An alternative method for dating unknown tephras based on a segmented regression model

In CoDaWork’05, we presented an application of discriminant function analysis (DFA) to 4 different compositional datasets and modelled the first canonical variable using a segmented regression model solely based on an observation about the scatter plots. In this paper, multiple linear regressions are applied to different datasets to confirm the validity of our proposed model. In addition to dating the unknown tephras by calibration as discussed previously, another method of mapping the unknown tephras into samples of the reference set or missing samples in between consecutive reference samples is proposed. The application of these methodologies is demonstrated with both simulated and real datasets. This new proposed methodology provides an alternative, more acceptable approach for geologists as their focus is on mapping the unknown tephra with relevant eruptive events rather than estimating the age of unknown tephra. Kew words: Tephrochronology; Segmented regression

Networks of PhD Students and Academic Performance: A Comparison across Countries

In this article we compare regression models obtained to predict PhD students’ academic performance in the universities of Girona (Spain) and Slovenia. Explanatory variables are characteristics of PhD student’s research group understood as an egocentered social network, background and attitudinal characteristics of the PhD students and some characteristics of the supervisors. Academic performance was measured by the weighted number of publications. Two web questionnaires were designed, one for PhD students and one for their supervisors and other research group members. Most of the variables were easily comparable across universities due to the careful translation procedure and pre-tests. When direct comparison was not possible we created comparable indicators. We used a regression model in which the country was introduced as a dummy coded variable including all possible interaction effects. The optimal transformations of the main and interaction variables are discussed. Some differences between Slovenian and Girona universities emerge. Some variables like supervisor’s performance and motivation for autonomy prior to starting the PhD have the same positive effect on the PhD student’s performance in both countries. On the other hand, variables like too close supervision by the supervisor and having children have a negative influence in both countries. However, we find differences between countries when we observe the motivation for research prior to starting the PhD which increases performance in Slovenia but not in Girona. As regards network variables, frequency of supervisor advice increases performance in Slovenia and decreases it in Girona. The negative effect in Girona could be explained by the fact that additional contacts of the PhD student with his/her supervisor might indicate a higher workload in addition to or instead of a better advice about the dissertation. The number of external student’s advice relationships and social support mean contact intensity are not significant in Girona, but they have a negative effect in Slovenia. We might explain the negative effect of external advice relationships in Slovenia by saying that a lot of external advice may actually result from a lack of the more relevant internal advice

G+: Enhanced Traffic Grooming in WDM Mesh Networks using Lighttours

In this article, a new technique for grooming low-speed traffic demands into high-speed optical routes is proposed. This enhancement allows a transparent wavelength-routing switch (WRS) to aggregate traffic en route over existing optical routes without incurring expensive optical-electrical-optical (OEO) conversions. This implies that: a) an optical route may be considered as having more than one ingress node (all inline) and, b) traffic demands can partially use optical routes to reach their destination. The proposed optical routes are named "lighttours" since the traffic originating from different sources can be forwarded together in a single optical route, i.e., as taking a "tour" over different sources towards the same destination. The possibility of creating lighttours is the consequence of a novel WRS architecture proposed in this article, named "enhanced grooming" (G+). The ability to groom more traffic in the middle of a lighttour is achieved with the support of a simple optical device named lambda-monitor (previously introduced in the RingO project). In this article, we present the new WRS architecture and its advantages. To compare the advantages of lighttours with respect to classical lightpaths, an integer linear programming (ILP) model is proposed for the well-known multilayer problem: traffic grooming, routing and wavelength assignment The ILP model may be used for several objectives. However, this article focuses on two objectives: maximizing the network throughput, and minimizing the number of optical-electro-optical conversions used. Experiments show that G+ can route all the traffic using only half of the total OEO conversions needed by classical grooming. An heuristic is also proposed, aiming at achieving near optimal results in polynomial time

Breast cancer incidence and overdiagnosis in Catalonia (Spain)

Early detection of breast cancer (BC) with mammography may cause overdiagnosis and overtreatment, detecting tumors which would remain undiagnosed during a lifetime. The aims of this study were: first, to model invasive BC incidence trends in Catalonia (Spain) taking into account reproductive and screening data; and second, to quantify the extent of BC overdiagnosis. We modeled the incidence of invasive BC using a Poisson regression model. Explanatory variables were: age at diagnosis and cohort characteristics (completed fertility rate, percentage of women that use mammography at age 50, and year of birth). This model also was used to estimate the background incidence in the absence of screening. We used a probabilistic model to estimate the expected BC incidence if women in the population used mammography as reported in health surveys. The difference between the observed and expected cumulative incidences provided an estimate of overdiagnosis.Incidence of invasive BC increased, especially in cohorts born from 1940 to 1955. The biggest increase was observed in these cohorts between the ages of 50 to 65 years, where the final BC incidence rates more than doubled the initial ones. Dissemination of mammography was significantly associated with BC incidence and overdiagnosis. Our estimates of overdiagnosis ranged from 0.4% to 46.6%, for women born around 1935 and 1950, respectively.Our results support the existence of overdiagnosis in Catalonia attributed to mammography usage, and the limited malignant potential of some tumors may play an important role. Women should be better informed about this risk. Research should be oriented towards personalized screening and risk assessment tools

Predictors of knowledge creation performance. A quantitative qualitative comparative study of European doctorandi

Aquesta tesi forma part d'un projecte destinat a predir el rendiment acadèmic dels estudiants de doctorat portat a terme per l'INSOC (International Network on Social Capital and Performance). El grup de recerca INSOC està format per les universitats de Girona (Espanya), Ljubljana (Eslovènia), Giessen (Alemanya) i Ghent (Bèlgica). El primer objectiu d'aquesta tesi és desenvolupar anàlisis quantitatius comparatius sobre el rendiment acadèmic dels estudiants de doctorat entre Espanya, Eslovènia i Alemanya a partir dels resultats individuals del rendiment acadèmic obtinguts de cada una de les universitats. La naturalesa internacional del grup de recerca implica la recerca comparativa. Vam utilitzar variables personal, actitudinals i de xarxa per predir el rendiment. El segon objectiu d'aquesta tesi és entendre de manera qualitativa perquè les variables de xarxa no ajuden quantitativament a predir el rendiment a la universitat de Girona (Espanya). En el capítol 1, definim conceptes relacionats amb el rendiment i donam un llistat de cada una de les variables independents (variables de xarxa, personals i actitudinals), resumint la lliteratura. Finalment, explicam com s'organitzen els estudis de doctorat a cada un dels diferents països. A partir d'aquestes definicions teòriques, en els pròxims capítols, primer presentarem els qüestionaris utilitzats a Espanya, Eslovènia i Alemanya per mesurar aquests diferents tipus de variables. Després, compararem les variables que són relevants per predir el rendiment dels estudiants de doctorat a cada país. Després d'això, fixarem diferents models de regressió per predir el rendiment entre països. En tots aquests models les variables de xarxa fallen a predir el rendiment a la Universitat de Girona. Finalment, utilitzem estudis qualitatius per entendre aquests resultats inesperats. En el capítol 2, expliquem com hem dissenyat i conduït els qüestionaris en els diferents països amb l'objectiu d'explicar el rendiment dels estudiants de doctorat obtinguts a Espanya, Eslovènia i Alemanya. En el capítol 3, cream indicadors comparables però apareixen problemes de comparabilitat en preguntes particulars a Espanya, Eslovènia i Alemanya. En aquest capítol expliquem com utilitzem les variables dels tres països per crear indicadors comparables. Aquest pas és molt important perquè el principal objectiu del grup de recerca INSOC és comparar el rendiment dels estudiants de doctorat entre els diferents països. En el capítol 4 comparem models de regressió obtinguts de predir el rendiment dels estudiants de doctorat a les universitats de Girona (Espanya) i Eslovènia. Les variables són característiques dels grups de recerca dels estudiants de doctorat enteses com una xarxa social egocèntrica, característiques personals i actitudinals dels estudiants de doctorat i algunes carecterístiques dels directors. Vam trobar que les variables de xarxa egocèntriques no predien el rendiment a la Universitat de Girona. En el capítol 5, comparem dades eslovenes, espanyoles i alemnayes, seguint la metodologia del capítol 4. Concluïm que el cas alemany és molt diferent. El poder predictiu de les variables de xarxa no millora. En el capítol 6 el grup de recerca dels estudiants de doctorat és entès com una xarxa duocèntrica (Coromina et al., 2008), amb l'objectiu d'obtendre informació de la relació mútua entre els estudiants i els seus directors i els contactes d'ambdós amb els altres de la xarxa. La inclusió de la xarxa duocèntrica no millora el poder predictiu del model de regressió utilitzant les variales egocèntriques de xarxa. El capítol 7 pretèn entendre perquè les variables de xarxa no predeixen el rendiment a la Universitat de Girona. Utilitzem el mètode mixte, esperant que l'estudi qualitatiu pugui cobrir les raons de perquè la qualitat de la xarxa falla en la qualitat del treball dels estudiants. Per recollir dades per l'estudi qualitatiu utilitzem entrevistes en profunditat.

Social networks and performance in knowledge creation. An application and a methodological proposal

El objetivo de esta tesis es predecir el rendimiento de los estudiantes de doctorado en la Universidad de Girona según características personales (background), actitudinales y de redes sociales de los estudiantes. La población estudiada son estudiantes de tercer y cuarto curso de doctorado y sus directores de tesis doctoral. Para obtener los datos se ha diseño un cuestionario web especificando sus ventajas y teniendo en cuenta algunos problemas tradicionales de no cobertura o no respuesta. El cuestionario web se hizo debido a la complejidad que comportan de las preguntas de red social. El cuestionario electrónico permite, mediante una serie de instrucciones, reducir el tiempo para responder y hacerlo menos cargado. Este cuestionario web, además es auto administrado, lo cual nos permite, según la literatura, unas respuestas mas honestas que cuestionario con encuestador. Se analiza la calidad de las preguntas de red social en cuestionario web para datos egocéntricos. Para eso se calcula la fiabilidad y la validez de este tipo de preguntas, por primera vez a través del modelo Multirasgo Multimétodo (Multitrait Multimethod). Al ser datos egocéntricos, se pueden considerar jerárquicos, y por primera vez se una un modelo Multirasgo Multimétodo Multinivel (multilevel Multitrait Multimethod). Las la fiabilidad y validez se pueden obtener a nivel individual (within group component) o a nivel de grupo (between group component) y se usan para llevar a cabo un meta-análisis con otras universidades europeas para analizar ciertas características de diseño del cuestionario. Estas características analizan si para preguntas de red social hechas en cuestionarios web son más fiables y validas hechas "by questions" o "by alters", si son presentes todas las etiquetas de frecuencia para los ítems o solo la del inicio y final, o si es mejor que el diseño del cuestionario esté en con color o blanco y negro. También se analiza la calidad de la red social en conjunto, en este caso específico son los grupos de investigación de la universidad. Se tratan los problemas de los datos ausentes en las redes completas. Se propone una nueva alternativa a la solución típica de la red egocéntrica o los respondientes proxies. Esta nueva alternativa la hemos nombrado "Nosduocentered Network" (red Nosduocentrada), se basa en dos actores centrales en una red. Estimando modelos de regresión, esta "Nosduocentered network" tiene mas poder predictivo para el rendimiento de los estudiantes de doctorado que la red egocéntrica. Además se corrigen las correlaciones de las variables actitudinales por atenuación debido al pequeño tamaño muestral. Finalmente, se hacen regresiones de los tres tipos de variables (background, actitudinales y de red social) y luego se combinan para analizar cual para predice mejor el rendimiento (según publicaciones académicas) de los estudiantes de doctorado. Los resultados nos llevan a predecir el rendimiento académico de los estudiantes de doctorado depende de variables personales (background) i actitudinales. Asimismo, se comparan los resultados obtenidos con otros estudios publicados.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.