Interpretation of ambiguity: differences between children and adolescents with and without an anxiety disorder

Background: Theory and treatment of anxiety disorders in young people are commonly based on the premise that interpretation biases found in anxious adults are also found in children and adolescents. Although there is some evidence that this may be the case, studies have not typically taken age into account, which is surprising given the normative changes in cognition that occur throughout childhood. The aim of the current study was to identify whether associations between anxiety disorder status and interpretation biases differed in children and adolescents. Methods: The responses of children (7-10 years) and adolescents (13-16 years) with and without anxiety disorders (n = 120) were compared on an ambiguous scenarios task. Results: Children and adolescents with an anxiety disorder showed significantly higher levels of threat interpretation and avoidant strategies than non-anxious children and adolescents. However, age significantly moderated the effect of anxiety disorder status on interpretation of ambiguity, in that adolescents with anxiety disorders showed significantly higher levels of threat interpretation and associated negative emotion than non-anxious adolescents, but a similar relationship was not observed among children. Conclusions: The findings suggest that theoretical accounts of interpretation biases in anxiety disorders in children and adolescents should distinguish between different developmental periods. For both ages, treatment that targets behavioral avoidance appears warranted. However, while adolescents are likely to benefit from treatment that addresses interpretation biases, there may be limited benefit for children under the age of ten.

Origin and structure of Devensian depressions at Letton, Herefordshire

Groups of circular to oval enclosed depressions in soft sediments of Pleistocene age are relatively common in north-west Europe. These features are normally interpreted as being either glacial or periglacial in origin. Where these features are developed in glacial sediments, a glacial (and specifically ‘kettle hole’) genesis is considered most likely. Some groups of features, however, have been re-interpreted as being periglacial in origin and are thought to be the remains of cryogenic mounds (former pingos or palsas/lithalsas). The problem at many sites, of course, is correct identification and previously this was often resolved through extensive trenching of the sediments. The use of geophysics in the form of electrical resistivity tomography and ground probing radar, however, can aid investigation and interpretation and is less invasive. A group of enclosed depressions in the Letton area of Herefordshire within the Last Glacial Maximum ice limit (Late Devensian) have been investigated in this way. The morphology and internal structure of the features and their existence in glaciolacustrine sediments of Late Devensian age strongly suggests that these depressions are kettle holes resulting from ice block discharge into a shallow lakes or lakes, and hence a glacial origin is supported. The lack of any ramparts surrounding the depressions (at the surface or any evidence of these at depth) and the fact that they do not overlap (‘mutually interfere’) indicates that they are not the remains of cryogenic mounds.

Genotypic and phenotypic diversity of a baculovirus population within an individual insect host

It is becoming increasingly apparent that many pathogen populations, including those of insects, show high levels of genotypic variation. Baculoviruses are known to be highly variable, with isolates collected from the same species in different geographical locations frequently showing genetic variation and differences in their biology. More recent Studies at smaller scales have also shown that virus DNA profiles from individual larvae can show polymorphisms within and between populations of the same species. Here, we investigate the genotypic and phenotypic variation of an insect baculovirus infection within a single insect host. Twenty four genotypically distinct nucleopolyhedrovirus (NPV) variants were isolated from an individual pine beauty moth, Panolis flammea, caterpillar by in vivo cloning techniques. No variant appeared to be dominant in the population. The Pafl NPV variants have been mapped using three restriction endonucleases and shown to contain three hypervariable regions containing insertions of 70-750 bp. Comparison of seven of these variants in an alternative host, Mamestra brassicae, demonstrated that the variants differed significantly in both pathogenicity and speed of kill. The generation and maintenance of pathogen heterogeneity are discussed. (c) 2005 Elsevier Inc. All rights reserved.

Green tea (Camellia sinensis) catechins and vascular function

The health benefits of green tea (Camellia sinensis) catechins are becoming increasingly recognised. Amongst the proposed benefits are the maintenance of endothelial function and vascular homeostasis and an associated reduction in atherogenesis and CVD risk. The mounting evidence for the influential effect of green tea catechins on vascular function from epidemiological, human intervention and animal studies is subject to review together with exploration of the potential mechanistic pathways involved. Epigallocatechin-3-gallate, one of the most abundant and widely studied catechin found in green tea, will be prominent in the present review. Since there is a substantial inconsistency in the published data with regards to the impact of green tea catechins on vascular function, evaluation and interpretation of the inter- and intra-study variability is included. In conclusion, a positive effect of green tea catechins on vascular function is becoming apparent. Further studies in animal and cell models using physiological concentrations of catechins and their metabolites are warranted in order to gain some insight into the physiology and molecular basis of the observed beneficial effects.

Shakespeare and Islam

This special issue conceives of “Shakespeare and Islam” in its broadest sense, conceptually, and opens up the conjunction to consideration of both the early modern and more recent periods. It is not directly concerned with addressing doctrinal questions: “Islam” is a flag of convenience for our purposes, an umbrella term that takes in not only the Ottoman Empire but also the Persian (a subject that, perhaps unsurprisingly, tends to be overshadowed by its stronger neighbour), and extends to a discussion of twentieth- and twenty-first-century issues of Shakespearean interpretation. In line with this journal's principal remit, the essays concentrate on questions of staging and interpretation, adaptation and appropriation, thus drawing on and contributing to one of the dominant fields of Shakespeare studies today. While the early modern period remains the collection's central interest, two concluding essays remind us (if we need reminding) that the seemingly endless recycling and reinterpretation of Shakespeare have implications for how we understand the conjunction with Islam today.

Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.

The effects of information presentation on real estate market perceptions

The study seeks to identify systematic differences in perception of the real estate market caused by the frames through which people obtain market information. We operationalise the frames through manipulation of data presentation in a commercial real estate market report, selectively controlling time scale, proportionality distortion and negative value presentation. Our findings suggest that such differences are real and their effects should be taken into account in the design and interpretation of market reports.

REDD+ and community-controlled forests in low-income countries: any hope for a linkage?

Deforestation and forest degradation are estimated to account for between 12% and 20% of annual greenhouse gas emissions and in the 1990s (largely in the developing world) released about 5.8 Gt per year, which was bigger than all forms of transport combined. The idea behind REDD + is that payments for sequestering carbon can tip the economic balance away from loss of forests and in the process yield climate benefits. Recent analysis has suggested that developing country carbon sequestration can effectively compete with other climate investments as part of a cost effective climate policy. This paper focuses on opportunities and complications associated with bringing community-controlled forests into REDD +. About 25% of developing country forests are community controlled and therefore it is difficult to envision a successful REDD + without coming to terms with community controlled forests. It is widely agreed that REDD + offers opportunities to bring value to developing country forests, but there are also concerns driven by worries related to insecure and poorly defined community forest tenure, informed by often long histories of government unwillingness to meaningfully devolve to communities. Further, communities are complicated systems and it is therefore also of concern that REDD + could destabilize existing well-functioning community forestry systems.