A case study of sample design for longitudinal research: young lives

This paper presents a case study to illustrate the range of decisions involved in designing a sampling strategy for a complex, longitudinal research study. It is based on experience from the Young Lives project and identifies the approaches used to sample children for longitudinal follow-up in four less developed countries (LDCs). The rationale for decisions made and the resulting benefits, and limitations, of the approaches adopted are discussed. Of particular importance is the choice of sampling approach to yield useful analysis; specific examples are presented of how this informed the design of the Young Lives sampling strategy.

Hydroponic isotope labelling of entire plants (HILEP) for quantitative plant proteomics; an oxidative stress case study

Hydroponic isotope labelling of entire plants (HILEP) is a cost-effective method enabling metabolic labelling of whole and mature plants with a stable isotope such as N-15. By utilising hydroponic media that contain N-15 inorganic salts as the sole nitrogen source, near to 100% N-15-labelling of proteins can be achieved. In this study, it is shown that HILEP, in combination with mass spectrometry, is suitable for relative protein quantitation of seven week-old Arabidopsis plants submitted to oxidative stress. Protein extracts from pooled N-14- and N-15-hydroponically grown plants were fractionated by SDS-PAGE, digested and analysed by liquid chromatography electrospray ionisation tandem mass spectrometry (LC-ESI-MS/MS). Proteins were identified and the spectra of N-14/N-15 peptide pairs were extracted using their m/z chromatographic retention time, isotopic distributions, and the m/z difference between the N-14 and N-15 peptides. Relative amounts were calculated as the ratio of the sum of the peak areas of the two distinct N-14 and N-15 peptide isotope envelopes. Using Mascot and the open source trans-proteomic pipeline (TPP), the data processing was automated for global proteome quantitation down to the isoform level by extracting isoform specific peptides. With this combination of metabolic labelling and mass spectrometry it was possible to show differential protein expression in the apoplast of plants submitted to oxidative stress. Moreover, it was possible to discriminate between differentially expressed isoforms belonging to the same protein family, such as isoforms of xylanases and pathogen-related glucanases (PR 2). (C) 2008 Elsevier Ltd. All rights reserved.

A case study of intelligent buildings: Manchester stadium

This paper provides a case study of the City of Manchester Stadium based on relevant literatures, based on a comprehensive description of multidisciplinary, cross-sectoral and future-oriented requirements and operations in the design of modern intelligent sports buildings. The successfulness of the City of Manchester Stadium gives constructive experience and knowledge for the building professions including architecture, building structure, building services, construction, and facilities management, etc. In addition, this paper is valuable for developing intelligent sports buildings in China.

Learning from risks: A tool for post-project risk assessment

Risk management (RM) comprises of risk identification, risk analysis, response planning, monitoring and action planning tasks that are carried out throughout the life cycle of a project in order to ensure that project objectives are met. Although the methodological aspects of RM are well-defined, the philosophical background is rather vague. In this paper, a learning-based approach is proposed. In order to implement this approach in practice, a tool has been developed to facilitate construction of a lessons learned database that contains risk-related information and risk assessment throughout the life cycle of a project. The tool is tested on a real construction project. The case study findings demonstrate that it can be used for storing as well as updating risk-related information and finally, carrying out a post-project appraisal. The major weaknesses of the tool are identified as, subjectivity of the risk rating process and unwillingness of people to enter information about reasons of failure.

Knowledge sharing: Context, confusion and controversy

Project managers in the construction industry increasingly seek to learn from other industrial sectors. Knowledge sharing between different contexts is thus viewed as an essential source of competitive advantage. It is important therefore for project managers from all sectors to address and develop appropriate methods of knowledge sharing. However, too often it is assumed that knowledge freely exists and can be captured and shared between contexts. Such assumptions belie complexities and problems awaiting the unsuspecting knowledge-sharing protagonist. Knowledge per se is a problematic esoteric concept that does not lend itself easily to codification. Specifically tacit knowledge possessed by individuals, presents particular methodological issues for those considering harnessing its utility in return for competitive advantage. The notion that knowledge is also embedded in specific social contexts compounds this complexity. It is argued that knowledge is highly individualistic and concomitant with the various surrounding contexts within which it is shaped and enacted. Indeed, these contexts are also shaped as a consequence of knowledge adding further complexity to the problem domain. Current methods of knowledge capture, transfer and, sharing fall short of addressing these problematic issues. Research is presented that addresses these problems and proposes an alternative method of knowledge sharing. Drawing on data and observations collected from its application, the findings clearly demonstrate the crucial role of re-contextualisation, social interaction and dialectic debate in understanding knowledge sharing.

Responsiveness to change by standard-form contract drafters: A case study of the FIDIC White Book

Purpose – The purpose of this paper is to focus on the Fédération Internationale des Ingénieurs-Conseils (FIDIC) White Book standard form of building contract. It tracks the changes to this contract over its four editions, and seeks to identify their underlying causes. Design/methodology/approach – The changes made to the White Book are quantified using a specific type of quantitative content analysis. The amended clauses are then examined to understand the nature of the changes made. Findings – The length of the contract increased by 34 per cent between 1990 and 2006. A large proportion of the overall increase can be attributed to the clauses dealing with “conflict of interest/corruption” and “dispute resolution”. In both instances, the FIDIC drafting committees have responded to international developments to discourage corruption, and to encourage the use of alternative dispute resolution. Between 1998 and 2006, the average length of the sentences increased slightly, raising the question of whether long sentences are easily understood by users of contracts. Research limitations/implications – Quantification of text appears to be particularly useful for the analysis of documents which are regularly updated because changes can be clearly identified and the length of sentences can be determined, leading to conclusions about the readability of the text. However, caution is needed because changes of great relevance can be made to contract clauses without actually affecting their length. Practical implications – The paper will be instructive for contract drafters and informative for users of FIDIC's White Book. Originality/value – Quantifying text has been rarely used regarding standard-form contracts in the field of construction.

Communities of practice in construction case study organisations: questions and insights

Purpose – At the heart of knowledge management (KM) are the people – an organisation's important knowledge asset. Although this is widely acknowledged, businesses seldom understand this axiom in terms of the communities through which individuals develop and share the capacity to create and use knowledge. It is the collective learning that takes place within the social systems, i.e. communities of practice (CoP) that are of particular significance to an organisation from a KM perspective. This paper aims to review, critique, and raise some pertinent questions on the role of CoPs; and with the help of case studies shed light on the “goings-on” in construction practices. Design/methodology/approach – After critically reviewing the literature on CoPs and querying some underlying assertions, this research investigates how these issues are addressed in practice. A case study approach is adopted. Three organisations operating in the construction sector are interviewed for the purpose of this paper. Findings – Case study findings highlight the potential challenges and benefits of CoPs to a construction organisation, the role they play in generating and delivering value to the organisation and their contribution towards the collective organisational intelligence. From the findings, it is clear that the question is not whether communities exist within organisations, but how they deliver value to the organisation. From an organisational perspective, the key challenge is to provide an environment that is conducive to developing and nurturing such communities as opposed to merely creating them. Practical implications – Challenges and benefits demonstrated through the case studies should be taken in context. The findings are not intended to be prescriptive in nature, but are intentionally descriptive to provide contextual data that allow readers to draw their own inferences in the context of their organisations. They should be applied taking into account an organisation's unique characteristics and differentiators, the dynamics of the environment in which it operates and the culture it harbours within. Originality/value – Investigating the role of CoPs in the context of case study construction organisations forms the prime focus of this paper.

Selection of funding schemes by a borrowing decision model: a Hong Kong case study

In financial decision-making, a number of mathematical models have been developed for financial management in construction. However, optimizing both qualitative and quantitative factors and the semi-structured nature of construction finance optimization problems are key challenges in solving construction finance decisions. The selection of funding schemes by a modified construction loan acquisition model is solved by an adaptive genetic algorithm (AGA) approach. The basic objectives of the model are to optimize the loan and to minimize the interest payments for all projects. Multiple projects being undertaken by a medium-size construction firm in Hong Kong were used as a real case study to demonstrate the application of the model to the borrowing decision problems. A compromise monthly borrowing schedule was finally achieved. The results indicate that Small and Medium Enterprise (SME) Loan Guarantee Scheme (SGS) was first identified as the source of external financing. Selection of sources of funding can then be made to avoid the possibility of financial problems in the firm by classifying qualitative factors into external, interactive and internal types and taking additional qualitative factors including sovereignty, credit ability and networking into consideration. Thus a more accurate, objective and reliable borrowing decision can be provided for the decision-maker to analyse the financial options.

Uncertainty and feasibility studies: an Italian case study

Uncertainty affects all aspects of the property market but one area where the impact of uncertainty is particularly significant is within feasibility analyses. Any development is impacted by differences between market conditions at the conception of the project and the market realities at the time of completion. The feasibility study needs to address the possible outcomes based on an understanding of the current market. This requires the appraiser to forecast the most likely outcome relating to the sale price of the completed development, the construction costs and the timing of both. It also requires the appraiser to understand the impact of finance on the project. All these issues are time sensitive and analysis needs to be undertaken to show the impact of time to the viability of the project. The future is uncertain and a full feasibility analysis should be able to model the upside and downside risk pertaining to a range of possible outcomes. Feasibility studies are extensively used in Italy to determine land value but they tend to be single point analysis based upon a single set of “likely” inputs. In this paper we look at the practical impact of uncertainty in variables using a simulation model (Crystal Ball ©) with an actual case study of an urban redevelopment plan for an Italian Municipality. This allows the appraiser to address the issues of uncertainty involved and thus provide the decision maker with a better understanding of the risk of development. This technique is then refined using a “two-dimensional technique” to distinguish between “uncertainty” and “variability” and thus create a more robust model.

Extending higher educational opportunities through e-learning: a case study from Sri Lanka

The Knowledge Economy favours high skilled and adaptable workers, typically those with a degree. Information and Communication Technologies (ICTs) have the potential to extend educational opportunities through e-Learning. In Sri Lanka efforts have been made to employ ICTs in this way. The case study of Orange Valley University (pseudonymous) is presented, exploring the impact of ICT-based distance education on access to higher education. This ethnographic research employed questionnaires, qualitative interviews and documentary analysis. Online learning was found to appeal to a specific segment of the population. Flexibility and prestige were found to be important influences on programme selection. The majority possessed resources and skills for e-Learning; access and quality issues were considered.

Case study on the whole life carbon cycle in buildings

Global temperatures are expected to rise by between 1.1 and 6.4oC this century, depending, to a large extent, on the amount of carbon we emit to the atmosphere from now onwards. This warming is expected to have very negative effects on many peoples and ecosystems and, therefore, minimising our carbon emissions is a priority. Buildings are estimated to be responsible for around 50% of carbon emissions in the UK. Potential reductions involve both operational emissions, produced during use, and embodied emissions, produced during manufacture of materials and components, and during construction, refurbishments and demolition. To date the major effort has focused on reducing the, apparently, larger operational element, which is more readily quantifiable and reduction measures are relatively straightforward to identify and implement. Various studies have compared the magnitude of embodied and operational emissions, but have shown considerable variation in the relative values. This illustrates the difficulties in quantifying embodied, as it requires a detailed knowledge of the processes involved in the different life cycle phases, and requires the use of consistent system boundaries. However, other studies have established the interaction between operational and embodied, which demonstrates the importance of considering both elements together in order to maximise potential reductions. This is borne out in statements from both the Intergovernmental Panel on Climate Change and The Low Carbon Construction Innovation and Growth Team of the UK Government. In terms of meeting the 2020 and 2050 timeframes for carbon reductions it appears to be equally, if not more, important to consider early embodied carbon reductions, rather than just future operational reductions. Future decarbonisation of energy supply and more efficient lighting and M&E equipment installed in future refits is likely to significantly reduce operational emissions, lending further weight to this argument. A method of discounting to evaluate the present value of future carbon emissions would allow more realistic comparisons to be made on the relative importance of the embodied and operational elements. This paper describes the results of case studies on carbon emissions over the whole lifecycle of three buildings in the UK, compares four available software packages for determining embodied carbon and suggests a method of carbon discounting to obtain present values for future emissions. These form the initial stages of a research project aimed at producing information on embodied carbon for different types of building, components and forms of construction, in a simplified form, which can be readily used by building designers in optimising building design in terms of minimising overall carbon emissions. Keywords: Embodied carbon; carbon emission; building; operational carbon.