Preparation and magnetic properties of La–Mn and La–Co doped barium hexaferrites prepared via an improved co-precipitation/molten salt method

LaMn and LaCo doped barium hexaferrites of formula Ba(1-x)LaxFe(12-x)MxO19 (M=Mn, Co) (x=0.05 to 0.40) were prepared with an improved co-precipitation/molten salt method. For the synthesis, aqueous solutions of the appropriate metal chlorides were prepared in the ratio required except that the initial mole ratio of Fe and dopants to Ba was chosen to be 11:1, and then mixed with excess Na2CO3. The solutions were then cooled, filtered off, dried, then mixed with KCl flux, and heated at 450 degrees C and for 2 h. The temperature was then raised to 950 degrees C and kept for 4 h, then cooled. This new synthesis method, which employs a lower temperature and shorter reaction time, gives products with improved crystallinity and purity while the saturation magnetization and coercivity values are comparable with those synthesized via the high temperature method.

Efficiency and purity control in the preparation of pure and/or aluminum-doped barium ferrites by hydrothermal methods using ferrous ions as reactants

The synthesis of hexagonal barium ferrite (BaFe12O19) was studied under hydrothermal conditions by a method in which a significant amount of ferrous chloride was introduced along side ferric chloride among the starting materials. Though all of the Fe2+ ions in the starting material were converted to Fe3+ ions in the final product, Fe2+ was confirmed to participate differently from the Fe3+ used in the conventional method in the mechanism of forming barium ferrite. Indeed the efficiency of the synthesis and the quality of the product and the lack of impurities such as Fe2O3 and BaFe2O4 were improved when Fe2+ was included. However, the amount of ferrous ions that could be included to obtain the desired product was limited with an optimum ratio of 2:8 for FeCl2/FeCl3 when only 2h of reaction time were needed. It was also found that the role of trivalent Fe3+ could be successfully replaced by Al3+. Up to 50% of their on could be replaced by Al3+ in the reactants to produce Al- doped products. It was also found that the ratio of Fe2+/M3+ could be increased in the presence of Al3+ to produce high quality barium ferrite.

Good practice in reviewing and publishing studies on herbal medicine, with special emphasis on traditional Chinese medicine and Chinese materia medica

Ethnopharmacological relevance: Studies on traditional Chinese medicine (TCM), like those of other systems of traditional medicine (TM), are very variable in their quality, content and focus, resulting in issues around their acceptability to the global scientific community. In an attempt to address these issues, an European Union funded FP7 consortium, composed of both Chinese and European scientists and named “Good practice in traditional Chinese medicine” (GP-TCM), has devised a series of guidelines and technical notes to facilitate good practice in collecting, assessing and publishing TCM literature as well as highlighting the scope of information that should be in future publications on TMs. This paper summarises these guidelines, together with what has been learned through GP-TCM collaborations, focusing on some common problems and proposing solutions. The recommendations also provide a template for the evaluation of other types of traditional medicine such as Ayurveda, Kampo and Unani. Materials and methods: GP-TCM provided a means by which experts in different areas relating to TCM were able to collaborate in forming a literature review good practice panel which operated through e-mail exchanges, teleconferences and focused discussions at annual meetings. The panel involved coordinators and representatives of each GP-TCM work package (WP) with the latter managing the testing and refining of such guidelines within the context of their respective WPs and providing feedback. Results: A Good Practice Handbook for Scientific Publications on TCM was drafted during the three years of the consortium, showing the value of such networks. A “deliverable – central questions – labour division” model had been established to guide the literature evaluation studies of each WP. The model investigated various scoring systems and their ability to provide consistent and reliable semi-quantitative assessments of the literature, notably in respect of the botanical ingredients involved and the scientific quality of the work described. This resulted in the compilation of (i) a robust scoring system and (ii) a set of minimum standards for publishing in the herbal medicines field, based on an analysis of the main problems identified in published TCM literature.

Breathable roofing membranes and bats: interactions, outcomes and predictions

In order to achieve sustainability it is necessary to balance the interactions between the built and natural environment. Biodiversity plays an important part towards sustainability within the built environment, especially as the construction industry comes under increasing pressure to take ecological concerns into account. Bats constitute an important component of urban biodiversity and several species are now highly dependent on buildings, making them particularly vulnerable to anthropogenic and environmental changes. As many buildings suitable for use as bat roosts age, they often require re-roofing and traditional bituminous roofing felts are frequently being replaced with breathable roofing membranes (BRMs), which are designed to reduce condensation. Whilst the current position of bats is better in many respects than 30 years ago, new building regulations and modern materials, may substantially reduce the viability of existing roosts. At the same time building regulations require that materials be fit for purpose and with anecdotal evidence that both bats and BRMs may experience problems when the two interact, it is important to know what roost characteristics are essential for house dwelling bats and how these and BRMs may be affected. This paper reviews current literature and knowledge and considers the possible ways in which bats and BRMs may interact, how this could affect existing bat roosts within buildings and the implications for BRM service life predictions and warranties. It concludes that in order for the construction and conservation sectors to work together in solving this issue, a set of clear guidelines should be developed for use on a national level.

Preparation and magnetic properties of barium ferrites substituted with manganese, cobalt, and tin

Barium ferrites substituted by Mn–Sn, Co–Sn, and Mn–Co–Sn with general formulae BaFe12−2xMnxSnxO19 (x=0.2–1.0), BaFe12−2xCoxSnxO19 (x=0.2–0.8), and BaFe12−2xCox/2Mnx/2SnxO19 (x=0.1–0.6), respectively, have been prepared by a previously reported co-precipitation method. The efficiency of the method was refined by lowering the reaction temperature and shortening the required reaction time, due to which crystallinity improved and the value of saturated magnetization increased as well. Low coercivity temperature coefficients, which are adjustable by doping, were achieved by Mn–Sn and Mn–Co–Sn doping. Synthesis efficiency and the effect of doping are discussed taking into account accumulated data concerning the synthesis and crystal structure of ferrites.

Mobility based energy efficient and multi-sink algorithms for consumer home networks

With the fast development of the Internet, wireless communications and semiconductor devices, home networking has received significant attention. Consumer products can collect and transmit various types of data in the home environment. Typical consumer sensors are often equipped with tiny, irreplaceable batteries and it therefore of the utmost importance to design energy efficient algorithms to prolong the home network lifetime and reduce devices going to landfill. Sink mobility is an important technique to improve home network performance including energy consumption, lifetime and end-to-end delay. Also, it can largely mitigate the hot spots near the sink node. The selection of optimal moving trajectory for sink node(s) is an NP-hard problem jointly optimizing routing algorithms with the mobile sink moving strategy is a significant and challenging research issue. The influence of multiple static sink nodes on energy consumption under different scale networks is first studied and an Energy-efficient Multi-sink Clustering Algorithm (EMCA) is proposed and tested. Then, the influence of mobile sink velocity, position and number on network performance is studied and a Mobile-sink based Energy-efficient Clustering Algorithm (MECA) is proposed. Simulation results validate the performance of the proposed two algorithms which can be deployed in a consumer home network environment.

Structure and magnetic properties of mono- and bi-dispersed ferrofluids as revealed by simulations

Using a Langevin molecular dynamics simulation, we show that the magnetic properties of a mono- and bi-dispersed ferrofluid system depend on the volume fraction and the dipolar coupling parameter. For the bi-dispersed system, most of the chains are formed by the large particles, but the aggregation behavior of the large particles is hindered by the presence of the small particles, which are predominantly attached to the end of the particle chain. To further elucidate the microscopic fluid structure, anisotropic structure factors are calculated.

Otherworlds: fantasy and history in medieval literature

This book offers a new perspective on the otherworlds of medieval literature. These fantastical realms are among the most memorable places in medieval writing, by turns beautiful and monstrous, alluring and terrifying. Passing over a river or sea, or entering into a hollow hill, heroes come upon strange and magical realms. These places are often very beautiful, filled with sweet music and adorned with precious stones and rich materials. There is often no darkness, time may pass at a different pace, and the people who dwell there are usually supernatural. Sometimes such a place is exactly what it appears to be-the land of heart's desire-but, the otherworld can also have a sinister side, trapping humans and keeping them there against their will. Otherworlds: Fantasy and History in Medieval Literature takes a fresh look at how medieval writers understood these places and why they found them so compelling. It focuses on texts from England, but places this material in the broader context of literary production in medieval Britain and Ireland. The narratives examined in this book tell a rather surprising story about medieval notions of these fantastical places. Otherworlds are actually a lot less 'other' than they might initially seem. Authors often use the idea of the otherworld to comment on very serious topics. It is not unusual for otherworld depictions to address political issues in the historical world. Most intriguing of all are those texts where locations in the real world are re-imagined as otherworlds. The regions on which this book focuses, Britain, Ireland and the surrounding islands, prove particularly susceptible to this characterization.