Subspace-based blind adaptive multiuser detection for multirate DS/CDMA signals

The existing dual-rate blind linear detectors, which operate at either the low-rate (LR) or the high-rate (HR) mode, are not strictly blind at the HR mode and lack theoretical analysis. This paper proposes the subspace-based LR and HR blind linear detectors, i.e., bad decorrelating detectors (BDD) and blind MMSE detectors (BMMSED), for synchronous DS/CDMA systems. To detect an LR data bit at the HR mode, an effective weighting strategy is proposed. The theoretical analyses on the performance of the proposed detectors are carried out. It has been proved that the bit-error-rate of the LR-BDD is superior to that of the HR-BDD and the near-far resistance of the LR blind linear detectors outperforms that of its HR counterparts. The extension to asynchronous systems is also described. Simulation results show that the adaptive dual-rate BMMSED outperform the corresponding non-blind dual-rate decorrelators proposed by Saquib, Yates and Mandayam (see Wireless Personal Communications, vol. 9, p.197-216, 1998).

Identifying likely successful users of virtual reality systems

This paper suggests a method for identifying individuals who are most suited to using virtual reality (VR) systems. The aim is to help both an individual or employer to decide where that individual's skills and abilities would be best deployed. By considering a potential user's competence and temperament, a graphical representation is introduced that may then be used to crudely delineate a high-aptitude participant against those with lesser capabilities. By introducing standard tests for competence and a standard classifier for temperament, and by further weighting each measure with respect to the technology currently available and the application, a detailed representation of the effectiveness of different users is developed.

Model predictive control using dynamic integrated system optimisation and parameter estimation (DISOPE)

DISOPE is a technique for solving optimal control problems where there are differences in structure and parameter values between reality and the model employed in the computations. The model reality differences can also allow for deliberate simplification of model characteristics and performance indices in order to facilitate the solution of the optimal control problem. The technique was developed originally in continuous time and later extended to discrete time. The main property of the procedure is that by iterating on appropriately modified model based problems the correct optimal solution is achieved in spite of the model-reality differences. Algorithms have been developed in both continuous and discrete time for a general nonlinear optimal control problem with terminal weighting, bounded controls and terminal constraints. The aim of this paper is to show how the DISOPE technique can aid receding horizon optimal control computation in nonlinear model predictive control.

Commuting, CO2 and the location of offices

This paper investigates the extent to which office activity contributes to travel-related CO2 emission. Using ‘end-user’ figures[1], travel accounts for 32% of UK CO2 emission (Commission for Integrated Transport, 2007) and commuting and business travel accounts for a fifth of transport-related CO2 emissions, equating to 6.4% of total UK emissions (Building Research Establishment, 2000). Figures from the Department for Transport (2006) report that 70% of commuting trips were made by car, accounting for 73% of all commuting miles travelled. In assessing the environmental performance of an office building, the paper questions whether commuting and business travel-related CO2 emission is being properly assessed. For example, are office buildings in locations that are easily accessible by public transport being sufficiently rewarded? The de facto method for assessing the environmental performance of office buildings in the UK is the Building Research Establishment’s Environmental Assessment Method (BREEAM). Using data for Bristol, this paper examines firstly whether BREEAM places sufficient weight on travel-related CO2 emission in comparison with building operation-related CO2 emission, and secondly whether the methodology for assigning credits for travel-related CO2 emission efficiency is capable of discerning intra-urban differences in location such as city centre and out-of-town. The results show that, despite CO2 emission per worker from building operation and travel being comparable, there is a substantial difference in the credit-weighting allocated to each. Under the current version of BREEAM for offices, only a maximum of 4% of the available credits can be awarded for ensuring the office location is environmentally sustainable. The results also show that all locations within the established city centre of Bristol will receive maximum BREEAM credits. Given the parameters of the test there is little to distinguish one city centre location from another and out of town only one office location receives any credits. It would appear from these results that the assessment method is not able to discern subtle differences in the sustainability of office locations

Moisture vertical structure, column water vapor, and tropical deep convection

The vertical structure of the relationship between water vapor and precipitation is analyzed in 5 yr of radiosonde and precipitation gauge data from the Nauru Atmospheric Radiation Measurement (ARM) site. The first vertical principal component of specific humidity is very highly correlated with column water vapor (CWV) and has a maximum of both total and fractional variance captured in the lower free troposphere (around 800 hPa). Moisture profiles conditionally averaged on precipitation show a strong association between rainfall and moisture variability in the free troposphere and little boundary layer variability. A sharp pickup in precipitation occurs near a critical value of CWV, confirming satellite-based studies. A lag–lead analysis suggests it is unlikely that the increase in water vapor is just a result of the falling precipitation. To investigate mechanisms for the CWV–precipitation relationship, entraining plume buoyancy is examined in sonde data and simplified cases. For several different mixing schemes, higher CWV results in progressively greater plume buoyancies, particularly in the upper troposphere, indicating conditions favorable for deep convection. All other things being equal, higher values of lower-tropospheric humidity, via entrainment, play a major role in this buoyancy increase. A small but significant increase in subcloud layer moisture with increasing CWV also contributes to buoyancy. Entrainment coefficients inversely proportional to distance from the surface, associated with mass flux increase through a deep lower-tropospheric layer, appear promising. These yield a relatively even weighting through the lower troposphere for the contribution of environmental water vapor to midtropospheric buoyancy, explaining the association of CWV and buoyancy available for deep convection.

A method to weight three categories of adaptive thermal comfort

The adaptive thermal comfort theory considers people as active rather than passive recipients in response to ambient physical thermal stimuli, in contrast with conventional, heat-balance-based, thermal comfort theory. Occupants actively interact with the environments they occupy by means of utilizing adaptations in terms of physiological, behavioural and psychological dimensions to achieve ‘real world’ thermal comfort. This paper introduces a method of quantifying the physiological, behavioural and psychological portions of the adaptation process by using the analytic hierarchy process (AHP) based on the case studies conducted in the UK and China. Apart from three categories of adaptations which are viewed as criteria, six possible alternatives are considered: physiological indices/health status, the indoor environment, the outdoor environment, personal physical factors, environmental control and thermal expectation. With the AHP technique, all the above-mentioned criteria, factors and corresponding elements are arranged in a hierarchy tree and quantified by using a series of pair-wise judgements. A sensitivity analysis is carried out to improve the quality of these results. The proposed quantitative weighting method provides researchers with opportunities to better understand the adaptive mechanisms and reveal the significance of each category for the achievement of adaptive thermal comfort.

A holistic method to assess building energy efficiency combining D-S theory and the evidential reasoning approach

The assessment of building energy efficiency is one of the most effective measures for reducing building energy consumption. This paper proposes a holistic method (HMEEB) for assessing and certifying building energy efficiency based on the D-S (Dempster-Shafer) theory of evidence and the Evidential Reasoning (ER) approach. HMEEB has three main features: (i) it provides both a method to assess and certify building energy efficiency, and exists as an analytical tool to identify improvement opportunities; (ii) it combines a wealth of information on building energy efficiency assessment, including identification of indicators and a weighting mechanism; and (iii) it provides a method to identify and deal with inherent uncertainties within the assessment procedure. This paper demonstrates the robustness, flexibility and effectiveness of the proposed method, using two examples to assess the energy efficiency of two residential buildings, both located in the ‘Hot Summer and Cold Winter’ zone in China. The proposed certification method provides detailed recommendations for policymakers in the context of carbon emission reduction targets and promoting energy efficiency in the built environment. The method is transferable to other countries and regions, using an indicator weighting system to modify local climatic, economic and social factors.

Do responsible real estate companies outperform their peers?

This paper investigates the relationship between corporate social and environmental performance and financial performance for a sample of publicly traded US real estate companies. Using the MSCI ESG (formerly KLD) database on seven Environmental, Social & Governance dimensions in the 2003-2010 period, and weighting the dimensions according to prominence in the real estate sector, we model Tobin's Q and annual total return in a panel data framework. The results indicate a positive relationship between ESG rating and Tobin's Q but this effect is driven by ESG concerns rather than strengths. Consistently across all model specifications, overall ESG ratings are associated with lower returns. Negative scores appear to result in higher returns in the short run but positive scores have no significant impact on returns.

Time weighted portfolio optimisation

In estimating the inputs into the Modern Portfolio Theory (MPT) portfolio optimisation problem, it is usual to use equal weighted historic data. Equal weighting of the data, however, does not take account of the current state of the market. Consequently this approach is unlikely to perform well in any subsequent period as the data is still reflecting market conditions that are no longer valid. The need for some return-weighting scheme that gives greater weight to the most recent data would seem desirable. Therefore, this study uses returns data which are weighted to give greater weight to the most recent observations to see if such a weighting scheme can offer improved ex-ante performance over that based on un-weighted data.

Portfolio size and the reduction of dispersion: the case of the United Kingdom commercial real estate market

This paper investigates the potential benefits and limitations of equal and value-weighted diversification using as the example the UK institutional property market. To achieve this it uses the largest sample (392) of actual property returns that is currently available, over the period 1981 to 1996. To evaluate these issues two approaches are adopted; first, an analysis of the correlations within the sectors and regions and secondly simulations of property portfolios of increasing size constructed both naively and with value-weighting. Using these methods it is shown that the extent of possible risk reduction is limited because of the high positive correlations between assets in any portfolio, even when naively diversified. It is also shown that portfolios exhibit high levels of variability around the average risk, suggesting that previous work seriously understates the number of properties needed to achieve a satisfactory level of diversification. The results have implications for the development and maintenance of a property portfolio because they indicate that the achievable level of risk reduction depends upon the availability of assets, the weighting system used and the investor’s risk tolerance.

Transaction based indices for the UK commercial real estate market: an exploration using IPD transaction data

The nature of private commercial real estate markets presents difficulties for monitoring market performance. Assets are heterogeneous and spatially dispersed, trading is infrequent and there is no central marketplace in which prices and cash flows of properties can be easily observed. Appraisal based indices represent one response to these issues. However, these have been criticised on a number of grounds: that they may understate volatility, lag turning points and be affected by client influence issues. Thus, this paper reports econometrically derived transaction based indices of the UK commercial real estate market using Investment Property Databank (IPD) data, comparing them with published appraisal based indices. The method is similar to that presented by Fisher, Geltner, and Pollakowski (2007) and used by Massachusett, Institute of Technology (MIT) on National Council of Real Estate Investment Fiduciaries (NCREIF) data, although it employs value rather than equal weighting. The results show stronger growth from the transaction based indices in the run up to the peak in the UK market in 2007. They also show that returns from these series are more volatile and less autocorrelated than their appraisal based counterparts, but, surprisingly, differences in turning points were not found. The conclusion then debates the applications and limitations these series have as measures of market performance.

Whole life carbon – a building case study

There is potential to reduce both operational and embodied greenhouse gas emission from buildings. To date the focus has been on reducing the operational element, although given the urgency of carbon reductions, it may be more beneficial to consider upfront embodied carbon reductions. This paper describes a case study on the whole life carbon cycle of a warehouse building in Swindon, UK. It examines the relationship between embodied carbon (Ec) and operational carbon (Oc), the proportions of Ec from the structural and non-structural elements, carbon benchmarking of the structure, the value of ‘cradle to site’ or ‘cradle to grave’ assessments and the significance of the timing of emissions during the life of the building. The case study indicates that Ec was dominant for the building and that the structure was responsible for more than half of the Ec. Weighting of future emissions appears to be an important factor to consider. The PAS 2050 reduction factors had only a modest effect but weighting to allow for future decarbonisation of the national grid energy supply had a large effect. This suggests that future operational carbon emissions are being overestimated compared to embodied.

Accommodation and vergence response gains to different near cues characterize specific esotropias

Aim. To describe preliminary findings of how the profile of the use of blur, disparity and proximal cues varies between non-strabismic groups and those with different types of esotropia. Design. Case control study Methodology. A remote haploscopic photorefractor measured simultaneous convergence and accommodation to a range of targets containing all combinations of binocular disparity, blur and proximal (looming) cues. 13 constant esotropes, 16 fully accommodative esotropes, and 8 convergence excess esotropes were compared with age and refractive error matched controls, and 27 young adult emmetropic controls. All wore full refractive correction if not emmetropic. Response AC/A and CA/C ratios were also assessed. Results. Cue use differed between the groups. Even esotropes with constant suppression and no binocular vision (BV) responded to disparity in cues. The constant esotropes with weak BV showed trends for more stable responses and better vergence and accommodation than those without any BV. The accommodative esotropes made less use of disparity cues to drive accommodation (p=0.04) and more use of blur to drive vergence (p=0.008) than controls. All esotropic groups failed to show the strong bias for better responses to disparity cues found in the controls, with convergence excess esotropes favoring blur cues. AC/A and CA/C ratios existed in an inverse relationship in the different groups. Accommodative lag of >1.0D at 33cm was common (46%) in the pooled esotropia groups compared with 11% in typical children (p=0.05). Conclusion. Esotropic children use near cues differently from matched non-esotropic children in ways characteristic to their deviations. Relatively higher weighting for blur cues was found in accommodative esotropia compared to matched controls.

CUP Intermediate Greek-English Lexicon

Document design and typeface design: A typographic specification for a new Intermediate Greek-English Lexicon by CUP, accompanied by typefaces modified for the specific typographic requirements of the text. The Lexicon is a substantial (over 1400 pages) publication for HE students and academics intended to complement Liddell-Scott (the standard reference for classical Greek since the 1850s), and has been in preparation for over a decade. The typographic appearance of such works has changed very little since the original editions, largely to the lack of suitable typefaces: early digital proofs of the Lexicon utilised directly digitised versions of historical typefaces, making the entries difficult to navigate, and the document uneven in typographic texture. Close collaboration with the editors of the Lexicon, and discussion of the historical precedents for such documents informed the design at all typographic levels to achieve a highly reader-friendly results that propose a model for this kind of typography. Uniquely for a work of this kind, typeface design decisions were integrated into the wider document design specification. A rethinking of the complex typography for Greek and English based on historical editions as well as equivalent bilingual reference works at this level (from OUP, CUP, Brill, Mondadori, and other publishers) led a redefinition of multi-script typeface pairing for the specific context, taking into account recent developments in typeface design. Specifically, the relevant weighting of elements within each entry were redefined, as well as the typographic texture of type styles across the two scripts. In details, Greek typefaces were modified to emphasise clarity and readability, particularly of diacritics, at very small sizes. The relative weights of typefaces typeset side-by-side were fine-tuned so that the visual hierarchy of the entires was unambiguous despite the dense typesetting.

Fusion of infrared polarization and intensity images using support value transform and fuzzy combination rules

Infrared polarization and intensity imagery provide complementary and discriminative information in image understanding and interpretation. In this paper, a novel fusion method is proposed by effectively merging the information with various combination rules. It makes use of both low-frequency and highfrequency images components from support value transform (SVT), and applies fuzzy logic in the combination process. Images (both infrared polarization and intensity images) to be fused are firstly decomposed into low-frequency component images and support value image sequences by the SVT. Then the low-frequency component images are combined using a fuzzy combination rule blending three sub-combination methods of (1) region feature maximum, (2) region feature weighting average, and (3) pixel value maximum; and the support value image sequences are merged using a fuzzy combination rule fusing two sub-combination methods of (1) pixel energy maximum and (2) region feature weighting. With the variables of two newly defined features, i.e. the low-frequency difference feature for low-frequency component images and the support-value difference feature for support value image sequences, trapezoidal membership functions are proposed and developed in tuning the fuzzy fusion process. Finally the fused image is obtained by inverse SVT operations. Experimental results of visual inspection and quantitative evaluation both indicate the superiority of the proposed method to its counterparts in image fusion of infrared polarization and intensity images.