Agronomic techniques to control Lobesia botrana

The grapevine moth Lobesia botrana (Denis & Schiffermuller) (Lepidoptera: Tortricidae) is a key pest of grapevines in Greece. As part of a broader study on integrated pest management, the effects were investigated of different cultural methods on the establishment and survival of L. botrana, specifically: application of different nitrogen levels (30 and 100 units of ammonium sulfate or 70 units of Agrobiosol); summer leaf and shoot pruning; application of growth regulators (Regalis, probexadione-calcium; or Falgro, gibberellic acid). There were significant differences among the three levels of N application. The lowest L. botrana infestation rates were found in plots treated with 30 units of (NH4)(2)SO4 and plots that received some summer pruning. Following the application of plant growth regulators, the lowest L. botrana infestation levels occurred in the plots treated with Regalis or Falgro at the manufacturers' recommended concentrations. On vines where growth regulators had been applied, the clusters had fewer berries than those not treated with growth regulators.

The use of ultraviolet-blocking films in insect pest management in the UK; effects on naturally occurring arthropod pest and natural enemy populations in a protected cucumber crop

Studies in polytunnels were conducted to investigate the effects of ultraviolet (UV)-blocking films on naturally occurring insect pests and their arthropod natural enemies on a cucumber crop. Within tunnels clad with Antibotrytis (blocks light < 400 nm) and UVI/EVA (UV transmitting), 5.8 and 23.4 times more aphids, respectively, were recorded on traps compared with those on traps within tunnels clad with XL 385 (blocks light < 385 nm). When all plants within the UVI/EVA tunnels had become heavily infested with aphids, half of the plants in XL 385 tunnels were uninfested. More Coleoptera and thrips (approximately two times) were recorded under the UVI/EVA film than under the UV-blocking films, but for other arthropod pests (e. g. whitefly, leafhoppers), clear conclusions could not be drawn as low numbers were recorded. Substantial numbers of chalcid parasitoids and syrphids were found under the UV-blocking films, but further research is needed to evaluate fully the effect of such films on biological control of aphids. Higher syrphid numbers and more aphid mummies were recorded under the UVI/EVA film, probably because of the higher numbers of aphids present in tunnels clad with this film. The potential that UV-blocking films have as an effective component of commercial Integrated Pest Management (IPM) systems, for protected horticultural crops, is discussed.

Climate and biological control in organic crops

Organic farming has increased in popularity in recent years, primarily as a response to the perceived health and conservation benefits. While it is likely that conventional farming will be able to respond rapidly to variations in pest numbers and distribution resulting from climatic change, it is not clear if the same is true for organic farming. Few studies have looked at the responses of biological control organisms to climate change. Here, I review the direct and indirect eects of changes in temperature, atmospheric carbon dioxide and other climatic factors on the predators, parasitoids and pathogens of pest insects in temperate agriculture. Finally, I consider what research is needed to manage the anticipated change in pest insect dynamics and distributions.

GM crops: a potential for pest mismanagement

In the absence of equivalent research on genetically modified (GM) pest-resistant crops, their impact in pest management can be predicted from experience with traditionally bred varieties which share with GM crops the characteristic that the resistance is based on high expression of a single toxin. Such varieties lead to the rapid selection of tolerant pest strains, damage biological control and induce tolerance to synthetic pesticides. By contrast, polygenic and more broadly based resistant varieties will maintain their resistance for longer, and often synergise beneficially with biological control. The pests also become more susceptible to insecticides, giving the opportunity for applications which are selective in favour of natural enemies. However, although GM crops compare badly with traditional pest-resistant varieties, they compare favourably with insecticides, the technology they are most likely to replace.

Using an additive to control the electrospinning of fibres of poly(epsilon-caprolactone)

Electrospinning is a route to polymer fibres with diameters considerably smaller than available from most fibre-producing techniques. We explore the use of a low molecular weight compound as an effective control additive during the electrospinning of poly(epsilon-caprolactone). This approach extends the control variables for the electrospinning of nanoscale fibres from the more usual ones such as the polymer molecular weight, solvent and concentration. We show that through the use of dual solvent systems, we can alter the impact of the additive on the electrospinning process so that finer as well as thicker fibres can be prepared under otherwise identical conditions. As well as the size of the fibres and the number of beads, the use of the additive allows us to alter the level of crystallinity as well as the level of preferred orientation of the poly(epsilon-caprolactone) crystals. This approach, involving the use of a dual solvent and a low molar mass compound, offers considerable potential for application to other polymer systems. (C) 2010 Society of Chemical Industry

Prospects and challenges for sustainable management of the mango stone weevil, Sternochetus mangiferae (F.) (Coleoptera: Curculionidae) in West Africa: a review

Commercial mango production in Ghana is a relatively young industry faced with several pest problems including the mango stone weevil, Sternochetus mangiferae (F.). There is an urgent need to control this and other pests to facilitate access to the international export market for fresh mango fruits. A literature survey identifies stone weevil control tactics in the areas of host plant resistance, administrative and legislative controls, use of pesticides, biological control, cultural control and quarantine and phytosanitary measures that have been developed in other mango-producing areas. We assess these pest management approaches for their relevance to Ghana and West Africa, with emphasis on the research required for their appropriate, effective and sustainable use in the systems of mango production of the West African sub-region. The importance of processing and value addition technologies, as a means of circumventing the quarantine hurdles of S. mangiferae, is highlighted.

Control strategy for Boolean input systems

The purpose of this paper is to design a control law for continuous systems with Boolean inputs allowing the output to track a desired trajectory. Such systems are controlled by items of commutation. This type of systems, with Boolean inputs, has found increasing use in the electric industry. Power supplies include such systems and a power converter represents one of theses systems. For instance, in power electronics the control variable is the switching OFF and ON of components such as thyristors or transistors. In this paper, a method is proposed for the designing of a control law in state space for such systems. This approach is implemented in simulation for the control of an electronic circuit.

Advanced methods in adaptive control for industrial applications

This volume is based on a seminar concerned with advanced methods in adaptive control for industrial applications which was held in Prague in May 1990 and which brought together experts in the UK and Czechoslovakia in order to suggest solutions to specific current and anticipated problems faced by industry.

Local management and landscape drivers of pollination and biological control services in a Kenyan agro-ecosystem

Arthropods that have a direct impact on crop production (i.e. pests, natural enemies and pollinators) can be influenced by both local farm management and the context within which the fields occur in the wider landscape. However, the contributions and spatial scales at which these drivers operate and interact are not fully understood, particularly in the developing world. The impact of both local management and landscape context on insect pollinators and natural enemy communities and on their capacity to deliver related ecosystem services to an economically important tropical crop, pigeonpea was investigated. The study was conducted in nine paired farms across a gradient of increasing distance to semi-native vegetation in Kibwezi, Kenya. Results show that proximity of fields to semi-native habitats negatively affected pollinator and chewing insect abundance. Within fields, pesticide use was a key negative predictor of pollinator, pest and foliar active predator abundance. On the contrary, fertilizer application significantly enhanced pollinator and both chewing and sucking insect pest abundance. At a 1 km spatial scale of fields, there were significant negative effects of the number of semi-native habitat patches within fields dominated by mass flowering pigeonpea on pollinators abundance. For service provision, a significant decline in fruit set when insects were excluded from flowers was recorded. This study reveals the interconnections of pollinators, predators and pests with pigeonpea crop. For sustainable yields and to conserve high densities of both pollinators and predators of pests within pigeonpea landscapes, it is crucial to target the adoption of less disruptive farm management practices such as reducing pesticide and fertilizer inputs.

The determinants of competitive success in the interwar British radio industry

This article discusses the sources of competitive advantage in the interwar British radio industry. Specifically, it examines why sections of the industry that reaped substantial monopoly rents from the downstream value chain failed to dominate the industry. During the 1920s Marconi (which controlled the fundamental UK patents) had a key cost advantage, as had other members of the ‘Big Six’ electrical engineering firms which formed the BBC and were granted preferential royalties. Meanwhile the valve manufacturers' cartel was also able to extract high rents from set manufacturers. The vertical integration literature suggests that input monopolists have incentives to control downstream production. Yet—in contrast to the gramophone industry, which became concentrated into two huge companies following market saturation in the 1930s—radio retained a much more competitive structure. The Big Six failed to capitalize fully on their initial cost advantages owing to logistical weaknesses in supplying markets subject to rapid technical and design obsolescence. Subsequently, during the 1930s, marketing innovations are shown to have played a key role in allowing several independents to establish successful brands. This gave them sufficient scale to provide strong bargaining positions with input suppliers, negating most of their initial cost disadvantage.

Influencing energy efficient occupant behavior through improved building and control design

There is growing pressure on the construction industry to deliver energy efficient, sustainable buildings but there is evidence to suggest that, in practice, designs regularly fail to achieve the anticipated levels of in-use energy consumption. One of the key factors behind this discrepancy is the behavior of the building occupants. This paper explores how insights from experimental psychology could potentially be used to reduce the gap between the predicted and actual energy performance of buildings. It demonstrates why traditional methods to engage with the occupants are not always successful and proposes a model for a more holistic approach to this issue. The paper concludes that achieving energy efficiency in buildings is not solely a technological issue and that the construction industry needs to adopt a more user-centred approach.

Location, control and innovation in knowledge-intensive industries

The rising share of intangibles in economies worldwide highlights the crucial role of knowledge-intensive and creative industries in current and future wealth generation. The recognition of this trend has led to intense competition in these industries. At the micro-level, firms from both advanced and emerging economies are globally dispersing their value chains to control costs and leverage capabilities. The geography of innovation is the outcome of a dynamic process whereby firms from emerging economies strive to catch-up with advanced economy competitors, creating strong pressures for continued innovation. However, two distinct strategies can be discerned with regard to the control of the value chain. A vertical integration strategy emphasizes taking advantage of ‘linkage economies’ whereby controlling multiple value chain activities enhances the efficiency and effectiveness of each one of them. In contrast, a specialization strategy focuses on identifying and controlling the creative heart of the value chain, while outsourcing all other activities. The global mobile handset industry is used as the template to illustrate the theory.