Performance evaluation of wall mounted convector for pre-heating naturally ventilated spaces

This paper presents the results of performance monitoring under real winter weather conditions, controlled laboratory testing and computational fluid dynamics (CFD) analysis of a wall mounted ventilation air inlet heat convector. For real winter weather monitoring, the wall-mounted convector was installed in a laboratory room of the Engineering Building of the School of Construction Management and Engineering. Air and hot water temperatures and air speeds were measured at the entrance to the convector and in the room. The hot water temperature was controlled at 40, 60 and 80 °C. The monitoring results were later used as boundary conditions for a CFD simulation to investigate the air movement in the room. Controlled laboratory testing was conducted in laboratories at the University of Reading, UK and at Wetterstad Consultancy, Sweden. The results of the performance investigation showed that the system contributed greatly to the room heating, particularly at a water temperature of 80 °C. Also adequate fresh air was supplied to the room. Such a system is able to provide an energy efficient method of eliminating problems associated with cold winter draughts.

Evolution of the eye-end design of a composite leaf spring for heavy axle loads

This paper presents the design evolution process of a composite leaf spring for freight rail applications. Three designs of eye-end attachment for composite leaf springs are described. The material used is glass fibre reinforced polyester. Static testing and finite element analysis have been carried out to obtain the characteristics of the spring. Load-deflection curves and strain measurement as a function of load for the three designs tested have been plotted for comparison with FEA predicted values. The main concern associated with the first design is the delamination failure at the interface of the fibres that have passed around the eye and the spring body, even though the design can withstand 150 kN static proof load and one million cycles fatigue load. FEA results confirmed that there is a high interlaminar shear stress concentration in that region. The second design feature is an additional transverse bandage around the region prone to delamination. Delamination was contained but not completely prevented. The third design overcomes the problem by ending the fibres at the end of the eye section.

Impact damage characterisation of thermoplastic matrix composites using transmission transient thermography

In this work, IR thermography is used as a non-destructive tool for impact damage characterisation on thermoplastic E-glass/polypropylene composites for automotive applications. The aim of this experimentation was to compare impact resistance and to characterise damage patterns of different laminates, in order to provide indications for their use in components. Two E-glass/polypropylene composites, commingled ®Twintex (with three different weave structures: directional, balanced and 3-D) and random reinforced GMT, were in particular characterised. Directional and balanced Twintex were also coupled in a number of hybrid configurations with GMT to evaluate the possible use of GMT/Twintex hybrids in high-energy absorption components. The laminates were impacted using a falling weight tower, with impact energies ranging from 15 J to penetration. Using IR thermography during cooling down following a long pulse (3 s), impact damaged areas were characterised and the influence of weave structure on damage patterns was studied. IR thermography offered good accuracy for laminates with thickness not exceeding 3.5 mm: this appears to be a limit for the direct use of this method on components, where more refined signal treatment would probably be needed for impact damage characterisation.

Actinomyces coleocanis sp. nov., from the vagina of a dog

A hitherto undescribed Actinomyces-like bacterium was isolated from the vagina of a dog. Biochemical testing and PAGE analysis of whole-cell proteins indicated that the isolate was phenotypically different from previously described Actinomyces species and related taxa. Sequencing of 165 rRNA showed that the unknown bacterium was distinct from all currently known Actinomyces species. Phylogenetically, the unidentified organism displayed a specific association with Actinomyces europaeus, but a sequence divergence of > 5% demonstrated that it represents a distinct species. Based on both phenotypic and 165 rRNA sequence considerations, it is proposed that the unknown strain from a dog be classified as a novel species, Actinomyces coleocanis sp. nov. The type strain is CCUG 41708T (= CIP 106873T).

Actinomyces marimammalium sp. nov., from marine mammals

Three strains of a previously undescribed Actinomyces-like bacterium were isolated from samples taken from two dead seals and a porpoise. Biochemical testing and PAGE analysis of whole-cell proteins indicated the strains were phenotypically similar to each other but different from previously described Actinomyces and Arcanobacterium species. Comparative 16S rRNA gene sequencing studies showed the organisms from marine animals were genetically closely related and represent a hitherto unknown subline within the genus Actinomyces (sequence divergence values > 6% with recognized species). Based on phylogenetic and phenotypic evidence it is proposed that the unknown bacterium from the seals and a porpoise should be classified as Actinomyces marimammalium sp. nov. The type strain is CCUG 41710T.

Characterization of Actinomyces isolates from infected root canals of teeth: description of Actinomyces radicidentis sp. nov.

Two strains of a previously undescribed Actinomyces-like bacterium were recovered in pure culture from infected root canals of teeth. Analysis by biochemical testing and polyacrylamide gel electrophoresis of whole-cell proteins indicated that the strains closely resembled each other phenotypically but were distinct from previously described Actinomyces and Arcanobacterium species. Comparative 16S rRNA gene-sequencing studies showed the bacterium to be a hitherto unknown subline within a group of Actinomyces species which includes Actinomyces bovis, the type species of the genus. Based on phylogenetic and phenotypic evidence, we propose that the unknown bacterium isolated from human clinical specimens be classified as Actinomyces radicidentis sp. nov. The type strain of Actinomyces radicidentis is CCUG 36733.

Characterization of Actinomyces isolates from samples from the human urogenital tract: description of Actinomyces urogenitalis sp. nov.

Three strains of a previously undescribed Actinomyces-like bacterium were isolated from human clinical sources (urine, urethra and vaginal secretion). Biochemical testing and PAGE analysis of whole-cell proteins indicated that the strains were phenotypically homogeneous and distinct from previously described Actinomyces and Arcanobacterium species. Comparative 16S rRNA gene sequencing studies showed the bacterium to be a hitherto unknown subline within a group of Actinomyces species which includes Actinomyces bovis, the type species of the genus. Based on phylogenetic and phenotypic evidence it is proposed that the unknown bacterium from humans be classified as Actinomyces urogenitalis sp. nov. The type strain of Actinomyces urogenitalis is CCUG 38702T (= CIP 106421T).

Actinomyces canis sp. nov., isolated from dogs

Three strains of a previously undescribed catalase-positive Actinomyces-like bacterium were isolated from dogs. Biochemical testing and PAGE analysis of whole-cell proteins indicated that the strains were phenotypically highly related to each other but different from previously described Actinomyces and Arcanobacterium species. Sequencing of 16S rRNA showed that the unknown bacterium represents a new subline within a cluster of species which includes Actinomyces hyovaginalis, Actinomyces georgiae, Actinomyces meyeri, Actinomyces odontolyticus, Actinomyces radingae and Actinomyces turicensis. On the basis of phenotypic evidence and 16S rRNA sequence divergence levels (greater than 5% with recognized Actinomyces species) it is proposed that the unknown strains from canine sources be classified as a new species with the name Actinomyces canis sp. nov. The type strain of Actinomyces canis is CCUG 41706T (= CIP 106351T).

Features for detection of Parkinson's disease tremor from local field potentials of the subthalamic nucleus

Deep Brain Stimulation (DBS) is a treatment routinely used to alleviate the symptoms of Parkinson's disease (PD). In this type of treatment, electrical pulses are applied through electrodes implanted into the basal ganglia of the patient. As the symptoms are not permanent in most patients, it is desirable to develop an on-demand stimulator, applying pulses only when onset of the symptoms is detected. This study evaluates a feature set created for the detection of tremor - a cardinal symptom of PD. The designed feature set was based on standard signal features and researched properties of the electrical signals recorded from subthalamic nucleus (STN) within the basal ganglia, which together included temporal, spectral, statistical, autocorrelation and fractal properties. The most characterized tremor related features were selected using statistical testing and backward algorithms then used for classification on unseen patient signals. The spectral features were among the most efficient at detecting tremor, notably spectral bands 3.5-5.5 Hz and 0-1 Hz proved to be highly significant. The classification results for determination of tremor achieved 94% sensitivity with specificity equaling one.

On computational algorithms for pole assignment

A number of computationally reliable direct methods for pole assignment by feedback have recently been developed. These direct procedures do not necessarily produce robust solutions to the problem, however, in the sense that the assigned poles are insensitive to perturbalions in the closed-loop system. This difficulty is illustrated here with results from a recent algorithm presented in this TRANSACTIONS and its causes are examined. A measure of robustness is described, and techniques for testing and improving robustness are indicated.

Modelling of Johne's disease control options in beef cattle: a decision support approach

Johne's disease in cattle is a contagious wasting disease caused by Mycobacterium avium subspecies paratuberculosis (MAP). Johne's infection is characterised by a long subclinical phase and can therefore go undetected for long periods of time during which substantial production losses can occur. The protracted nature of Johne's infection therefore presents a challenge for both veterinarians and farmers when discussing control options due to a paucity of information and limited test performance when screening for the disease. The objectives were to model Johne's control decisions in suckler beef cattle using a decision support approach, thus implying equal focus on ‘end user’ (veterinarian) participation whilst still focusing on the technical disease modelling aspects during the decision support model development. The model shows how Johne's disease is likely to affect a herd over time both in terms of physical and financial impacts. In addition, the model simulates the effect on production from two different Johne's control strategies; herd management measures and test and cull measures. The article also provides and discusses results from a sensitivity analysis to assess the effects on production from improving the currently available test performance. Output from running the model shows that a combination of management improvements to reduce routes of infection and testing and culling to remove infected and infectious animals is likely to be the least-cost control strategy.

Brill Greek, Adobe Arno Pro, Adobe Text/Brevier Greek typefaces

Typeface design: a series of collaborative projects commissioned by Adobe, Inc. and Brill to develop extensive polytonic Greek typefaces. The two Adobe typefaces can be seen as extension of previous research for the Garamond Premier Pro family (2005), and concludes a research theme started in 1998 with work for Adobe’s Minion Pro Greek. These typefaces together define the state of the art for text-intensive Greek typesetting for wide character set texts (from classical texts, to poetry, to essays, to prose). They serve both as exemplar for other developers, and as vehicles for developing the potential of Greek text typography, for example with the parallel inclusion of monotonic and polytonic characters, detailed localised punctuation options, fluid handling of case-conversion issues, and innovative options such as accented small caps (originally requested by bibliographers, and subsequently rolled out to a general user base). The Brill typeface (for the established academic publisher) has an exceptionally wide character set to cover several academic disciplines, and is intended to differentiate sufficiently from its partner Latin typeface, while maintaining a clear texture in both offset and low-resolution print-on-demand reproduction. This work involved substantial amounts of testing and modifying the design, especially of diacritics, to maintain clarity the readability of unfamiliar words. All together these typefaces form a study in how Greek typesetting meets contemporary typographic requirements, while resonating with historically accurate styles, where these are present. Significant research in printing archives helped to identify appropriate styles, as well as originate variants that are coherent stylistically, even when historical equivalents were absent.

An insight into the public acceptance of nutrigenomic-based personalised nutrition.

It is predicted that non-communicable diseases will account for over 73 % of global mortality in 2020. Given that the majority of these deaths occur in developed countries such as the UK, and that up to 80 % of chronic disease could be prevented through improvements in diet and lifestyle, it is imperative that dietary guidelines and disease prevention strategies are reviewed in order to improve their efficacy. Since the completion of the human genome project our understanding of complex interactions between environmental factors such as diet and genes has progressed considerably, as has the potential to individualise diets using dietary, phenotypic and genotypic data. Thus, there is an ambition for dietary interventions to move away from population-based guidance towards 'personalised nutrition'. The present paper reviews current evidence for the public acceptance of genetic testing and personalised nutrition in disease prevention. Health and clear consumer benefits have been identified as key motivators in the uptake of genetic testing, with individuals reporting personal experience of disease, such as those with specific symptoms, being more willing to undergo genetic testing for the purpose of personalised nutrition. This greater perceived susceptibility to disease may also improve motivation to change behaviour which is a key barrier in the success of any nutrition intervention. Several consumer concerns have been identified in the literature which should be addressed before the introduction of a nutrigenomic-based personalised nutrition service. Future research should focus on the efficacy and implementation of nutrigenomic-based personalised nutrition.

Problem-based learning approaches in meteorology

Problem-Based Learning, despite recent controversies about its effectiveness, is used extensively as a teaching method throughout higher education. In meteorology, there has been little attempt to incorporate Problem-Based Learning techniques into the curriculum. Motivated by a desire to enhance the reflective engagement of students within a current field course module, this project describes the implementation of two test Problem-Based Learning activities and testing and improvement using several different and complementary means of evaluation. By the end of a 2-year program of design, implementation, testing, and reflection and re-evaluation, two robust, engaging activities have been developed that provide an enhanced and diverse learning environment in the field course. The results suggest that Problem-Based Learning techniques would be a useful addition to the meteorology curriculum and suggestions for courses and activities that may benefit from this approach are included in the conclusions.