3D scanning by multiple fan beam X-ray sources and sensors

*** Purpose – Computer tomography (CT) for 3D reconstruction entails a huge number of coplanar fan-beam projections for each of a large number of 2D slice images, and excessive radiation intensities and dosages. For some applications its rate of throughput is also inadequate. A technique for overcoming these limitations is outlined. *** Design methodology/approach – A novel method to reconstruct 3D surface models of objects is presented, using, typically, ten, 2D projective images. These images are generated by relative motion between this set of objects and a set of ten fanbeam X-ray sources and sensors, with their viewing axes suitably distributed in 2D angular space. *** Findings – The method entails a radiation dosage several orders of magnitude lower than CT, and requires far less computational power. Experimental results are given to illustrate the capability of the technique *** Practical implications – The substantially lower cost of the method and, more particularly, its dramatically lower irradiation make it relevant to many applications precluded by current techniques *** Originality/value – The method can be used in many applications such as aircraft hold-luggage screening, 3D industrial modelling and measurement, and it should also have important applications to medical diagnosis and surgery.

Suppression of directional interference for STBC MIMO system based on beam-forming

In civil applications, many researches on MIMO technique have achieved great progress. However, we consider military applications here. Differing from civil applications, military MIMO system may face many kinds of interferences, and the interference source may even not be equipped with multiple antennas. So the military MIMO system may receive some kind of strong interference coming from certain direction. Therefore, the military MIMO system must have capability to suppress directional interference. This paper presents a scheme to suppress directional interference for STBC MIMO system based on beam-forming. Simulation result shows that the scheme is valid to suppress directional strong interference for STBC MIMO system although with some performance loss compared with the ideal case of non-interference.

Simple model of adsorption on external surface of carbon nanotubes: a new analytical approach basing on molecular simulation data

Nitrogen adsorption on carbon nanotubes is wide- ly studied because nitrogen adsorption isotherm measurement is a standard method applied for porosity characterization. A further reason is that carbon nanotubes are potential adsorbents for separation of nitrogen from oxygen in air. The study presented here describes the results of GCMC simulations of nitrogen (three site model) adsorption on single and multi walled closed nanotubes. The results obtained are described by a new adsorption isotherm model proposed in this study. The model can be treated as the tube analogue of the GAB isotherm taking into account the lateral adsorbate-adsorbate interactions. We show that the model describes the simulated data satisfactorily. Next this new approach is applied for a description of experimental data measured on different commercially available (and characterized using HRTEM) carbon nanotubes. We show that generally a quite good fit is observed and therefore it is suggested that the observed mechanism of adsorption in the studied materials is mainly determined by adsorption on tubes separated at large distances, so the tubes behave almost independently.

Researching from within: external and internal ethical engagement

This article examines the superficial and deep ethical and moral dilemmas confronting ‘insider’ researchers which we term external and internal ethical engagement. External ethical engagement refers to the traditional, easily identifiable ethical issues that insider researchers attend to by submitting their application for ethical approval to their institution’s internal review board. Internal ethical engagement relates to the deeper level ethical and moral dilemmas that insider researchers have to deal with once ‘in the field’ linked to on-going personal and professional relationships with participants, insider knowledge, conflicting professional and researcher roles, and anonymity. By reviewing the literature in this area and drawing on the authors’ experiences of undertaking interpretive studies at institutions where they were members of staff, we explore these concepts and examine the implications for insider researchers. Keywords: insider research; ethics; professional relationships; anonymity; access

Differential effects of internal and external factors on the development of vocabulary, tense morphology and morpho-syntax in successive bilingual children

The present study investigates the effects of child internal (age/time) and child external/environmental factors on the development of a wide range of language domains in successive bilingual (L2) Turkish-English children of homogeneously low SES. Forty-three L2 children were tested on standardized assessments examining the acquisition of vocabulary and morpho-syntax. The L2 children exhibited a differential acquisition of the various domains: they were better on the general comprehension of grammar and tense morphology and less accurate on the acquisition of vocabulary and (complex) morpho-syntax. Profile effects were confirmed by the differential effects of internal and external factors on the language domains. The development of vocabulary and complex syntax were affected by internal and external factors, whereas external factors had no contribution to the development of tense morphology. These results are discussed in light of previous studies on the impact of internal and external factors in child L2 acquisition.

Review of the formulation of present‐generation stratospheric chemistry‐climate models and associated external forcings

The goal of the Chemistry‐Climate Model Validation (CCMVal) activity is to improve understanding of chemistry‐climate models (CCMs) through process‐oriented evaluation and to provide reliable projections of stratospheric ozone and its impact on climate. An appreciation of the details of model formulations is essential for understanding how models respond to the changing external forcings of greenhouse gases and ozonedepleting substances, and hence for understanding the ozone and climate forecasts produced by the models participating in this activity. Here we introduce and review the models used for the second round (CCMVal‐2) of this intercomparison, regarding the implementation of chemical, transport, radiative, and dynamical processes in these models. In particular, we review the advantages and problems associated with approaches used to model processes of relevance to stratospheric dynamics and chemistry. Furthermore, we state the definitions of the reference simulations performed, and describe the forcing data used in these simulations. We identify some developments in chemistry‐climate modeling that make models more physically based or more comprehensive, including the introduction of an interactive ocean, online photolysis, troposphere‐stratosphere chemistry, and non‐orographic gravity‐wave deposition as linked to tropospheric convection. The relatively new developments indicate that stratospheric CCM modeling is becoming more consistent with our physically based understanding of the atmosphere.

Satanic Mills? An illustration of Victorian external environmental accounting

The paper evaluates a Victorian environmental account of the pollution of the River Wandle. This account was produced during a period of social and environmental crisis, when there were no significant industrial environmental regulations. This problematising external environmental account provides valuable insights into the historical development of social and environmental accounting. Our analysis located this account within an institutional reform programme to create systems of governance to mitigate the damage arising from unfettered industrial growth. We argue that problematising external environmental accounting has a longer tradition than previously recognised in the literature and predates corporate social and environmental reporting.

An assessment of a three-beam Doppler lidar wind profiling method for use in urban areas

Currently there are few observations of the urban wind field at heights other than rooftop level. Remote sensing instruments such as Doppler lidars provide wind speed data at many heights, which would be useful in determining wind loadings of tall buildings, and predicting local air quality. Studies comparing remote sensing with traditional anemometers carried out in flat, homogeneous terrain often use scan patterns which take several minutes. In an urban context the flow changes quickly in space and time, so faster scans are required to ensure little change in the flow over the scan period. We compare 3993 h of wind speed data collected using a three-beam Doppler lidar wind profiling method with data from a sonic anemometer (190 m). Both instruments are located in central London, UK; a highly built-up area. Based on wind profile measurements every 2 min, the uncertainty in the hourly mean wind speed due to the sampling frequency is 0.05–0.11 m s−1. The lidar tended to overestimate the wind speed by ≈0.5 m s−1 for wind speeds below 20 m s−1. Accuracy may be improved by increasing the scanning frequency of the lidar. This method is considered suitable for use in urban areas.

Effect of disease-selective predation on prey infected by contact and external sources

We propose and analyze a simple mathematical model for susceptible prey (S)–infected prey (I)–predator (P) interaction, where the susceptible prey population (S) is infected directly from external sources as well as through contact with infected class (I) and the predator completely avoids consuming the infected prey. The model is analyzed to obtain different thresholds of the key parameters under which the system exhibits stability around the biologically feasible equilibria. Through numerical simulations we display the effects of external infection and the infection through contact on the system dynamics in the absence as well as in the presence of the predator. We compare the system dynamics when infection occurs only through contact, with that when it occurs through contact and external sources. Our analysis demonstrates that under a disease-selective predation, stability and oscillations of the system is determined by two key parameters: the external infection rate and the force of infection through contact. Due to the introduction of external infection, the predator and the prey population show limit-cycle oscillations over a range parametric values. We suggest that while predicting the dynamics of such an eco-epidemiological system, the modes of infection and the infection rates might be carefully investigated.

Whistle-blowing by external auditors: seeking legitimacy for the South African audit profession?

Auditing is often cited as playing an important role in managing agency-related costs and, accordingly, being integral to the sound functioning of capital markets. There may, however, be more to the attest function than a technical rational practice. By virtue of relying heavily on claims to technical expertise, professionalism, prudential judgement and public confidence, auditing is both a source of legitimacy for organisations and, paradoxically, dependent on claims to legitimacy for its continued existence. From this perspective, recent regulatory developments, purportedly enacted to increase arms-length control over the profession, may not only be about improving perceived audit quality and practice but also about ensuring continued faith in the well-established ‘rituals’ of the assurance function. A reporting duty imposed on South African external auditors, akin to whistle-blowing, is used as a case study to explore this perspective. In doing so, this paper contributes to the scant body of interpretive research on auditing, simultaneously offering one of the first insights into auditing regulation from an African perspective.

Employees' external representation of their workplace: key antecedents

Drawing on attitude theory, this study investigates the drivers of employees' expression of favorable opinions about their workplace. Despite its theoretical and managerial importance, the marketing literature largely ignores the topic. This study advances prior research by developing, and empirically testing, a conceptual framework of the relationship between workgroup support and favorable external representation of the workplace, mediated by emotional responses to this support. The present research investigates four new relationships: between workgroup support and emotional exhaustion, workgroup support and organizational commitment, workgroup support and job satisfaction, and emotional exhaustion and external representation of the workplace. Based on a sample of over 700 frontline service employees, this study finds that workgroup support affects favorable external representation of the workplace through various emotional responses (i.e., emotional exhaustion, organizational commitment and job satisfaction). In addition, the results identify employees' organizational commitment as the most important determinant of favorable external representation of the workplace, followed by job satisfaction and reduced emotional exhaustion. These results suggest that companies should develop practices that encourage workgroup support and organizational commitment to achieve favorable external representation of the workplace.