On AUV control architecture

This paper surveys control architectures proposed in the literature and describes a control architecture that is being developed for a semi-autonomous underwater vehicle for intervention missions (SAUVIM) at the University of Hawaii. Conceived as hybrid, this architecture has been organized in three layers: planning, control and execution. The mission is planned with a sequence of subgoals. Each subgoal has a related task supervisor responsible for arranging a set of pre-programmed task modules in order to achieve the subgoal. Task modules are the key concept of the architecture. They are the main building blocks and can be dynamically re-arranged by the task supervisor. In our architecture, deliberation takes place at the planning layer while reaction is dealt through the parallel execution of the task modules. Hence, the system presents both a hierarchical and an heterarchical decomposition, being able to show a predictable response while keeping rapid reactivity to the dynamic environment

A mixed H2/H∞-based semiactive control for vibration mitigation in flexible structures

In this paper, we address this problem through the design of a semiactive controller based on the mixed H2/H∞ control theory. The vibrations caused by the seismic motions are mitigated by a semiactive damper installed in the bottom of the structure. It is meant by semiactive damper, a device that absorbs but cannot inject energy into the system. Sufficient conditions for the design of a desired control are given in terms of linear matrix inequalities (LMIs). A controller that guarantees asymptotic stability and a mixed H2/H∞ performance is then developed. An algorithm is proposed to handle the semiactive nature of the actuator. The performance of the controller is experimentally evaluated in a real-time hybrid testing facility that consists of a physical specimen (a small-scale magnetorheological damper) and a numerical model (a large-scale three-story building)

QFT control for vibration reduction in structures equipped with MR dampers

This short paper addresses the problem of designing a QFT (quantitative feedback theory) based controllers for the vibration reduction in a 6-story building structure equipped with shear-mode magnetorheological dampers. A new methodology is proposed for characterizing the nonlinear hysteretic behavior of the MR damper through the uncertainty template in the Nichols chart. The design procedure for QFT control design is briefly presented

A mission control system for an autonomous underwater vehicle

The presented work focuses on the theoretical and practical aspects concerning the design and development of a formal method to build a mission control system for autonomous underwater vehicles bringing systematic design principles for the formal description of missions using Petri nets. The proposed methodology compounds Petri net building blocks within it to de_ne a mission plan for which it is proved that formal properties, such as reachability and reusability, hold as long as these same properties are also guaranteed by each Petri net building block. To simplify the de_nition of these Petri net blocks as well as their composition, a high level language called Mission Control Language has been developed. Moreover, a methodology to ensure coordination constraints for teams of multiple robots as well as the de_nition of an interface between the proposed system and an on-board planner able to plan/replan sequences of prede_ned mission plans is included as well. Results of experiments with several real underwater vehicles and simulations involving an autonomous surface craft and an autonomous underwater vehicles are presented to show the system's capabilities.

Els valors límit d'exposició professional i límits biològics per a agents químics en l'àmbit de treball, mesura i control. Evolució de la normativa sobre el plom i la seva incidència sobre els accidents laborals i malalties professionals en la indústria ceràmica

L'objectiu d'aquesta tesi és l'estudi dels valors límit d'exposició professional previstos en la normativa actual com a valors de referència per a l'avaluació i control dels riscos que comporta l'exposició a agents químics presents en el lloc de treball, fonamentalment per inhalació, per protegir la salut dels treballadors. No es pretén realitzar ni un estudi epidemiològic ni un estudi d'higiene, només s'utilitzen els valors d'exposició professional per analitzar el compliment de la normativa sobre la presència de plom en l'ambient de treball, i comprovar si el compliment de la normativa comporta la millora de la salut dels treballadors en funció de la millora de les concentracions de valors ambientals o biològics de l'exposició dels treballadors. La Directiva 98/24/CE deroga les Directives 80/1107/CEE sobre la protecció dels treballadors contra els riscos relacionats amb l'exposició a agents químics, físics i biològics durant el treball, i la Directiva 82/605/CEE, sobre la protecció dels treballadors contra riscos relacionats amb una exposició al plom metàl·lic i als seus compostos iònics durant el treball. S'analitza l'evolució de la normativa sobre la presència d'agents químics en l'ambient de treball, i en concret el plom, i la seva incidència en els accidents laborals i malalties professionals, i el compliment de la normativa al final d'un cicle marcat per l'entrada en vigor de la Directiva 98/24/CE. Per realitzar l'anàlisi anteriorment esmentada s'estudia la indústria ceràmica de les comarques gironines, de la construcció, de l'alimentació i decorativa, a través de les mesures de plom en l'ambient laboral i les mesures de plom en sang dels treballadors d'aquesta indústria des de 1991 a 1996.