Application for fault location in electrical power distribution systems

Fault location has been studied deeply for transmission lines due to its importance in power systems. Nowadays the problem of fault location on distribution systems is receiving special attention mainly because of the power quality regulations. In this context, this paper presents an application software developed in Matlabtrade that automatically calculates the location of a fault in a distribution power system, starting from voltages and currents measured at the line terminal and the model of the distribution power system data. The application is based on a N-ary tree structure, which is suitable to be used in this application due to the highly branched and the non- homogeneity nature of the distribution systems, and has been developed for single-phase, two-phase, two-phase-to-ground, and three-phase faults. The implemented application is tested by using fault data in a real electrical distribution power system

Dissolution of Dynamic Electronic Institutions, a first approach: Relevant factors and causes

In the context of the digital business ecosystems, small organizations cooperate between them in order to achieve common goals or offer new services for expanding their markets. There are different approaches for these cooperation models such as virtual enterprises, virtual organizations or dynamic electronic institutions which in their lifecycle have in common a dissolution phase. However this phase has not been studied deeply in the current literature and it lacks formalization. In this paper a first approach for achieving and managing the dissolution phase is proposed, as well as a CBR process in order to support it in a multi-agent system

L'oviparisme en la família Scorpaenidae (Pisces: Scorpaeniformes)

En aquest treball de tesi doctoral es descriu l'estructura gonadal, gametogènesi i cicle anual de Scorpaena porcus, S. scrofa i S. elongata per tal d'aprofundir en el coneixement dels diferents graus d'especialització dins l'oviparisme en peixos. Es pretén fer èmfasi en aquells trets inusuals que difereixen del què s'ha descrit fins ara per la majoria de les espècies ovípares de teleostis, i relacionar-los amb l'estratègia reproductiva de les espècies que els presenten El mostreig s'ha dut a terme de forma intensiva entre l'any 2000 i 2002, tot i que s'ha continuat recol·lectant mostres fins a l'agost de 2004, amb més o menys freqüència segons la necessitat. En total s'han obtingut 258 exemplars de S. porcus, 119 de S. scrofa i 46 de S. elongata. S'ha pogut veure com S. porcus, S. scrofa i S. elongata són espècies ovípares ovulípares especialitzades, ja que la seva estructura ovàrica presenta tot una sèrie de trets molt particulars i poc comuns a la resta de peixos ovípars estudiats fins ara: posició central del raquis musculo-connectiu que es troba envoltat completament pel lumen i la paret ovàrica; presència de peduncles en oòcits en fase de creixement secundari; escassetat i mida petita dels alvèols corticals; poc gruix de la zona radiata; i secreció d'una massa gelatinosa que engloba els ous en el moment de la posta. Totes aquestes característiques també s'han observat en Scorpaena notata, suggerint que l'especialització de l'oviparisme ovulípar es dóna en tot el gènere Scorpaena. L'estructura testicular i l'espermatogènesi d'aquestes espècies també és força particular. Per una banda els testicles són del tipus lobular no-restringit, tot i que presenten algunes característiques com la ordenació parcial dels cists segons l'estadi de maduració de les cèl·lules germinals que contenen i l'absència de lumen central, que actualment només s'ha observat en testicles del tipus lobular restringit de les espècies de la sèrie Aterinomorpha. Per l'altre banda, l'espermatogènesi és del tipus semicística, és a dir, els cists s'obren abans d'acabar tot el procés i les cèl·lules germinals s'acaben de desenvolupar a la llum del lòbul fins a espermatozoides. La posta d'aquestes espècies és múltipla i constisteix en una massa gelatinosa d'ous pelàgica, que en el cas de S. porcus s'alliberen entre els mesos de juny i agost, i en S. scrofa, a partir del mes de juliol. S'ha relacionat la presència d'aquesta massa amb un aparellament mascle-femella, de manera que el mascle alliberaria l'esperma directament sobre la massa d'ous, assegurant així la fartilització total dels mateixos.

Filogeografia de la truita comuna (Salmo trutta) basada en la diversitat molecular del DNA mitocondrial

Les anàlisis realitzades en cent deu poblacions de truita comuna (Salmo trutta) que abarquen el seu rang natural de distribució indiquen que el patró filogenètic es relaciona amb les tres grans vessants on es troba distribuïda l'espècie: ponto-càspia, atlàntica i mediterrània. Aquesta diferenciació estaria associada a l'aïllament de les vessants durant el Quaternari. L'origen de l'espècie es relaciona amb la vessant ponto-càspia, d'acord amb els models biogeogràfics que postulen l'origen asiàtic de la ictiofauna europea. S'ha detectat també un segon nivell de divergència dins de cada vessant que dóna com a resultat l'existència de sis llinatges evolutius: Atlàntic i Duero a la vessant atlàntica, els llinatges Adriàtic, Mediterrani i Marmoratus als rius mediterranis, i el llinatge Danubi a la zona ponto-càspia. Les glaciacions del Pleistocè han modificat profundament el rang de distribució de la truita comuna, especialment a la vessant atlàntica, on s'han proposat quatre grans refugis glacials: a l'est de la capa de gel, a Europa central, a l'entorn del canal de la Mànega i a l'entorn del golf de Biscaia; tot i que només els tres primers haurien participat en la recolonització del nord d'Europa al final de l'última glaciació. El quart refugi, que inclou el sud de França i el Cantàbric hauria estat l'origen de l'expansió cap al sud durant el Pleistocè Superior d'un grup de poblacions distribuïdes actualment a la vessant atlàntica ibèrica, i també hauria servit de base per a l'expansió cap al nord d'altres grups de truita durant interglacials anteriors. A la vessant atlàntica de la peninsula Ibèrica, l'estructura poblacional es troba associada a la xarxa hidrogràfica i es determinen fins a cinc unitats poblacionals: les truites dels rius Cantàbrics, les del Miño, les del Duero, les del Tajo i les del Guadalquivir. Les poblacions del Guadalquivir pertanyerien a un grup d'influència mediterrània. Els marcadors d'al·lozims i de DNA mitocondrial es troben fortament correlacionats en aquesta vessant, on apunten cap als mateixos grups de poblacions. Per contra, els rius de la vessant mediterrània haurien estat colonitzats pels llinatges Adriàtic i Mediterrani i s'hauria produït una intensa intergradació secundària entre aquests llinatges durant els períodes glacials a partir de l'expansió de les poblacions retingudes a les capçaleres durant els interglacials. Els grups de hibridació, l'aïllament i la deriva en el període interglacial fa que els grups de poblacions identificats pels marcadors d'al·lozims i de DNA mitocondrial no coincideixin.

Implementation and application of basis set superposition error-correction schemes to the theoretical modeling of weak intermolecular interactions

This thesis deals with the so-called Basis Set Superposition Error (BSSE) from both a methodological and a practical point of view. The purpose of the present thesis is twofold: (a) to contribute step ahead in the correct characterization of weakly bound complexes and, (b) to shed light the understanding of the actual implications of the basis set extension effects in the ab intio calculations and contribute to the BSSE debate. The existing BSSE-correction procedures are deeply analyzed, compared, validated and, if necessary, improved. A new interpretation of the counterpoise (CP) method is used in order to define counterpoise-corrected descriptions of the molecular complexes. This novel point of view allows for a study of the BSSE-effects not only in the interaction energy but also on the potential energy surface and, in general, in any property derived from the molecular energy and its derivatives A program has been developed for the calculation of CP-corrected geometry optimizations and vibrational frequencies, also using several counterpoise schemes for the case of molecular clusters. The method has also been implemented in Gaussian98 revA10 package. The Chemical Hamiltonian Approach (CHA) methodology has been also implemented at the RHF and UHF levels of theory for an arbitrary number interacting systems using an algorithm based on block-diagonal matrices. Along with the methodological development, the effects of the BSSE on the properties of molecular complexes have been discussed in detail. The CP and CHA methodologies are used for the determination of BSSE-corrected molecular complexes properties related to the Potential Energy Surfaces and molecular wavefunction, respectively. First, the behaviour of both BSSE-correction schemes are systematically compared at different levels of theory and basis sets for a number of hydrogen-bonded complexes. The Complete Basis Set (CBS) limit of both uncorrected and CP-corrected molecular properties like stabilization energies and intermolecular distances has also been determined, showing the capital importance of the BSSE correction. Several controversial topics of the BSSE correction are addressed as well. The application of the counterpoise method is applied to internal rotational barriers. The importance of the nuclear relaxation term is also pointed out. The viability of the CP method for dealing with charged complexes and the BSSE effects on the double-well PES blue-shifted hydrogen bonds is also studied in detail. In the case of the molecular clusters the effect of high-order BSSE effects introduced with the hierarchical counterpoise scheme is also determined. The effect of the BSSE on the electron density-related properties is also addressed. The first-order electron density obtained with the CHA/F and CHA/DFT methodologies was used to assess, both graphically and numerically, the redistribution of the charge density upon BSSE-correction. Several tools like the Atoms in Molecules topologycal analysis, density difference maps, Quantum Molecular Similarity, and Chemical Energy Component Analysis were used to deeply analyze, for the first time, the BSSE effects on the electron density of several hydrogen bonded complexes of increasing size. The indirect effect of the BSSE on intermolecular perturbation theory results is also pointed out It is shown that for a BSSE-free SAPT study of hydrogen fluoride clusters, the use of a counterpoise-corrected PES is essential in order to determine the proper molecular geometry to perform the SAPT analysis.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.