Choosing the number of doses and the cohort size for phase I dose-escalation studies

This paper reviews Bayesian procedures for phase 1 dose-escalation studies and compares different dose schedules and cohort sizes. The methodology described is motivated by the situation of phase 1 dose-escalation studiesin oncology, that is, a single dose administered to each patient, with a single binary response ("toxicity"' or "no toxicity") observed. It is likely that a wider range of applications of the methodology is possible. In this paper, results from 10000-fold simulation runs conducted using the software package Bayesian ADEPT are presented. Four designs were compared under six scenarios. The simulation results indicate that there are slight advantages of having more dose levels and smaller cohort sizes.

Bayesian decision procedures for dose-escalation based on evidence of undesirable events and therapeutic benefit.

In this paper, Bayesian decision procedures are developed for dose-escalation studies based on bivariate observations of undesirable events and signs of therapeutic benefit. The methods generalize earlier approaches taking into account only the undesirable outcomes. Logistic regression models are used to model the two responses, which are both assumed to take a binary form. A prior distribution for the unknown model parameters is suggested and an optional safety constraint can be included. Gain functions to be maximized are formulated in terms of accurate estimation of the limits of a therapeutic window or optimal treatment of the next cohort of subjects, although the approach could be applied to achieve any of a wide variety of objectives. The designs introduced are illustrated through simulation and retrospective implementation to a completed dose-escalation study. Copyright © 2006 John Wiley & Sons, Ltd.

An evaluation of a Bayesian method of dose escalation based on bivariate binary responses

Recently, various approaches have been suggested for dose escalation studies based on observations of both undesirable events and evidence of therapeutic benefit. This article concerns a Bayesian approach to dose escalation that requires the user to make numerous design decisions relating to the number of doses to make available, the choice of the prior distribution, the imposition of safety constraints and stopping rules, and the criteria by which the design is to be optimized. Results are presented of a substantial simulation study conducted to investigate the influence of some of these factors on the safety and the accuracy of the procedure with a view toward providing general guidance for investigators conducting such studies. The Bayesian procedures evaluated use logistic regression to model the two responses, which are both assumed to be binary. The simulation study is based on features of a recently completed study of a compound with potential benefit to patients suffering from inflammatory diseases of the lung.

An evaluation of Bayesian designs for dose-escalation studies in healthy volunteers

In this paper, Bayesian decision procedures previously proposed for dose-escalation studies in healthy volunteers are reviewed and evaluated. Modifications are made to the expression of the prior distribution in order to make the procedure simpler to implement and a more relevant criterion for optimality is introduced. The results of an extensive simulation exercise to establish the proper-ties of the procedure and to aid choice between designs are summarized, and the way in which readers can use simulation to choose a design for their own trials is described. The influence of the value of the within-subject correlation on the procedure is investigated and the use of a simple prior to reflect uncertainty about the correlation is explored. Copyright (c) 2005 John Wiley & Sons, Ltd.

Statistical evaluation of an acute dermal toxicity test using the dermal fixed dose procedure

The conventional method for the assessment of acute dermal toxicity (OECD Test Guideline 402, 1987) uses death of animals as an endpoint to identify the median lethal dose (LD50). A new OECD Testing Guideline called the dermal fixed dose procedure (dermal FDP) is being prepared to provide an alternative to Test Guideline 402. In contrast to Test Guideline 402, the dermal FDP does not provide a point estimate of the LD50, but aims to identify that dose of the substance under investigation that causes clear signs of nonlethal toxicity. This is then used to assign classification according to the new Globally Harmonised System of Classification and Labelling scheme (GHS). The dermal FDP has been validated using statistical modelling rather than by in vivo testing. The statistical modelling approach enables calculation of the probability of each GHS classification and the expected numbers of deaths and animals used in the test for imaginary substances with a range of LD50 values and dose-response curve slopes. This paper describes the dermal FDP and reports the results from the statistical evaluation. It is shown that the procedure will be completed with considerably less death and suffering than guideline 402, and will classify substances either in the same or a more stringent GHS class than that assigned on the basis of the LD50 value.

A statistical evaluation of the fixed dose procedure

The fixed-dose procedure (FDP) was introduced as OECD Test Guideline 420 in 1992, as an alternative to the conventional median lethal dose (LD50) test for the assessment of acute oral toxicity (OECD Test Guideline 401). The FDP uses fewer animals and causes less suffering than the conventional test, while providing information on the acute toxicity to allow substances to be ranked according to the EU hazard classification system. Recently the FDP has been revised, with the aim of providing further reductions and refinements, and classification according to the criteria of the Globally Harmonized Hazard Classification and Labelling scheme (GHS). This paper describes the revised FDP and analyses its properties, as determined by a statistical modelling approach. The analysis shows that the revised FDP classifies substances for acute oral toxicity generally in the same, or a more stringent, hazard class as that based on the LD50 value, according to either the GHS or the EU classification scheme. The likelihood of achieving the same classification is greatest for substances with a steep dose-response curve and median toxic dose (TD50) close to the LD50. The revised FDP usually requires five or six animals with two or fewer dying as a result of treatment in most cases.

Immunogenetics of drug-induced skin blistering disorders. Part II: Synthesis

The overall immunopathogenesis relevant to a large series of disorders caused by a drug or its associated hyperimmune condition is discussed based upon examining the genetics of severe drug-induced bullous skin problems (sporadic idiosyncratic adverse events including Stevens-Johnson syndrome and Toxic epidermal necrolysis). New results from an exemplar study on shared precipitating and perpetuating inner causes with other related disease phenotypes including aphtous stomatitis, Behcets, erythema multiforme, Hashimoto's thyroiditis, pemphigus, periodic fevers, Sweet's syndrome and drug-induced multisystem hypersensitivity are presented. A call for a collaborative, wider demographic profiling and deeper immunotyping in suggested future work is made.

Immunogenetics of drug-induced skin blistering disorders. Part I: Perspective

The overall immunopathogenesis relevant to a large series of disorders caused by a drug or its associated hyperimmune condition is discussed based upon the examination of the genetics of severe drug-induced bullous skin problems (sporadic idiosyncratic adverse events, including Stevens-Johnson syndrome and toxic epidermal necrolysis). An overarching pharmacogenetic schema is proposed. Immune cognition and early-effector processes are focused upon and a challenging synthesis around systems evolution is explained by a variety of projective analogies. Etiology, human leukocyte antigen-B, immune stability, clysiregulation, pharmacomimicry, viruses and an aggressive ethnically differentiated 'karmic' response are discussed.

Fungicide resistance: the dose rate debate

It makes economic sense to use as little fungicide as possible on a crop. In many settings, it is common to apply less than the manufacturer's recommended dose. If sources of disease are scarce, or conditions are unsuitable for it to increase, the reduced control from a low dose may be adequate. In other cases, a big reduction in dose may cause little reduction in control, again permitting savings - especially for growers prepared to run a little risk. But the label recommendations for most fungicides state that to avoid resistance, a full dose must always be used. Are individual cost-savings therefore endangering everyone's access to an exceptionally useful tool? The emergence of fungicide resistance is evolution in action. In all cases, it involves the genetic replacement of the original susceptible population of the pathogen by a new population with genetically distinct biochemistry, which confers resistance. The resistant biochemistry originates in rare genetic mutations, so rare that initially the population is hardly altered. Replacement of susceptible forms by resistant ones happens because, with fungicide present, the resistant form multiplies more rapidly than the susceptible form. The key point to notice is that only the relative rates of multiplication of the resistant and susceptible types are involved in the evolution of resistance. The absolute rates are irrelevant.

Implementation of a Bayesian design in a dose-escalation study of an experimental agent in healthy volunteers

Bayesian decision procedures have recently been developed for dose escalation in phase I clinical trials concerning pharmacokinetic responses observed in healthy volunteers. This article describes how that general methodology was extended and evaluated for implementation in a specific phase I trial of a novel compound. At the time of writing, the study is ongoing, and it will be some time before the sponsor will wish to put the results into the public domain. This article is an account of how the study was designed in a way that should prove to be safe, accurate, and efficient whatever the true nature of the compound. The study involves the observation of two pharmacokinetic endpoints relating to the plasma concentration of the compound itself and of a metabolite as well as a safety endpoint relating to the occurrence of adverse events. Construction of the design and its evaluation via simulation are presented.

The staphylococcus aureus surface protein IsdA mediates resistance to the innate defenses of human skin

Resistance to human skin innate defenses is crucial for survival and carriage of Staphylococcus aureus, a common cutaneous pathogen and nasal colonizer. Free fatty acids extracted from human skin sebum possess potent antimicrobial activity against S. aureus. The mechanisms by which S. aureus overcomes this host defense during colonization remain unknown. Here, we show that S. aureus IsdA, a surface protein produced in response to the host, decreases bacterial cellular hydrophobicity rendering them resistant to bactericidal human skin fatty acids and peptides. IsdA is required for survival of S. aureus on live human skin. Reciprocally, skin fatty acids prevent the production of virulence determinants and the induction of antibiotic resistance in S. aureus and other Gram-positive pathogens. A purified human skin fatty acid was effective in treating systemic and topical infections of S. aureus suggesting that our natural defense mechanisms can be exploited to combat drug-resistant pathogens.

A Bayesian approach for dose-escalation in a phase I clinical trial incorporating pharmacodynamic endpoints

Bayesian decision procedures have already been proposed for and implemented in Phase I dose-escalation studies in healthy volunteers. The procedures have been based on pharmacokinetic responses reflecting the concentration of the drug in blood plasma and are conducted to learn about the dose-response relationship while avoiding excessive concentrations. However, in many dose-escalation studies, pharmacodynamic endpoints such as heart rate or blood pressure are observed, and it is these that should be used to control dose-escalation. These endpoints introduce additional complexity into the modeling of the problem relative to pharmacokinetic responses. Firstly, there are responses available following placebo administrations. Secondly, the pharmacodynamic responses are related directly to measurable plasma concentrations, which in turn are related to dose. Motivated by experience of data from a real study conducted in a conventional manner, this paper presents and evaluates a Bayesian procedure devised for the simultaneous monitoring of pharmacodynamic and pharmacokinetic responses. Account is also taken of the incidence of adverse events. Following logarithmic transformations, a linear model is used to relate dose to the pharmacokinetic endpoint and a quadratic model to relate the latter to the pharmacodynamic endpoint. A logistic model is used to relate the pharmacokinetic endpoint to the risk of an adverse event.

Effects of fungicide dose and mixtures on selection for triazole resistance in Mycosphaerella graminicola under field conditions

The effects of varying doses of fungicides, alone or in mixtures, on selection for triazole resistance were examined under field conditions. Two experiments were conducted using the triazole fungicide fluquinconazole with the strobilurin fungicide azoxystrobin as a mixture partner. Inoculated wheat plots with a known ratio of more sensitive to less sensitive isolates of the leaf blotch fungus Mycosphaerella graminicola were sprayed with fungicide and sampled once symptoms had appeared. Selection for fluquinconazole resistance increased in proportion to the dose, up to one-half of the full dose (the maximum tested) in both experiments. At the higher doses of fluquinconazole, the addition of azoxystrobin was associated with a decrease in selection (nonsignificant in the first experiment) for triazole resistance. Control by low doses of fluquinconazole was increased by mixture with azoxystrobin, but at higher doses mixture with azoxystrobin sometimes decreased control, so that reduced selection was obtained at the cost of some reduction in control. The effects on resistance are not necessarily general consequences of mixing fungicides, and suggest that the properties of any specific mixture may need to be demonstrated experimentally. Selection was inversely related to control in the unmixed treatments in both experiments, but the relationship was weaker in the mixtures with azoxystrobin.