8 resultados para asymmetric electrosynthesis
em Universitat de Girona, Spain
Resumo:
The objective of traffic engineering is to optimize network resource utilization. Although several works have been published about minimizing network resource utilization, few works have focused on LSR (label switched router) label space. This paper proposes an algorithm that takes advantage of the MPLS label stack features in order to reduce the number of labels used in LSPs. Some tunnelling methods and their MPLS implementation drawbacks are also discussed. The described algorithm sets up NHLFE (next hop label forwarding entry) tables in each LSR, creating asymmetric tunnels when possible. Experimental results show that the described algorithm achieves a great reduction factor in the label space. The presented works apply for both types of connections: P2MP (point-to-multipoint) and P2P (point-to-point)
Resumo:
The aim of traffic engineering is to optimise network resource utilization. Although several works on minimizing network resource utilization have been published, few works have focused on LSR label space. This paper proposes an algorithm that uses MPLS label stack features in order to reduce the number of labels used in LSPs forwarding. Some tunnelling methods and their MPLS implementation drawbacks are also discussed. The algorithm described sets up the NHLFE tables in each LSR, creating asymmetric tunnels when possible. Experimental results show that the algorithm achieves a large reduction factor in the label space. The work presented here applies for both types of connections: P2MP and P2P
Resumo:
Traffic Engineering objective is to optimize network resource utilization. Although several works have been published about minimizing network resource utilization in MPLS networks, few of them have been focused in LSR label space reduction. This letter studies Asymmetric Merged Tunneling (AMT) as a new method for reducing the label space in MPLS network. The proposed method may be regarded as a combination of label merging (proposed in the MPLS architecture) and asymmetric tunneling (proposed recently in our previous works). Finally, simulation results are performed by comparing AMT with both ancestors. They show a great improvement in the label space reduction factor
Resumo:
The incorporation of space allows the establishment of a more precise relationship between a contaminating input, a contaminating byproduct and emissions that reach the final receptor. However, the presence of asymmetric information impedes the implementation of the first-best policy. As a solution to this problem a site specific deposit refund system for the contaminating input and the contaminating byproduct are proposed. Moreover, the utilization of a successive optimization technique first over space and second over time enables definition of the optimal intertemporal site specific deposit refund system
Resumo:
This paper presents a control strategy for blood glucose(BG) level regulation in type 1 diabetic patients. To design the controller, model-based predictive control scheme has been applied to a newly developed diabetic patient model. The controller is provided with a feedforward loop to improve meal compensation, a gain-scheduling scheme to account for different BG levels, and an asymmetric cost function to reduce hypoglycemic risk. A simulation environment that has been approved for testing of artificial pancreas control algorithms has been used to test the controller. The simulation results show a good controller performance in fasting conditions and meal disturbance rejection, and robustness against model–patient mismatch and errors in meal estimation
Resumo:
La Tesis describe una serie de complejos de Rutenio conteniendo ligandos quirales y su aplicación en catálisis asimétrica. Por un lado se describe el complejo [RuCl(bpea)((S)-BINAP)](BF4), donde (S)-BINAP es una difosfina quiral y bpea un ligando N-tridentado. Su aplicación en catálisis de hidrogenación asimétrica de sustratos olefínicos y carbonílicos, tanto en fase homogénea como heterogénea (tras inmovilización sobre soportes alumino-fosfato), ha mostrado excelentes resultados de conversión y excesos enantioméricos. Aparte, se ha desarrollado una familia de complejos con fórmula [Ru(T)(B)X], donde T representa un ligando tri-N-dentado, B una di-oxazolina quiral y X es Cl o H2O. Se ha estudiado la actividad catalítica de los aquocomplejos con T = tpm en epoxidaciones, determinándose la influencia de los sustituyentes en B sobre el rendimiento y la quimioselectividad, favorecidos por interacciones de tipo π-stacking. El uso de otros ligandos tridentados ha llevado a su rotura, habiéndose caracterizado sin embargo los correspondientes complejos
Resumo:
The oxidative addition proved to be a useful method to prepare platinum (II) hydridotiolate by reaction of tetrakis(triphenylphosphine)platinum(0) with aminothiolate and phosphinothiolate ligands like cysteamine, cysteine ethyl and methyl Esther, 2-(diphenylphosphino)ethanetiol and 2-(diphenylphosphino)propanetiol. The complexes are square-planar and the aminothiolate or phosphinothiolate ligands are chelated to platinum (II). The hydrido ligand is trans to the sulfur and the other coordination position is occuped by a triphenylphosphine ligand. The complexes are mononuclear and they show low symmetry. The only symmetry element, the plan is broke if the ligand is branched, obtaining asymmetric complexes C1. If the ligand has electronic or esteric impediments the reaction doesn't run and the starting products are recovered. This was observed with N,N-dimethylcysteamine and penicylamine methyl esther ligands. In the special case of orthoaminotiophenol the hydridotiolate was obtained but the ligand was not chelated. The aminothiolate complexes don't show solution equilibrium. Otherwise, the complexe with 2-(diphenylphosphino)ethanetiol show an isomerisation equilibrium which forms cis isomer as a minor component. The complexe with 2-(diphenylphosphino)-propanetiol shows a conformational equilibrium between chair and twist forms. The complexes have been tested as catalyst precursors in hydroformylation and hydrosilylation reactions. The hydroformylation reaction runs only in presence of SnCl2 as cocatalyst. Catalytic activity depends on the presence of triphenylphosphine and, with less magnitude, CO and H2 pressure. We also studied the enantioselectivity using a chiral complexe. In the hydrosililation reaction, catalysts run with good results (<90%) using triethylsilane as silicon hydride. Dehydrogenative addition product has been also found in this reaction.
Resumo:
El coneixement de la superfície d'energia potencial (PES) ha estat essencial en el món de la química teòrica per tal de discutir tant la reactivitat química com l'estructura i l'espectroscòpia molecular. En el camp de la reactivitat química es hem proposat continuar amb el desenvolupament de nova metodologia dins el marc de la teoria del funcional de la densitat conceptual. En particular aquesta tesis es centrarà en els següents punts: a) El nombre i la naturalesa dels seus punts estacionaris del PES poden sofrir canvis radicals modificant el nivell de càlcul utilitzats, de tal manera que per estar segurs de la seva naturalesa cal anar a nivells de càlcul molt elevats. La duresa és una mesura de la resistència d'un sistema químic a canviar la seva configuració electrònica, i segons el principi de màxima duresa on hi hagi un mínim o un màxim d'energia trobarem un màxim o un mínim de duresa, respectivament. A l'escollir tot un conjunt de reaccions problemàtiques des del punt de vista de presència de punts estacionaris erronis, hem observat que els perfils de duresa són més independents de la base i del mètode utilitzats, a més a més sempre presenten el perfil correcte. b) Hem desenvolupat noves expressions basades en les integracions dels kernels de duresa per tal de determinar la duresa global d'una molècula de manera més precisa que la utilitzada habitualment que està basada en el càlcul numèric de la derivada segona de l'energia respecte al número d'electrons. c) Hem estudiat la validesa del principis de màxima duresa i de mínima polaritzabiliat en les vibracions asimètriques en sistemes aromàtics. Hem trobat que per aquests sistemes alguns modes vibracionals incompleixen aquests principis i hem analitzat la relació d'aquest l'incompliment amb l'efecte de l'acoblament pseudo-Jahn-Teller. A més a més, hem postulat tot un conjunt de regles molt senzilles que ens permetien deduir si una molècula compliria o no aquests principis sense la realització de cap càlcul previ. Tota aquesta informació ha estat essencial per poder determinar exactament quines són les causes del compliment o l'incompliment del MHP i MPP. d) Finalment, hem realitzat una expansió de l'energia funcional en termes del nombre d'electrons i de les coordenades normals dintre del conjunt canònic. En la comparació d'aquesta expansió amb l'expansió de l'energia del nombre d'electrons i del potencial extern hem pogut recuperar d'una altra forma diferent tot un conjunt de relacions ja conegudes entre alguns coneguts descriptors de reactivitat del funcional de la densitat i en poden establir tot un conjunt de noves relacions i de nous descriptors. Dins del marc de les propietats moleculars es proposa generalitzar i millorar la metodologia pel càlcul de la contribució vibracional (Pvib) a les propietats òptiques no lineals (NLO). Tot i que la Pvib no s'ha tingut en compte en la majoria dels estudis teòrics publicats de les propietats NLO, recentment s'ha comprovat que la Pvib de diversos polímers orgànics amb altes propietats òptiques no lineals és fins i tot més gran que la contribució electrònica. Per tant, tenir en compte la Pvib és essencial en el disseny dels nous materials òptics no lineals utilitzats en el camp de la informàtica, les telecomunicacions i la tecnologia làser. Les principals línies d'aquesta tesis sobre aquest tema són: a) Hem calculat per primera vegada els termes d'alt ordre de Pvib de diversos polímers orgànics amb l'objectiu d'avaluar la seva importància i la convergència de les sèries de Taylor que defineixen aquestes contribucions vibracionals. b) Hem avaluat les contribucions electròniques i vibracionals per una sèrie de molècules orgàniques representatives utilitzant diferents metodologies, per tal de poder de determinar quina és la manera més senzilla per poder calcular les propietats NLO amb una precisió semiquantitativa.