Lethality of essential oil constituents towards the human louse, Pediculus humanus, and its eggs

Essential oils have been widely used in traditional medicine for the eradication of lice, including head lice, but due to the variability of their constitution the effects may not be reproducible. In an attempt to assess the contribution of their component monoterpenoids, a range of common individual compounds were tested in in vitro toxicity model against both human lice (Pediculus humanus, an accepted model of head lice lethality) and their eggs, at different concentrations. No detailed study into the relative potencies of their constituent terpenoids has so far been published. Adult lice were observed for lack of response to stimuli over 3 h and the LT50 calculated, and the percentage of eggs failing to hatch was used to generate ovicidal activity data. A ranking was compiled for adult lice and partially for eggs, enabling structure-activity relationships to be assessed for lethality to both, and showed that, for activity in both life-cycle stages, different structural criteria were required. (+)-Terpinen-4-ol was the most effective compound against adult lice, followed by other mono-oxygenated monocyclic compounds, whereas nerolidol was particularly lethal to eggs, but ineffective against adult lice. (c) 2006 Elsevier B.V. All rights reserved.

ExtSym: a program to aid space-group determination from powder diffraction data

Once unit-cell dimensions have been determined from a powder diffraction data set and therefore the crystal system is known (e.g. orthorhombic), the method presented by Markvardsen, David, Johnson & Shankland [Acta Cryst. (2001), A57, 47-54] can be used to generate a table ranking the extinction symbols of the given crystal system according to probability. Markvardsen et al. tested a computer program (ExtSym) implementing the method against Pawley refinement outputs generated using the TF12LS program [David, Ibberson & Matthewman (1992). Report RAL-92-032. Rutherford Appleton Laboratory, Chilton, Didcot, Oxon, UK]. Here, it is shown that ExtSym can be used successfully with many well known powder diffraction analysis packages, namely DASH [David, Shankland, van de Streek, Pidcock, Motherwell & Cole (2006). J. Appl. Cryst. 39, 910-915], FullProf [Rodriguez-Carvajal (1993). Physica B, 192, 55-69], GSAS [Larson & Von Dreele (1994). Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA], PRODD [Wright (2004). Z. Kristallogr. 219, 1-11] and TOPAS [Coelho (2003). Bruker AXS GmbH, Karlsruhe, Germany]. In addition, a precise description of the optimal input for ExtSym is given to enable other software packages to interface with ExtSym and to allow the improvement/modification of existing interfacing scripts. ExtSym takes as input the powder data in the form of integrated intensities and error estimates for these intensities. The output returned by ExtSym is demonstrated to be strongly dependent on the accuracy of these error estimates and the reason for this is explained. ExtSym is tested against a wide range of data sets, confirming the algorithm to be very successful at ranking the published extinction symbol as the most likely. (C) 2008 International Union of Crystallography Printed in Singapore - all rights reserved.

Comparison of preferences for object properties in the rat using paired- and free-choice paradigms

A common method for testing preference for objects is to determine which of a pair of objects is approached first in a paired-choice paradigm. In comparison, many studies of preference for environmental enrichment (EE) devices have used paradigms in which total time spent with each of a pair of objects is used to determine preference. While each of these paradigms gives a specific measure of the preference for one object in comparison to another, neither method allows comparisons between multiple objects simultaneously. Since it is possible that several EE objects would be placed in a cage together to improve animal welfare, it is important to determine measures for rats' preferences in conditions that mimic this potential home cage environment. While it would be predicted that each type of measure would produce similar rankings of objects, this has never been tested empirically. In this study, we compared two paradigms: EE objects were either presented in pairs (paired-choice comparison) or four objects were presented simultaneously (simultaneous presentation comparison). We used frequency of first interaction and time spent with each object to rank the objects in the paired-choice experiment, and time spent with each object to rank the objects in the simultaneous presentation experiment. We also considered the behaviours elicited by the objects to determine if these might be contributing to object preference. We demonstrated that object ranking based on time spent with objects from the paired-choice experiment predicted object ranking in the simultaneous presentation experiment. Additionally, we confirmed that behaviours elicited were an important determinant of time spent with an object. This provides convergent evidence that both paired choice and simultaneous comparisons provide valid measures of preference for EE objects in rats. (C) 2007 Elsevier B.V. All rights reserved.

Huntington's disease patients have selective problems with insight

The objective of this study was to determine insight in patients with Huntington's disease (HD) by contrasting patients' ability to rate their own behavior with their ability to rate a person other than themselves. HD patients and carers completed the Dysexecutive Questionnaire (DEX), rating themselves and each other at two time points. The temporal stability of these ratings was initially examined using these two time points since there is no published test-retest reliability of the DEX with this Population to date. This was followed by a comparison of patients' self-ratings and carer's independent ratings of patients by performing correlations with patients' disease variables, and in exploratory factor analysis was conducted on both sets of ratings. The DEX showed good test-retest reliability, with patients consistently and persistently underestimating the degree of their dysexecutive behavior, but not that of their carers. Patients' self-ratings and caters' ratings of patients both showed that dysexecutive behavior in HD can be fractionated into three underlying components (Cognition, Self-regulation, Insight), and the relative ranking of these factors was similar for both data sets. HD patients consistently underestimated the extent of only their own dysexecutive behaviors relative to carers' ratings by 26%, but were similar in ascribing ranks to the components of dysexecutive behavior. (c) 2005 Movement Disorder Society.

A technique for evaluation of interactive evolutionary systems

Very large scale scheduling and planning tasks cannot be effectively addressed by fully automated schedule optimisation systems, since many key factors which govern 'fitness' in such cases are unformalisable. This raises the question of an interactive (or collaborative) approach, where fitness is assigned by the expert user. Though well-researched in the domains of interactively evolved art and music, this method is as yet rarely used in logistics. This paper concerns a difficulty shared by all interactive evolutionary systems (IESs), but especially those used for logistics or design problems. The difficulty is that objective evaluation of IESs is severely hampered by the need for expert humans in the loop. This makes it effectively impossible to, for example, determine with statistical confidence any ranking among a decent number of configurations for the parameters and strategy choices. We make headway into this difficulty with an Automated Tester (AT) for such systems. The AT replaces the human in experiments, and has parameters controlling its decision-making accuracy (modelling human error) and a built-in notion of a target solution which may typically be at odds with the solution which is optimal in terms of formalisable fitness. Using the AT, plausible evaluations of alternative designs for the IES can be done, allowing for (and examining the effects of) different levels of user error. We describe such an AT for evaluating an IES for very large scale planning.

Transport impacts on atmosphere and climate: metrics

The transport sector emits a wide variety of gases and aerosols, with distinctly different characteristics which influence climate directly and indirectly via chemical and physical processes. Tools that allow these emissions to be placed on some kind of common scale in terms of their impact on climate have a number of possible uses such as: in agreements and emission trading schemes; when considering potential trade-offs between changes in emissions resulting from technological or operational developments; and/or for comparing the impact of different environmental impacts of transport activities. Many of the non-CO2 emissions from the transport sector are short-lived substances, not currently covered by the Kyoto Protocol. There are formidable difficulties in developing metrics and these are particularly acute for such short-lived species. One difficulty concerns the choice of an appropriate structure for the metric (which may depend on, for example, the design of any climate policy it is intended to serve) and the associated value judgements on the appropriate time periods to consider; these choices affect the perception of the relative importance of short- and long-lived species. A second difficulty is the quantification of input parameters (due to underlying uncertainty in atmospheric processes). In addition, for some transport-related emissions, the values of metrics (unlike the gases included in the Kyoto Protocol) depend on where and when the emissions are introduced into the atmosphere – both the regional distribution and, for aircraft, the distribution as a function of altitude, are important. In this assessment of such metrics, we present Global Warming Potentials (GWPs) as these have traditionally been used in the implementation of climate policy. We also present Global Temperature Change Potentials (GTPs) as an alternative metric, as this, or a similar metric may be more appropriate for use in some circumstances. We use radiative forcings and lifetimes from the literature to derive GWPs and GTPs for the main transport-related emissions, and discuss the uncertainties in these estimates. We find large variations in metric (GWP and GTP) values for NOx, mainly due to the dependence on location of emissions but also because of inter-model differences and differences in experimental design. For aerosols we give only global-mean values due to an inconsistent picture amongst available studies regarding regional dependence. The uncertainty in the presented metric values reflects the current state of understanding; the ranking of the various components with respect to our confidence in the given metric values is also given. While the focus is mostly on metrics for comparing the climate impact of emissions, many of the issues are equally relevant for stratospheric ozone depletion metrics, which are also discussed.

Mechanisms of partial plant resistance to diamondback moth (Plutella xylostella) in brassicas

Artificial diet studies were used to differentiate among physical and chemical mechanisms affecting the suitability to diamondback moth (Plutella xylostella L.), of 16 food substrates obtained by growing four different brassicas in the glasshouse or field and measuring the pest's performance on either leaf discs or a diet incorporating leaf powders. Leaves of Chinese cabbage and the cabbage cultivar 'Minicole' were, respectively, the most and least suitable leaves for the insect, but this ranking was reversed on artificial diet. Leaves of glasshouse-grown plants were more suitable than those of plants grown in the fields. Differences in the suitability of leaves to diamondback moth appeared to be largely determined by leaf toughness and surface wax load. Concentrations of individual glucosinolates in the brassicas probably acted as phagostimulants, so increasing their intrinsic susceptibility to diamondback moth, but the effect of the physical factors appeared more important.

Built environment education and research in West Africa

Built environment programmes in West African universities; and research contributions from West Africa in six leading international journals and proceedings of the WABER conference are explored. At least 20 universities in the region offer degree programmes in Architecture (86% out of 23 universities); Building (57%); Civil Engineering (67%); Estate Management (52%); Quantity Surveying (52%); Surveying and Geoinformatics (55%); Urban and Regional Planning (67%). The lecturer-student ratio on programmes is around 1:25 compared to the 1:10 benchmark for excellence. Academics who teach on the programmes are clearly research active with some having published papers in leading international journals. There is, however, plenty of scope for improvement particularly at the highest international level. Out of more than 5000 papers published in six leading international peer-reviewed journals since each of them was established, only 23 of the papers have come from West Africa. The 23 papers are published by 28 academics based in 13 universities. Although some academics may publish their work in the plethora of journals that have proliferated in recent years, new generation researchers are encouraged to publish in more established journals. The analyses of 187 publications in the WABER conference proceedings revealed 18 research-active universities. Factors like quality of teaching, research and lecturer-student ratio, etc count in the ranking of universities. The findings lay bare some of the areas that should be addressed to improve the landscape of higher education in West Africa.

Pollination ecology in the 21st century: key questions for future research

To inspire new ideas in research on pollination ecology, we list the most important unanswered questions in the field. This list was drawn up by contacting 170 scientists from different areas of pollination ecology and asking them to contribute their opinion on the greatest knowledge gaps that need to be addressed. Almost 40% of them took part in our email poll and we received more than 650 questions and comments, which we classified into different categories representing various aspects of pollination research. The original questions were merged and synthesised, and a final vote and ranking led to the resultant list. The categories cover plant sexual reproduction, pollen and stigma biology, abiotic pollination, evolution of animal-mediated pollination, interactions of pollinators and floral antagonists, pollinator behaviour, taxonomy, plant-pollinator assemblages, geographical trends in diversity, drivers of pollinator loss, ecosystem services, management of pollination, and conservation issues such as the implementation of pollinator conservation. We focused on questions that were of a broad scope rather than case-specific; thus, addressing some questions may not be feasible within single research projects but constitute a general guide for future directions. With this compilation we hope to raise awareness of pollination-related topics not only among researchers but also among non-specialists including policy makers, funding agencies and the public at large.

Farm and socio-economic characteristics of smallholder milk producers and their influence on technology adoption in Central Mexico

In order to identify the factors influencing adoption of technologies promoted by government to small-scale dairy farmers in the highlands of central Mexico, a field survey was conducted. A total of 115 farmers were grouped through cluster analysis (CA) and divided into three wealth status categories (high, medium and low) using wealth ranking. Chi-square analysis was used to examine the association of wealth status with technology adoption. Four groups of farms were differentiated in terms of farms’ dimensions, farmers’ education, sources of incomes, wealth status, management of herd, monetary support by government and technological availability. Statistical differences (p < 0.05) were observed in the milk yield per herd per year among groups. Government organizations (GO) participated little in the promotion of the 17 technologies identified, six of which focused on crop or forage production and 11 of which were related to animal husbandry. Relatives and other farmers played an important role in knowledge diffusion and technology adoption. Although wealth status had a significant association (p < 0.05) with adoption, other factors including importance of the technology to farmers, usefulness and productive benefits of innovations together with farmers’ knowledge of them, were important. It is concluded that the analysis of the information per group and wealth status was useful to identify suitable crop or forage related and animal husbandry technologies per group and wealth status of farmers. Therefore the characterizations of farmers could provide a useful starting point for the design and delivery of more appropriate and effective extension.

Improving sequence-based fold recognition by using 3D model quality assessment

Motivation: The ability of a simple method (MODCHECK) to determine the sequence–structure compatibility of a set of structural models generated by fold recognition is tested in a thorough benchmark analysis. Four Model Quality Assessment Programs (MQAPs) were tested on 188 targets from the latest LiveBench-9 automated structure evaluation experiment. We systematically test and evaluate whether the MQAP methods can successfully detect native-likemodels. Results: We show that compared with the other three methods tested MODCHECK is the most reliable method for consistently performing the best top model selection and for ranking the models. In addition, we show that the choice of model similarity score used to assess a model's similarity to the experimental structure can influence the overall performance of these tools. Although these MQAP methods fail to improve the model selection performance for methods that already incorporate protein three dimension (3D) structural information, an improvement is observed for methods that are purely sequence-based, including the best profile–profile methods. This suggests that even the best sequence-based fold recognition methods can still be improved by taking into account the 3D structural information.

Assembling novel protein folds from super-secondary structural fragments

The results of applying a fragment-based protein tertiary structure prediction method to the prediction of 14 CASP5 target domains are described. The method is based on the assembly of supersecondary structural fragments taken from highly resolved protein structures using a simulated annealing algorithm. A number of good predictions for proteins with novel folds were produced, although not always as the first model. For two fold recognition targets, FRAGFOLD produced the most accurate model in both cases, despite the fact that the predictions were not based on a template structure. Although clear progress has been made in improving FRAGFOLD since CASP4, the ranking of final models still seems to be the main problem that needs to be addressed before the next CASP experiment

Improvement of 3D protein models using multiple templates guided by single-template model quality assessment

Motivation: Modelling the 3D structures of proteins can often be enhanced if more than one fold template is used during the modelling process. However, in many cases, this may also result in poorer model quality for a given target or alignment method. There is a need for modelling protocols that can both consistently and significantly improve 3D models and provide an indication of when models might not benefit from the use of multiple target-template alignments. Here, we investigate the use of both global and local model quality prediction scores produced by ModFOLDclust2, to improve the selection of target-template alignments for the construction of multiple-template models. Additionally, we evaluate clustering the resulting population of multi- and single-template models for the improvement of our IntFOLD-TS tertiary structure prediction method. Results: We find that using accurate local model quality scores to guide alignment selection is the most consistent way to significantly improve models for each of the sequence to structure alignment methods tested. In addition, using accurate global model quality for re-ranking alignments, prior to selection, further improves the majority of multi-template modelling methods tested. Furthermore, subsequent clustering of the resulting population of multiple-template models significantly improves the quality of selected models compared with the previous version of our tertiary structure prediction method, IntFOLD-TS.

Root phenomics of crops: opportunities and challenges

Reliable techniques for screening large numbers of plants for root traits are still being developed, but include aeroponic, hydroponic and agar plate systems. Coupled with digital cameras and image analysis software, these systems permit the rapid measurement of root numbers, length and diameter in moderate ( typically <1000) numbers of plants. Usually such systems are employed with relatively small seedlings, and information is recorded in 2D. Recent developments in X-ray microtomography have facilitated 3D non-invasive measurement of small root systems grown in solid media, allowing angular distributions to be obtained in addition to numbers and length. However, because of the time taken to scan samples, only a small number can be screened (typically<10 per day, not including analysis time of the large spatial datasets generated) and, depending on sample size, limited resolution may mean that fine roots remain unresolved. Although agar plates allow differences between lines and genotypes to be discerned in young seedlings, the rank order may not be the same when the same materials are grown in solid media. For example, root length of dwarfing wheat ( Triticum aestivum L.) lines grown on agar plates was increased by similar to 40% relative to wild-type and semi-dwarfing lines, but in a sandy loam soil under well watered conditions it was decreased by 24-33%. Such differences in ranking suggest that significant soil environment-genotype interactions are occurring. Developments in instruments and software mean that a combination of high-throughput simple screens and more in-depth examination of root-soil interactions is becoming viable.

Inequality of educational opportunity in India: changes over time and across states

This paper documents the extent of inequality of educational opportunity in India spanning the period 1983–2004 using National Sample Surveys. We build on recent developments in the literature that have operationalized concepts of inequality of opportunity theory and construct several indices of inequality of educational opportunity for an adult sample. Kerala stands out as the least opportunity-unequal state. Rajasthan, Gujarat, and Uttar Pradesh experienced large-scale falls in the ranking of inequality of opportunities. By contrast, West Bengal and Orissa made significant progress in reducing inequality of opportunity. We also examine the links between progress toward equality of opportunity and a selection of pro-poor policies.