Evaluating the structure and magnitude of the ash plume during the initial phase of the 2010 Eyjafjallajökull eruption using lidar observations and NAME simulations

The Eyjafjallajökull volcano in Iceland erupted explosively on 14 April 2010, emitting a plume of ash into the atmosphere. The ash was transported from Iceland toward Europe where mostly cloud-free skies allowed ground-based lidars at Chilbolton in England and Leipzig in Germany to estimate the mass concentration in the ash cloud as it passed overhead. The UK Met Office's Numerical Atmospheric-dispersion Modeling Environment (NAME) has been used to simulate the evolution of the ash cloud from the Eyjafjallajökull volcano during the initial phase of the ash emissions, 14–16 April 2010. NAME captures the timing and sloped structure of the ash layer observed over Leipzig, close to the central axis of the ash cloud. Relatively small errors in the ash cloud position, probably caused by the cumulative effect of errors in the driving meteorology en route, result in a timing error at distances far from the central axis of the ash cloud. Taking the timing error into account, NAME is able to capture the sloped ash layer over the UK. Comparison of the lidar observations and NAME simulations has allowed an estimation of the plume height time series to be made. It is necessary to include in the model input the large variations in plume height in order to accurately predict the ash cloud structure at long range. Quantitative comparison with the mass concentrations at Leipzig and Chilbolton suggest that around 3% of the total emitted mass is transported as far as these sites by small (<100 μm diameter) ash particles.

A framework for revitalisation of rural education and training systems in sub-Saharan Africa: Strengthening the human resource base for food security and sustainable livelihoods

Recent studies of the current state of rural education and training (RET) systems in sub-Saharan Africa have assessed their ability to provide for the learning needs essential for more knowledgeable and productive small-scale rural households. These are most necessary if the endemic causes of rural poverty (poor nutrition, lack of sustainable livelihoods, etc.) are to be overcome. A brief historical background and analysis of the major current constraints to improvement in the sector are discussed. Paramount among those factors leading to its present 'malaise' is the lack of a whole-systems perspective and the absence of any coherent policy framework in most countries. There is evidence of some recent innovations, both in the public sector and through the work of non-governmental organisations (NGOs), civil society organisations (CSOs) and other private bodies. These provide hope of a new sense of direction that could lead towards meaningful 'revitalisation' of the sector. A suggested framework offers 10 key steps which, it is argued, could largely be achieved with modest internal resources and very little external support, provided that the necessary leadership and managerial capacities are in place. (C) 2006 Elsevier Ltd. All rights reserved.

Analysis of molecular determinants of affinity and relative efficacy of a series of R- and S-2-(dipropylamino)tetralins at the 5-HT1A serotonin receptor

1 Factors influencing agonist affinity and relative efficacy have been studied for the 5-HT1A serotonin receptor using membranes of CHO cells expressing the human form of the receptor and a series of R-and S-2-(dipropylamino)tetralins (nonhydroxylated and monohydroxylated (5-OH, 6-OH, 7-OH, 8-OH) species). 2 Ligand binding studies were used to determine dissociation constants for agonist binding to the 5HT(1A) receptor: (a) K-i values for agonists were determined in competition versus the binding of the agonist [H-3]-8-OH DPAT. Competition data were all fitted best by a one-binding site model. (b) K-i values for agonists were also determined in competition versus the binding of the antagonist [H-3]-NAD-199. Competition data were all fitted best by a two-binding site model, and agonist affinities for the higher (K-h) and lower affinity (K-1) sites were determined. 3 The ability of the agonists to activate the 5-HT1A receptor was determined using stimulation of [S-35]-GTPgammaS binding. Maximal effects of agonists (E-max) and their potencies (EC50) were determined from concentration/response curves for stimulation of [S-35]-GTPgammaS binding. 4 K-1/K-h determined from ligand binding assays correlated with the relative efficacy (relative Em) of agonists determined in [S-35]-GTPgammaS binding assays. There was also a correlation between K-1/K-h and K-1/EC50 for agonists determined from ligand binding and [S-35]-GTPgammaS binding assays. 5 Simulations of agonist binding and effect data were performed using the Ternary Complex Model in order to assess the use of K-1/K-h for predicting the relative efficacy of agonists. British Journal of Pharmacology (2003) 138, 1129-1139. doi: 10. 1038/sj.bjp.705085.

Ordering on multiple lengthscales in a series of side group liquid crystal block copolymers containing a cholesteryl-based mesogen

Hierarchical ordering in a side group liquid crystal block copolymer is investigated by differential scanning calorimetry, polarized optical microscopy, small-angle X-ray and neutron scattering (SAXS and SANS) and transmission electron microscopy (TEM). A series of block copolymers with a range of compositions was prepared by atom transfer radical polymerization, comprising a polystyrene block and a poly(methyl methacrylate) block bearing chiral cholesteryl mesogens. Smectic ordering is observed as well as microphase separation of the block copolymer. Lamellar structures were observed for far larger volume fractions than for coil-coil copolymers (up to a volume fraction of liquid crystal block, f(LC) = 0.8). A sample with f(LC) = 0.86 exhibited a hexagonal-packed cylinder morphology, as confirmed by SAXS and TEM. The matrix comprised the liquid crystal block, with the mesogens forming smectic layers. For the liquid crystal homopolymer and samples with high f(LC), a smectic-smectic phase transition was observed below the clearing point. At low temperature, the smectic phase comprises coexisting domains with monolayer S-A,S-1 coexisting with interdigitated S-A,S-d domains. At high temperature a SA,1 phase is observed. This is the only structure observed for samples with lower f(LC). These unprecedented results point to the influence of block copolymer microphase separation on the smectic ordering.

Understanding construction competitiveness: the initial results of a Delphi survey in Finland, Sweden and the UK

The competitiveness of the construction industry is an important issue for many countries as the industry makes up a substantial part of their GDP – about 8% in the UK. A number of competitiveness studies have been undertaken at company, industry and national levels. However, there has been little focus on sustainable competitiveness and the many factors that are involved. This paper addresses that need by investigating what construction industry experts consider to be the most important factors of construction industry competitiveness. It does so by conducting a Delphi survey among industry experts in Finland, Sweden and the UK. A list of 158 factors was compiled from competitiveness reports by institutions such as World Economic Forum and International Institute of Management Development, as well as from explorative workshops in the countries involved in the study. For each of the countries, experts with different perspectives of the industry, including, consultants, contractors and clients, were asked to select their 30 most influential factors. They then ranked their chosen factors in order of importance for the competitiveness of their construction industry. The findings after the first round of the Delphi process underline the complexity of the term competitiveness and the wide range of factors that are considered important contributors to competitiveness. The results also indicate that what are considered to be the most important factors of competitiveness is likely to differ from one country to another.

A new theory of educational change - punctuated equilibrium: the case of the internationalisation of Higher Education institutions

This article argues for a new theoretical paradigm for the analysis of change in educational institutions that is able to deal with such issues as readiness for change, transformational change and the failure of change strategies. Punctuated equilibrium (Tushman and Romanelli, 1985) is a theory which has wide application. It envisages long-term change as being made up of a succession of long periods of relative stability interspersed by brief periods of rapid profound change. In the periods of stability only relatively small incremental changes are possible. The periods of transformational change may be triggered by external or internal influences. A recent study of the long-term process of internationalisation in higher education institutions shows evidence to support the theory: long periods of incremental change, events precipitating profound change and the failure of externally imposed attempts to change. Also, as the theory predicts, changes in collegial organisations are slower and more uncertain than changes in managed organisations.

The synthesis and cytotoxic evaluation of a series of benzodioxole substituted titanocenes

Using 6-benzo[1,3]dioxolefulvene (1a), a series of benzodioxole substituted titanocenes was synthesized. The benzyl-substituted titanocene bis[(benzo[1,3]dioxole)-5-methylcyclopentadienyl] titanium (IV) dichloride (2a) was synthesized from the reaction of Super Hydride with 1a. An X-ray determined crystal structure was obtained for 2a. The ansa-titanocene (1,2-di(cyclopentadienyl)1,2-di-(benzo[1,3]dioxole)-ethanediyl) titanium(IV) dichloride (2b) was synthesized by reductive dimerisation of la with titanium dichloride. The diarylmethyl substituted titanocene bis(di(benzo[1,3]dioxole)-S-methylcyclopentadienyl) titanium(IV) dichloride (20 was synthesized by reacting la with the para-lithiated benzodioxole followed by transmetallation with titanium tetrachloride. When titanocenes 2a-c were tested against pig kidney (LLC-PK) cells inhibitory concentrations (IC50) of 2.8 X 10(-4), 1.6 x 10(-4) and 7.6 x 10(-5) m, respectively, were observed. These values represent improved cytotoxicity against LLC-PK, when compared with unsubstituted titanocene dichloride, but are not as impressive as values obtained for titanocenes previously synthesized using the above methods. Copyright (c) 2006 John Wiley & Sons, Ltd.