Remote gas detection and quantitative analysis from infrared emission spectra obtained by Fourier transform infrared spectroscopy

Techniques for obtaining quantitative values of the temperatures and concentrations of remote hot gaseous effluents from their measured passive emission spectra have been examined in laboratory experiments. The high sensitivity of the spectrometer in the vicinity of the 2397 cm-1 band head region of CO2 has allowed the gas temperature to be calculated from the relative intensity of the observed rotational lines. The spatial distribution of the CO2 in a methane flame has been reconstructed tomographically using a matrix inversion technique. The spectrometer has been calibrated against a black body source at different temperatures and a self absorption correction has been applied to the data avoiding the need to measure the transmission directly. Reconstruction artifacts have been reduced by applying a smoothing routine to the inversion matrix.

Low-molecular-weight gelators: Elucidating the principles of gelation based on gelator solubility and a cooperative self-assembly model

This paper highlights the key role played by solubility in influencing gelation and demonstrates that many facets of the gelation process depend on this vital parameter. In particular, we relate thermal stability (T-gel) and minimum gelation concentration (MGC) values of small-molecule gelation in terms of the solubility and cooperative self-assembly of gelator building blocks. By employing a van't Hoff analysis of solubility data, determined from simple NMR measurements, we are able to generate T-calc values that reflect the calculated temperature for complete solubilization of the networked gelator. The concentration dependence of T-calc allows the previously difficult to rationalize "plateau-region" thermal stability values to be elucidated in terms of gelator molecular design. This is demonstrated for a family of four gelators with lysine units attached to each end of an aliphatic diamine, with different peripheral groups (Z or Bee) in different locations on the periphery of the molecule. By tuning the peripheral protecting groups of the gelators, the solubility of the system is modified, which in turn controls the saturation point of the system and hence controls the concentration at which network formation takes place. We report that the critical concentration (C-crit) of gelator incorporated into the solid-phase sample-spanning network within the gel is invariant of gelator structural design. However, because some systems have higher solubilities, they are less effective gelators and require the application of higher total concentrations to achieve gelation, hence shedding light on the role of the MGC parameter in gelation. Furthermore, gelator structural design also modulates the level of cooperative self-assembly through solubility effects, as determined by applying a cooperative binding model to NMR data. Finally, the effect of gelator chemical design on the spatial organization of the networked gelator was probed by small-angle neutron and X-ray scattering (SANS/SAXS) on the native gel, and a tentative self-assembly model was proposed.

Teacher self-perceptions of effectiveness: a study in a district of Kenya

Background and purpose: The paper reports a study of the perceptions of teachers in secondary schools in the Gucha district of Kenya of their own effectiveness, the structure of their self-perceptions, variations in self-perceived effectiveness and the relationship between self-perceptions of effectiveness and the examination performance of their students. Design and methods: Data were based on questionnaires completed by 109 English and mathematics teachers from a random sample of 30 schools in the Gucha district of Kenya. Pupil examination results were also collected from the schools. Results: Three dimensions of self-perceived effectiveness emerged from a factor analysis. These were: pedagogic process, personal and affective aspects of teaching and effectiveness with regard to pupil performance. Teachers tended to rate themselves relatively highly with regard to the first two, process-oriented, dimensions but less highly on the third, outcome-oriented, dimension. Self-ratings for pupil outcomes correlated with pupil examination performance at school level. Conclusions: The results show that these teachers can have a sense of themselves as competent classroom performers and educational professionals without necessarily having a strong sense of efficacy with regard to pupil outcomes.

Artichoke leaf extract reduces symptoms of irritable bowel syndrome and improves quality of life in otherwise healthy volunteers suffering from concomitant dyspepsia: a subset analysis

Objectives: Does artichoke leaf extract (ALE) ameliorate symptoms of Irritable bowel syndrome (IBS) in otherwise healthy volunteers suffering concomitant dyspepsia? Methods: A subset analysis of a previous dose-ranging, open, postal study, in adults suffering dyspepsia. Two hundred and eight (208) adults were identified post hoc as suffering with IBS. IBS incidence, self-reported usual bowel pattern, and the Nepean Dyspepsia Index (NDI) were compared before and after a 2-month intervention period. Results: There was a significant fall in IBS incidence of 26.4% (p<0.001) after treatment. A significant shift in self-reported usual bowel pattern away from "alternating constipation/diarrhea" toward "normal" (p<0.001) was observed. NDI total symptom score significantly decreased by 41% (p<0.001) after treatment. Similarly, there was a significant 20% improvement in the NDI total quality-of-life (QOL) score in the subset after treatment. Conclusion: This report supports previous findings that ALE ameliorates symptoms of IBS, plus improves health-related QOL.

An experimental analysis of body checking

The relationship between repeated body checking and its impact on body size estimation and body dissatisfaction is of interest for two reasons. First, it has importance in theoretical accounts of the maintenance of eating disorders and, second, body checking is targeted in cognitive-behavioural treatment. The aim of this study was to determine the impact of manipulating body checking on body size estimation and body dissatisfaction. Sixty women were randomly assigned either to repeatedly scrutinize their bodies in a critical way in the mirror ("high body checking") or to refrain from body checking but to examine the whole of their bodies in a neutral way ("low body checking"). Body dissatisfaction, feelings of fatness and the strength of a particular self-critical thought increased immediately after the manipulation among those in the high body checking condition. Feelings of fatness decreased among those in the low body checking condition. These changes were short-lived. The manipulation did not effect estimations of body size or the discrepancy between estimations of body size and desired body size. The implications of these findings for understanding the influence of body checking on the maintenance of body dissatisfaction are considered. (c) 2006 Elsevier Ltd. All rights reserved.

Applying semiotic analysis to the design and modeling of distributed multimedia systems

Semiotics is the study of signs. Application of semiotics in information systems design is based on the notion that information systems are organizations within which agents deploy signs in the form of actions according to a set of norms. An analysis of the relationships among the agents, their actions and the norms would give a better specification of the system. Distributed multimedia systems (DMMS) could be viewed as a system consisted of many dynamic, self-controlled normative agents engaging in complex interaction and processing of multimedia information. This paper reports the work of applying the semiotic approach to the design and modeling of DMMS, with emphasis on using semantic analysis under the semiotic framework. A semantic model of DMMS describing various components and their ontological dependencies is presented, which then serves as a design model and implemented in a semantic database. Benefits of using the semantic database are discussed with reference to various design scenarios.

Characterization and classification of tumor lesions using computerized fractal-based texture analysis and support vector machines in digital mammograms

Objective: This paper presents a detailed study of fractal-based methods for texture characterization of mammographic mass lesions and architectural distortion. The purpose of this study is to explore the use of fractal and lacunarity analysis for the characterization and classification of both tumor lesions and normal breast parenchyma in mammography. Materials and methods: We conducted comparative evaluations of five popular fractal dimension estimation methods for the characterization of the texture of mass lesions and architectural distortion. We applied the concept of lacunarity to the description of the spatial distribution of the pixel intensities in mammographic images. These methods were tested with a set of 57 breast masses and 60 normal breast parenchyma (dataset1), and with another set of 19 architectural distortions and 41 normal breast parenchyma (dataset2). Support vector machines (SVM) were used as a pattern classification method for tumor classification. Results: Experimental results showed that the fractal dimension of region of interest (ROIs) depicting mass lesions and architectural distortion was statistically significantly lower than that of normal breast parenchyma for all five methods. Receiver operating characteristic (ROC) analysis showed that fractional Brownian motion (FBM) method generated the highest area under ROC curve (A z = 0.839 for dataset1, 0.828 for dataset2, respectively) among five methods for both datasets. Lacunarity analysis showed that the ROIs depicting mass lesions and architectural distortion had higher lacunarities than those of ROIs depicting normal breast parenchyma. The combination of FBM fractal dimension and lacunarity yielded the highest A z value (0.903 and 0.875, respectively) than those based on single feature alone for both given datasets. The application of the SVM improved the performance of the fractal-based features in differentiating tumor lesions from normal breast parenchyma by generating higher A z value. Conclusion: FBM texture model is the most appropriate model for characterizing mammographic images due to self-affinity assumption of the method being a better approximation. Lacunarity is an effective counterpart measure of the fractal dimension in texture feature extraction in mammographic images. The classification results obtained in this work suggest that the SVM is an effective method with great potential for classification in mammographic image analysis.

Influence of the solvent on the self-assembly of a modified amyloid beta peptide fragment. II. NMR and computer simulation investigation

The conformation of a model peptide AAKLVFF based on a fragment of the amyloid beta peptide A beta 16-20, KLVFF, is investigated in methanol and water via solution NMR experiments and Molecular dynamics computer simulations. In previous work, we have shown that AAKLVFF forms peptide nanotubes in methanol and twisted fibrils in water. Chemical shift measurements were used to investigate the solubility of the peptide as a function of concentration in methanol and water. This enabled the determination of critical aggregation concentrations, The Solubility was lower in water. In dilute solution, diffusion coefficients revealed the presence of intermediate aggregates in concentrated solution, coexisting with NMR-silent larger aggregates, presumed to be beta-sheets. In water, diffusion coefficients did not change appreciably with concentration, indicating the presence mainly of monomers, coexisting with larger aggregates in more concentrated solution. Concentration-dependent chemical shift measurements indicated a folded conformation for the monomers/intermediate aggregates in dilute methanol, with unfolding at higher concentration. In water, an antiparallel arrangement of strands was indicated by certain ROESY peak correlations. The temperature-dependent solubility of AAKLVFF in methanol was well described by a van't Hoff analysis, providing a solubilization enthalpy and entropy. This pointed to the importance of solvophobic interactions in the self-assembly process. Molecular dynamics Simulations constrained by NOE values from NMR suggested disordered reverse turn structures for the monomer, with an antiparallel twisted conformation for dimers. To model the beta-sheet structures formed at higher concentration, possible model arrangements of strands into beta-sheets with parallel and antiparallel configurations and different stacking sequences were used as the basis for MD simulations; two particular arrangements of antiparallel beta-sheets were found to be stable, one being linear and twisted and the other twisted in two directions. These structures Were used to simulate Circular dichroism spectra. The roles of aromatic stacking interactions and charge transfer effects were also examined. Simulated spectra were found to be similar to those observed experimentally.(in water or methanol) which show a maximum at 215 or 218 nm due to pi-pi* interactions, when allowance is made for a 15-18 nm red-shift that may be due to light scattering effects.

The risk-taking and self-harm inventory for adolescents: Development and psychometric evaluation

In this study, we report on the development and psychometric evaluation of the Risk-Taking (RT) and Self-Harm (SH) Inventory for Adolescents (RTSHIA), a self-report measure designed to assess adolescent RT and SH in community and clinical settings. 651 young people from secondary schools in England ranging in age from 11.6 years to 18.7 years and 71 young people referred to mental health services for SH behavior in London between the ages of 11.9 years and 17.5 years completed the RTSHIA along with standardized measures of adolescent psychopathology. Two factors emerged from the principal axis factoring, and RT and SH were further validated by a confirmatory factor analysis as related, but different, constructs, rather than elements of a single continuum. Inter-item and test–retest reliabilities were high for both components (Cronbach's α = .85, rtt = .90; Cronbach's α .93, rtt = .87), and considerable evidence emerged in support of the measure's convergent, concurrent, and divergent validity. The findings are discussed with regard to potential usefulness of the RTSHIA for research and clinical purposes with adolescents.

Neural networks for linear control: an analysis

This paper considers the use of radial basis function and multi-layer perceptron networks for linear or linearizable, adaptive feedback control schemes in a discrete-time environment. A close look is taken at the model structure selected and the extent of the resulting parameterization. A comparison is made with standard, nonneural network algorithms, e.g. self-tuning control.

Self-organising neural networks for adaptive control

Self-organizing neural networks have been implemented in a wide range of application areas such as speech processing, image processing, optimization and robotics. Recent variations to the basic model proposed by the authors enable it to order state space using a subset of the input vector and to apply a local adaptation procedure that does not rely on a predefined test duration limit. Both these variations have been incorporated into a new feature map architecture that forms an integral part of an Hybrid Learning System (HLS) based on a genetic-based classifier system. Problems are represented within HLS as objects characterized by environmental features. Objects controlled by the system have preset targets set against a subset of their features. The system's objective is to achieve these targets by evolving a behavioural repertoire that efficiently explores and exploits the problem environment. Feature maps encode two types of knowledge within HLS — long-term memory traces of useful regularities within the environment and the classifier performance data calibrated against an object's feature states and targets. Self-organization of these networks constitutes non-genetic-based (experience-driven) learning within HLS. This paper presents a description of the HLS architecture and an analysis of the modified feature map implementing associative memory. Initial results are presented that demonstrate the behaviour of the system on a simple control task.

Effects of beverage alcohol taxes and prices on drinking: a meta-analysis of 1003 estimates from 112 studies

Aims: We conducted a systematic review of studies examining relationships between measures of beverage alcohol tax or price levels and alcohol sales or self-reported drinking. A total of 112 studies of alcohol tax or price effects were found, containing 1003 estimates of the tax/price–consumption relationship. Design: Studies included analyses of alternative outcome measures, varying subgroups of the population, several statistical models, and using different units of analysis. Multiple estimates were coded from each study, along with numerous study characteristics. Using reported estimates, standard errors, t-ratios, sample sizes and other statistics, we calculated the partial correlation for the relationship between alcohol price or tax and sales or drinking measures for each major model or subgroup reported within each study. Random-effects models were used to combine studies for inverse variance weighted overall estimates of the magnitude and significance of the relationship between alcohol tax/price and drinking. Findings: Simple means of reported elasticities are -0.46 for beer, -0.69 for wine and -0.80 for spirits. Meta-analytical results document the highly significant relationships (P < 0.001) between alcohol tax or price measures and indices of sales or consumption of alcohol (aggregate-level r = -0.17 for beer, -0.30 for wine, -0.29 for spirits and -0.44 for total alcohol). Price/tax also affects heavy drinking significantly (mean reported elasticity = -0.28, individual-level r = -0.01, P < 0.01), but the magnitude of effect is smaller than effects on overall drinking. Conclusions: A large literature establishes that beverage alcohol prices and taxes are related inversely to drinking. Effects are large compared to other prevention policies and programs. Public policies that raise prices of alcohol are an effective means to reduce drinking.

Application of logistic regression for fault analysis in an industrial printing process

A statistical technique for fault analysis in industrial printing is reported. The method specifically deals with binary data, for which the results of the production process fall into two categories, rejected or accepted. The method is referred to as logistic regression, and is capable of predicting future fault occurrences by the analysis of current measurements from machine parts sensors. Individual analysis of each type of fault can determine which parts of the plant have a significant influence on the occurrence of such faults; it is also possible to infer which measurable process parameters have no significant influence on the generation of these faults. Information derived from the analysis can be helpful in the operator's interpretation of the current state of the plant. Appropriate actions may then be taken to prevent potential faults from occurring. The algorithm is being implemented as part of an applied self-learning expert system.

An anthology of voices: an analysis of trainee drama teacher's monologues

This paper reports on research undertaken into the processes through which student teachers begin to formulate an identity as a professional teacher. Using Fuller’s investigations into the attitudes of trainee teachers towards their courses (1969) as a baseline, a discussion is established on the place of the student voice in contemporary initial teacher training programmes. In order to further investigate the potential importance of affording student teachers the opportunity to reflect on and express their thinking and feeling as they embark on their chosen career path, the concerns of a group of student drama teachers were recorded and interpreted. The vehicle for this exercise involved writing and subsequently performing reflective monologues. These were analysed by using The Listening Guide as composed by Gilligan et al. (2003). This paper illustrates how the methodology revealed distinct yet generally harmonious voices at work in the group in the first few weeks of their training year. Subsequent analysis suggests a model for the initial formation of a teaching identity built on aspects of self, role and character. Recognising the relative values and relationships between these factors for student teachers may, it is argued, provide greater security for them while affording their tutors insights which could help them to re-shape initial teacher training programmes. Keywords: student teachers, teacher training, professional identity, student voice, reflective monologues

Self-assembly studies of a chiral bisurea-based superhydrogelator

A chiral bisurea-based superhydrogelator that is capable of forming supramolecular hydrogels at concentrations as low as 0.2 mm is reported. This soft material has been characterized by thermal studies, rheology, X-ray diffraction analysis, transmission electron microscopy (TEM), and by various spectroscopic techniques (electronic and vibrational circular dichroism and by FTIR and Raman spectroscopy). The expression of chirality on the molecular and supramolecular levels has been studied and a clear amplification of its chirality into the achiral analogue has been observed. Furthermore, thermal analysis showed that the hydroACHTUNGTRENUNGgel- ACHTUNGTRENUNGation of compound 1 has a high response to temperature, which corresponds to an enthalpy-driven self-assembly process. These particular thermal characteristics make these materials easy to handle for soft-application technologies