish as spoken in Europe.

A survey of human motion analysis using depth imagery

Analysis of human behaviour through visual information has been a highly active research topic in the computer vision community. This was previously achieved via images from a conventional camera, but recently depth sensors have made a new type of data available. This survey starts by explaining the advantages of depth imagery, then describes the new sensors that are available to obtain it. In particular, the Microsoft Kinect has made high-resolution real-time depth cheaply available. The main published research on the use of depth imagery for analysing human activity is reviewed. Much of the existing work focuses on body part detection and pose estimation. A growing research area addresses the recognition of human actions. The publicly available datasets that include depth imagery are listed, as are the software libraries that can acquire it from a sensor. This survey concludes by summarising the current state of work on this topic, and pointing out promising future research directions.

Similarity solutions describing the melting of a mushy layer

A model of the melting of a mushy region in the absence of fluid flow is presented. Similarity solutions are obtained which are used to describe melting from a hot plate with and without the generation of a completely molten region. These solutions are extended to describe the melting of a mushy region in contact with a hot liquid. A significant feature of melting mushy regions is that the phase change occurs internally by dissolution. Our solutions for melting of a mushy region are used to investigate this internal phase change and are compared with the classical Neumann solutions for melting of a pure substance.

Detecting abnormal and collusive bids in capped tendering

Recent developments in the area of Bid Tender Forecasting have enabled bidders to implement new types of easy-to-use tools for increasing their chances of winning contracts. Although these new tools (such as iso-Score Curve Graphs, Scoring Probability Graphs, and Position Probability Graphs) are designed for bidders in capped tendering (tenders with an upper price limit), some of their principles can also be applied by a Contracting Authority to detect which bidders do not follow a standard pattern, that is, their bids are extremely high or low. Since a collusive bid generally needs to be sufficiently high or low to make an impact on the bid distribution, any person in charge of supervising capped tenders can be alerted to any bidder that might be involved in a cartel after identifying the same abnormal behavior in a series of tenders through simple calculations and a new type of graph.

Lateral phase separation in grafted diblock copolymer films

Tethered films of polystyrene-block-poly(methyl methacrylate) copolymers of varying composition and molecular weight were investigated using atomic force microscopy and the observed structures compared with theoretical predictions. Although the experimental results were in qualitative agreement with the theory, there was significant quantitative variation. This was attributed to the presence of solvent in the films prior to and during annealing, a hypothesis supported by new preliminary calculations reported here. Solvent exchange experiments (where a good solvent for both polymer blocks was gradually replaced by a selective solvent), were also performed on the films. This procedure generated textured films in which the structure was defined by miscibility of the polymer blocks with the second solvent.