Far infrared filters for the GALILEO-Jupiter and other missions

Extrapolation of PbTe/II-VI multilayer interference-filter technique from 20 to beyond 40µm is described and PbTe transparency reviewed; improvements below 20µm are reported. A composite filter cutting on steeply at 40µm is described that uses absorptive films of ZnS and As2S3, thin Quartz, and supplementary multilayer interference. Absorptive filters are described containing the II-VI compounds since these are found transparent at wavelengths shorter and longer than their reststrahl.

Filter for Car Tracking Based on Acceleration and Steering Angle

The motion of a car is described using a stochastic model in which the driving processes are the steering angle and the tangential acceleration. The model incorporates exactly the kinematic constraint that the wheels do not slip sideways. Two filters based on this model have been implemented, namely the standard EKF, and a new filter (the CUF) in which the expectation and the covariance of the system state are propagated accurately. Experiments show that i) the CUF is better than the EKF at predicting future positions of the car; and ii) the filter outputs can be used to control the measurement process, leading to improved ability to recover from errors in predictive tracking.

Achieving accurate FTIR measurements on high performance bandpass filters

The sources of ordinate error in FTIR spectrometers are reviewed with reference to measuring small out-of-band features in the spectra of bandpass filters. Procedures for identifying instrumental artefacts are described. It is shown that features well below 0.01%T can be measured reliably.

Wavelets and the generalization of the variogram

The experimental variogram computed in the usual way by the method of moments and the Haar wavelet transform are similar in that they filter data and yield informative summaries that may be interpreted. The variogram filters out constant values; wavelets can filter variation at several spatial scales and thereby provide a richer repertoire for analysis and demand no assumptions other than that of finite variance. This paper compares the two functions, identifying that part of the Haar wavelet transform that gives it its advantages. It goes on to show that the generalized variogram of order k=1, 2, and 3 filters linear, quadratic, and cubic polynomials from the data, respectively, which correspond with more complex wavelets in Daubechies's family. The additional filter coefficients of the latter can reveal features of the data that are not evident in its usual form. Three examples in which data recorded at regular intervals on transects are analyzed illustrate the extended form of the variogram. The apparent periodicity of gilgais in Australia seems to be accentuated as filter coefficients are added, but otherwise the analysis provides no new insight. Analysis of hyerpsectral data with a strong linear trend showed that the wavelet-based variograms filtered it out. Adding filter coefficients in the analysis of the topsoil across the Jurassic scarplands of England changed the upper bound of the variogram; it then resembled the within-class variogram computed by the method of moments. To elucidate these results, we simulated several series of data to represent a random process with values fluctuating about a mean, data with long-range linear trend, data with local trend, and data with stepped transitions. The results suggest that the wavelet variogram can filter out the effects of long-range trend, but not local trend, and of transitions from one class to another, as across boundaries.

High performance blocking filters for the region 1µm to 20µm

A set of filters based on the sequence of semiconductor edges is described which offers continuity of short-wave infrared blocking. The rejection throughout the stop region is greater than 103 for each filter and the transmission better than 70% through one octave with a square cutoff. The cutoff points are located at intervals of about two-thirds of an octave. Filters at 2.6 ,µm, 5.5 µm, and 12 µm which use a low-passing multilayer in combination with a semiconductor absorption edge are described in detail. The design of multilayers for optimum performance is discussed by analogy with the synthesis of electric circuit filters.

Chemical composition and in vitro fermentation of tannin-rich tree fruits

Dry and mature tree fruits are a potential source of protein for goats in the semi-arid areas of southern Africa, but their chemical composition and feeding value is largely unknown. This study presents the chemical composition and in vitro fermentation of indehiscent whole fruits and separated seed and hull fractions from Acacia nilotica, Acacia erubescens, Acacia sieberiana, Acacia erioloba, Piliostigma thonningii and Dichrostachys cinerea trees. Results indicate that the N contents of whole fruits ranged between 13.5 g/kg DM (A. nilotica) and 27.1 g/kg DM (A. erubescens). Seeds had a higher N content than hulls for all tree species. A. nilotica, D. cinerea and P thonningii fruits had high levels of extractable phenolics (758, 458 and 299 g/kg DM, respectively). Soluble phenolics (SPh) and ytterbium precipitable phenolics (YbPh) levels were negatively correlated to in vitro gas production but positively correlated to in vitro organic matter degradability (iOMD). Partition factors for whole fruits at 48 h ranged between 3.6 mg/ml for A. erioloba and 7.8 mg/ml for A. nilotica. Seeds of A. erioloba, A. erubescens and P thonningii were consistently fermented more efficiently throughout the incubation period compared to their whole fruits or hulls. Estimating in vitro degradability of phenolic-rich substrates through filtration procedures can give erroneous results due to the loss of soluble phenolics, which are not necessarily degradable. The feeding value of fruits from D. cinerea and A. nilotica tree species may be reduced due to the presence of high levels of phenolics. (C) 2007 Elsevier B.V. All rights reserved.

Isolation and characterisation of phytase from dormant Corylus avellana seeds

Phytase (myo-inositol-1,2,3,4,5,6-hexakisphosphate phosphohydrolase, EC 3.1.3.26), which catalyses the step-wise hydrolysis of phytic acid, was purified from cotyledons of dormant Corylus avellana L. seeds. The enzyme was separated from the major soluble acid phosphatase by successive (NH4)2SO4 precipitation, gel filtration and cation exchange chromatography resulting in a 300-fold purification and yield of 7.5%. The native enzyme positively interacted with Concanavalin A suggesting that it is putatively glycosylated. After size exclusion chromatography and SDS–PAGE it was found to be a monomeric protein with molecular mass 72±2.5 kDa. The hazel enzyme exhibited optimum activity for phytic acid hydrolysis at pH 5 and, like other phytases, had broad substrate specificity. It exhibited the lowest Km (162 μM) and highest specificity constant (Vmax/Km) for phytic acid, indicating that this is the preferred in vivo substrate. It required no metal ion as a co-factor, while inorganic phosphate and fluoride competitively inhibited enzymic activity (Ki=407 μM and Ki=205 μM, respectively).

Critical stages of the brewing process for changes in antioxidant activity and levels of phenolic compounds in ale

Samples were taken at each stage of brewing (malt, milling, mashing, wort separation, hop addition, boiling, whirlpool, dilution, fermentation, warm rest, chill-lagering, beer filtration, carbonation and bottling, pasteurization, and storage). The level of antioxidant activity of unfractionated, low-molecular-mass (LMM) and high-molecular-mass (HMM) fractions was measured by the 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfortic acid) radical cation (ABTS(.+)) and ferric-reducing antioxidant power (FRAP) procedures. Polyphenol levels were assessed by HPLC. The LMM fraction (<5 kDa) was responsible for similar to80% of the level of antioxidant activity of the unfractionated malt and beer samples. In the unfractionated samples, significant decreases (P < 0.001) in antioxidant activity levels were observed after milling and beer filtration, with the decrease after beer filtration being accompanied by a significant decrease (P > 0.001) in catechin and ferulic acid levels. Increases in antioxidant activity levels were observed after mashing, boiling, fermentation, chill-lagering, and pasteurization, in line with previous studies on lager. Additionally, increases in the level of antioxidant activity occurred after wort separation and carbonation and bottling and were accompanied by increases in levels of most monitored polyphenols. Data from the ABTS(.-) and FRAP assays indicated that the compounds contributing to the levels of antioxidant activity responded differently in the two procedures. Levels of ferulic, vanillic, and chlorogenic acids and catechin accounted for 45-61% of the variation in antioxidant activity levels.

Glutathione and related thiol compounds II: the importance of protein bound glutathione and related protein-bound compounds in gluten proteins

Protein-bound glutathione (PSSG) and protein-bound related thiol compounds, i.e. cysteine (PSSCys), glutamyl-cysteine (PSSGlu-Cys) and cysteinyl-glycine (PSSCys-Gly), were analysed in proteins of Osborne fractions, i.e. gliadin, glutenin and gliadin-, glutenin-subfractions separated by gel filtration chromatography, gel protein and the total gluten proteins separated from wheat varieties with varying breadmaking performances. The results showed that PSSG and some protein-bound related thiol compounds were found in monomeric gliadins, indicating that glutathione and some related thiol compounds are able to form disulphide bonds (SS) with sulphydryl group (SH) of those proteins and the formation of those disulphide bonds may prevent those monomeric proteins from binding to other proteins. It was also observed that a larger amount of PSSG in glutenin proteins was negatively correlated with the molecular weight (M-w) distribution of glutenin polymers, suggesting that PSSG and protein-bound related thiol compounds may play an important role in controlling polymerisation of glutenin. Furthermore, it was found that the level of PSSG in gel protein from flours with poor breadmaking performances was constantly higher and significantly different (p < 0.05) from that of flours with good breadmaking performance. The same trend was observed with gluten samples from breadmaking and biscuitmaking flours. (C) 2003 Elsevier Ltd. All rights reserved.

Fecal water as a non-invasive biomarker in nutritional intervention: comparison of preparation methods and refinement of different endpoints

The assessment of cellular effects by the aqueous phase of human feces (fecal water, FW) is a useful biomarker approach to study cancer risks and protective activities of food. In order to refine and develop the biomarker, different protocols of preparing FW were compared. Fecal waters were prepared by 3 methods: (A) direct centrifugation; (B) extraction of feces in PBS before centrifugation; and (C) centrifugation of lyophilized and reconstituted feces. Genotoxicity was determined in colon cells using the Comet assay. Selected samples were investigated for additional parameters related to carcinogenesis. Two of 7 FWs obtained by methods A and B were similarly genotoxic. Method B, however, yielded higher volumes of FW, allowing sterile filtration for long-term culture experiments. Four of 7 samples were non-genotoxic when prepared according to all 3 methods. FW from lyophilized feces and from fresh samples were equally genotoxic. FWs modulated cytotoxicity, paracellular permeability, and invasion, independent of their genotoxicity. All 3 methods of FW preparation can be used to assess genotoxicity. The higher volumes of FWobtained by preparation method B greatly enhance the perspectives of measuring different types of biological parameters and using these to disclose activities related to cancer development.

Bioactive peptides from food proteins: new opportunities and challenges

Food proteins such as milk and soy are a rich source of bioactive peptides. In the last decade, research into this area has intensified and new bioactive peptide sequences have been discovered with a range of apparent biological functions; for example, antihypertensive, antioxidant, and antimicrobial effects and opiate-like qualities have been reported. These peptides could therefore lead to the development of important functional food products and ingredients for the prevention and even treatment of chronic diseases such as cardiovascular disease and cancer. Peptides can be produced by fermentation with dairy starters for instance, and by enzymatic hydrolysis with pancreatic and microbial enzymes. Further purification is typically carried out by membrane filtration and/or chromatographic methods. The production of novel bioactive peptides and their incorporation into functional food products poses several technological challenges as well as regulatory and marketing issues. Proof of efficacy is of paramount importance; this should be verified by conducting appropriate tests in vivo in animals and in humans. In addition, tests for cytotoxicity and allergenicity must be conducted. Despite all of these hurdles, scientific evidence is increasingly demonstrating the health benefits of diet-based disease prevention, and therefore new developments in this area are likely to continue both at the research and the commercialisation level.

Recovery and purification of surfactin from fermentation broth by a two-step ultrafiltration process

Surfactin is a bacterial lipopeptide produced by Bacillus subtilis and it is a powerful surfactant, having also antiviral, antibacterial and antitumor properties. The recovery and purification of surfactin from complex fermentation broths is a major obstacle to its commercialization; therefore, two-step membrane filtration processes were evaluated using centrifugal and stirred cell devices while the mechanisms of separation were investigated by particle size and surface charge measurements. In a first step of ultrafiltration (UF-1), surfactin was retained effectively by membranes at above its critical micelle concentration (CMC); subsequently in UF-2, the retentate micelles were disrupted by addition of 50% (v/v) methanol solution to allow recovery of surfactin in the permeate. Main protein contaminants were effective]), retained by the membrane in UF-2. Ultrafiltration was carried out either using centrifugal devices with 30 and 10 kDa MWCO regenerated cellulose membranes, or a stirred cell device with 10 kDa MWCO polyethersulfone (PES) and regenerated cellulose (RC) membranes. Total rejection of surfactin was consistently observed in UF-1, while in UF-2 PES membranes had the lowest rejection coefficient of 0.08 +/- 0.04. It was found that disruption of surfactin micelles, aggregation of protein contaminants and electrostatic interactions in UF-2 can further improve the selectivity of the membrane based purification technique. (C) 2007 Elsevier B.V. All rights reserved.