Students’ perception of the safety and value of a herbal vs. a conventional medicine for treating insomnia

University students suffer from variable sleep patterns including insomnia;[1] furthermore, the highest incidence of herbal use appears to be among college graduates.[2] Our objective was to test the perception of safety and value of herbal against conventional medicine for the treatment of insomnia in a non-pharmacy student population. We used an experimental design and bespoke vignettes that relayed the same effectiveness information to test our hypothesis that students would give higher ratings of safety and value to herbal product compared to conventional medicine. We tested another hypothesis that the addition of side-effect information would lower people’s perception of the safety and value of the herbal product to a greater extent than it would with the conventional medicine.

Plants growing on contaminated and brownfield sites appropriate for use in Organisation for Economic Co-operation and Development terrestrial plant growth test

The Organisation for Economic Co-operation and Development (OECD) Terrestrial plant test is often used for the ecological risk assessment of contaminated land. However, its origins in plant protection product testing mean that the species recommended in the OECD guidelines are unlikely to occur on contaminated land. Six alternative species were tested on contaminated soils from a former Zn smelter and a metal fragmentizer with elevated concentrations of Cd, Cu, Pb, and Zn. The response of the alternative species was compared to two species recommended by the OECD; Lolium perenne (perennial ryegrass) and Trifolium pratense (red clover). Urtica dioica (stinging nettle) and Poa annua (annual meadow-grass) had low emergence rates in the control soil so may be considered unsuitable. Festuca rubra (chewings fescue), Holcus lanatus (Yorkshire fog), Senecio vulgaris (common groundsel), and Verbascum thapsus (great mullein) offer good alternatives to the OECD species. In particular, H. lanatus and S. vulgaris were more sensitive to the soils with moderate concentrations of Cd, Cu, Pb, and Zn than the OECD species.

Does gym use impact upon nutritional knowledge?

Purpose – The purpose of this paper is to investigate gym and non-gym users' use and understanding of nutrition labels. Design/methodology/approach – A consumer survey in the form of a questionnaire conducted in the Greater London area in February/March 2005. Subject recruitment process took place in both a gym and university setting. Frequency tables and ?2-test are used to assess relationships between variables (p=0.05). Findings – The resulting sample consisted of 187 subjects, with predominance of females and gym users. Of the subjects, 88 per cent reported to at least occasionally read nutrition labels, with higher reading rates amongst women, irrespective of gym user status. Total and saturated fats are the most often information viewed on labels, however the overall knowledge of the calorie content of fat is low, with 53 per cent of subjects responding saturated fat contains more calories per gram when compared with other types of fats. This paper does not find significant differences in the use and understanding of nutrition labels between gym and non-gym users, but highlights the publics' continued lack of understanding of nutrition labels. Originality/value – This paper is unique as it investigates whether there is any difference between gym/non-gym users' use and interpretation of use of nutrition labels. It finds gender impacted more on nutritional labels knowledge than gym user's status. This points to a gender issue and questions the quality of information available to the general public. This paper is valuable as it highlights and identifies an area that requires further research and assessment, and is therefore useful to key stakeholders responsible for public health nutrition.

Use of fibrolytic enzymes to improve the nutritive value of ruminant diets - A biochemical and in vitro rumen degradation assessment

Two commercial enzyme products, Depol 40 (D) and Liquicell 2500 (L), were characterised from a biochemical standpoint and their potential to improve rumen degradation of forages was evaluated in vitro. Enzyme activities were determined at pH 5.5 and 39 degreesC. Analysis of the enzyme activities indicated that L contained higher xylanase and endoglucanase, but lower exoglucanase, pectinase and alpha-amylase activities than D. The Reading Pressure Technique (RPT) was used to investigate the effect of enzyme addition on the in vitro gas production (GP) and organic matter degradation (OMD) of alfalfa (Medicago sativa L.) stems and leaves. A completely randomised design with factorial arrangement of treatments was used. Both alfalfa fractions were untreated or treated with each enzyme at four levels, 20 h before incubation with rumen fluid. Each level of enzyme provided similar amounts of filter paper (D1, L1), endoglucanase (D2, L2), alpha-L-arabinofuranosidase (D3, L3) and xylanase units (D4, L4) per gram forage DM. Enzymes increased the initial OMD in both fractions, with improvements of up to 15% in leaves (D4) and 8% in stems (L2) after 12 h incubation. All enzyme treatments increased the extent of degradation (96 h incubation) in the leaf fractions, but only L2 increased final OMD in the stems. Direct hydrolysis of forage fractions during the pre-treatment period did not fully account for the magnitude of the increases in OMD, suggesting that the increase in rate of degradation was achieved through a combined effect of direct enzyme hydrolysis and synergistic action between the exogenous (applied) and endogenous (rumen) enzymes. (C) 2003 Elsevier Science B.V. All rights reserved.

Integrating socio-economics and ecology: a taxonomy of quantitative methods and a review of their use in agro-ecology

Answering many of the critical questions in conservation, development and environmental management requires integrating the social and natural sciences. However, understanding the array of available quantitative methods and their associated terminology presents a major barrier to successful collaboration. We provide an overview of quantitative socio-economic methods that distils their complexity into a simple taxonomy. We outline how each has been used in conjunction with ecological models to address questions relating to the management of socio-ecological systems. We review the application of social and ecological quantitative concepts to agro-ecology and classify the approaches used to integrate the two disciplines. Our review included all published integrated models from 2003 to 2008 in 27 journals that publish agricultural modelling research. Although our focus is on agro-ecology, many of the results are broadly applicable to other fields involving an interaction between human activities and ecology. We found 36 papers that integrated social and ecological concepts in a quantitative model. Four different approaches to integration were used, depending on the scale at which human welfare was quantified. Most models viewed humans as pure profit maximizers, both when calculating welfare and predicting behaviour. Synthesis and applications. We reached two main conclusions based on our taxonomy and review. The first is that quantitative methods that extend predictions of behaviour and measurements of welfare beyond a simple market value basis are underutilized by integrated models. The second is that the accuracy of prediction for integrated models remains largely unquantified. Addressing both problems requires researchers to reach a common understanding of modelling goals and data requirements during the early stages of a project.

Effect of variety, nitrogen fertiliser and various agronomic factors on the nutritive value of husked and naked oats grain

The effect of variety, agronomic and environmental factors on the chemical composition and energy value for ruminants and non-ruminants of husked and naked oats grain was studied. Winter oats were grown as experimental plots in each of 2 years on three sites in England. At each site two conventional husked oat cultivars (Gerald and Image) and two naked cultivars (Kynon and Pendragon) were grown. At each site, crops were sown on two dates and all crops were grown with the application of either zero or optimum fertiliser nitrogen. Variety and factors contained within the site + year effect had the greatest influence on the chemical composition and nutritive value of oats, followed by nitrogen ferfiliser treatment. For example, compared with zero nitrogen, the optimum nitrogen fertiliser treatment resulted in a consistent and significant (P < 0.001) increase in crude protein for all varieties at all sites from an average of 95 to 118 g kg(-1) DM, increased the potassium concentration in all varieties from an average of 4.9 to 5.1 g kg(-1) DM (P < 0.01) and reduced total lipid by a small but significant (P < 0.001) amount. Optimum nitrogen increased (P < 0.001) the NDF concentration in the two husked varieties and in the naked variety Pendragon. Naked cultivars were lower in fibre, had considerably higher energy, total lipid, linoleic acid, protein, starch and essential amino acids than the husked cultivars. Thus nutritionists need to be selective in their choice of naked or husked oat depending on the intended dietary use. (C) 2004 Elsevier B.V. All rights reserved.

Spatial econometric issues for bio-economic and land-use modelling

We survey the literature on spatial bio-economic and land-use modelling and assess its thematic development. Unobserved site-specific heterogeneity is a feature of almost all the surveyed works, and this feature, it seems, has stimulated significant methodological innovation. In an attempt to improve the suitability with which the prototype incorporates heterogeneity, we consider modelling alternatives and extensions. We discuss solutions and conjecture others.

Spatial econometric issues for bio-economic and land-use modelling

We survey the literature on spatial bio-economic and land-use modelling and assess its thematic development. Unobserved site-specific heterogeneity is a feature of almost all the surveyed works, and this feature, it seems, has stimulated significant methodological innovation. In an attempt to improve the suitability with which the prototype incorporates heterogeneity, we consider modelling alternatives and extensions. We discuss solutions and conjecture others.

The effects of non-host plant essential oil volatiles on the behaviour of the pollen beetle Meligethes aeneus

The use of semiochemicals for manipulation of the pollen beetle Meligethes aeneus (Fabricius) (Coleoptera: Nitidulidae) is being investigated for potential incorporation into a push-pull control strategy for this pest, which damages oilseed rape, Brassica napus L. (Brassicaceae), throughout Europe. The response of M. aeneus to non-host plant volatiles was investigated in laboratory assays to establish whether they have any effect on host plant location behaviour. Two approaches were used. First a novel, moving-air bioassay using air funnels was developed to compare the response of M. aeneus to several non-host plant essential oils. The beetles avoided the host plant flowers in the presence of non-host volatiles, suggesting that M. aeneus uses olfactory cues in host location and/or acceptance. The results were expressed as 'repellency values' in order to compare the effects of the different oils tested. Lavender (Lavendula angustifolia Miller) (Lamiaceae) essential oil gave the highest repellency value. In addition, a four-arm olfactometer was used to investigate olfactory responses, as this technique eliminated the influence of host plant visual and contact cues. The attraction to host plant volatiles was reduced by the addition of non-host plant volatiles, but in addition to masking the host plant volatiles, the non-host volatiles were avoided when these were presented alone. This is encouraging for the potential use of non-host plants within a push-pull strategy to reduce the pest colonisation of crops. Further testing in more realistic semi-field and field trials is underway.

Post-dispersal seed predation of non-target weeds in arable crops

Field experiments were conducted to quantify the natural levels of post-dispersal seed predation of arable weed species in spring barley and to identify the main groups of seed predators. Four arable weed species were investigated that were of high biodiversity value, yet of low to moderate competitive ability with the crop. These were Chenopodium album, Sinapis arvensis, Stellaria media and Polygonum aviculare. Exclusion treatments were used to allow selective access to dishes of seeds by different predator groups. Seed predation was highest early in the season, followed by a gradual decline in predation over the summer for all species. All species were taken by invertebrates. The activity of two phytophagous carabid genera showed significant correlations with seed predation levels. However, in general carabid activity was not related to seed predation and this is discussed in terms of the mainly polyphagous nature of many Carabid species that utilized the seed resource early in the season, but then switched to carnivory as prey populations increased. The potential relevance of post-dispersal seed predation to the development of weed management systems that maximize biological control through conservation and optimize herbicide use, is discussed.

Evaluation of a predictive model for Mycosphaerella graminicola for economic and environmental benefits

A method was developed to evaluate crop disease predictive models for their economic and environmental benefits. Benefits were quantified as the value of a prediction measured by costs saved and fungicide dose saved. The value of prediction was defined as the net gain made by using predictions, measured as the difference between a scenario where predictions are available and used and a scenario without prediction. Comparable 'with' and 'without' scenarios were created with the use of risk levels. These risk levels were derived from a probability distribution fitted to observed disease severities. These distributions were used to calculate the probability that a certain disease induced economic loss was incurred. The method was exemplified by using it to evaluate a model developed for Mycosphaerella graminicola risk prediction. Based on the value of prediction, the tested model may have economic and environmental benefits to growers if used to guide treatment decisions on resistant cultivars. It is shown that the value of prediction measured by fungicide dose saved and costs saved is constant with the risk level. The model could also be used to evaluate similar crop disease predictive models.

Post-dispersal seed predation of non-target weeds in arable crops

Field experiments were conducted to quantify the natural levels of post-dispersal seed predation of arable weed species in spring barley and to identify the main groups of seed predators. Four arable weed species were investigated that were of high biodiversity value, yet of low to moderate competitive ability with the crop. These were Chenopodium album, Sinapis arvensis, Stellaria media and Polygonum aviculare. Exclusion treatments were used to allow selective access to dishes of seeds by different predator groups. Seed predation was highest early in the season, followed by a gradual decline in predation over the summer for all species. All species were taken by invertebrates. The activity of two phytophagous carabid genera showed significant correlations with seed predation levels. However, in general carabid activity was not related to seed predation and this is discussed in terms of the mainly polyphagous nature of many Carabid species that utilized the seed resource early in the season, but then switched to carnivory as prey populations increased. The potential relevance of post-dispersal seed predation to the development of weed management systems that maximize biological control through conservation and optimize herbicide use, is discussed.

Use of essential and molecular dynamics to study gamma B-crystallin unfolding after non-enzymic post-translational modifications

Essential and Molecular Dynamics (ED/MD) have been used to model the conformational changes of a protein implicated in a conformational disease-cataract, the largest cause of blindness in the world-after non-enzymic post-translational modification. Cyanate modification did not significantly alter flexibility, while the Schiff's base adduct produced a more flexible N-terminal domain, and intra-secondary structure regions, than either the cyanate adduct or the native structure. Glycation also increased linker flexibility and disrupted the charge network. A number of post-translational adducts showed structural disruption around Cys15 and increased linker flexibility; this may be important in subsequent protein aggregation. Our modelling results are in accord with experimental evidence, and show that ED/MD is a useful tool in modelling conformational changes in proteins implicated in disease processes. (C) 2003 Published by Elsevier Ltd.

Quantitative comparison between the use of 3D vs 2D visualization tools to present building design proposals to non-spatial skilled end users

Information technology in construction (ITC) has been gaining wide acceptance and is being implemented in the construction research domains as a tool to assist decision makers. Most of the research into visualization technologies (VT) has been on the wide range of 3D and simulation applications suitable for construction processes. Despite its development with interoperability and standardization of products, VT usage has remained very low when it comes to communicating and addressing the needs of building end-users (BEU). This paper argues that building end users are a source of experience and expertise that can be brought into the briefing stage for the evaluation of design proposals. It also suggests that the end user is a source of new ideas promoting innovation. In this research a positivistic methodology that includes the comparison of 3D models and the traditional 2D methods is proposed. It will help to identify "how much", if anything, a non-spatial specialist can gain in terms Of "understanding" of a particular design proposal presented, using both methods.