27 resultados para on-line condition monitoring


Relevância:

100.00% 100.00%

Publicador:

Resumo:

We investigated the on-line processing of unaccusative and unergative sentences in a group of eight Greek-speaking individuals diagnosed with Broca aphasia and a group of language-unimpaired subjects used as the baseline. The processing of unaccusativity refers to the reactivation of the postverbal trace by retrieving the mnemonic representation of the verb’s syntactically defined antecedent provided in the early part of the sentence. Our results demonstrate that the Broca group showed selective reactivation of the antecedent for the unaccusatives. We consider several interpretations for our data, including explanations focusing on the transitivization properties of nonactive and active voice-alternating unaccusatives, the costly procedure claimed to underlie the parsing of active nonvoice-alternating unaccusatives, and the animacy of the antecedent modulating the syntactic choices of the patients.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper introduces a new adaptive nonlinear equalizer relying on a radial basis function (RBF) model, which is designed based on the minimum bit error rate (MBER) criterion, in the system setting of the intersymbol interference channel plus a co-channel interference. Our proposed algorithm is referred to as the on-line mixture of Gaussians estimator aided MBER (OMG-MBER) equalizer. Specifically, a mixture of Gaussians based probability density function (PDF) estimator is used to model the PDF of the decision variable, for which a novel on-line PDF update algorithm is derived to track the incoming data. With the aid of this novel on-line mixture of Gaussians based sample-by-sample updated PDF estimator, our adaptive nonlinear equalizer is capable of updating its equalizer’s parameters sample by sample to aim directly at minimizing the RBF nonlinear equalizer’s achievable bit error rate (BER). The proposed OMG-MBER equalizer significantly outperforms the existing on-line nonlinear MBER equalizer, known as the least bit error rate equalizer, in terms of both the convergence speed and the achievable BER, as is confirmed in our simulation study

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The present study compared production and on-line comprehension of definite articles and third person direct object clitic pronouns in Greek-speaking typically developing, sequential bilingual (L2-TD) children and monolingual children with specific language impairment (L1-SLI). Twenty Turkish Greek L2-TD children, 16 Greek L1-SLI children, and 31 L1-TD Greek children participated in a production task examining definite articles and clitic pronouns and, in an on-line comprehension task, involving grammatical sentences with definite articles and clitics and sentences with grammatical violations induced by omitted articles and clitics. The results showed that the L2-TD children were sensitive to the grammatical violations despite low production. In contrast, the children with SLI were not sensitive to clitic omission in the on-line task, despite high production. These results support a dissociation between production and on-line comprehension in L2 children and for impaired grammatical representations and lack of automaticity in children with SLI. They also suggest that on-line comprehension tasks may complement production tasks by differentiating between the language profiles of L2-TD children and children with SLI.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We report on the first realtime ionospheric predictions network and its capabilities to ingest a global database and forecast F-layer characteristics and "in situ" electron densities along the track of an orbiting spacecraft. A global network of ionosonde stations reported around-the-clock observations of F-region heights and densities, and an on-line library of models provided forecasting capabilities. Each model was tested against the incoming data; relative accuracies were intercompared to determine the best overall fit to the prevailing conditions; and the best-fit model was used to predict ionospheric conditions on an orbit-to-orbit basis for the 12-hour period following a twice-daily model test and validation procedure. It was found that the best-fit model often provided averaged (i.e., climatologically-based) accuracies better than 5% in predicting the heights and critical frequencies of the F-region peaks in the latitudinal domain of the TSS-1R flight path. There was a sharp contrast however, in model-measurement comparisons involving predictions of actual, unaveraged, along-track densities at the 295 km orbital altitude of TSS-1R In this case, extrema in the first-principle models varied by as much as an order of magnitude in density predictions, and the best-fit models were found to disagree with the "in situ" observations of Ne by as much as 140%. The discrepancies are interpreted as a manifestation of difficulties in accurately and self-consistently modeling the external controls of solar and magnetospheric inputs and the spatial and temporal variabilities in electric fields, thermospheric winds, plasmaspheric fluxes, and chemistry.

Relevância:

100.00% 100.00%

Publicador:

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We develop an on-line Gaussian mixture density estimator (OGMDE) in the complex-valued domain to facilitate adaptive minimum bit-error-rate (MBER) beamforming receiver for multiple antenna based space-division multiple access systems. Specifically, the novel OGMDE is proposed to adaptively model the probability density function of the beamformer’s output by tracking the incoming data sample by sample. With the aid of the proposed OGMDE, our adaptive beamformer is capable of updating the beamformer’s weights sample by sample to directly minimize the achievable bit error rate (BER). We show that this OGMDE based MBER beamformer outperforms the existing on-line MBER beamformer, known as the least BER beamformer, in terms of both the convergence speed and the achievable BER.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A new online method to analyse water isotopes of speleothem fluid inclusions using a wavelength scanned cavity ring down spectroscopy (WS-CRDS) instrument is presented. This novel technique allows us simultaneously to measure hydrogen and oxygen isotopes for a released aliquot of water. To do so, we designed a new simple line that allows the online water extraction and isotope analysis of speleothem samples. The specificity of the method lies in the fact that fluid inclusions release is made on a standard water background, which mainly improves the δ D robustness. To saturate the line, a peristaltic pump continuously injects standard water into the line that is permanently heated to 140 °C and flushed with dry nitrogen gas. This permits instantaneous and complete vaporisation of the standard water, resulting in an artificial water background with well-known δ D and δ18O values. The speleothem sample is placed in a copper tube, attached to the line, and after system stabilisation it is crushed using a simple hydraulic device to liberate speleothem fluid inclusions water. The released water is carried by the nitrogen/standard water gas stream directly to a Picarro L1102-i for isotope determination. To test the accuracy and reproducibility of the line and to measure standard water during speleothem measurements, a syringe injection unit was added to the line. Peak evaluation is done similarly as in gas chromatography to obtain &delta D; and δ18O isotopic compositions of measured water aliquots. Precision is better than 1.5 ‰ for δ D and 0.4 ‰ for δ18O for water measurements for an extended range (−210 to 0 ‰ for δ D and −27 to 0 ‰ for δ18O) primarily dependent on the amount of water released from speleothem fluid inclusions and secondarily on the isotopic composition of the sample. The results show that WS-CRDS technology is suitable for speleothem fluid inclusion measurements and gives results that are comparable to the isotope ratio mass spectrometry (IRMS) technique.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The present article examines production and on-line processing of definite articles in Turkish-speaking sequential bilingual children acquiring English and Dutch as second languages (L2) in the UK and in the Netherlands, respectively. Thirty-nine 6–8-year-old L2 children and 48 monolingual (L1) age-matched children participated in two separate studies examining the production of definite articles in English and Dutch in conditions manipulating semantic context, that is, the anaphoric and the bridging contexts. Sensitivity to article omission was examined in the same groups of children using an on-line processing task involving article use in the same semantic contexts as in the production task. The results indicate that both L2 children and L1 controls are less accurate when definiteness is established by keeping track of the discourse referents (anaphoric) than when it is established via world knowledge (bridging). Moreover, despite variable production, all groups of children were sensitive to the omission of definite articles in the on-line comprehension task. This suggests that the errors of omission are not due to the lack of abstract syntactic representations, but could result from processes implicated in the spell-out of definite articles. The findings are in line with the idea that variable production in child L2 learners does not necessarily indicate lack of abstract representations (Haznedar and Schwartz, 1997).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper reports the results of a study comparing the interactional dynamics of face-to-face and on-line peer-tutoring in writing by university students in Hong Kong. Transcripts of face-to-face tutoring sessions, as well as logs of on-line sessions conducted by the same peer-tutors, were coded for speech functions using a system based on Halliday's functional-semantic view of dialogue. Results show considerable differences between the interactional dynamics in on-line and face-to-face tutoring sessions. In particular, face-to-face interactions involved more hierarchal encounters in which tutors took control of the discourse, whereas on-line interactions were more egalitarian, with clients controlling the discourse more. Differences were also found in the topics participants chose to focus on in the two modes, with issues of grammar, vocabulary, and style taking precedence in face-to-face sessions and more “global” writing concerns like content and process being discussed more in on-line sessions.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study investigates the production and on-line processing of English tense morphemes by sequential bilingual (L2) Turkish-speaking children with more than three years of exposure to English. Thirty nine 6-9-year-old L2 children and 28 typically developing age-matched monolingual (L1) children were administered the production component for third person –s and past tense of the Test for Early Grammatical Impairment (Rice & Wexler, 1996) and participated in an on-line word-monitoring task involving grammatical and ungrammatical sentences with presence/omission of tense (third person –s, past tense -ed) and non-tense (progressive –ing, possessive ‘s) morphemes. The L2 children’s performance on the on-line task was compared to that of children with Specific Language Impairment (SLI) in Montgomery & Leonard (1998, 2006) to ascertain similarities and differences between the two populations. Results showed that the L2 children were sensitive to the ungrammaticality induced by the omission of tense morphemes, despite variable production. This reinforces the claim about intact underlying syntactic representations in child L2 acquisition despite non target-like production (Haznedar & Schwartz, 1997).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In this paper we consider the scattering of a plane acoustic or electromagnetic wave by a one-dimensional, periodic rough surface. We restrict the discussion to the case when the boundary is sound soft in the acoustic case, perfectly reflecting with TE polarization in the EM case, so that the total field vanishes on the boundary. We propose a uniquely solvable first kind integral equation formulation of the problem, which amounts to a requirement that the normal derivative of the Green's representation formula for the total field vanish on a horizontal line below the scattering surface. We then discuss the numerical solution by Galerkin's method of this (ill-posed) integral equation. We point out that, with two particular choices of the trial and test spaces, we recover the so-called SC (spectral-coordinate) and SS (spectral-spectral) numerical schemes of DeSanto et al., Waves Random Media, 8, 315-414 1998. We next propose a new Galerkin scheme, a modification of the SS method that we term the SS* method, which is an instance of the well-known dual least squares Galerkin method. We show that the SS* method is always well-defined and is optimally convergent as the size of the approximation space increases. Moreover, we make a connection with the classical least squares method, in which the coefficients in the Rayleigh expansion of the solution are determined by enforcing the boundary condition in a least squares sense, pointing out that the linear system to be solved in the SS* method is identical to that in the least squares method. Using this connection we show that (reflecting the ill-posed nature of the integral equation solved) the condition number of the linear system in the SS* and least squares methods approaches infinity as the approximation space increases in size. We also provide theoretical error bounds on the condition number and on the errors induced in the numerical solution computed as a result of ill-conditioning. Numerical results confirm the convergence of the SS* method and illustrate the ill-conditioning that arises.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A Kalman filter algorithm has been applied to interpret the optical reflectance excursions during vacuum deposition of infrared coatings and multilayer thin-film filters. The application has been described in detail elsewhere and this paper now reports on-line experience for estimating deposition rate and thickness. The estimation proved sufficiently reliable to firstly 'navigate' regular manufacture (as controlled by a skilled operator) and to subsequently reproduce the skill without interpretation or intervention whilst maintaining exemplary product quality. Optical control by means of this Kalman filter application is therefore considered suitable as a basis for the automated manufacture of infrared coatings and multilayer thin-film filters.