25 resultados para Limestone outcrops
Resumo:
This paper examines the life cycle GHG emissions from existing UK pulverized coal power plants. The life cycle of the electricity Generation plant includes construction, operation and decommissioning. The operation phase is extended to upstream and downstream processes. Upstream processes include the mining and transport of coal including methane leakage and the production and transport of limestone and ammonia, which are necessary for flue gas clean up. Downstream processes, on the other hand, include waste disposal and the recovery of land used for surface mining. The methodology used is material based process analysis that allows calculation of the total emissions for each process involved. A simple model for predicting the energy and material requirements of the power plant is developed. Preliminary calculations reveal that for a typical UK coal fired plant, the life cycle emissions amount to 990 g CO2-e/kWh of electricity generated, which compares well with previous UK studies. The majority of these emissions result from direct fuel combustion (882 g/kWh 89%) with methane leakage from mining operations accounting for 60% of indirect emissions. In total, mining operations (including methane leakage) account for 67.4% of indirect emissions, while limestone and other material production and transport account for 31.5%. The methodology developed is also applied to a typical IGCC power plant. It is found that IGCC life cycle emissions are 15% less than those from PC power plants. Furthermore, upon investigating the influence of power plant parameters on life cycle emissions, it is determined that, while the effect of changing the load factor is negligible, increasing efficiency from 35% to 38% can reduce emissions by 7.6%. The current study is funded by the UK National Environment Research Council (NERC) and is undertaken as part of the UK Carbon Capture and Storage Consortium (UKCCSC). Future work will investigate the life cycle emissions from other power generation technologies with and without carbon capture and storage. The current paper reveals that it might be possible that, when CCS is employed. the emissions during generation decrease to a level where the emissions from upstream processes (i.e. coal production and transport) become dominant, and so, the life cycle efficiency of the CCS system can be significantly reduced. The location of coal, coal composition and mining method are important in determining the overall impacts. In addition to studying the net emissions from CCS systems, future work will also investigate the feasibility and technoeconomics of these systems as a means of carbon abatement.
Resumo:
Earthworms secrete granules of calcium carbonate. These are potentially important in soil biogeochemical cycles and are routinely recorded in archaeological studies of Quaternary soils. Production rates of calcium carbonate granules by the earthworm Lumbricus terrestris L. were determined over 27 days in a range of soils with differing chemical properties (pH, organic matter content, water holding capacity, bulk composition, cation exchange capacity and exchangeable cations). Production rate varied between soils, lay in the range 0–0.043 mmolCaCO3 (0–4.3 mg) earthworm−1 d−1 with an average rate of 8 × 10−3 mmolCaCO3 (0.8 mg) earthworm−1 d−1 and was significantly correlated (r = 0.68, P ≤ 0.01) with soil pH. In a second experiment lasting 315 days earthworms repeatedly (over periods of 39–57 days) produced comparable masses of granules. Converting individual earthworm granule production rates into fluxes expressed on per hectare of land per year basis depends heavily on estimates of earthworm numbers. Using values of 10–20 L. terrestris m−2 suggests a rate of 18– 3139 molCaCO3 ha−1 yr−1. Data obtained from flow-through dissolution experiments suggest that at near neutral pH, granule geometric surface areanormalised dissolution rates are similar to those for other biogenic and inorganic calcium carbonate. Fits of the data to the dissolution relationship r = k(1 − ˝)n where r = dissolution rate, k = a rate constant, ˝ = relative saturation and n = the reaction order gave values of k = 1.72 × 10−10 mol cm−2 s−1 and n = 1.8 for the geometric surface area-normalised rates and k = 3.51 × 10−13 mol cm−2 s−1 and n = 1.8 for the BET surface area-normalised rates. In 196 day leaching column experiments trends in granule dissolution rate referenced to soil chemistry corresponded to predictions made by the SLIM model for dissolution of limestone in soil. If soil solution approaches saturation with respect to calcium carbonate granule dissolution will slow or even stop and granules be preserved indefinitely. Granules have the potential to be a small but significant component of the biogeochemical cycling of C and Ca in soil.
Resumo:
A fixed dynamical heating model is used to investigate the pattern of zonal-mean stratospheric temperature change resulting from geoengineering with aerosols composed of sulfate, titania, limestone and soot. Aerosol always heats the tropical lower stratosphere, but at the poles the response can be either heating, cooling, or neutral. The sign of the change in stratospheric Pole-Equator temperature difference depends on aerosol type, size and season. This has implications for modelling geoengineering impacts and the response of the stratospheric circulation.
Resumo:
This paper reports the results of fieldwork conducted in the 2010 and 2011 DMP field seasons and of analysis of samples collected during these and previous years. Research has involved 1) studying palaeolake sediment outcrops, 2) using ground penetrating radar (GPR) to determine their extent under the Dahān Ubārī, and 3) coring palaeolakes in order to determine their palaeoenvironmental records. Research on these samples is continuing but some initial findings are discussed in this paper. The most extensive palaeolake sediments are found within the al-Mahruqah Formation and were deposited by a giant lake system that developed in the Fazzān Basin during past humid periods. Stratigraphic analysis of Lake Megafazzān sediments suggests two different sedimentary successions, a lake margin succession distinctive for its lacustrine and palaeosol carbonates, and a clastic-dominated, intensely rootleted, basin-centre succession which has terrestrial intervals (aeolian and palaeosols) as well as in the upper parts lacustrine limestones. Both basin margin and basin centre successions are underlain by fluvial deposits. Magnetostratigraphy suggests that the formation may be as old as the mid-Pliocene. After the Lake Megafazzān phase, smaller palaeolakes developed within the basin during subsequent humid periods. One of the largest is found in the Wādī al-Hayāt in the area between Jarma and Ubārī. Similar deposits further west along the Wādī at progressively higher altitudes are interpreted as small lakes and marshes fed by springs issuing from aquifers at the base of the escarpment, last replenished during the Holocene humid phase. Dating of sediments suggests that this was between c. 11 and c. 8 ka. The Wādī ash-Shāţī palaeolake core also provides a Holocene palaeoclimate record that paints a slightly different picture, indicating lake conditions until around 7 ka, whereupon it started oscillating until around 5.5 ka when sedimentation terminates. The reasons for the differences in these records are discussed.
Resumo:
Export coefficient modelling was used to model the impact of agriculture on nitrogen and phosphorus loading on the surface waters of two contrasting agricultural catchments. The model was originally developed for the Windrush catchment where the highly reactive Jurassic limestone aquifer underlying the catchment is well connected to the surface drainage network, allowing the system to be modelled using uniform export coefficients for each nutrient source in the catchment, regardless of proximity to the surface drainage network. In the Slapton catchment, the hydrological path-ways are dominated by surface and lateral shallow subsurface flow, requiring modification of the export coefficient model to incorporate a distance-decay component in the export coefficients. The modified model was calibrated against observed total nitrogen and total phosphorus loads delivered to Slapton Ley from inflowing streams in its catchment. Sensitivity analysis was conducted to isolate the key controls on nutrient export in the modified model. The model was validated against long-term records of water quality, and was found to be accurate in its predictions and sensitive to both temporal and spatial changes in agricultural practice in the catchment. The model was then used to forecast the potential reduction in nutrient loading on Slapton Ley associated with a range of catchment management strategies. The best practicable environmental option (BPEO) was found to be spatial redistribution of high nutrient export risk sources to areas of the catchment with the greatest intrinsic nutrient retention capacity.
Resumo:
The coupled δ13C-radiocarbon systematics of threeEuropean stalagmites deposited during the Late Glacial and early Holocene were investigated to understand better how the carbon isotope systematics of speleothems respond to climate transitions. The emphasis is on understanding how speleothems may record climate-driven changes in the proportions of biogenic (soil carbon) and limestone bedrock derived carbon. At two of the three sites, the combined δ13C and 14C data argue against greater inputs of limestone carbon as the sole cause of the observed shift to higher δ13C during the cold Younger Dryas. In these stalagmites (GAR-01 from La Garma cave, N. Spain and So-1 from Sofular cave, Turkey), the combined changes in δ13C and initial 14C activities suggest enhanced decomposition of old stored, more recalcitrant, soil carbon at the onset of the warmer early Holocene. Alternative explanations involving gradual temporal changes between open- and closed-system behaviour during the Late Glacial are difficult to reconcile with observed changes in speleothem δ13C and the growth rates. In contrast, a stalagmite from Pindal cave (N. Spain) indicates an abrupt change in carbon inputs linked to local hydrological and disequilibrium isotope fractionation effects, rather than climate change. For the first time, it is shown that while the initial 14C activities of all three stalagmites broadly follow the contemporaneous atmospheric 14C trends (the Younger Dryas atmospheric 14C anomaly can be clearly discerned), subtle changes in speleothem initial 14C activities are linked to climate-driven changes in soil carbon turnover at a climate transition.
Resumo:
A detailed quantitative microstructural study coupled with cathodoluminescence and geochemical analyses on marbles from Naxos demonstrates that the analysis of microstructures is the most sensitive method to define the origin of marbles within, and between, different regions. Microstructure examination can only be used as an accurate provenance tool if a correction for the second-phase content is considered. If second phases are not considered, a large spread of different microstructures occurs within sample sites, making a separation between neighbouring outcrops difficult or impossible. Moreover, this study shows that the origin of a marble is defined more precisely if the microstructural observations are coupled with cathodoluminescence data.
Resumo:
Fourth-century a.d. chalk tesserae from Roman Leicester (Ratae Corieltavorum) yield rich microfossil assemblages that identify a biostratigraphical age of Cretaceous Late Cenomanian to Early Turonian. The nearest chalk outcrops to Leicester lie in Hertfordshire, Lincolnshire, Yorkshire and north Norfolk, indicating that the material for the tesserae must have been sourced remotely and transported to Ratae. Superimposing the Roman road network onto a map of the relevant Chalk Group distribution provides a guide to possible sources. A process of evaluation identifies Baldock in Hertfordshire and Bridlington in Yorkshire as the most likely sources for the Leicester tesserae.
Resumo:
The well-dated section of Cassis-La Bédoule in the South Provencal Basin (southern France) allows for a detailed reconstruction of palaeoenvironmental change during the latest Barremian and Early Aptian. For this study, phosphorus (P) and clay-mineral contents, stable-isotope ratios on carbonate (δ13Ccarb) and organic matter (δ13Corg), and redox-sensitive trace elements (RSTE: V, U, As, Co, and Mo) have been measured in this historical stratotype. The base of the section consists of rudist limestone, which is attributed to the Urgonian platform. The presence of low P and RSTE content, and content of up to 30% kaolinite indicate deposition under oligotrophic and oxic conditions, and the presence of warm, humid climatic conditions on the adjacent continent. The top of the Urgonian succession is marked by a hardground with encrusted brachiopods and bivalves, which is interpreted as a drowning surface. The section continues with a succession of limestone and marl containing the first occurrence of planktonic foraminifera. This interval includes several laminated, organic-rich layers recording RSTE enrichments and high Corg:Ptot ratios. The deposition of these organic-rich layers was associated with oxygen-depleted conditions and a large positive excursion in δ13Corg. During this interval, a negative peak in the δ13Ccarb record is observed, which dates as latest Barremian. This excursion is coeval with negative excursions elsewhere in Tethyan platform and basin settings and is explained by the increased input of light dissolved inorganic carbon by rivers and/or volcanic activity. In this interval, an increase in P content, owing to reworking of nearshore sediments during the transgression, is coupled with a decrease in kaolinite content, which tends to be deposited in more proximal areas. The overlying hemipelagic sediments of the Early Aptian Deshayesites oglanlensis and D. weissi zones indicate rather stable palaeoenvironmental conditions with low P content and stable δ13C records. A change towards marl-dominated beds occurs close to the end of the D. weissi zone. These beds display a long decrease in their δ13Ccarb and δ13Corg records, which lasted until the end of the Deshayesites deshayesi subzone (corresponding to C3 in Menegatti et al., 1998). This is followed by a positive shift during the Roloboceras hambrovi and Deshayesites grandis subzones, which corresponds in time to oceanic anoxic event (OAE) 1a interval. This positive shift is coeval with two increases in the P content. The marly interval equivalent to OAE 1a lacks organic-rich deposits and RSTE enrichments indicating that oxic conditions prevailed in this particular part of the Tethys ocean. The clay mineralogy is dominated by smectite, which is interpreted to reflect trapping of kaolinite on the surrounding platforms rather than indicating a drier climate.
Resumo:
When travelling north-east across the Somerset Levels and Moors the eye is drawn to the dark mass of the Mendip Hills, a Carboniferous Limestone ridge which rises abruptly from the flatness of its surroundings. The Historic Landscape of the Mendip Hills explores the archaeology and architecture of this remarkable corner of England, beginning with evidence for the first hunting groups who passed through the region over half a million years ago. Succeeding generations have left their mark on the Hills, from the enigmatic ceremonial structures of the Neolithic and Early Bronze Age, to the ancient farming landscapes and brooding hillforts of the Later Prehistoric period. Field archaeology, combined with architectural and historical enquiry, has also allowed a complex narrative to be constructed for more recent periods of history. This is a story dominated by adaptation and change, evidenced by the developing architecture of manorial centres and the shadowy remains of earlier structures fossilized within village houses. This volume presents a synthesis of the results of recent fieldwork undertaken by English Heritage and traces this region’s remarkable past, revealing ways in which it has shaped the landscape we see and value today.