Application for fault location in electrical power distribution systems

Fault location has been studied deeply for transmission lines due to its importance in power systems. Nowadays the problem of fault location on distribution systems is receiving special attention mainly because of the power quality regulations. In this context, this paper presents an application software developed in Matlabtrade that automatically calculates the location of a fault in a distribution power system, starting from voltages and currents measured at the line terminal and the model of the distribution power system data. The application is based on a N-ary tree structure, which is suitable to be used in this application due to the highly branched and the non- homogeneity nature of the distribution systems, and has been developed for single-phase, two-phase, two-phase-to-ground, and three-phase faults. The implemented application is tested by using fault data in a real electrical distribution power system

A hybrid method for sag source location in power network

The work presented in this paper belongs to the power quality knowledge area and deals with the voltage sags in power transmission and distribution systems. Propagating throughout the power network, voltage sags can cause plenty of problems for domestic and industrial loads that can financially cost a lot. To impose penalties to responsible party and to improve monitoring and mitigation strategies, sags must be located in the power network. With such a worthwhile objective, this paper comes up with a new method for associating a sag waveform with its origin in transmission and distribution networks. It solves this problem through developing hybrid methods which hire multiway principal component analysis (MPCA) as a dimension reduction tool. MPCA reexpresses sag waveforms in a new subspace just in a few scores. We train some well-known classifiers with these scores and exploit them for classification of future sags. The capabilities of the proposed method for dimension reduction and classification are examined using the real data gathered from three substations in Catalonia, Spain. The obtained classification rates certify the goodness and powerfulness of the developed hybrid methods as brand-new tools for sag classification

Visual management of sags and incidents gathered in distribution substations for power quality management

Monitor a distribution network implies working with a huge amount of data coining from the different elements that interact in the network. This paper presents a visualization tool that simplifies the task of searching the database for useful information applicable to fault management or preventive maintenance of the network

Estimation of zero-sequence impedance of undergrounds cables for single-phase fault location in distribution systems with electric arc

This paper focus on the problem of locating single-phase faults in mixed distribution electric systems, with overhead lines and underground cables, using voltage and current measurements at the sending-end and sequence model of the network. Since calculating series impedance for underground cables is not as simple as in the case of overhead lines, the paper proposes a methodology to obtain an estimation of zero-sequence impedance of underground cables starting from previous single-faults occurred in the system, in which an electric arc occurred at the fault location. For this reason, the signal is previously pretreated to eliminate its peaks voltage and the analysis can be done working with a signal as close as a sinus wave as possible

Instal·lació d'energia fotovoltaica d'una casa de colònies

Els objectius d'aquest projecte són el disseny d'una instal·lació fotovoltaica connectada a xarxa que sigui capaç de produir la mateixa quantitat d’energia que consumeix la casa de colònies a on es troba ubicada. La particularitat d’aquesta instal·lació serà que els generadors fotovoltaics aniran sobra una plataforma giratòria que seguirà el sol buscant sempre la millor i major producció energètica. El control d'aquesta estructura anirà a càrrec d'un autòmat programable. Aprofitant l'existència de panells fotovoltaics, s'ha dissenyat un sistema d’acumulació d’energia de 2 kW de potència que dotarà de corrent una línia que, en cas de falla en el sistema d’alimentació general, es mantindrà ininterrompuda. Aquesta línia serà de 230 V i està dissenyada per tenir una autonomia de 2 hores

Estudio del impacto ambiental del uso del bagazo como fuente de energía en centrales azucareros en Cuba. Estudio de caso "Melanio Hernández"

This work was carried out to study the environmental impacts produced by power generation from biomass (bagasse) in sugar mills in Cuba. For this purpose, with the collaboration of the Center for Energy and Industrial Processes (CEEPI), the University Center of Sancti Spiritus and using different research methods and techniques, conducted an environmental survey of the area. Gaseous emissions were characterized and the suspended solid particles, allowing knowing that these concentrations do not exceed the maximum emission limit set by the cubana Standard. In addition, the dispersion model applied DISPER allowed us to obtain information in crisis conditions of air emissions from sugar mill and distillery associated and concluded that emissions from the distillery are the pollutants that contribute more the atmosphere. The correlating emissions with respiratory diseases, (acute respiratory infections or subacute (IRA) and ASMA), concurrent Asthma Crisis (CAB) is the most affected. The calculated costs associated in these diseases, amounting to $ 119 599.23 per year. In order to minimize the negative alternatives are proposed to be implemented in industry and community.

Evaluación de la biomasa como recurso energético renovable en Cataluña

El objetivo principal es la evaluación de la biomasa como recurso energético renovable en Cataluña. Su alcance requiere el estudio de diversas temáticas, desarrolladas en los doce capítulos que componen el documento.El Capítulo 1 describe los objetivos de la tesis. El Capítulo 2 describe los motivos que justifican la valorización energética del recurso biomasa. El Capítulo 3 presenta la metodología general utilizada. El Capítulo 4 realiza un análisis multicriterio del aprovechamiento energético de biomasa forestal. El Capítulo 5 cuantifica la biomasa disponible para usos energéticos en Cataluña. Los Capítulos 6, 7, 8 y 9 analizan las tecnologías y la viabilidad de la producción de energía con colza y chopo. El Capítulo 10 caracteriza físico-químicamente la biomasa de colza como combustible complementario al actual uso del grano para biodiesel. El Capítulo 11 evalua el uso de cultivos para la producción de productos químicos. El Capítulo 12 resume las Conclusiones generales.