Myostatin is a key mediator between energy metabolism and endurance capacity of skeletal muscle

Myostatin (Mstn) participates in the regulation of skeletal muscle size and has emerged as a regulator of muscle metabolism. Here, we hypothesized that lack of myostatin profoundly depresses oxidative phosphorylation-dependent muscle function. Toward this end, we explored Mstn/ mice as a model for the constitutive absence of myostatin and AAV-mediated overexpression of myostatin propeptide as a model of myostatin blockade in adult wild-type mice. We show that muscles from Mstn/ mice, although larger and stronger, fatigue extremely rapidly. Myostatin deficiency shifts muscle from aerobic toward anaerobic energy metabolism, as evidenced by decreased mitochondrial respiration, reduced expression of PPAR transcriptional regulators, increased enolase activity, and exercise-induced lactic acidosis. As a consequence, constitutively reduced myostatin signaling diminishes exercise capacity, while the hypermuscular state of Mstn/ mice increases oxygen consumption and the energy cost of running. We wondered whether these results are the mere consequence of the congenital fiber-type switch toward a glycolytic phenotype of constitutive Mstn/ mice. Hence, we overexpressed myostatin propeptide in adult mice, which did not affect fiber-type distribution, while nonetheless causing increased muscle fatigability, diminished exercise capacity, and decreased Pparb/d and Pgc1a expression. In conclusion, our results suggest that myostatin endows skeletal muscle with high oxidative capacity and low fatigability, thus regulating the delicate balance between muscle mass, muscle force, energy metabolism, and endurance capacity.

Reverse transfers of innovation and national development: evidence from Brazilian subsidiaries

The search for innovation has become an important motivation for the internationalization of companies in emerging countries. In that context, this study tests the impact that a nation’s development has on whether subsidiaries transfer innovation of products or that of processes. Survey data collected from 73 subsidiaries of Brazilian companies indicate that companies located in developed markets tend to transfer more product-oriented innovations than do those based in emerging countries. Furthermore, the size and age of a subsidiary has an impact on the transfer process. The larger and younger the subsidiary, the more likely a company is to favor the flow of product innovation into its headquarters. The level of national development was not identified as an influence on the flow of process innovation.

Technology trajectories, innovation, and the growth of biomimetics

Publication rate of patents can be a useful measure of innovation and productivity in science and technology. Patenting activity in new technological fields follows a sigmoid (S-shaped) path. Qualitative and quantitative models in management and economics literature explain why such patterns of productivity may occur. TRIZ analysis suggests that patents are generated in bursts during the evolution of a product and that they are at different levels of inventiveness. The tendency is for the inventiveness to reduce as the product is more mature. This makes it possible to guess at the lifetime stage of a product and gauge its maturity and profitability. An analysis of patenting activity and other measures of inventiveness in the emerging field of biomimetics was presented, and future trends in biologically-inspired innovation was discussed.

Evidence of systematic approaches to innovation in facilities management

Purpose – This paper seeks to examine the nature of “service innovation” in the facilities management (FM) context. It reviews recent thinking on “service innovation” as distinct from “product innovation”. Applying these contemporary perspectives it describes UK case studies of 11 innovations in different FM organisations. These include both in-house client-based innovations and third-party innovations. Design/methodology/approach – The study described in the paper encompasses 11 different innovations that constitute a mix of process, product and practice innovations. All of the innovations stem from UK-based organisations that were subject to in-depth interviews regarding the identification, screening, commitment of resources and implementation of the selected innovations. Findings – The research suggested that service innovation is highly active in the UK FM sector. However, the process of innovation rarely followed a common formalized path. Generally, the innovations were one-shot commitments at the early stage. None of the innovations studied failed to proceed to full adoption stage. This was either due to the reluctance of participating organisations to volunteer “tested but unsuccessful” innovations or the absence of any trial methods that might have exposed an innovations shortcomings. Research limitations/implications – The selection of innovations was restricted to the UK context. Moreover, the choice of innovations was partly determined by the innovating organisation. This selection process appeared to emphasise “one-shot” high profile technological innovations, typically associated with software. This may have been at the expense of less resource intensive, bottom-up innovations. Practical implications – This paper suggests that there is a role for “research and innovation” teams within larger FM organisations, whether they are client-based or third-party. Central to this philosophy is an approach that is open to the possibility of failure. The innovations studied were risk averse with a firm commitment to proceed at the early stage. Originality/value – This paper introduces new thinking on the subject of “service innovation” to the context of FM. It presents research and development as a planned solution to innovation. This approach will enable service organisations to fully test and exploit service innovations.

An integrated assessment of carbon dioxide capture and storage in the UK

Geological carbon dioxide storage (CCS) has the potential to make a significant contribution to the decarbonisation of the UK. Amid concerns over maintaining security, and hence diversity, of supply, CCS could allow the continued use of coal, oil and gas whilst avoiding the CO2 emissions currently associated with fossil fuel use. This project has explored some of the geological, environmental, technical, economic and social implications of this technology. The UK is well placed to exploit CCS with a large offshore storage capacity, both in disused oil and gas fields and saline aquifers. This capacity should be sufficient to store CO2 from the power sector (at current levels) for a least one century, using well understood and therefore likely to be lower-risk, depleted hydrocarbon fields and contained parts of aquifers. It is very difficult to produce reliable estimates of the (potentially much larger) storage capacity of the less well understood geological reservoirs such as non-confined parts of aquifers. With the majority of its large coal fired power stations due to be retired during the next 15 to 20 years, the UK is at a natural decision point with respect to the future of power generation from coal; the existence of both national reserves and the infrastructure for receiving imported coal makes clean coal technology a realistic option. The notion of CCS as a ‘bridging’ or ‘stop-gap’ technology (i.e. whilst we develop ‘genuinely’ sustainable renewable energy technologies) needs to be examined somewhat critically, especially given the scale of global coal reserves. If CCS plant is built, then it is likely that technological innovation will bring down the costs of CO2 capture, such that it could become increasingly attractive. As with any capitalintensive option, there is a danger of becoming ‘locked-in’ to a CCS system. The costs of CCS in our model for UK power stations in the East Midlands and Yorkshire to reservoirs in the North Sea are between £25 and £60 per tonne of CO2 captured, transported and stored. This is between about 2 and 4 times the current traded price of a tonne of CO2 in the EU Emissions Trading Scheme. In addition to the technical and economic requirements of the CCS technology, it should also be socially and environmentally acceptable. Our research has shown that, given an acceptance of the severity and urgency of addressing climate change, CCS is viewed favourably by members of the public, provided it is adopted within a portfolio of other measures. The most commonly voiced concern from the public is that of leakage and this remains perhaps the greatest uncertainty with CCS. It is not possible to make general statements concerning storage security; assessments must be site specific. The impacts of any potential leakage are also somewhat uncertain but should be balanced against the deleterious effects of increased acidification in the oceans due to uptake of elevated atmospheric CO2 that have already been observed. Provided adequate long term monitoring can be ensured, any leakage of CO2 from a storage site is likely to have minimal localised impacts as long as leaks are rapidly repaired. A regulatory framework for CCS will need to include risk assessment of potential environmental and health and safety impacts, accounting and monitoring and liability for the long term. In summary, although there remain uncertainties to be resolved through research and demonstration projects, our assessment demonstrates that CCS holds great potential for significant cuts in CO2 emissions as we develop long term alternatives to fossil fuel use. CCS can contribute to reducing emissions of CO2 into the atmosphere in the near term (i.e. peak-shaving the future atmospheric concentration of CO2), with the potential to continue to deliver significant CO2 reductions over the long term.

Horses for courses: Relating innovation diffusion concepts to the stage of the diffusion process

The research uses a sociological perspective to build an improved, context specific understanding of innovation diffusion within the UK construction industry. It is argued there is an iterative interplay between actors and the social system they occupy that directly influences the diffusion process as well as the methodology adopted. The research builds upon previous findings that argued a level of best fit for the three innovation diffusion concepts of cohesion, structural equivalence and thresholds. That level of best fit is analysed here using empirical data from the UK construction industry. This analysis allows an understanding of how the relative importance of these concepts' actually varies within the stages of the innovation diffusion process. The conclusion that the level of relevance fluctuates in relation to the stages of the diffusion process is a new development in the field.

A hypoplastic model of skeletal muscle development displaying reduced foetal myoblast cell numbers, increased oxidative myofibres and improved specific tension capacity

The major component of skeletal muscle is the myofibre. Genetic intervention inducing over-enlargement of myofibres beyond a certain threshold through acellular growth causes a reduction in the specific tension generating capacity of the muscle. However the physiological parameters of a genetic model that harbours reduced skeletal muscle mass have yet to be analysed. Genetic deletion of Meox2 in mice leads to reduced limb muscle size and causes some patterning defects. The loss of Meox2 is not embryonically lethal and a small percentage of animals survive to adulthood making it an excellent model with which to investigate how skeletal muscle responds to reductions in mass. In this study we have performed a detailed analysis of both late foetal and adult muscle development in the absence of Meox2. In the adult, we show that the loss of Meox2 results in smaller limb muscles that harbour reduced numbers of myofibres. However, these fibres are enlarged. These myofibres display a molecular and metabolic fibre type switch towards a more oxidative phenotype that is induced through abnormalities in foetal fibre formation. In spite of these changes, the muscle from Meox2 mutant mice is able to generate increased levels of specific tension compared to that of the wild type.

Antioxidant capacity and phenolic composition of different woods used in cooperage

This study has investigated the antioxidant capacity of different woods used in cooperage and the effect of the botanical species of wood on this capacity. Quercus robur and Castanea sativa were the species with the highest antioxidant capacity, due to their relatively high content of phenolic compounds. However, the phenolic content of Prunus avium samples was very low, also reflected in its antioxidant capacity. All measurements of antioxidant capacity were consistent with the content and composition of the phenolic compounds detected in the wood samples. The major contributors to the antioxidant capacity were identified as phenolic acids, including gallic, protocatechuic, p-coumaric and ellagic acid and all the ellagitannins, due to their characteristic structure.

Reaping the benefits: science and the sustainable intensification of global agriculture

Food security is one of this century’s key global challenges. By 2050 the world will require increased crop production in order to feed its predicted 9 billion people. This must be done in the face of changing consumption patterns, the impacts of climate change and the growing scarcity of water and land. Crop production methods will also have to sustain the environment, preserve natural resources and support livelihoods of farmers and rural populations around the world. There is a pressing need for the ‘sustainable intensifi cation’ of global agriculture in which yields are increased without adverse environmental impact and without the cultivation of more land. Addressing the need to secure a food supply for the whole world requires an urgent international effort with a clear sense of long-term challenges and possibilities. Biological science, especially publicly funded science, must play a vital role in the sustainable intensifi cation of food crop production. The UK has a responsibility and the capacity to take a leading role in providing a range of scientifi c solutions to mitigate potential food shortages. This will require signifi cant funding of cross-disciplinary science for food security. The constraints on food crop production are well understood, but differ widely across regions. The availability of water and good soils are major limiting factors. Signifi cant losses in crop yields occur due to pests, diseases and weed competition. The effects of climate change will further exacerbate the stresses on crop plants, potentially leading to dramatic yield reductions. Maintaining and enhancing the diversity of crop genetic resources is vital to facilitate crop breeding and thereby enhance the resilience of food crop production. Addressing these constraints requires technologies and approaches that are underpinned by good science. Some of these technologies build on existing knowledge, while others are completely radical approaches, drawing on genomics and high-throughput analysis. Novel research methods have the potential to contribute to food crop production through both genetic improvement of crops and new crop and soil management practices. Genetic improvements to crops can occur through breeding or genetic modifi cation to introduce a range of desirable traits. The application of genetic methods has the potential to refi ne existing crops and provide incremental improvements. These methods also have the potential to introduce radical and highly signifi cant improvements to crops by increasing photosynthetic effi ciency, reducing the need for nitrogen or other fertilisers and unlocking some of the unrealised potential of crop genomes. The science of crop management and agricultural practice also needs to be given particular emphasis as part of a food security grand challenge. These approaches can address key constraints in existing crop varieties and can be applied widely. Current approaches to maximising production within agricultural systems are unsustainable; new methodologies that utilise all elements of the agricultural system are needed, including better soil management and enhancement and exploitation of populations of benefi cial soil microbes. Agronomy, soil science and agroecology—the relevant sciences—have been neglected in recent years. Past debates about the use of new technologies for agriculture have tended to adopt an either/or approach, emphasising the merits of particular agricultural systems or technological approaches and the downsides of others. This has been seen most obviously with respect to genetically modifi ed (GM) crops, the use of pesticides and the arguments for and against organic modes of production. These debates have failed to acknowledge that there is no technological panacea for the global challenge of sustainable and secure global food production. There will always be trade-offs and local complexities. This report considers both new crop varieties and appropriate agroecological crop and soil management practices and adopts an inclusive approach. No techniques or technologies should be ruled out. Global agriculture demands a diversity of approaches, specific to crops, localities, cultures and other circumstances. Such diversity demands that the breadth of relevant scientific enquiry is equally diverse, and that science needs to be combined with social, economic and political perspectives. In addition to supporting high-quality science, the UK needs to maintain and build its capacity to innovate, in collaboration with international and national research centres. UK scientists and agronomists have in the past played a leading role in disciplines relevant to agriculture, but training in agricultural sciences and related topics has recently suffered from a lack of policy attention and support. Agricultural extension services, connecting farmers with new innovations, have been similarly neglected in the UK and elsewhere. There is a major need to review the support for and provision of extension services, particularly in developing countries. The governance of innovation for agriculture needs to maximise opportunities for increasing production, while at the same time protecting societies, economies and the environment from negative side effects. Regulatory systems need to improve their assessment of benefits. Horizon scanning will ensure proactive consideration of technological options by governments. Assessment of benefi ts, risks and uncertainties should be seen broadly, and should include the wider impacts of new technologies and practices on economies and societies. Public and stakeholder dialogue—with NGOs, scientists and farmers in particular—needs to be a part of all governance frameworks.

Innovation in construction: a sociology of technology approach

An alternative approach to understanding innovation is made using two intersecting ideas. The first is that successful innovation requires consideration of the social and organizational contexts in which it is located. The complex context of construction work is characterized by inter-organizational collaboration, a project-based approach and power distributed amongst collaborating organizations. The second is that innovations can be divided into two modes: ‘bounded’, where the implications of innovation are restricted within a single, coherent sphere of influence, and ‘unbounded’, where the effects of implementation spill over beyond this. Bounded innovations are adequately explained within the construction literature. However, less discussed are unbounded innovations, where many firms' collaboration is required for successful implementation, even though many innovations can be considered unbounded within construction's inter-organizational context. It is argued that unbounded innovations require an approach to understand and facilitate the interactions both within a range of actors and between the actors and technological artefacts. The insights from a sociology of technology approach can be applied to the multiplicity of negotiations and alignments that constitute the implementation of unbounded innovation. The utility of concepts from the sociology of technology, including ‘system building’ and ‘heterogeneous engineering’, is demonstrated by applying them to an empirical study of an unbounded innovation on a major construction project (the new terminal at Heathrow Airport, London, UK). This study suggests that ‘system building’ contains outcomes that are not only transformations of practices, processes and systems, but also the potential transformation of technologies themselves.

The impact of overseas training on curriculum innovation and change in English language education in Western China

This article assesses the impact of a UK-based professional development programme on curriculum innovation and change in English Language Education (ELE) in Western China. Based on interviews, focus group discussions and observation of a total of 48 English teachers who had participated in an overseas professional development programme influenced by modern approaches to education and ELE, and 9 of their colleagues who had not taken part, it assesses the uptake of new approaches on teachers’ return to China. Interviews with 10 senior managers provided supplementary data. Using Diffusion of Innovations Theory as the conceptual framework, we examine those aspects of the Chinese situation that are supportive of change and those that constrain innovation. We offer evidence of innovation in classroom practice on the part of returnees and ‘reinvention’ of the innovation to ensure a better fit with local needs. The key role of course participants as opinion leaders in the diffusion of new ideas is also explored. We conclude that the selective uptake of this innovation is under way and likely to be sustained against a background of continued curriculum reform in China.

An evolutionary innovation perspective on the selection of low and zero carbon technologies in new housing

The Code for Sustainable Homes (the Code) will require new homes in the United Kingdom to be ‘zero carbon’ from 2016. Drawing upon an evolutionary innovation perspective, this paper contributes to a gap in the literature by investigating which low and zero carbon technologies are actually being used by house builders, rather than the prevailing emphasis on the potentiality of these technologies. Using the results from a questionnaire three empirical contributions are made. First, house builders are selecting a narrow range of technologies. Second, these choices are made to minimise the disruption to their standard design and production templates (SDPTs). Finally, the coalescence around a small group of technologies is expected to intensify with solar-based technologies predicted to become more important. This paper challenges the dominant technical rationality in the literature that technical efficiency and cost benefits are the primary drivers for technology selection. These drivers play an important role but one which is mediated by the logic of maintaining the SDPTs of the house builders. This emphasises the need for construction diffusion of innovation theory to be problematized and developed within the context of business and market regimes constrained and reproduced by resilient technological trajectories.