Assessment of the presence of Salmonella spp. in Egyptian dairy products using various detection media

Aims: To make a preliminary assessment of the incidence of Salmonella in Egyptian dairy products, and to investigate the effectiveness of various protocols for the detection of the pathogen in these products. Methods and Results: Samples of milk and related dairy products were randomly collected from local markets and examined for the presence of Salmonella. While most samples were free of the organism, isolates of Salmonella enterica subsp. enterica serovar Typhimurium PT 8 could be recovered from 'matared' cream specimens. These isolates were susceptible to antibiotics usually used to challenge infections caused by Salmonella. A combination of buffered peptone water, Muller-Kauffman tetrathionate broth, and brilliant green phenol red agar gave the best results for the detection of the pathogen. Selenite-cystine broth and Hektoen enteric agar were ineffective as an enrichment and a plating medium, respectively, in the isolation of Salmonella. A modified identification strategy that reduces the burden of serological testing of presumptive isolates is proposed. Conclusions, Significance and Impact of the Study: 'Matared' cream could be a vehicle for transmitting Salmonella. Using the above combination of media, beside the suggested modified confirmatory procedure, should increase the effectiveness and ease of the detection of Salmonella in milk and dairy products.

Unwanted memories of assault: what intrusion characteristics are associated with PTSD?

Intrusive memories are common in the immediate aftermath of traumatic events, but neither their presence or frequency are good predictors of the persistence of posttraumatic stress disorder (PTSD). Two studies of assault survivors, a cross-sectional study (N = 81) and a 6-month prospective longitudinal study (N = 73), explored whether characteristics of the intrusive memories improve the prediction. Intrusion characteristics were assessed with an Intrusion Interview and an Intrusion Provocation Task. The distress caused by the intrusions, their "here and now" quality, and their lack of a context predicted PTSD severity. The presence of intrusive memories only explained 9% of the variance of PTSD severity at 6 months after assault. Among survivors with intrusions, intrusion frequency only explained 8% of the variance of PTSD symptom severity at 6 months. Nowness, distress and lack of context explained an additional 43% of the variance. These intrusion characteristics also predicted PTSD severity at 6 months over and above what could be predicted from PTSD diagnostic status at initial assessment. Further predictors of PTSD severity were rumination about. the intrusive memories, and the ease and persistence with which intrusive memories could be triggered by photographs depicting assaults. The results have implications for the early identification of trauma survivors at risk of chronic PTSD. (c) 2004 Elsevier Ltd. All rights reserved.

'Word-learning wizardry' at I;6

This article explores whether infants are able to learn words as rapidly as has been reported for preschoolers. Sixty-four infants aged 1;6 were taught labels for either two moving images or two still images. Each image-label pair was presented three times, after which comprehension was assessed using an adaptation of the intermodal preferential looking paradigm. Three repetitions of each label were found to be sufficient for learning to occur, fewer than has previously been reported for infants under two years. Moreover, contrary to a previous finding, learning was equally rapid for infants who were taught labels for moving versus still images. The findings indicate that infants in the early stages of acquiring a vocabulary learn new word-referent associations with ease, and that the learning conditions that allow such learning are less restricted that was previously believed.

Control of a compliant two-axis robotic arm

In order to ease control, the links between actuators and robotic limbs are generally made to be as stiff as possible. This is in contrast to natural limbs, where compliance is present. Springs have been added to the drive train between the actuator and load to imitate this natural compliance. The majority of these springs have been in series between the actuator and load. However, a more biologically inspired approach is taken, here springs have been used in parallel to oppose each other. The paper will describe the application of parallel extension springs in a robot arm in order to give it compliance. Advantages and disadvantages of this application are discussed along with various control strategies.

Design considerations for the multiband OFDM physical layer in consumer electronic products

The creation of Wireless Personal Area Networks (WPANs) offers the Consumer Electronics industry a mechanism to truly unwire consumer products, leading to portability and ease of installation as never seen before. WPAN's can offer data-rates exceeding those that are required to convey high quality broadcast video, thus users can easily connect to high quality video for multimedia presentations in education, libraries, advertising, or have a wireless connection at home. There have been many WPAN proposals, but this paper concentrates on ECMA-368 as this standard has the largest industrial and implementers' forum backing. This paper discusses the technology behind ECMA-368, the required numerical bandwidth, buffer memory requirements and implementation considerations while concentrating on supporting all the offered data-rates'.

Towards natural human computer interaction in BCI

BCI systems require correct classification of signals interpreted from the brain for useful operation. To this end this paper investigates a method proposed in [1] to correctly classify a series of images presented to a group of subjects in [2]. We show that it is possible to use the proposed methods to correctly recognise the original stimuli presented to a subject from analysis of their EEG. Additionally we use a verification set to show that the trained classification method can be applied to a different set of data. We go on to investigate the issue of invariance in EEG signals. That is, the brain representation of similar stimuli is recognisable across different subjects. Finally we consider the usefulness of the methods investigated towards an improved BCI system and discuss how it could potentially lead to great improvements in the ease of use for the end user by offering an alternative, more intuitive control based mode of operation.

Use of auditory cues for wayfinding assistance in virtual environment: music aids route decision

This paper addresses the crucial problem of wayfinding assistance in the Virtual Environments (VEs). A number of navigation aids such as maps, agents, trails and acoustic landmarks are available to support the user for navigation in VEs, however it is evident that most of the aids are visually dominated. This work-in-progress describes a sound based approach that intends to assist the task of 'route decision' during navigation in a VE using music. Furthermore, with use of musical sounds it aims to reduce the cognitive load associated with other visually as well as physically dominated tasks. To achieve these goals, the approach exploits the benefits provided by music to ease and enhance the task of wayfinding, whilst making the user experience in the VE smooth and enjoyable.

Sparse multioutput radial basis function network construction using combined locally regularised orthogonal least square and D-optimality experimental design

A construction algorithm for multioutput radial basis function (RBF) network modelling is introduced by combining a locally regularised orthogonal least squares (LROLS) model selection with a D-optimality experimental design. The proposed algorithm aims to achieve maximised model robustness and sparsity via two effective and complementary approaches. The LROLS method alone is capable of producing a very parsimonious RBF network model with excellent generalisation performance. The D-optimality design criterion enhances the model efficiency and robustness. A further advantage of the combined approach is that the user only needs to specify a weighting for the D-optimality cost in the combined RBF model selecting criterion and the entire model construction procedure becomes automatic. The value of this weighting does not influence the model selection procedure critically and it can be chosen with ease from a wide range of values.

Sparse kernel regression modeling using combined locally regularized orthogonal least squares and D-optimality experimental design

The note proposes an efficient nonlinear identification algorithm by combining a locally regularized orthogonal least squares (LROLS) model selection with a D-optimality experimental design. The proposed algorithm aims to achieve maximized model robustness and sparsity via two effective and complementary approaches. The LROLS method alone is capable of producing a very parsimonious model with excellent generalization performance. The D-optimality design criterion further enhances the model efficiency and robustness. An added advantage is that the user only needs to specify a weighting for the D-optimality cost in the combined model selecting criterion and the entire model construction procedure becomes automatic. The value of this weighting does not influence the model selection procedure critically and it can be chosen with ease from a wide range of values.

Design issues toward a cost effective physical layer for multiband OFDM (ECMA-368) in consumer products

The creation of Wireless Personal Area Networks (WPANs) offers the Consumer Electronics industry a mechanism to truly unwire consumer products, leading to portability and ease of installation as never seen before. WPAN's can offer data-rates exceeding those that are required to convey high quality broadcast video, thus users can easily connect to high quality video for multimedia presentations in education, libraries, advertising, or have a wireless connection at home. There have been many WPAN proposals, but this paper concentrates on ECMA-368 as this standard has the largest industrial and implementers' forum backing. With the aim to effective consumer electronic define and create cost equipment this paper discusses the technology behind ECMA-368 physical layer, the design freedom availabilities, the required processing, buffer memory requirements and implementation considerations while concentrating on supporting all the offered data-rates(1).

Hydrogen bond-induced pair formation of glycine on the chiral Cu{531} surface

Enantio-specific interactions on intrinsically chiral or chirally modified surfaces can be identified experimentally via comparison of the adsorption geometries of similar nonchiral and chiral molecules. Information about the effects of substrate-related and in interactions on the adsorption geometry of glycine, the only natural nonchiral amino acid, is therefore important for identifying enantio-specific interactions of larger chiral amino acids. We have studied the long- and short-range adsorption geometry and bonding properties of glycine on the intrinsically chiral Cu{531} surface with low-energy electron diffraction, near-edge X-ray absorption One structure spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed desorption. For coverages between 0.15 and 0.33 ML (saturated chemisorbed layer) and temperatures between 300 and 430 K, glycine molecules adsorb in two different azimuthal orientations, which are associated with adsorption sites on the {110} and {311} microfacets of Cu{531}. Both types of adsorption sites allow a triangular footprint with surface bonds through the two oxygen atoms and the nitrogen atom. The occupation of the two adsorption sites is equal for all coverages, which can be explained by pair formation due to similar site-specific adsorption energies and the possibility of forming hydrogen bonds between molecules on adjacent {110} and {311} sites. This is not the ease for alanine and points toward higher site specificity in the case of alanine, which is eventually responsible for the enantiomeric differences observed for the alanine system.

What does a transdiagnostic approach have to offer the treatment of anxiety disorders?

Purpose: The purpose of this paper is to review the rationale for 'transdiagnostic' approaches to the understanding and treatment of anxiety disorders. Methods: Databases searches and examination of the reference lists of relevant studies were used to identify papers of relevance. Results: There is increasing recognition that diagnosis-specific interventions for single anxiety-disorders are of less value than might appear since a large proportion of patients have more than one co-existing anxiety disorder and the treatment of one anxiety disorder does not necessarily lead to the resolution of others. As transdiagnostic approaches have the potential to address multiple co-existing anxiety disorders they are potentially more clinically relevant than single anxiety disorder interventions. They may also have advantages in ease of dissemination and in treating anxiety disorder not otherwise specified. Conclusions: The merits of the various transdiagnostic cognitive-behavioral approaches that have been proposed are reviewed. Such approaches have potential benefits, particularly in striking the balance between completely idiosyncratic formulations and diagnosis-driven treatments of anxiety disorders. However, caution is needed to ensure that transdiagnostic theories and treatments benefit from progress made by research on diagnosis-specific treatments, and further empirical work is needed to identify the shared maintaining processes that need to be targeted in the treatment of anxiety disorders.

Design of highly parallel architecture with Alpha and Handel

We propose a bridge between two important parallel programming paradigms: data parallelism and communicating sequential processes (CSP). Data parallel pipelined architectures obtained with the Alpha language can be embedded in a control intensive application expressed in CSP-based Handel formalism. The interface is formally defined from the semantics of the languages Alpha and Handel. This work will ease the design of compute intensive applications on FPGAs.

Geostatistical analysis of rainfall

Rainfall can be modeled as a spatially correlated random field superimposed on a background mean value; therefore, geostatistical methods are appropriate for the analysis of rain gauge data. Nevertheless, there are certain typical features of these data that must be taken into account to produce useful results, including the generally non-Gaussian mixed distribution, the inhomogeneity and low density of observations, and the temporal and spatial variability of spatial correlation patterns. Many studies show that rigorous geostatistical analysis performs better than other available interpolation techniques for rain gauge data. Important elements are the use of climatological variograms and the appropriate treatment of rainy and nonrainy areas. Benefits of geostatistical analysis for rainfall include ease of estimating areal averages, estimation of uncertainties, and the possibility of using secondary information (e.g., topography). Geostatistical analysis also facilitates the generation of ensembles of rainfall fields that are consistent with a given set of observations, allowing for a more realistic exploration of errors and their propagation in downstream models, such as those used for agricultural or hydrological forecasting. This article provides a review of geostatistical methods used for kriging, exemplified where appropriate by daily rain gauge data from Ethiopia.

An ECOOP web portal for visualising and comparing distributed coastal oceanography model and in situ data

As part of a large European coastal operational oceanography project (ECOOP), we have developed a web portal for the display and comparison of model and in situ marine data. The distributed model and in situ datasets are accessed via an Open Geospatial Consortium Web Map Service (WMS) and Web Feature Service (WFS) respectively. These services were developed independently and readily integrated for the purposes of the ECOOP project, illustrating the ease of interoperability resulting from adherence to international standards. The key feature of the portal is the ability to display co-plotted timeseries of the in situ and model data and the quantification of misfits between the two. By using standards-based web technology we allow the user to quickly and easily explore over twenty model data feeds and compare these with dozens of in situ data feeds without being concerned with the low level details of differing file formats or the physical location of the data. Scientific and operational benefits to this work include model validation, quality control of observations, data assimilation and decision support in near real time. In these areas it is essential to be able to bring different data streams together from often disparate locations.