The use of non-hypothetical experimental markets for measuring the acceptance of genetically modified foods

The findings from a study measuring consumer acceptance of genetically modified (GM) foods are presented. The empirical data were collected in an experimental market, an approach used extensively in experimental economics for measuring the monetary value of goods. The approach has several advantages over standard approaches used in sensory and marketing research (e.g., surveys and focus groups) because of its non-hypothetical nature and the realism introduced by using real goods, real money, and market discipline. In each of three US locations, we elicited the monetary compensation consumers required to consume a GM food. Providing positive information about the benefits of GM food production, in some cases, reduced the level of monetary compensation demanded to consume the GM food. (C) 2004 Elsevier Ltd. All rights reserved.

Farm-level performance of genetically modified cotton - A frontier analysis of cotton production in Maharashtra

In this paper, the yield increases resulting from the cultivation of Bt cotton in Maharashtra, India, are analysed. The study relies on commercial farm, rather than trial, data and is among the first of its kind to be based on real farm and market conditions. Findings show that since its commercial release in 2002, Bt cotton has had a significant positive impact on yields and on the economic performance of cotton growers in Maharashtra. This difference remains even after controlling for different soil and insecticide inputs in the production of Bt cotton. There is also significant spatial and temporal variation in this 'benefit', and much depends upon where production is taking place and on the season.

Consumer welfare effects of introducing and labeling genetically modified food

Non-hypothetical valuations obtained from experimental auctions in three United States and two European locations were used to calculate welfare effects of introducing and labeling of genetically modified food. Under certain assumptions, we find that introduction of genetically modified food has been welfare enhancing, on average, for United States consumers but not so for Europeans and while mandatory labeling has been beneficial for European consumers, such a policy would be detrimental in the United States. (c) 2005 Elsevier B.V. All rights reserved.

Effect of Information about benefits of biotechnology on consumer acceptance of genetically modified food; evidence from experimental auctions in the United States, England, and France

This study investigates the effect of information about potential benefits of biotechnology on consumer acceptance of genetically modified (GM) foods. Consumer willingness to accept compensation to consume a GM food was elicited using an incentive compatible auction mechanism in three US states (California, Florida, and Texas) and in two European countries (England and France). Results indicate that information on environmental benefits, health benefits and benefits to the third world significantly decreased the amount of money consumers demanded to consume GM food; however, the effect of information varied by type of information and location. Consistent with prior research, we find that initial attitudes toward biotechnology have a significant effect on how individuals responded to new information.

Comparative advantage in demand: Experimental evidence of preferences for genetically modified food in the United States and European Union

The United States (US) exports more than US$6 billion in agricultural commodities to the European Union (EU) each year, but one issue carries the potential to diminish this trade: use of biotechnology in food production. The EU has adopted more stringent policies towards biotechnology than the US. Understanding differences in European and American policies towards genetically modified (GM) foods requires a greater understanding of consumers' attitudes and preferences. This paper reports results from the first large-scale, cross-Atlantic study to analyse consumer demand for genetically modified food in a non-hypothetical market environment. We strongly reject the frequent if convenient assumption in trade theory that consumer preferences are identical across countries: the median level of compensation demanded by English and French consumers to consume a GM food is found to be more than twice that in any of the US locations. Results have important implications for trade theory, which typically focusses on differences in specialization, comparative advantage and factor endowments across countries, and for on-going trade disputes at the World Trade Organization.

Environmental impact of genetically modified cotton in South Africa

This paper presents the results of a large-scale study designed to monitor the impact arising from the introduction of insect-resistant Bt cotton in the Makhathini Flats, Republic of South Africa. Bt cotton provides a degree of resistance to cotton bollworm complex (Lepidoptera). Data were collected on the use of insecticides (type and quantity) as well as the farm-level economics of production from over 2200 farmers in three growing seasons (1998/1999, 1999/2000 and 2000/2001). and the results are discussed within the context of environmental impact brought about by insecticide. Over the three seasons of the study it was clear that Bt cotton provided benefits in terms of higher yield and gross margin relative to farmers growing conventional (non-Bt) cotton, and the benefits were particularly apparent for the smallest producers. Bt growers also used significantly less insecticide than growers of non-Bt cotton. Once quantities of insecticide applied to Bt and non-Bt cotton were converted into a Biocide Index and an Environmental Impact Quotient (EIQ) in order to allow for differences in terms of toxicity and persistence in the environment, it was apparent that the growing of Bt had a less negative impact on the environment. While this points to beneficial impacts on agricultural sustainability there are wider concerns regarding the vulnerability of resource-poor farmers in an area with limited (as yet) marketing options for their product and options for livelihood diversification both within and outside agriculture. Cotton producers in Makhathini are vulnerable as they rely on just One company for inputs (including, credit) and for their market. While Bt cotton provides benefits it does not in itself address some of the structural limitations that farmers face. (c) 2006 Elsevier B.V. All rights reserved.

Isolating the 'farmer' effect as a component of the advantage of growing genetically modified varieties in developing countries: a Bt cotton case study from Jalgaon, India

The present paper explores the 'farmer' effect in economic advantages often claimed for Bt cotton varieties (those with the endotoxin gene from Bacillus thuringiensis conferring resistance to some insect pests) compared to non-Bt varieties. Critics claim that much of the yield advantage of Bt cotton could be due to the fact that farmers adopting the technology are in a better position to provide inputs and management and so much of any claimed Bt advantage is an artefact rather than reflecting a real advantage of the variety per se. The present paper provides an in-depth analysis of 63 non-adopting and 94 adopting households of Bt cotton in Jalgaon, Maharashtra State, India, spanning the seasons 2002 and 2003. Results suggest that Bt adopters are indeed different from non-adopters in a number of ways. Adopters appear to specialize more on cotton (at least in terms of the land area they devote to the crop), spend more money on irrigation and grow well-performing non-Bt varieties of cotton (Bunny). Taking gross margin as the basis for comparison, Bt plots had 2.5 times the gross margin of non-Bt plots in both seasons. If only adopters are considered then the gross margin advantage of Bt plots reduces to 1.6 times that of non-Bt plots. This is still a significant advantage and could well explain the popularity of Bt in Maharashtra. However, it is clear that great care needs to be taken with such comparative studies.

Genetically modified insect resistance in cotton: some farm level economic impacts in India

The paper explores the impact of insect-resistant Bacillus thuringiensis (Bt) cotton on costs and returns over the first two seasons of its commercial release in three sub-regions of Maharashtra State, India. It is the first such research conducted in India based on farmers' own practices rather than trial plots. Data were collected for a total of 7793 cotton plots in 2002 and 1577 plots in 2003. Results suggest that while the cost of cotton seed was much higher for farmers growing Bt cotton relative to those growing non-Bt cotton, the costs of bollworm spray were much lower. While Bt plots had greater costs (seed plus insecticide) than non-Bt plots, the yields and revenue from Bt plots were much higher than those of non-Bt plots (some 39% and 63% higher in 2002 and 2003, respectively). Overall, the gross margins of Bt plots were some 43% (2002) and 73% (2003) higher than those of non-Bt plots, although there was some variation between the three sub-regions of the state. The results suggest that Bt cotton has provided substantial benefits for farmers in India over the 2 years, but there are questions as to whether these benefits are sustainable. (c) 2004 Elsevier Ltd. All rights reserved.

Effect of corn silage from an herbicide-tolerant genetically modified variety on milk production and absence of transgenic DNA in milk

Data from 60 multiparous Holstein cows were used in a 12-wk continuous design feeding trial. Cows were allocated to 1 of 4 experimental treatments (T1 to T4). In T1 and T2, the total mixed ration (TMR) contained either corn silage from the genetically modified (GM) variety Chardon Liberty Link, which is tolerant to the herbicide glufosinate ammonium, or its near isogenic nonGM counterpart, whereas the TMR used in T3 and T4 contained corn silage from the commercially available nonGM varieties Fabius and Antares, respectively. The objectives of the study were to determine if the inserted gene produced a marked effect on chemical composition, nutritive value, feed intake, and milk production, and to determine if transgenic DNA and the protein expressed by the inserted gene could be detected in bovine milk. The nutritive value, fermentation characteristics, mineral content, and amino acid composition of all 4 silages were similar. There were no significant treatment effects on milk yield, milk composition, and yield of milk constituents, and the dry matter (DM) intake of the GM variety was not significantly different from the 2 commercial varieties. However, although the DM intake noted for the nonGM near-isogenic variety was similar to the commercial varieties, it was significantly lower when compared with the GM variety. Polymerase chain reaction analyses of milk samples collected at wk 1, 6, and 12 of the study showed that none of the 90 milk samples tested positive, above a detection limit of 2.5 ng of total genomic DNA/mL of milk, for either tDNA (event T25) or the single-copy endogenous Zea mays gene, alcohol dehydrogenase. Using ELISA assays, the protein expressed by the T25 gene was not detected in milk.

Output risk aspects of genetically modified crop technology in South Africa

Technology involving genetic modification of crops has the potential to make a contribution to rural poverty reduction in many developing countries. Thus far, insecticide-producing 'Bt' varieties of cotton have been the main GM crops under cultivation in developing nations. Several studies have evaluated the farm-level performance of Bt varieties in comparison to conventional ones by estimating production technology, and have mostly found Bt technology to be very successful in raising output and/or reducing insecticide input. However, the production risk properties of this technology have not been studied, although they are likely to be important to risk-averse smallholders. This study investigates the output risk aspects of Bt technology using a three-year farm-level dataset on smallholder cotton production in Makhathini flats, Kwa-Zulu Natal, South Africa. Stochastic dominance and stochastic production function estimation methods are used to examine the risk properties of the two technologies. Results indicate that Bt technology increases output risk by being most effective when crop growth conditions are good, but being less effective when conditions are less favourable. However, in spite of its risk increasing effect, the mean output performance of Bt cotton is good enough to make it preferable to conventional technology even for risk-averse smallholders.

The use of life-cycle assessment to evaluate the environmental impacts of growing genetically modified, nitrogen use-efficient canola

Agriculture, particularly intensive crop production, makes a significant contribution to environmental pollution. A variety of canola (Brassica napus) has been genetically modified to enhance nitrogen use efficiency, effectively reducing the amount of fertilizer required for crop production. A partial life-cycle assessment adapted to crop production was used to assess the potential environmental impacts of growing genetically modified, nitrogen use-efficient (GMNUE) canola in North Dakota and Minnesota compared with a conventionally bred control variety. The analysis took into account the entire production system used to produce 1 tonne of canola. This comprised raw material extraction, processing and transportation, as well as all agricultural field operations. All emissions associated with the production of 1 tonne of canola were listed, aggregated and weighted in order to calculate the level of environmental impact. The findings show that there are a range of potential environmental benefits associated with growing GMNUE canola. These include reduced impacts on global warming, freshwater ecotoxicity, eutrophication and acidification. Given the large areas of canola grown in North America and, in particular, Canada, as well as the wide acceptance of genetically modified varieties in this area, there is the potential for GMNUE canola to reduce pollution from agriculture, with the largest reductions predicted to be in greenhouse gases and diffuse water pollution.

Rapeseed cytoplasm gives advantage in wild relatives and complicates genetically modified crop biocontainment

Biocontainment methods for genetically modified crops closest to commercial reality (chloroplast transformation, male sterility) would be compromised (in absolute terms) by seed-mediated gene flow leading to chloroplast capture. Even in these circumstances, however, it can be argued that biocontainment still represses transgene movement, with the efficacy depending on the relative frequency of seed-and pollen-mediated gene flow. In this study, we screened for crop-specific chloroplast markers from rapeseed (Brassica napus) amongst sympatric and allopatric populations of wild B. oleracea in natural cliff-top populations and B. rapa in riverside and weedy populations. We found only modest crop chloroplast presence in wild B. oleracea and in weedy B. rapa, but a surprisingly high incidence in sympatric (but not in allopatric) riverside B. rapa populations. Chloroplast inheritance models indicate that elevated crop chloroplast acquisition is best explained if crop cytoplasm confers selective advantage in riverside B. rapa populations. Our results therefore imply that chloroplast transformation may slow transgene recruitment in two settings, but actually accelerate transgene spread in a third. This finding suggests that the appropriateness of chloroplast transformation for biocontainment policy depends on both context and geographical location.

Effect of corn silage from an herbicide-tolerant genetically modified variety on milk production and absence of transgenic DNA in milk

Data from 60 multiparous Holstein cows were used in a 12-wk continuous design feeding trial. Cows were allocated to 1 of 4 experimental treatments (T1 to T4). In T1 and T2, the total mixed ration (TMR) contained either corn silage from the genetically modified (GM) variety Chardon Liberty Link, which is tolerant to the herbicide glufosinate ammonium, or its near isogenic nonGM counterpart, whereas the TMR used in T3 and T4 contained corn silage from the commercially available nonGM varieties Fabius and Antares, respectively. The objectives of the study were to determine if the inserted gene produced a marked effect on chemical composition, nutritive value, feed intake, and milk production, and to determine if transgenic DNA and the protein expressed by the inserted gene could be detected in bovine milk. The nutritive value, fermentation characteristics, mineral content, and amino acid composition of all 4 silages were similar. There were no significant treatment effects on milk yield, milk composition, and yield of milk constituents, and the dry matter (DM) intake of the GM variety was not significantly different from the 2 commercial varieties. However, although the DM intake noted for the nonGM near-isogenic variety was similar to the commercial varieties, it was significantly lower when compared with the GM variety. Polymerase chain reaction analyses of milk samples collected at wk 1, 6, and 12 of the study showed that none of the 90 milk samples tested positive, above a detection limit of 2.5 ng of total genomic DNA/mL of milk, for either tDNA (event T25) or the single-copy endogenous Zea mays gene, alcohol dehydrogenase. Using ELISA assays, the protein expressed by the T25 gene was not detected in milk.

The role of satellite image-processing for national-scale estimates of gene flow from genetically modified crops: rapeseed in the UK as a model

1.There is concern over the possibility of unwanted environmental change following transgene movement from genetically modified (GM) rapeseed Brassica napus to its wild and weedy relatives. 2. The aim of this research was to develop a remote sensing-assisted methodology to help quantify gene flow from crops to their wild relatives over wide areas. Emphasis was placed on locating sites of sympatry, where the frequency of gene flow is likely to be highest, and on measuring the size of rapeseed fields to allow spatially explicit modelling of wind-mediated pollen-dispersal patterns. 3. Remote sensing was used as a tool to locate rapeseed fields, and a variety of image-processing techniques was adopted to facilitate the compilation of a spatially explicit profile of sympatry between the crop and Brassica rapa. 4. Classified satellite images containing rapeseed fields were first used to infer the spatial relationship between donor rapeseed fields and recipient riverside B. rapa populations. Such images also have utility for improving the efficiency of ground surveys by identifying probable sites of sympatry. The same data were then also used for the calculation of mean field size. 5. This paper forms a companion paper to Wilkinson et al. (2003), in which these elements were combined to produce a spatially explicit profile of hybrid formation over the UK. The current paper demonstrates the value of remote sensing and image processing for large-scale studies of gene flow, and describes a generic method that could be applied to a variety of crops in many countries. 6.Synthesis and applications. The decision to approve or prevent the release of a GM cultivar is made at a national rather than regional level. It is highly desirable that data relating to the decision-making process are collected at the same scale, rather than relying on extrapolation from smaller experiments designed at the plot, field or even regional scale. It would be extremely difficult and labour intensive to attempt to carry out such large-scale investigations without the use of remote-sensing technology. This study used rapeseed in the UK as a model to demonstrate the value of remote sensing in assembling empirical information at a national level.