How to save a bad element with weak boundary conditions

The P-1-P-1 finite element pair is known to allow the existence of spurious pressure (surface elevation) modes for the shallow water equations and to be unstable for mixed formulations. We show that this behavior is strongly influenced by the strong or the weak enforcement of the impermeability boundary conditions. A numerical analysis of the Stommel model is performed for both P-1-P-1 and P-1(NC)-P-1 mixed formulations. Steady and transient test cases are considered. We observe that the P-1-P-1 element exhibits stable discrete solutions with weak boundary conditions or with fully unstructured meshes. (c) 2005 Elsevier Ltd. All rights reserved.

Bending, twisting, and breaking CuCN chains to produce framework materials: the reactions of CuCN with alkali-metal halides

The reactions of the low-temperature polymorph of copper(I) cyanide (LT-CuCN) with concentrated aqueous alkali-metal halide solutions have been investigated. At room temperature, KX (X = Br and I) and CsX (X = Cl, Br, and I) produce the addition products K[Cu-2(CN)(2)Br](H2O)-H-. (I), K-3[Cu-6(CN)(6)I-3](.)2H(2)O (II), Cs[Cu-3(CN)(3)Cl] (III), Cs[Cu-3(CN)(3)Br] (IV), and Cs-2[Cu-4(CN)(4)I-2](H2O)-H-. (V), with 3-D frameworks in which the -(CuCN)- chains present in CuCN persist. No reaction occurs, however, with NaX (X = Cl, Br, I) or KCl. The addition compounds, I-V, reconvert to CuCN when washed. Both low- and high-temperature polymorphs of CuCN (LT- and HT-CuCN) are produced, except in the case of Cs[Cu-3(CN)(3)Cl] (III), which converts only to LT-CuCN. Heating similar AX-CuCN reaction mixtures under hydrothermal conditions at 453 K for 1 day produces single crystals of I-V suitable for structure determination. Under these more forcing conditions, reactions also occur with NaX (X = Cl, Br, I) and KCl. NaBr and KCl cause some conversion of LT-CuCN into HT-CuCN, while NaCl and NaI, respectively, react to form the mixed-valence Cu(I)/Cu(II) compounds [Cu-II(OH2)(4)][Cu-4(I)(CN)(6)], a known phase, and [Cu-II(OH2)(4)][Cu-4(I)(CN)(4)I-2] (VI), a 3-D framework, which contains infinite -(CuCN)- chains. After 3 days of heating under hydrothermal conditions, the reaction between KI and CuCN produces [Cu-II(OH2)(4)][Cu-2(I)(CN)I-2](2) (VII), in which the CuCN chains are broken into single Cu-CN-Cu units, which in turn are linked into chains via iodine atoms and then into layers via long Cu-C and Cu-Cu interactions.

Design of a turn-linker-turn foldamer by incorporating meta-amino benzoic acid in the middle of a helix forming hexapeptide sequence: A helix breaking approach

Single crystal X-ray diffraction studies reveal that the incorporation of meta-amino benzoic acid in the middle of a helix forming hexapeptide sequence such as in peptide I Boc-Ile(1)-Aib(2)-Val(3)-m-ABA(4)-Ile(5)-Aib(6)-Leu(7)-OMe (Aib: alpha-amino isobutyric acid: m-ABA: meta-amino benzoic acid) breaks the helix propagation to produce a turn-linker-turn (T-L-T) foldamer in the solid state. In the crystalline state two conformational isomers of peptide I self-assemble in antiparallel fashion through intermolecular hydrogen bonds and aromatic pi-pi interactions to form a molecular duplex. The duplexes are further interconnected through intermolecular hydrogen bonds to form a layer of peptides. The layers are stacked one on top of the other through van der Waals interactions to form hydrophilic channels filled with solvent methanol. (C) 2009 Elsevier B.V. All rights reserved.

Construction of Helical Nanofibers from Self-Assembling Pseudopeptide Building Blocks: Modulating the Handedness and Breaking the Helicity

Helical nanofibers are successfully constructed from suitable self-assembling pseudopeptide-based molecular building blocks. The handedness of these nanofibers can be reversed by using mirror-imaged pseudopeptide-based building blocks. Straight nanofibers are also constructed by modulating the molecular and supramolecular structures by the proper choice of the stereochemical nature of the molecular scaffolds. This study demonstrates that molecular structure and chirality are not the only determining factors for tuning the morphology and chirality of nanostructures; the nature of the supramolecular structures formed from the corresponding molecular scaffolds also plays a key role in dictating the shape and chirality of nanostructures. Helical nanofibers are suitable templates for fabricating dipeptide-capped gold nanoparticles, indicating a possible use of these nanofibers in the construction of arrays of gold nanoparticles.

Metallo-organic domino reactions: C-H versus C-C bond breaking

HL and MeL are prepared by condensing benzil dihydrazone with 2-formylpyridine and 2-acetylpyridine, respectively, in 1:2 molar proportions. While in a reaction with [Ru-(C6H6)Cl-2](2), HL yields the cation [Ru(C6H6){5,6-diphenyl-3-(pyridin-2-yl)- 1,2,4-triazine}Cl](+), MeL gives the cation [Ru(C6H6)(MeL)Cl](+). Both the cations are isolated as their hexafluorophosphate salts and characterised by X-ray crystallography. In the case of HL, double domino electrocyclic/elimination reactions are found to occur. The electrocyclic reaction occurs in a C=N-N=C-C=N fragment of HL and the elimination reaction involves breaking of a C-H bond of HL. Density functional calculations on model complexes indicate that the identified electrocyclic reaction is thermochemically as well as kinetically feasible for both HL and MeL in the gas phase. For a double domino reaction, similar to that operative in HL, to occur for MeL, breaking of a C-C bond would be required in the elimination step. Our model calculations show the energy barrier for this elimination step to be much higher (329.1 kJ mol(-1)) for MeL than that for HL (96.3 kJ mol(-1)). Thus, the domino reaction takes place for HL and not for MeL. This accounts for the observed stability of [Ru(C6H6)-(MeL)Cl](+) under the reaction conditions employed.

Milk and meat in our diet: good or bad for health?

Foods derived from animals are an important source of nutrients in the diet but there is considerable uncertainty about whether or not these foods contribute to increased risk of various chronic diseases. For milk in particular there appears to be an enormous mismatch between both the advice given on milk/dairy foods items by various authorities and public perceptions of harm from the consumption of milk and dairy products, and the evidence from long-term prospective cohort studies. Such studies provide convincing evidence that increased consumption of milk can lead to reductions in the risk of vascular disease and possibly some cancers and of an overall survival advantage from the consumption of milk, although the relative effect of milk products is unclear. Accordingly, simply reducing milk consumption in order to reduce saturated fatty acid (SFA) intake is not likely to produce benefits overall though the production of dairy products with reduced SFA contents is likely to be helpful. For red meat there is no evidence of increased risk of vascular diseases though processed meat appears to increase the risk substantially. There is still conflicting and inconsistent evidence on the relationship between consumption of red meat and the development of colorectal cancer, but this topic should not be ignored. Likewise, the role of poultry meat and its products as sources of dietary fat and fatty acids is not fully clear. There is concern about the likely increase in the prevalence of dementia but there are few data on the possible benefits or risks from milk and meat consumption. The future role of animal nutrition in creating foods closer to the optimum composition for long-term human health will be increasingly important. Overall, the case for increased milk consumption seems convincing, although the case for high-fat dairy products and red meat is not. Processed meat products do seem to have negative effects on long-term health and although more research is required, these effects do need to be put into the context of other risk factors to long-term health such as obesity, smoking and alcohol consumption.

Construction of supramolecular helices and breaking the helicity by forming supramolecular β-sheet structures using suitable self-assembling pseudopeptide building blocks

Bis-valine derivatives or malonamide (Guha,S.; Drew, M.G.B. Small 2008, 4, 1993-2005) and a bis-valine derivative of 1,1-cyclopropone dicarboxamide were used as building blocks for the construction of supramolecular helical structures. The six-membered intramolecular hydrogen-bonded scaffold is formed, and this acts as a unique supramolecular synthon for the construction of a pseudopeptide-based supramolecular helical structure. However, in absence of this intramolecular hydrogen bond. intermolecular hydrogen bonds are formed among the peptide strands. This leads to a supramolecular beta-sheet structure. Proper selection of the supramolecular synthon (six-membered intramolecular hydrogenbonded scaffold) promotes supramolecular helix formation, and a deviation from this molecular structure dictates the disruption of supramolecular helicity. In this study, six crystal structures have been used to demonstrate that a change in the central angle and/or the central core structure of dicarboxamides can be used to design either a supramolecular helix or a beta-sheet.