Extraction of tidal channel networks from airborne scanning laser altimetry and aerial photography

The study of the morphodynamics of tidal channel networks is important because of their role in tidal propagation and the evolution of salt-marshes and tidal flats. Channel dimensions range from tens of metres wide and metres deep near the low water mark to only 20-30cm wide and 20cm deep for the smallest channels on the marshes. The conventional method of measuring the networks is cumbersome, involving manual digitising of aerial photographs. This paper describes a semi-automatic knowledge-based network extraction method that is being implemented to work using airborne scanning laser altimetry (and later aerial photography). The channels exhibit a width variation of several orders of magnitude, making an approach based on multi-scale line detection difficult. The processing therefore uses multi-scale edge detection to detect channel edges, then associates adjacent anti-parallel edges together to form channels using a distance-with-destination transform. Breaks in the networks are repaired by extending channel ends in the direction of their ends to join with nearby channels, using domain knowledge that flow paths should proceed downhill and that any network fragment should be joined to a nearby fragment so as to connect eventually to the open sea.

Uses of airborne scanning laser altimetry for river flood modelling and coastal geomorphology

Two ongoing projects at ESSC that involve the development of new techniques for extracting information from airborne LiDAR data and combining this information with environmental models will be discussed. The first project in conjunction with Bristol University is aiming to improve 2-D river flood flow models by using remote sensing to provide distributed data for model calibration and validation. Airborne LiDAR can provide such models with a dense and accurate floodplain topography together with vegetation heights for parameterisation of model friction. The vegetation height data can be used to specify a friction factor at each node of a model’s finite element mesh. A LiDAR range image segmenter has been developed which converts a LiDAR image into separate raster maps of surface topography and vegetation height for use in the model. Satellite and airborne SAR data have been used to measure flood extent remotely in order to validate the modelled flood extent. Methods have also been developed for improving the models by decomposing the model’s finite element mesh to reflect floodplain features such as hedges and trees having different frictional properties to their surroundings. Originally developed for rural floodplains, the segmenter is currently being extended to provide DEMs and friction parameter maps for urban floods, by fusing the LiDAR data with digital map data. The second project is concerned with the extraction of tidal channel networks from LiDAR. These networks are important features of the inter-tidal zone, and play a key role in tidal propagation and in the evolution of salt-marshes and tidal flats. The study of their morphology is currently an active area of research, and a number of theories related to networks have been developed which require validation using dense and extensive observations of network forms and cross-sections. The conventional method of measuring networks is cumbersome and subjective, involving manual digitisation of aerial photographs in conjunction with field measurement of channel depths and widths for selected parts of the network. A semi-automatic technique has been developed to extract networks from LiDAR data of the inter-tidal zone. A multi-level knowledge-based approach has been implemented, whereby low level algorithms first extract channel fragments based mainly on image properties then a high level processing stage improves the network using domain knowledge. The approach adopted at low level uses multi-scale edge detection to detect channel edges, then associates adjacent anti-parallel edges together to form channels. The higher level processing includes a channel repair mechanism.

Impact of Bt cotton on farmer livelihoods in South Africa

The economic benefits of Genetically Modified (GM) crops in developing countries have been well documented, but little research has been undertaken to date on the impacts of GM adoption on household livelihoods. The research reported here aimed to assess the livelihood impacts of the adoption of Bt cotton in South Africa., and involved 100 interviews of resource-poor farmers growing Bt cotton in Makhathini Flats, South Africa. Some 88% of respondents reported a higher income from Bt compared to non-Bt varieties previously grown by them, and this higher income was used primarily for greater education of their children (76%), more investment in growing cotton (46%), repaying debt (28%), investment in other crops (20%) and spending money on themselves. Some 89% had increased their asset base due to Bt cotton, primarily by increasing their cultivable land. These benefits of Bt adoption appeared widespread regardless of gender or farm size.

Environmental impact of genetically modified cotton in South Africa

This paper presents the results of a large-scale study designed to monitor the impact arising from the introduction of insect-resistant Bt cotton in the Makhathini Flats, Republic of South Africa. Bt cotton provides a degree of resistance to cotton bollworm complex (Lepidoptera). Data were collected on the use of insecticides (type and quantity) as well as the farm-level economics of production from over 2200 farmers in three growing seasons (1998/1999, 1999/2000 and 2000/2001). and the results are discussed within the context of environmental impact brought about by insecticide. Over the three seasons of the study it was clear that Bt cotton provided benefits in terms of higher yield and gross margin relative to farmers growing conventional (non-Bt) cotton, and the benefits were particularly apparent for the smallest producers. Bt growers also used significantly less insecticide than growers of non-Bt cotton. Once quantities of insecticide applied to Bt and non-Bt cotton were converted into a Biocide Index and an Environmental Impact Quotient (EIQ) in order to allow for differences in terms of toxicity and persistence in the environment, it was apparent that the growing of Bt had a less negative impact on the environment. While this points to beneficial impacts on agricultural sustainability there are wider concerns regarding the vulnerability of resource-poor farmers in an area with limited (as yet) marketing options for their product and options for livelihood diversification both within and outside agriculture. Cotton producers in Makhathini are vulnerable as they rely on just One company for inputs (including, credit) and for their market. While Bt cotton provides benefits it does not in itself address some of the structural limitations that farmers face. (c) 2006 Elsevier B.V. All rights reserved.

Output risk aspects of genetically modified crop technology in South Africa

Technology involving genetic modification of crops has the potential to make a contribution to rural poverty reduction in many developing countries. Thus far, insecticide-producing 'Bt' varieties of cotton have been the main GM crops under cultivation in developing nations. Several studies have evaluated the farm-level performance of Bt varieties in comparison to conventional ones by estimating production technology, and have mostly found Bt technology to be very successful in raising output and/or reducing insecticide input. However, the production risk properties of this technology have not been studied, although they are likely to be important to risk-averse smallholders. This study investigates the output risk aspects of Bt technology using a three-year farm-level dataset on smallholder cotton production in Makhathini flats, Kwa-Zulu Natal, South Africa. Stochastic dominance and stochastic production function estimation methods are used to examine the risk properties of the two technologies. Results indicate that Bt technology increases output risk by being most effective when crop growth conditions are good, but being less effective when conditions are less favourable. However, in spite of its risk increasing effect, the mean output performance of Bt cotton is good enough to make it preferable to conventional technology even for risk-averse smallholders.

Pesticide productivity and transgenic cotton technology: The South African smallholder case

This paper empirically investigates how the productivity of pesticide differs in Bt versus non-Bt technology for South African cotton smallholders, and what the implications for pesticide use levels are in the two technologies. This is accomplished by applying a damage control framework to farm-level data from Makhathini flats, KwaZulu-Natal. Contrary to findings elsewhere, notably China, that farmers over-use pesticides and that transgenic technology benefits farmers by enabling large reductions in pesticide use, the econometric evidence here indicates that non-Bt smallholders in South Africa under-use pesticide. Thus, the main potential contribution of the new technology is to enable them to realise lost productivity resulting from under-use. By providing a natural substitute for pesticide, the Bt technology enables the smallholders to circumvent credit and labour constraints associated with pesticide application. Thus, the same technology that greatly reduces pesticide applications but only mildly affects yields, when used by large-scale farmers in China and elsewhere, benefits South-African smallholder farmers primarily via a yield-enhancing effect.

Influence of occupant microhabitat on the composition of encrusting communities on gastropod shells

The exploitation of microhabitats is widely considered to increase biodiversity in marine ecosystems. Although intertidal hermit crabs and gastropods may inhabit the same shell type and shore level, their microhabitat may differ depending on the state of the tide. On the south coast of Wales the hermit crab Pagurus bernhardus mainly inhabits the shells of Nucella lapillus (84%). Hermit crab shells had a significantly different encrusting community compared with live N. lapillus shells. At low tide the live gastropods were found on exposed rock surfaces whereas hermit crabs were restricted to tidal pools. Communities encrusting live gastropod shells were characterised by lower species richness and abundance compared with shells inhabited by hermit crabs (12 species found in total). A greater abundance and richness of epibionts was recorded from both shell types during the summer compared with winter. Differences in community composition between shell occupant types were attributed to microhabitats used by gastropods and hermit crabs and the associated desiccation pressures, rather than competitive interactions or shell characteristics. This contradicts earlier studies of subtidal shells where biological processes were considered more important than physical factors in controlling species abundance and richness patterns. The use of rockpool microhabitats by hermit crabs increases the biodiversity of rocky shores, as some species commonly found on hermit-crab-inhabited shells were rare in other local habitats.

Computer modelling and estimation of recruitment patterns of non-branching coral colonies at three sites in Wakatobi Marine Park, S.E. Sulawesi, Indonesia; implications for coral reef conservation

We have studied growth and estimated recruitment of massive coral colonies at three sites, Kaledupa, Hoga and Sampela, separated by about 1.5 km in the Wakatobi Marine National Park, S.E. Sulawesi, Indonesia. There was significantly higher species richness (P<0.05), coral cover (P<0.05) and rugosity (P<0.01) at Kaledupa than at Sampela. A model for coral reef growth has been developed based on a rational polynomial function, where dx/dt is an index of coral growth with time; W is the variable (for example, coral weight, coral length or coral area), up to the power of n in the numerator and m in the denominator; a1……an and b1…bm are constants. The values for n and m represent the degree of the polynomial, and can relate to the morphology of the coral. The model was used to simulate typical coral growth curves, and tested using published data obtained by weighing coral colonies underwater in reefs on the south-west coast of Curaçao [‘Neth. J. Sea Res. 10 (1976) 285’]. The model proved an accurate fit to the data, and parameters were obtained for a number of coral species. Surface area data was obtained on over 1200 massive corals at three different sites in the Wakatobi Marine National Park, S.E. Sulawesi, Indonesia. The year of an individual's recruitment was calculated from knowledge of the growth rate modified by application of the rational polynomial model. The estimated pattern of recruitment was variable, with little numbers of massive corals settling and growing before 1950 at the heavily used site, Sampela, relative to the reef site with little or no human use, Kaledupa, and the intermediate site, Hoga. There was a significantly greater sedimentation rate at Sampela than at either Kaledupa (P<0.0001) or Hoga (P<0.0005). The relative mean abundance of fish families present at the reef crests at the three sites, determined using digital video photography, did not correlate with sedimentation rates, underwater visibility or lack of large non-branching coral colonies. Radial growth rates of three genera of non-branching corals were significantly lower at Sampela than at Kaledupa or at Hoga, and there was a high correlation (r=0.89) between radial growth rates and underwater visibility. Porites spp. was the most abundant coral over all the sites and at all depths followed by Favites (P<0.04) and Favia spp. (P<0.03). Colony ages of Porites corals were significantly lower at the 5 m reef flat on the Sampela reef than at the same depth on both other reefs (P<0.005). At Sampela, only 2.8% of corals on the 5 m reef crest are of a size to have survived from before 1950. The Scleractinian coral community of Sampela is severely impacted by depositing sediments which can lead to the suffocation of corals, whilst also decreasing light penetration resulting in decreased growth and calcification rates. The net loss of material from Sampela, if not checked, could result in the loss of this protective barrier which would be to the detriment of the sublittoral sand flats and hence the Sampela village.

Can adapting the homes of older people and providing assistive technology pay its way?

Background: Adaptations and assistive technology (AT) have an important role in enabling older people to remain in their own homes. Objective: To measure the feasibility and cost of adaptations and AT, and the scope for these to substitute and supplement formal care. Design: Detailed design studies to benchmark the adaptability of 82 properties against the needs of seven notional users. Setting: Social rented housing sector. Main outcome measures: Measures of the adaptability of properties, costs of care, adaptations and AT, and relationships between these costs. Results: The adaptability of properties varies according to many design factors and the needs of occupiers. The most adaptable properties were ground floor flats and bungalows; the least were houses, maisonettes and flats in converted houses. Purpose-built sheltered properties were generally more adaptable than corresponding mainstream properties but the opposite was the case for bungalows. Adaptations and AT can substitute for and supplement formal care, and in most cases the initial investment in adaptations and AT is recouped through subsequently lower care costs within the average life expectancy of a user. Conclusion: Appropriately selected adaptations and AT can make a significant contribution to the provision of living environments which facilitate independence. They can both substitute for traditional formal care services and supplement these services in a cost-effective way.

Age relationships beteen low level rock platforms and the high coastal slopes in Jersey and the surrounding area.

Recent research along the coastal cliffs and embayments of Jersey has revealed new aspects of the geomorphology of the rocky shore platform and its relationship with the steep slopes that link it to the island plateau above. Specifically, a rockhead platform meets a 10-30 m high, near vertical cliff at approximately 8-10 m above Jersey Datum (J.D.= ±0 m Ordnance Datum; likewise Guernsey Datum: G.D.), slopes down-towards mid-tide levels becoming ever more deeply dissected. Generalised contours of this platform show it to be distinct from a lower tidal rockhead platform which is comparatively smooth over large areas as it undergoes continuing contemporary abrasion. This lower platform is generally separated from the higher one by low cliffs, less than a metre high at mid-tidal levels, but two to three metres at the base of the backing cliffs. Both of these platforms are shown to antedate the Last Cold Stage (Devensian) head at a number of localities and this relationship is taken to represent the general situation, not only in Jersey, but throughout the other Channel Islands and adjacent coasts of Armorica. Whether either, or both, of these two platforms are older than Marine Oxygen Isotope Substage (MOIS) 5e (Ipswichian) as well is not known. However the considerable age of the numerous and wide intertidal shore platforms of the Channel Islands and adjacent coasts of Amorica makes a greater age quite possible.

Space heating and hot water demand analysis of dwellings connected to district heating scheme in UK

To achieve CO2 emissions reductions the UK Building Regulations require developers of new residential buildings to calculate expected CO2 emissions arising from their energy consumption using a methodology such as Standard Assessment Procedure (SAP 2005) or, more recently SAP 2009. SAP encompasses all domestic heat consumption and a limited proportion of the electricity consumption. However, these calculations are rarely verified with real energy consumption and related CO2 emissions. This paper presents the results of an analysis based on weekly head demand data for more than 200 individual flats. The data is collected from recently built residential development connected to a district heating network. A methodology for separating out the domestic hot water use (DHW) and space heating demand (SH) has been developed and compares measured values to the demand calculated using SAP 2005 and 2009 methodologies. The analysis shows also the variance in DHW and SH consumption between both size of the flats and tenure (privately owned or housing association). Evaluation of the space heating consumption includes also an estimation of the heating degree day (HDD) base temperature for each block of flats and its comparison to the average base temperature calculated using the SAP 2005 methodology.

Prehistoric activity in Peterstone Great Wharf Palaeochannels: field survey 2005-6

This is an interim report on research carried out at the intertidal site of Peterstone Great Wharf, located on the Wentlooge Levels, c. 7 km east of Cardiff. The project is the first detailed survey and excavation of a site originally recorded in 1996-7 as part of a larger survey of the intertidal zone from Cardiff to the Second Severn Crossing. The 1997 survey produced important evidence for prehistoric human activity preserved within four palaeochannels. Significant erosion has taken place since then. A new survey of the foreshore has identified additional palaeochannels not seen in 1997 which form part of a more complex system of inter-cutting channels, many containing wood structures including short lines of timbers on the channel edge. Artefacts include a wooden axe handle, antler artefacts, an animal bone assemblage and some pottery of Beaker and Bronze Age date. The finds are thought to derive from a nearby, possibly eroded, settlement. The channels have trapped artefacts and preserved evidence of a range of activities, including what are interpreted as possible boat landings and fishing structures.

Housing densities and consumer choice

From 2001, the construction of flats and high-density developments increased in England and the building of houses declined. Does this indicate a change in taste or is it a result of government planning policies? In this paper, an analysis is made of the long-term effects of the policy of constraint which has existed for the past 50 years but the increase in density is identified as occurring primarily after new, revised, planning guidance was issued in England in 2000 which discouraged low-density development. To substantiate this, it is pointed out that the change which occurred in England did not occur in Scotland where guidance was not changed to encourage high-density residential development. The conclusion that the change is the result of planning policies and not of a change in taste is confirmed by surveys of the occupants of new high-rise developments in Leeds. The new flat-dwellers were predominantly young and childless and expressed the intention, in the near future, when they could, of moving out of the city centre and into houses. From recent changes in guidance by the new coalition government, it is expected that the construction of flats in England will fall back to earlier levels over the next few years.

Is Energy Efficiency Priced in the Housing Market? Some Evidence from the United Kingdom.

This paper investigates whether energy performance ratings, as measured by mandatory Energy Performance Certificates (EPCs), are reflected in the sale prices of residential properties. This is the first large-scale empirical study of this topic in the UK involving approximately 400,000 dwellings in the period from 1995 to 2011. Applying hedonic regression and an augmented repeat sales regression, we find a positive relationship between the energy efficiency rating of a dwelling and the transaction price per square metre. The price effects of superior energy performance tend to be higher for terraced dwellings and flats compared to detached and semi-detached dwellings. The evidence is less clear-cut for house price growth rates but remains supportive of an overall positive association. Overall, the results of this study appear to support the hypothesis that energy efficiency levels are reflected in UK house prices, at least in recent years.

Bronze Age perceptions of wetlands: recent archaeological work on the Humber estuary

This paper addresses the perception of different wetlands in and around the Humber estuary in the Bronze Age. Combining past and current research, it will be argued that the perception of intertidal wetlands was nearly diametrically opposed to the perception of riverine floodplains. This contrasting perception is reflected in the material culture of the Bronze Age, and may be explained through the particular manner in which landscapes changed following marine transgressions. This work was largely undertaken within the framework of the Humber Wetlands Survey, an integrated archaeological and palaeoenvironmental research programme funded by English Heritage since 1992