An algorithm for isentropic flow

An efficient algorithm is presented for the solution of the equations of isentropic gas dynamics with a general convex gas law. The scheme is based on solving linearized Riemann problems approximately, and in more than one dimension incorporates operator splitting. In particular, only two function evaluations in each computational cell are required. The scheme is applied to a standard test problem in gas dynamics for a polytropic gas

An efficient shock capturing algorithm for compressible flows in a duct of variable cross-section

A numerical scheme is presented for the solution of the Euler equations of compressible flow of a gas in a single spatial co-ordinate. This includes flow in a duct of variable cross-section as well as flow with slab, cylindrical or spherical symmetry and can prove useful when testing codes for the two-dimensional equations governing compressible flow of a gas. The resulting scheme requires an average of the flow variables across the interface between cells and for computational efficiency this average is chosen to be the arithmetic mean, which is in contrast to the usual ‘square root’ averages found in this type of scheme. The scheme is applied with success to five problems with either slab or cylindrical symmetry and a comparison is made in the cylindrical case with results from a two-dimensional problem with no sources.

Shock capturing scheme for steady, supersonic, isentropic flow

A finite difference scheme is presented for the solution of the two-dimensional equations of steady, supersonic, isentropic flow. The scheme incorporates numerical characteristic decomposition, is shock-capturing by design and incorporates space marching as a result of the assumption that the flow is wholly supersonic in at least one space dimension. Results are shown for problems involving oblique hydraulic jumps and reflection from a wall.

Flux difference splitting for open channel flows

A finite difference scheme based on flux difference splitting is presented for the solution of the one-dimensional shallow-water equations in open channels, together with an extension to two-dimensional flows. A linearized problem, analogous to that of Riemann for gas dynamics, is defined and a scheme, based on numerical characteristic decomposition, is presented for obtaining approximate solutions to the linearized problem. The method of upwind differencing is used for the resulting scalar problems, together with a flux limiter for obtaining a second-order scheme which avoids non-physical, spurious oscillations. The scheme is applied to a one-dimensional dam-break problem, and to a problem of flow in a river whose geometry induces a region of supercritical flow. The scheme is also applied to a two-dimensional dam-break problem. The numerical results are compared with the exact solution, or other numerical results, where available.

Gas-phase rate coefficients for the reactions of O(3P), S(3P), Se(3P), and Te(3P) with alkenes: application of perturbation frontier molecular orbital theory, correlations, and structure-activity relations (SARs)

The kinetics of the reactions of the atoms O(P-3), S(P-3), Se(P-3), and Te((3)p) with a series of alkenes are examined for correlations relating the logarithms of the rate coefficients to the energies of the highest occupied molecular orbitals (HOMOs) of the alkenes. These correlations may be employed to predict rate coefficients from the calculated HOMO energy of any other alkene of interest. The rate coefficients obtained from the correlations were used to formulate structure-activity relations (SARs) for reactions of O((3)p), S(P-3), Se (P-3), and Te((3)p) with alkenes. A comparison of the values predicted by both the correlations and the SARs with experimental data where they exist allowed us to assess the reliability of our method. We demonstrate the applicability of perturbation frontier molecular orbital theory to gas-phase reactions of these atoms with alkenes. The correlations are apparently not applicable to reactions of C(P-3), Si(P-3), N(S-4), and Al(P-2) atoms with alkenes, a conclusion that could be explained in terms of a different mechanism for reaction of these atoms.

Physiological and bifidogenic effects of prebiotic supplements in infant formulae

This randomized controlled trial involving 110 healthy neonates studied physiological and bifidogenic effects of galactooligosaccharides (GOS), oligofructose and long-chain inulin (FOS) in formula. Subjects were randomized to Orafti Synergy1 (50 oligofructose: 50 FOS) 0.4g/dl or 0.8g/dl, GOS:FOS (90:10) 0.8g/dl or a standard formula according to Good Clinical Practise (GCP) guidelines. A breast-fed group was included for comparison. Outcome parameters were weight, length, intake, stool characteristics, crying, regurgitation, vomiting, adverse events and fecal bacterial population counts. Statistical analyses used non-parametric tests. During the first month of life weight, length, intake and crying increased significantly in all groups. Regurgitation and vomiting scores were low and similar. Stool frequency decreased significantly and similarly in all formula groups but was lower than in the breast-fed. All prebiotic groups maintained soft stools, only slightly harder than those of breast-fed infants. The standard group had significantly harder stools at wks 2 and 4 compared to 1 (P<0.001 & P=0.0279). The total number of fecal bacteria increased in all prebiotic groups (9.82, 9.73 and 9.91 to 10.34, 10.38 and 10.37, respectively, log10 cells/g feces, P=0.2298) and resembled more the breast-fed pattern. Numbers of lactic acid bacteria, bacteroides and clostridia were comparable. In the SYN1 0.8 g/dl and GOS:FOS groups Bifidobacterium counts were significantly higher at D14 & 28 compared to D3 and comparable to the breast-fed group. Tolerance and growth were normal. In conclusion, stool consistency and bacterial composition of infants taking SYN1 0.8 g/dl or GOS:FOS supplemented formula was closer to the breast-fed pattern. There was no risk for dehydration.

A low delta-9-tetrahydrocannabinol cannabis extract induces hyperphagia in rats

Appetite stimulation via partial agonism of cannabinoid type 1 receptors by Δ9tetrahydrocannabinol (Δ9THC) is well documented and can be modulated by non-Δ9THC phytocannabinoids. Δ9THC concentrations sufficient to elicit hyperphagia induce changes to both appetitive (reduced latency to feed) and consummatory (increased meal one size and duration) behaviours. Here, we show that a cannabis extract containing too little Δ9THC to stimulate appetite can induce hyperphagia solely by increasing appetitive behaviours. Twelve, male Lister hooded rats were presatiated before treatment with a low-Δ9THC cannabis extract (0.5, 1.0, 2.0 and 4.0 mg/kg). Hourly intake and meal pattern data were recorded and analyzed using one-way analyses of variance followed by Bonferroni post-hoc tests. The cannabis extract significantly increased food intake during the first hour of testing (at 4.0 mg/kg) and significantly reduced the latency to feed versus vehicle treatments (at doses ≥1.0 mg/kg). Meal size and duration were unaffected. These results show only the increase in appetitive behaviours, which could be attributed to non-Δ9THC phytocannabinoids in the extract rather than Δ9THC. Although further study is required to determine the constituents responsible for these effects, these results support the presence of non-Δ9THC cannabis constituent(s) that exert a stimulatory effect on appetite and likely lack the detrimental psychoactive effects of Δ9THC.

NMR studies of the conformational effect of single and double 3'-S-phosphorothiolate substitutions within deoxythymidine trinucleotides

NMR spectroscopy has been used to investigate the conformational effects of single and two consecutive 3′-S-phosphorothiolate modifications within a deoxythymidine trinucleotide. The presence of a single 3′-phosphorothioate modification shifts the conformation of the sugar ring it is attached to, from a mainly south to north pucker; this effect is also transmitted to the 3′-neighbour deoxyribose. This transmission is thought to be caused by favourable stacking of the heterocyclic bases. Similar observations have been made previously by this group. When two adjacent modifications are present, the conformations of the attached deoxyribose rings are again shifted almost completely to the north, however, there is no transmission to the 3′ deoxyribose ring. Base proton chemical shift analysis and molecular modelling have been used to aid elucidation of the origin of this feature. The observation for the dimodified sequence is consistent with our previously reported results for a related system in which spaced modifications are more thermodynamically stable than consecutive ones.

Lack of association between lipaemia and central adiposity in subjects with an atherogenic lipoprotein phenotype (ALP)

OBJECTIVE: To investigate the associations between indices of adiposity and cardiovascular risk factors in individuals with an atherogenic lipoprotein phenotype (ALP). SUBJECTS: Fifty-five men, aged 34-69 y, body mass index (BMI) 22-35 kg/m2, with an ALP lipid profile (triglycerides (TG) 1.5-4.0 mmol/l, HDL<1.1 mmol/l; %LDL-3>40% total LDL). DESIGN: Each participant provided a fasting blood sample and underwent an 8 h postprandial assessment and had anthropometric measurements taken. OUTCOME MEASURES: BMI, waist circumference (W), waist-to-hip ratio (W/H), sum of skinfolds (SSK), fasting and postprandial concentrations of glucose, insulin and plasma lipids, post-heparin lipase activity, and apoE genotype. RESULTS: The expected positive associations between BMI, W and SSK and fasting and postprandial insulin were observed (r=0.42-0.65). Little association between glucose responses and any measures of adiposity was evident. Unexpectedly, there were no positive associations between measures of central adiposity (W and W/H) and fasting and postprandial TG responses, with a trend towards negative associations in this study group (TG AUC vs W, r=-0.23, P=0.097; TG IAUC vs W/H, r=-0.26, P=0.068). Subgroup analysis indicated that lack of a positive association between central adiposity and postprandial TG values was more evident in those with one E4 allele (r=-0.42, P=0.077) relative to non-E4 carriers (r=-0.16, P=0.430). The expected positive associations between insulin and TG responses were not observed (r=-0.03 to -0.36). CONCLUSION: In this ALP group the expected positive association between TG responses and a centralized distribution of body fat was not observed, particularly in individuals with an apoE4 genotype. Our findings are not in line with the view that there is a clear causal relationship between insulin resistance and the lipid abnormalities associated with ALP.

Auditory hallucinations and Posttraumatic Stress Disorder within schizophrenia and substance abuse

There is a high prevalence of traumatic events within individuals diagnosed with schizophrenia, and of auditory hallucinations within individuals diagnosed with posttraumatic stress disorder (PTSD). However, the relationship between the symptoms associated with these disorders remains poorly understood. We conducted a multidimensional assessment of auditory hallucinations within a sample diagnosed with schizophrenia and substance abuse, both with and without co-morbid PTSD. Results suggest a rate of co-morbid PTSD similar to those reported within other studies. Patients who suffered co-morbid PTSD reported more distressing auditory hallucinations. However, the hallucinations were not more frequent or of longer duration. The need for a multidimensional assessment is supported. Results are discussed within current theoretical accounts of traumatic psychosis.

Fully automated software solution for protein quantitation by global metabolic labeling with stable isotopes

Metabolic stable isotope labeling is increasingly employed for accurate protein (and metabolite) quantitation using mass spectrometry (MS). It provides sample-specific isotopologues that can be used to facilitate comparative analysis of two or more samples. Stable Isotope Labeling by Amino acids in Cell culture (SILAC) has been used for almost a decade in proteomic research and analytical software solutions have been established that provide an easy and integrated workflow for elucidating sample abundance ratios for most MS data formats. While SILAC is a discrete labeling method using specific amino acids, global metabolic stable isotope labeling using isotopes such as (15)N labels the entire element content of the sample, i.e. for (15)N the entire peptide backbone in addition to all nitrogen-containing side chains. Although global metabolic labeling can deliver advantages with regard to isotope incorporation and costs, the requirements for data analysis are more demanding because, for instance for polypeptides, the mass difference introduced by the label depends on the amino acid composition. Consequently, there has been less progress on the automation of the data processing and mining steps for this type of protein quantitation. Here, we present a new integrated software solution for the quantitative analysis of protein expression in differential samples and show the benefits of high-resolution MS data in quantitative proteomic analyses.

Automated tertiary structure prediction with accurate local model quality assessment using the IntFOLD-TS method

The IntFOLD-TS method was developed according to the guiding principle that the model quality assessment would be the most critical stage for our template based modelling pipeline. Thus, the IntFOLD-TS method firstly generates numerous alternative models, using in-house versions of several different sequence-structure alignment methods, which are then ranked in terms of global quality using our top performing quality assessment method – ModFOLDclust2. In addition to the predicted global quality scores, the predictions of local errors are also provided in the resulting coordinate files, using scores that represent the predicted deviation of each residue in the model from the equivalent residue in the native structure. The IntFOLD-TS method was found to generate high quality 3D models for many of the CASP9 targets, whilst also providing highly accurate predictions of their per-residue errors. This important information may help to make the 3D models that are produced by the IntFOLD-TS method more useful for guiding future experimental work