Effects of calcium chloride and sodium hexametaphosphate on certain chemical and physical properties of soymilk

Soymilks with sodium hexametaphosphate (SHMP) (0% to 1.2%) and calcium chloride (12.50, 18.75, and 25.00 mM Ca),were analyzed for total Ca, Ca ion concentration, pH, kinematic viscosity, particle diameter, and sediment after pasteurization. Higher added Ca led to significant (P <= 0.05) increases in Ca ion concentration and significant (P <= 0.05) decreases in pH. At certain levels of SHMP, higher concentrations of added Ca significantly increased (P <= 0.05) kinematic viscosity, particle diameter, and sediment. Increasing SHMP concentration reduced Ca ion concentration, particle diameter, and dry sediment content, but reduced kinematic viscosity of samples (P <= 0.05). Adding SHMP up to 0.7% influenced pH of soymilk in different ways, depending on the level of Ca addition. When the pH of Ca-fortified soymilk was adjusted to a higher level, ionic Ca decreased as pH increased. Ihere was a negative linear relationship between the logarithm of ionic Ca concentration and the adjusted pH of the soymilk. Ionic Ca appeared to be a good indicator of thermally induced sediment formation, with little sediment being produced if ionic Ca was maintained below 0.4 mM.

Characterization of protein-polyphenol interactions

Dietary polyphenols have received attention for their biologically significant functions as antioxidants, anticarcinogens or antimutagens, which have led to their recognition as potential nutraceuticals. Polyphenols also characteristically possess a significant binding affinity for proteins, which can lead to the formation of soluble and insoluble protein-polyphenol complexes. Questions remain concerning whether and to what extent the protein-polyphenol interaction influences functionality. For example, is the formation of protein-polyphenol complexes an obstacle to the nutritional bioavailability of either species? This article discusses the development of suitable methodologies to investigate the physicochemical basis of protein-polyphenol interactions and the influence of structure-activity relationships on binding affinities. (C) 2003 Elsevier Ltd. All rights reserved.

Dietary fat composition and cardiovascular disease

Cardiovascular disease (CVD), which includes coronary heart disease and stroke, remains the major killer in the EU, being responsible for 42% of total mortality. The amount and composition of dietary fat is arguably the most important dietary factor contributing to disease risk. A significant body of consistent evidence indicates that a decrease in dietary saturated fat:unsaturated (polyunsaturated + monounsaturated) ratio and an increased intake of long-chain n-3 polyunsaturated fatty acids (LC n-3 PUFA) found in fish, is cardioprotective. Furthermore, although the evidence is currently less convincing, such a strategy is also likely to improve insulin sensitivity, the central metabolic defect in diabetes. Currently in the UK only 12% of men, 17% of women and 8% of children have an SFA intakes <10% of energy. The average intake of LC n-3 PUFA is <0.2 g/day, which is less than half the current conservative recommendation of a minimum of 0.45 g/day. Public health strategies to reverse these dietary fatty acid imbalances, aimed at educating and motivating the consumer and making affordable and acceptable food products with an ‘enhanced’ fatty acid profile more widely available, must remain a public health priority in the ‘fight’ against CVD.

Vacuum-induced bubble formation in liquid-tempered chocolate

Bubble inclusion is one of the fastest growing operations practiced in the food industry. A variety of aerated foods is currently available in supermarkets, and newer products are emerging all the time. This paper aims to combine knowledge on chocolate aeration with studies performed on bubble formation and dispersion characteristics. More specifically, we have investigated bubble formation induced by applying vacuum. Experimental methods to determine gas hold-up (volume fraction of air), bubble section distributions along specific planes, and chocolate rheological properties are presented. This study concludes that decreasing pressures elevate gas hold-up values due to an increase in the number of bubble nuclei being formed and release of a greater volume of dissolved gases. Furthermore, bubbles are observed to be larger at lower pressures for a set amount of gas because the internal pressure needs to be in equilibrium with the surrounding pressures. Temperature-induced changes to the properties of the chocolate have less of an effect on bubble formation. On the other hand, when different fats and emulsifiers are added to a standard chocolate recipe, milk fat was found to increase, significantly, the gas hold-up values and the mean bubble-section diameters. It is hypothesized that this behavior is related to the way milk fats, which contain different fatty acids to cocoa butter, crystallize and influence the setting properties of the final product. It is highlighted that apparent viscosity values at low shear rate, as well as setting behavior, play an important role in terms of bubble formation and entrainment.

Bubble-included chocolate: relating structure with sensory response

Bubbles impart a very unique texture, chew, and mouth feel to foods. However, little is known about the relationship between structure of such products and consumer response in terms of mouth-feel and eating experience. The objective of this article is to investigate the sensory properties of 4 types of bubble-containing chocolates, produced by using different gases: carbon dioxide, nitrogen, nitrous oxide, and argon. The structure of these chocolates were characterized in terms of (1) gas hold-up values determined by density measurements and (2) bubble size distribution which was measured by undertaking an image analysis of X-ray microtomograph sections. Bubble size distributions were obtained by measuring bubble volumes after reconstructing 3D images from the tomographic sections. A sensory study was undertaken by a nonexpert panel of 20 panelists and their responses were analyzed using qualitative descriptive analysis (QDA). The results show that chocolates made from the 4 gases could be divided into 2 groups on the basis of bubble volume and gas hold-up: the samples produced using carbon dioxide and nitrous oxide had a distinctly higher gas hold-up containing larger bubbles in comparison with those produced using argon and nitrogen. The sensory study also demonstrated that chocolates made with the latter were perceived to be harder, less aerated, slow to melt in the mouth, and having overall flavor intensity. These products were further found to be creamier than the chocolates made by using carbon dioxide and nitrous oxide; the latter sample also showed a higher intensity of cocoa flavor.

Dietary-based gut flora modulation against Clostridium difficile onset

Clostridium difficile infection is a frequent complication of antibiotic therapy in hospitalised patients, which today is attracting more attention than ever and has led to its classification as a 'superbug'. Disruption of the composition of the intestinal microflora following antibiotic treatment is an important prerequisite for overgrowth of C. difficile and the subsequent development of an infection. Treatment options for antibiotic-associated diarrhoea and C. difficile-induced colitis include administration of specific antibiotics (e.g. vancomycin), which often leads to high relapse rates. More importantly, both the rate and severity of C. difficile-associated diseases are increasing, with new epidemic strains of C. difficile often implicated. For the prevention and treatment of antibiotic-associated diarrhoea and C. difficile infection, several probiotic bacteria such as selected strains of lactobacilli (especially Lactobacillus rhamnosus GG), Bifidobacterium longum, and Enterococcus faecium and the non-pathogenic yeast Saccharomyces boulardii have been used. Controlled trials indicate a benefit of S. boulardii and L. rhamnosus GG as therapeutic agents when used as adjuncts to antibiotics. However, the need for more well designed controlled trials with probiotics is explicit.

From probiotics to prebiotics and a healthy digestive system

Ingestion of probiotics can be recommended as a preventative approach to maintaining intestinal microflora balance and thereby enhance 'well-being'. Undoubtedly, probiotic bacteria will vary in their efficacy. The literature indicates positive results in over 50 human trials with prevention/treatment of infections the most frequently reported. In theory increased levels of probiotics may induce a 'barrier' influence against common pathogens. Mechanisms of effect are likely to include the excretion of acids (lactate, acetate), competition for nutrients and gut receptor sites, immuno-modulation and the formation of specific antimicrobial agents. An alternative, or additional, approach is the prebiotic concept. This takes the view that probiotics are present indigenous to the gut and that a rational approach towards increasing their numbers would be to consume food ingredients (carbohydrates) that have a selective metabolism in the lower gut. A prebiotic is 'a nondigestible food ingredient that beneficially affects the host by selectively stimulating the growth and/or activity of one or a limited number of bacteria in the colon that can improve the host health.' In particular, the ingestion of fructo-oligosaccharides, galacto-oligosaccharides, and lactulose has shown to stimulate bifidobacteria in the lower gut.

Mechanical properties of oats and oat products

The aim of this review is to illustrate how physical properties are important to food processing and quality. Three food products, flakes, porridge and bread, in addition to oat groats are used to show the influence of water and heat-treatments on the mechanical properties. The hydrothermal history of ingredients is shown to affect product quality. Water acts as a plasticiser and solvent in these foods, whilst heat modifies the conformation and interactions of macromolecular components. Structure as well as chemical composition is shown to govern texture.

The potential role of the intestinal gut microbiota in obesity and the metabolic syndrome

The incidence of obesity has reached alarming levels worldwide, thus increasing the risk of development of metabolic disorders (e.g. type 2 diabetes, coronary heart disease (CHD) and cancer). Among the causes of obesity, diet and lifestyle play a central role. Although the treatment of obesity may appear quite straightforward, by simply re-addressing the balance between energy intake and energy expenditure, practically it has been very challenging. In the search for new therapeutic targets for treatment of obesity and related disorders, the gut microbiota and its activities have been investigated in relation to obesity. The human gut microbiota has already been shown to influence total energy intake and lipid metabolism, particularly through colonic fermentation of undigestible dietary constituents and production of short chain fatty acids (SCFA). Recent studies have highlighted the contribution of the gut microbiota to mammalian metabolism and energy harvested from the diet. A dietary modulation of the gut microbiota and its metabolic output could positively influence host metabolism and, therefore, constitute a potential coadjutant approach in the management of obesity and weight loss.

Studying oil absorption in restructured potato chips

The oil-absorption capacity of different restructured potato chips during deep-fat frying was investigated. Low-leach potato flake was chosen as the major ingredient, whereas native and pregelatinized potato starches were studied as complementary ingredients. Results showed that off absorption increased significantly when reducing product thickness in all products. Interestingly, it was found that the product containing native potato starch as an ingredient picked up the lowest amount of on when sheeted into a thick chip, whereas it absorbed the largest amount of oil when sheeted into a thin chip. Those findings were mainly attributed to crust microstructure development as revealed by electron microscopy and confocal microscopy.