Health and safety on construction sites in Ghana

The state of health and safety on construction sites in Ghana was investigated using first hand observation of fourteen (14) construction project sites in 2009 and 2010. At each site, the construction project, workers and the physical environment of the site were inspected and evaluated against health and safety indicators taken from the literature. The results reveal a poor state of health and safety on Ghanaian construction sites. The primary reasons are a lack of strong institutional framework for governing construction activities and poor enforcement of health and safety policies and procedures. Also, Ghanaian society does not place a high premium on health and safety of construction workers on site. Interviews with workers indicated that injuries and accidents are common on sites. However, compensation for injury is often at the discretion of the contractor although collective bargaining agreements between Labour unions and employers prescribe obligations for the contractor in the event of injury to a worker.

Animal health challenges and veterinary aspects of organic livestock farming identified through a 3 year EU network project

From 2003-2006, an EU network project ‘Sustaining Animal Health and Food Safety in Organic Farming' (SAFO), was carried out with 26 partners from 20 EU-countries and 4 related partners from 4 candidate or new member states. The focus was the integration of animal health and welfare issues in organic farming with food safety aspects. Four very consistent conclusions became apparent: 1) The climatic, physical and socio-economic conditions vary considerably throughout Europe, leading to different livestock farming systems. This limits the possibility for technology transfer between regions, and creates several challenges for a harmonised regulation, 2) Implementing organic standards at farm level does not always ensure that animal health and welfare reach the high ideals of the organic principles, 3) To overcome these deficiencies, organic farmers and farmer organisations need to take ownership of organic values and, 4) In all participating countries, a strong need for training of farmers and in particular veterinarians in animal health promotion and organic principles was identified. The article presents a summary of papers presented at the five SAFO workshops.

Innovation in facilities management: from trajectories to ownership

Purpose – Innovation in facilities management (FM) is a complex process as FM is a diverse discipline. This paper aims to use innovation trajectories to explore this complex process through the introduction of a technology innovation in two FM services of security and workspace management. It also aims to consider the discourse of individuals within their trajectory to understand their positions toward the innovation. Design/methodology/approach – A two-year case study was conducted and it was based in an in-house FM department that was part of a financial institution. The specific methods used for the paper were semi-structured interviews with key participants of the project. Critical discourse analysis was used to examine the data. Findings – Individuals who were involved in introducing the technology to the FM department were both internal and external to FM as innovation in FM does not happen in isolation to the organisation. Innovation trajectories were often intertwined or occurred simultaneously during the process of a project which sometimes resulted in conflict. Tensions within the discourse of ownership of the project were particularly apparent as this discourse had a power dimension in driving the project through to implementation. Research limitations/implications – The research is limited by being a single case study so it is not possible to generalise findings but the findings may have resonances with other organisations. Originality/value – The paper presents an original idea about how to understand innovation processes in FM services.

Do in vivo terahertz imaging systems comply with safety guidelines?

Techniques for the coherent generation and detection of electromagnetic radiation in the far infrared, or terahertz, region of the electromagnetic spectrum have recently developed rapidly and may soon be applied for in vivo medical imaging. Both continuous wave and pulsed imaging systems are under development, with terahertz pulsed imaging being the more common method. Typically a pump and probe technique is used, with picosecond pulses of terahertz radiation generated from femtosecond infrared laser pulses, using an antenna or nonlinear crystal. After interaction with the subject either by transmission or reflection, coherent detection is achieved when the terahertz beam is combined with the probe laser beam. Raster scanning of the subject leads to an image data set comprising a time series representing the pulse at each pixel. A set of parametric images may be calculated, mapping the values of various parameters calculated from the shape of the pulses. A safety analysis has been performed, based on current guidelines for skin exposure to radiation of wavelengths 2.6 µm–20 mm (15 GHz–115 THz), to determine the maximum permissible exposure (MPE) for such a terahertz imaging system. The international guidelines for this range of wavelengths are drawn from two U.S. standards documents. The method for this analysis was taken from the American National Standard for the Safe Use of Lasers (ANSI Z136.1), and to ensure a conservative analysis, parameters were drawn from both this standard and from the IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields (C95.1). The calculated maximum permissible average beam power was 3 mW, indicating that typical terahertz imaging systems are safe according to the current guidelines. Further developments may however result in systems that will exceed the calculated limit. Furthermore, the published MPEs for pulsed exposures are based on measurements at shorter wavelengths and with pulses of longer duration than those used in terahertz pulsed imaging systems, so the results should be treated with caution.

Reducing contamination by exposure plus safety behaviour

Background and objectives: It has been proposed that the judicious use of safety behaviour can facilitate improvements in the acceptability of cognitive behaviour therapy (CBT). It was decided to explore the possibility of facilitating CBT by introducing a form of safety behaviour.We sought to assess the degree to which Exposure plus Safety Behaviour (E þ SB) is an effective intervention for contamination fears. Methods: A comparison was made between the effects of a control condition (Exposure and Response Prevention; ERP) and an experimental condition (Exposure plus Safety Behaviour; E þ SB) in which each exposure to a contaminant was followed by the use of a hygienic wipe in a sample of (n ¼ 80) undergraduate students. In session one, each participant touched a confirmed contaminant 20 times. After each exposure participants were asked to report their feelings of contamination, fear, disgust, and danger. In the second session, two weeks later, the same procedure was carried out for a further 16 trials. Results: The ERP and the E þ SB conditions both produced large, significant and stable reductions in contamination. Significant reductions in fear, danger and disgust were also reported in both conditions. Limitations: The treatment was provided to an analogue sample and over two sessions. Conclusions: The use of hygienic wipes, the safety behaviour used in this experiment, did not preclude significant reductions in contamination, disgust, fear and danger. If it is replicated and extended over a longer time-frame, this finding may enable practitioners to enhance the acceptability of cognitive behavioural treatments and boost their effectiveness.

Construction safety and digital design: a review

As digital technologies become widely used in designing buildings and infrastructure, questions arise about their impacts on construction safety. This review explores relationships between construction safety and digital design practices with the aim of fostering and directing further research. It surveys state-of-the-art research on databases, virtual reality, geographic information systems, 4D CAD, building information modeling and sensing technologies, finding various digital tools for addressing safety issues in the construction phase, but few tools to support design for construction safety. It also considers a literature on safety critical, digital and design practices that raises a general concern about ‘mindlessness’ in the use of technologies, and has implications for the emerging research agenda around construction safety and digital design. Bringing these strands of literature together suggests new kinds of interventions, such as the development of tools and processes for using digital models to promote mindfulness through multi-party collaboration on safety