Synthesis, crystal structure and magnetic properties of three unprecedented tri-nuclear and one very rare tetra-nuclear copper(II) Schiff-base complexes supported by mixed azido/phenoxo/nitrato or acetato bridges

Three novel mixed bridged trinuclear and one tetranuclear copper(II) complexes of tridentate NNO donor Schiff base ligands [Cu-3(L-1)(2)(mu(LI)-N-3)(2)(CH3OH)(2)(BF2)(2)] (1), [Cu-3(L-1)(2)(mu(LI)-NO3-I kappa O.2 kappa O')(2)] (2), [Cu-3(L-2)(2)(mu(LI)-N-3)(2)(mu-NOI-I kappa O 2 kappa O')(2)] (3) and [Cu-4(L-3)(2)(mu(LI)-N-3)(4)(mu-CH3COO-I kappa O 2 kappa O')(2)] (4) have been synthesized by reaction of the respective tridentate ligands (L-1 = 2[1-(2-dimethylamino-ethylimino)-ethyl]-phenol, L-2 = 2[1-(2-diethylamino-ethylimino)-ethyl]-phenol, L-3 = 2-[1-(2-dimethylamino-ethylimino)-methyl]-phenol) with the corresponding copper(II) salts in the presence of NaN3 The complexes are characterized by single-crystal X-ray diffraction analyses and variable-temperature magnetic measurements Complex 1 is composed of two terminal [Cu(L-1)(mu(LI)-N-3)] units connected by a central [Cu(BF4)(2)] unit through nitrogen atoms of end-on azido ligands and a phenoxo oxygen atom of the tridentate ligand The structures of 2 and 3 are very similar, the only difference is that the central unit is [Cu(NO1)(2)] and the nitrate group forms an additional mu-NO3-I kappa O 2 kappa O' bridge between the terminal and central copper atoms In complex 4, the central unit is a di-mu(L1)-N-3 bridged dicopper entity, [Cu-2(mu(L1)-N-3)(2)(CH3COO)(2)] that connects two terminal [Cu(L-3)(mu(L1)-N-3)] units through end-on azido; phenoxo oxygen and mu-CH3COO-1 kappa O center dot 2 kappa O' triple bridges to result in a tetranuclear unit Analyses of variable-temperature magnetic susceptibility data indicates that there is a global weak antiferromagnetic interaction between the copper(II) ions in complexes 1-3, with the exchange parameter J of -9 86, -11 6 and -19 98 cm(-1) for 1-3, respectively In complex 4 theoretical calculations show the presence of an antiferromagnetic coupling in the triple bridging ligands (acetato, phenoxo and azido) while the interaction through the double end-on azido bridging ligand is strongly ferromagnetic.

Synthesis and properties of tetra-μ-acetatodiruthenium(II,III) phenylphosphinate and phenylphosphonate complexes: X-ray crystal structures of [Ru2(μ-O2CCH3)4(HPhPO2)2]H and [Ru2(μ-O2CCH3)4(PhPO3H)2]H·H2O

Phenylphosphinic acid (HPhPO2H) and phenylphosphonic acid (PhPO3H2) react with a methanolic solution of [Ru2(μ-O2CCH3)4(O2CCH3)2]H·0.7H2O at room temperature to give [Ru2(μ-O2CCH3)4(HPhPO2)2H (1) and [Ru2(μ-O2CCH3)4 (PhPO3H)2]H·H2O (2), respectively. The X-ray crystal structures of 1 and 2 each show the RuRu core to be ligated by four bridging bidentate acetate ligands [RuRu distances: 1 = 2.272(1) Å; 2 = 2.267(2) Å] and two axial phenylphosphinate and phenylphosphonate ligands, respectively. In each complex the individual bimetallic molecules are linked together by a hydrogen ion which bridges the oxygen atoms of neighbouring axial ligands. In 2 the water molecule is also hydrogen-bonded to one of the axial phenylphosphonate groups. Spectroscopic, magnetic and cyclic voltammetric data for the complexes are given.

Synthesis of water-soluble and ether-soluble tetra-μ-acetatodiruthenium(II,III) complexes and X-ray crystal structure of [Ru2(μ-O2CC6H5)4(C2H5OH)2][Ru2(μ-O2CC6H5)4(HSO4)2]

[Ru2(μ-O2CCH3)4Cl] reacts readily with aqueous Ag2SO4 (2: 1 molar ratio) to give the sulphate salt [Ru2(μ-O2CCH3)4(H2O)2]2(SO4) (1). Addition of NaBPh4 to an aqueous solution of 1 produces the ether-soluble tetraphenylborate salt [Ru2(μ-O2CCH3)4(H2O)2][BPh4] (2). A methanolic solution of 1 reacts with Ba(C6H5CCCO2)2 · H2O to give the tetraacetatemonophenylpropynoate complex [Ru2(μ-O2CCH3)4(O2CCCC6H5)] · H2O (3). The reaction of an ethanolic suspension of [Ru2(μ-O2CC6H5)4Cl] with Ag2SO4 and H2SO4 (2 : 1 : 1 molar ratio) leads to the tetra-μ-benzoatodiruthenium(II,III) double complex salt [Ru2(μ-O2CC6H5)4(C2H5OH)2][Ru2(μ-O2CC6H5)4(HSO4)2] (4). Complex 4 is also obtained by reacting an ethanolic solution of 1 with an excess of benzoic acid in the presence of H2SO4. The X-ray crystal structure of 4 shows it to consist of [Ru2(μ-O2CC6H5)4(C2H5OH)2]+ and [Ru2(μ-O2CC6H5)4(HSO4)2]− ions, which are linked together by hydrogen bonds into an infinite polymeric chain. The RuRu distances in the cation and anion are very similar [2.265(2) and 2.272(2) Å, respectively]. Spectroscopic, magnetic, conductivity and cyclic voltammetry data are given for the complexes.

In vitro assessment of the bioaccessibility of brominated flame retardants in indoor dust using a colon extended model of the human gastrointestinal tract

An in vitro colon extended physiologically based extraction test (CEPBET) which incorporates human gastrointestinal tract (GIT) parameters (including pH and chemistry, solid-to-fluid ratio, mixing and emptying rates) was applied for the first time to study the bioaccessibility of brominated flame retardants (BFRs) from the 3 main GIT compartments (stomach, small intestine and colon) following ingestion of indoor dust. Results revealed the bioaccessibility of γ-HBCD (72%) was less than that for α- and β-isomers (92% and 80% respectively) which may be attributed to the lower aqueous solubility of the γ-isomer (2 μg L−1) compared to the α- and β-isomers (45 and 15 μg L−1 respectively). No significant change in the enantiomeric fractions of HBCDs was observed in any of the studied samples. However, this does not completely exclude the possibility of in vivo enantioselective absorption of HBCDs, as the GIT cell lining and bacterial flora – which may act enantioselectively – are not included in the current CE-PBET model. While TBBP-A was almost completely (94%) bioaccessible, BDE-209 was the least (14%) bioaccessible of the studied BFRs. Bioaccessibility of tri-hepta BDEs ranged from 32–58%. No decrease in the bioaccessibility with increasing level of bromination was observed in the studied PBDEs.

Lanthanide speciation in potential SANEX and GANEX actinide/ 2 lanthanide separations using Tetra-N-Donor extractants

Lanthanide(III) complexes with N-donor ex-tractants, which exhibit the potential for the separation of minor actinides from lanthanides in the management of spent nuclear fuel, have been directly synthesized and characterized in both solution and solid states. Crystal structures of the Pr3+, Eu3+, Tb3+, and Yb3+ complexes of 6,6′-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin3-yl)-1,10-phenanthroline(CyMe4-BTPhen) and the Pr3+, Eu3+, and Tb3+ complexes of 2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotria-zin-3-yl)-2,2′-bypyridine (CyMe4-BTBP) were obtained. The majority of these structures displayed coordination of two ofthe tetra-N-donor ligands to each Ln3+ ion, even when in some cases the complexations were performed with equimolar amounts of lanthanide and N-donor ligand. The structures showed that generally the lighter lanthanides had their coordination spheres completed by a bidentate nitrate ion, giving a 2+ charged complex cation, whereas the structures of the heavier lanthanides displayed tricationic complex species with a single water molecule completing their coordination environments. Electronic absorption spectroscopic titrations showed formation of the 1:2 Ln3+/LN4‑donor species (Ln = Pr3+, Eu3+, Tb3+) in methanol when the N-donor ligand was in excess. When the Ln3+ ion was in excess, evidence for formation of a 1:1 Ln3+/LN4‑donor complex species was observed. Luminescent lifetime studies of mixtures of Eu3+ with excess CyMe4-BTBP and CyMe4-BTPhen in methanol indicated that the nitrate-coordinated species is dominant in solution. X-ray absorption spectra of Eu3+ and Tb3+ species, formed by extraction from an acidic aqueous phase into an organic solution consisting of excess N-donor extractant in pure cyclohexanone or 30% tri-n-butyl phosphate (TBP) in cyclohexanone, were obtained. The presence of TBP in the organic phase did not alter lanthanide speciation. Extended X-ray absorption fine structure data from these spectra were fitted using chemical models established by crystallography and solution spectroscopy and showed the dominant lanthanide species in the bulk organic phase was a 1:2 Ln3+/LN‑donor species.

Dominance in the Tetra Pak case: an empirical approach

The 1991 decision of the European Commission on the Tetra Pak case was based on information which seemed to prove the firm's anti-competitive behavior. The Tetra Pak case is investigated here focusing on the meaning of multimarket dominance, using empirical techniques. We find that a more rigorous analysis of the data available would not confirm the Commission's assertions. That is, it cannot be concluded with certainty that the Commission was right to relate Tetra Pak's dominance in the aseptic sector to its market power in the non-aseptic sector. Our results suggest a general framework for the analysis of abusive transfer of market power across vertically or/and horizontally related markets.

Multiproduct activity and competition policy: The Tetra Pak case

We propose the Tetra Pak case as a real-world example to study the implications of multiproduct activity for European Competition Policy. Tetra Pak, a monopolist in aseptic carton packaging of liquid food, competes with Elopak in the nonaseptic sector. The EC Commission used the effect of Tetra Pak's dominance in the aseptic sector on its rival's performance as an evidence of the former's anticompetitive behavior. With linear demand and cost functions and interdependent demands, the Commission's position can be supported. However, a more general model suggests that the Commission's conclusions cannot be supported as the unique outcome of the analysis of the information available.

Wind-tunnel modelling of dispersion from a scalar area source in urban-like roughness

A wind-tunnel study was conducted to investigate ventilation of scalars from urban-like geometries at neighbourhood scale by exploring two different geometries a uniform height roughness and a non-uniform height roughness, both with an equal plan and frontal density of λ p = λ f = 25%. In both configurations a sub-unit of the idealized urban surface was coated with a thin layer of naphthalene to represent area sources. The naphthalene sublimation method was used to measure directly total area-averaged transport of scalars out of the complex geometries. At the same time, naphthalene vapour concentrations controlled by the turbulent fluxes were detected using a fast Flame Ionisation Detection (FID) technique. This paper describes the novel use of a naphthalene coated surface as an area source in dispersion studies. Particular emphasis was also given to testing whether the concentration measurements were independent of Reynolds number. For low wind speeds, transfer from the naphthalene surface is determined by a combination of forced and natural convection. Compared with a propane point source release, a 25% higher free stream velocity was needed for the naphthalene area source to yield Reynolds-number-independent concentration fields. Ventilation transfer coefficients w T /U derived from the naphthalene sublimation method showed that, whilst there was enhanced vertical momentum exchange due to obstacle height variability, advection was reduced and dispersion from the source area was not enhanced. Thus, the height variability of a canopy is an important parameter when generalising urban dispersion. Fine resolution concentration measurements in the canopy showed the effect of height variability on dispersion at street scale. Rapid vertical transport in the wake of individual high-rise obstacles was found to generate elevated point-like sources. A Gaussian plume model was used to analyse differences in the downstream plumes. Intensified lateral and vertical plume spread and plume dilution with height was found for the non-uniform height roughness

Quantitative analysis of remote gas temperatures and concentrations from their infrared emission spectra

Techniques for obtaining quantitative values of the temperatures and concentrations of remote hot gaseous effluents from their measured passive emission spectra have been examined in laboratory experiments and on field trials. These emission spectra were obtained using an adapted FTIR spectrometer with 0.25 cm-1 spectral resolution. The CO2 and H2O vapour content in the plume from a 55 m smoke stack and the temperature of these gases were obtained by comparing the measured emission spectra with those modelled using the HITRAN atmospheric transmission database. The spatial distributions of CO2, CO and unburnt CH4 in a laboratory methane flame were reconstructed tomographically using a matrix inversion technique.

Remote gas detection and quantitative analysis from infrared emission spectra obtained by Fourier transform infrared spectroscopy

Techniques for obtaining quantitative values of the temperatures and concentrations of remote hot gaseous effluents from their measured passive emission spectra have been examined in laboratory experiments. The high sensitivity of the spectrometer in the vicinity of the 2397 cm-1 band head region of CO2 has allowed the gas temperature to be calculated from the relative intensity of the observed rotational lines. The spatial distribution of the CO2 in a methane flame has been reconstructed tomographically using a matrix inversion technique. The spectrometer has been calibrated against a black body source at different temperatures and a self absorption correction has been applied to the data avoiding the need to measure the transmission directly. Reconstruction artifacts have been reduced by applying a smoothing routine to the inversion matrix.

Infection of bryozoans by Tetracapsuloides bryosalmonae at sites endemic for salmonid proliferative kidney disease

Laboratory-reared colonies of the bryozoans Fredericella sultana and Plumatella fungosa were placed upstream of 2 fish farms endemic for salmonid proliferative kidney disease (PKD) to assess rates of infection of bryozoans by Tetra caps uloides bryosalmonae, the causative agent of PKD. Colonies were deployed in the field for 8 trial periods of 2 wk each throughout the summer of 2001. Following each trial, bryozoan colonies were maintained in laboratory culture for 28 d and were regularly monitored for infection by searching for sac stages of T bryosalmonae. Infections were never identified by observations of sac stages, however positive PCR results and sequencing of cultured material confirmed that cryptic infections were present in colonies of both species deployed at one site. The possibility that PCR results reflected contamination of surfaces of bryozoans can be excluded, given the short period of spore viability of T bryosalmonae. Highest rates of infection occurred when 4 of 23 colonies of F sultana and 1 of 12 colonies of P. fungosa were infected during the period 10 to 24 July. No infections were detected from mid-August to late October at this site. None of the colonies at the other site became infected throughout the period of study. Our data provide the first estimates of infection rates of bryozoans by T bryosalmonae. Additionally, they provide evidence that a cryptic stage can be maintained within bryozoan hosts for a period of 4 to 6 wk.

Variations in lipophilic and vacuolar flavonoids among European Pulicaria species

Four European Pulicaria species, P. odora, P. paludosa, P. sicula and P. vulgare, were analysed for their surface and vacuolar constituents for comparison with previous data obtained for P. dysenterica. Each species had a distinct flavonoid pattern with notable differences between leaf and inflorescence. 6-Hydroxyflavonols were the major lipophilic components in all of the species and tissues except in the leaves of P. paludosa and P. vulgare, where scutellarein 6-methyl ether was the main constituent. In the leaves of P. sicula a more unusual flavone, 6-hydroxyluteolin 5,6,7,3′,4′-pentamethyl ether, was a major component. Pulicaria odora was distinguished by the presence of a series of methylated 6-hydroxykaempferol derivatives including a 3,5,6,7,4′-pentamethyl ether. Quercetagetin hexamethyl ether occurred in both tissues of P. sicula together with the 3,7,3,4′-tetra methyl ether and other quercetagetin derivatives, which were 5-methylated. Quercetagetin 3,7,3′-methyl ether was present in all species except P. odora. Flavonol glucuronides were characteristic vacuolar constituents of all the taxa studied. Two rare glycosides, patuletin and 6-hydroxykaempferol 6-methyl ether 7-glucuronides were identified in the inflorescence of P. odora. Pulicaria vulgaris, a rare plant of southern England, had the vacuolar flavonoid profile most similar to the other more abundant British plant, P. dysenterica.

Extended-chain, multinuclear transition metal complexes bridged by cyanodiazenido(1-), [N=N-C=N](-), ligands

Extended-chain complexes containing multiple transition metal centres linked by conjugated mu-cyanodiazenido(1-) ligands [N= N-C N]-have been obtained by reaction of trans-[BrW(dppe)(2)(N2CN)], 1, [dppe = 1,2-bis(diphenylphosphino) ethane] with dirhodium(II) tetra-acetate, bis(benzonitrile) palladium(II) dichloride, and bis(aqua) M(II) bis(hexa. uoroacetylacetonate) (M = Mn, Ni, Cu, Zn): stronger Lewis acids such as tetrakis(acetonitrile) palladium(II) tetra. uoroborate and boron trifl. uoride promote hydrolysis of complex 1, leading to the isolation of a novel carbamoylhydrazido(2-) complex, trans-[BrW(dppe) 2(N2HC=ONH2)](+)[BF4](-).

Structure, and thermal, magnetic and chemical properties of copper(II)iodoacetate monohydrate

Reaction of iodoacetic acid with cupric carbonate in water in dimmed light yields green Cu(ICH2COO)(2 center dot)H2O (1). From X-ray crystallography, it is found to be a tetra-acetato bridged copper(II) dimer with the water molecules occupying the apical positions. In thermogravimetry, the coordinated water molecules are lost in the temperature range 50-100 degrees C. From magnetic susceptibility measurements in the temperature range 300-1.8 K, the exchange coupling constant J is found to be -142(1) cm(-1) and g = 2.18(2) with the spin Hamiltonian H = -2J{S-Cu1 center dot S-Cu2}. It reacts with 2,2'-bipyridine (bpy) to yield [Cu(bpy)(2)I]I. It oxidises thiophenol to Ph-S-S-Ph under dry N-2 atmosphere.

Multifunctional acid formation from the gas-phase ozonolysis of beta-pinene

The gas-phase ozonolysis of beta-pinene was studied in static chamber experiments, using gas chromatography coupled to mass spectrometric and flame ionisation detection to separate and detect products. A range of multifunctional organic acids-including pinic acid, norpinic acid, pinalic-3- acid, pinalic-4-acid, norpinalic acid and OH-pinalic acid-were identified in the condensed phase after derivatisation. Formation yields for these products under systematically varying reaction conditions (by adding different OH radical scavengers and Criegee intermediate scavengers) were investigated and compared with those observed from alpha-pinene ozonolysis, allowing detailed information on product formation mechanisms to be elucidated. In addition, branching ratios for the initial steps of the reaction were inferred from quantitative measurements of primary carbonyl formation. Atmospheric implications of this work are discussed.