The UK Department of National Heritage: a model for the development and integration of leisure policy in the new Europe?

Leisure is in the vanguard of a social and cultural revolution which is replacing the former East/West political bipolarity with a globalised economic system in which the new Europe has a central rôle. Within this revolution, leisure, including recreation, culture and tourism, is constructed as the epitome of successful capitalist development; the very legitimisation of the global transmogrification from a production to a consumption orientation. While acting as a direct encouragement to the political transformation in many eastern European states, it is uncertain how the issue of leisure policy is being handled, given its centrality to the new economic order. This paper therefore examines the experience of western Europe, considering in particular the degree to which the newly-created Department of National Heritage in the UK provides a potential model for leisure development and policy integration in the new Europe. Despite an official rhetoric of support and promotion of leisure activities, reflecting the growing economic significance of tourism and the positive relationship between leisure provision and regional economic development, the paper establishes that in the place of the traditional rôle of the state in promoting leisure interests, the introduction of the Department has signified a shift to the use of leisure to promote the Government's interests, particularly in regenerating citizen rights claims towards the market. While an institution such as the Department of National Heritage may have relevance to emerging states as a element in the maintenance of political hegemony, therefore, it is questionable how far it can be viewed as a promoter or protector of leisure as a signifier of a newly-won political, economic and cultural freedom throughout Europe.

New evidence from Southern Jordan: rethinking the role of architecture in changing societies at the beginning of the Neolithic process

The development of architecture and the settlement is central to discussions concerning the Neolithic transformation asthe very visible evidence for the changes in society that run parallel to the domestication of plants and animals. Architecture hasbeen used as an important aspect of models of how the transformation occurred, and as evidence for the sharp difference betweenhunter-gatherer and farming societies. We suggest that the emerging evidence for considerable architectural complexity from theearly Neolithic indicates that some of our interpretations depend too much on a very basic understanding of structures which arenormally seen as being primarily for residential purposes and containing households, which become the organising principle for thenew communities which are often seen as fully sedentary and described as villages. Recent work in southern Jordan suggests that inthis region at least there is little evidence for a standard house, and that structures are constructed for a range of diverse primary purposes other than simple domestic shelters.

Passive and active hybrid approach to buildings design in Saudi Arabia

The building sector is one of the highest consumers of energy in the world. This has led to high dependency on using fossil fuel to supply energy without due consideration to its environmental impact. Saudi Arabia has been through rapid development accompanied by population growth, which in turn has increased the demand for construction. However, this fast development has been met without considering sustainable building design. General design practices rely on using international design approaches and features without considering the local climate and aspects of traditional passive design. This is by constructing buildings with a large amount of glass fully exposed to solar radiation. The aim of this paper is to investigate the development of sustainability in passive design and vernacular architecture. Furthermore, it compares them with current building in Saudi Arabia in terms of making the most of the climate. Moreover, it will explore the most sustainable renewable energy that can be used to reduce the environmental impact on modern building in Saudi Arabia. This will be carried out using case studies demonstrating the performance of vernacular design in Saudi Arabia and thus its benefits in terms of environmental, economic and social sustainability. It argues that the adoption of a hybrid approach can improve the energy efficiency as well as reduce the carbon footprint of buildings. This is by combining passive design, learning from the vernacular architecture and implementing innovative sustainable technologies.

Contributions of roots and rootstocks to sustainable, intensified crop production

Sustainable intensification is seen as the main route for meeting the world’s increasing demands for food and fibre. As demands mount for greater efficiency in the use of resources to achieve this goal, so the focus on roots and rootstocks and their role in acquiring water and nutrients, and overcoming pests and pathogens, is increasing. The purpose of this review is to explore some of the ways in which understanding root systems and their interactions with soils could contribute to the development of more sustainable systems of intensive production. Physical interactions with soil particles limit root growth if soils are dense, but root–soil contact is essential for optimal growth and uptake of water and nutrients. X-ray microtomography demonstrated that maize roots elongated more rapidly with increasing root–soil contact, as long as mechanical impedance was not limiting root elongation, while lupin was less sensitive to changes in root–soil contact. In addition to selecting for root architecture and rhizosphere properties, the growth of many plants in cultivated systems is profoundly affected by selection of an appropriate rootstock. Several mechanisms for scion control by rootstocks have been suggested, but the causal signals are still uncertain and may differ between crop species. Linkage map locations for quantitative trait loci for disease resistance and other traits of interest in rootstock breeding are becoming available. Designing root systems and rootstocks for specific environments is becoming a feasible target.

Modelling of urban sensible heat flux at multiple spatial scales : a demonstration using airborne hyperspectral imagery of Shanghai and a temperature–emissivity separation approach

Urbanization related alterations to the surface energy balance impact urban warming (‘heat islands’), the growth of the boundary layer, and many other biophysical processes. Traditionally, in situ heat flux measures have been used to quantify such processes, but these typically represent only a small local-scale area within the heterogeneous urban environment. For this reason, remote sensing approaches are very attractive for elucidating more spatially representative information. Here we use hyperspectral imagery from a new airborne sensor, the Operative Modular Imaging Spectrometer (OMIS), along with a survey map and meteorological data, to derive the land cover information and surface parameters required to map spatial variations in turbulent sensible heat flux (QH). The results from two spatially-explicit flux retrieval methods which use contrasting approaches and, to a large degree, different input data are compared for a central urban area of Shanghai, China: (1) the Local-scale Urban Meteorological Parameterization Scheme (LUMPS) and (2) an Aerodynamic Resistance Method (ARM). Sensible heat fluxes are determined at the full 6 m spatial resolution of the OMIS sensor, and at lower resolutions via pixel aggregation and spatial averaging. At the 6 m spatial resolution, the sensible heat flux of rooftop dominated pixels exceeds that of roads, water and vegetated areas, with values peaking at ∼ 350 W m− 2, whilst the storage heat flux is greatest for road dominated pixels (peaking at around 420 W m− 2). We investigate the use of both OMIS-derived land surface temperatures made using a Temperature–Emissivity Separation (TES) approach, and land surface temperatures estimated from air temperature measures. Sensible heat flux differences from the two approaches over the entire 2 × 2 km study area are less than 30 W m− 2, suggesting that methods employing either strategy maybe practica1 when operated using low spatial resolution (e.g. 1 km) data. Due to the differing methodologies, direct comparisons between results obtained with the LUMPS and ARM methods are most sensibly made at reduced spatial scales. At 30 m spatial resolution, both approaches produce similar results, with the smallest difference being less than 15 W m− 2 in mean QH averaged over the entire study area. This is encouraging given the differing architecture and data requirements of the LUMPS and ARM methods. Furthermore, in terms of mean study QH, the results obtained by averaging the original 6 m spatial resolution LUMPS-derived QH values to 30 and 90 m spatial resolution are within ∼ 5 W m− 2 of those derived from averaging the original surface parameter maps prior to input into LUMPS, suggesting that that use of much lower spatial resolution spaceborne imagery data, for example from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) is likely to be a practical solution for heat flux determination in urban areas.

GridRM: a resource monitoring architecture for the grid

Monitoring resources is an important aspect of the overall efficient usage and control of any distributed system. In this paper, we describe a generic open-source resource monitoring architecture that has been specifically designed for the Grid. The paper consists of three main sections. In the first section, we outline our motivation and briefly detail similar work in the area. In the second section, we describe the general monitoring architecture and its components. In the final section of the paper, we summarise the experiences so far and outline our future work.

LTE and LTE-A interworking and interoperability with 3GPP and non-3GPP wireless networks

This paper provides a high-level overview of E-UTRAN interworking and interoperability with existing Third Generation Partnership Project (3GPP) and non-3GPP wireless networks. E-UTRAN access networks (LTE and LTE-A) are currently the latest technologies for 3GPP evolution specified in Release 8, 9 and beyond. These technologies promise higher throughputs and lower latency while also reducing the cost of delivering the services to fit with subscriber demands. 3GPP offers a direct transition path from the current 3GPP UTRAN/GERAN networks to LTE including seamless handover. E-UTRAN and other wireless networks interworking is an option that allows operators to maximize the life of their existing network components before a complete transition to truly 4G networks. Network convergence, backward compatibility and interpretability are regarded as the next major challenge in the evolution and the integration of mobile wireless communications. In this paper, interworking and interoperability between the E-UTRAN Evolved Packet Core (EPC) architecture and 3GPP, 3GPP2 and IEEE based networks are clearly explained. How the EPC is designed to deliver multimedia and facilitate interworking is also explained. Moreover, the seamless handover needed to perform this interworking efficiently is described briefly. This study showed that interoperability and interworking between existing networks and E-UTRAN are highly recommended as an interim solution before the transition to full 4G. Furthermore, wireless operators have to consider a clear interoperability and interworking plan for their existing networks before making a decision to migrate completely to LTE. Interworking provides not only communication between different wireless networks; in many scenarios it contributes to add technical enhancements to one or both environments.

Autonomy and the socialisation of architects

The socio-cultural production of architects' identities, and their professional personas, is a lively source of continuing debate. At one extreme, there is the claim to autonomy that highlights the distinctiveness of architecture and its cultural and disciplinary specificity. This view is challenged by those who emphasise architects' dependence, for acting and actions, on their embeddedness into collective, social, settings and relationships. In the paper, we consider what it may mean to be ‘autonomous of’ and ‘dependent on’ in relation to the actions of architects. There is limited specification in architectural writings about what autonomy and dependence are, and we suggest that there is a need not to discount such terms, but to reformulate them by recognising that the socially constructed self is an integral part of individual action. In this respect, we seek to amplify, and evaluate, the concept of relational autonomy that distances the notion of autonomy from individualistic, under-socialised, accounts of architects and their practices. Referring to three empirical examples of practice, we amplify this understanding by, first, outlining what a relational autonomous approach to architecture might entail, and, secondly, assessing how far it may enable a conception of the practices of architects in ways whereby, following Tony Fry's observations, they are conceived as much broader than ‘the specificity of any particular activity’ that expresses their existence.

'Outside Architecture': lecture at The British School at Rome

Renshaw and Donszelmann lecture on their projects for the collaborative group 'Outside Architecture' this was part of a series of papers on the subject of architecture and art curated by The British School at Rome

The kommuna impulse: collective mechanisms and commune-ists in the early Soviet State

This study examines the creation of the urban kommuna (commune) and the ideals that stimulated this social phenomenon – the kommuna impulse of the nascent Soviet state. Collective idealism affected Soviet housing, architecture and even urban planning, but little is known of social experiments in commune‐ism. As a result, these collective cells have been dismissed as utopian anomalies or the product of a housing shortage. Here it is argued that these discursive assessments are unsatisfactory and isolated from the historical narrative. While utopian ideals and domestic necessity were central to the formation of collective living, the kommuna was also involved in an active discourse with collectivism and socialist ideology. The kommuna cell was a dynamic entity that required considerable formative planning. The activists who forged these cells – the self‐identified ‘communards’ – turned their everyday domestic life into a socialist battleground, in which they struggled with the key debates of the early Soviet state. This article examines the communard as a social activist in order to better understand this phenomenon. It clarifies the coexistence of ideological and idealist trends among Soviet youth with practical contingencies for socialism. Furthermore, it reveals the process by which the kommuna impulse and these contingencies developed throughout the 1920s and early 1930s.