Molekularbiologische Funktionsanalysen von Thioredoxinen aus Dictyostelium discoideum und Identifizierung neuer Interaktionspartner durch das Two-Hybrid-System

Thioredoxins are small, regulatory proteins with a mass of approximately 12 kDa and a characteristic conserved active center, which is represented in the pentapeptide trp-cys-gly-pro-cys. Up to now it is not possible to present a complete list of thioredoxin interaction partners because there is no predictable sequence in the target enzymes where thioredoxins can interact with. To get closer information about the functions and possible interaction partners of the three thioredoxins from the social soil amoeba Dictyostelium discoideum (DdTrx1 - 3) we have chosen two different strategies. In the first one the thioredoxin levels in the cell should changed by different mutants. But both the antisense technique as well as the creation of knock out mutants were not appropiate strategies in this case. Just an thioredoxin overexpressing mutant results in a developmental phenotype which allows some conclusions for possible functions of the thioredoxin in Dictyostelium discoideum. The second strategie was the two hybrid system where thioredoxin interactions partners can identified systematically. After a screening with a cDNA library from Dictyostelium 13 potential interaction partners could be detected, among them a ribonucleotid reductase, TRFA, two different cytochrome c oxidase subunits, filopodin, three ribosomal proteins, the elongationfactor 1a and the alcohol dehydrogenase from yeast. The verification of the interaction between thioredoxin and these two hybrid clones happened indirectly by a dobble mutant of thioredoxin 1, where the cysteines in the active center were replaced by redox-inactive serins. Further examinations of two choosen candidates resulted that the alcohol dehydrogenase from yeast is a thioredoxin-modululated enzym and that there is an interaction between the elongationfactor 1a and the thioredoxin 1 from Dictyostelium discoideum.

Not the outside but the inside matters : functional analysis of Capricious and Tartan during Drosophila tracheal morphogenesis

The tubular structures, which transport essential gases, liquids, or cells from one site to another, are shared among various divergent organisms. These highly organized tubular networks include lung, kidney, vasculature and mammary gland in mammals as well as trachea and salivary gland in Drosophila melanogaster. Many questions regarding the tubular morphogenesis cannot be addressed sufficiently by investigating the mammalian organs because their structures are extremely complex and therefore, systematic analyses of genetic and cellular programs guiding the development is not possible. In contrast, the Drosophila tracheal development provides an excellent model system since many molecular markers and powerful tools for genetic manipulations are available. Two mechanisms were shown to be important for the outgrowth of tracheal cells: the FGF signaling pathway and the interaction between the tracheal cells and the surrounding mesodermal cells. The Drosophila FGF ligand encoded by branchless (bnl) is localized in groups of cells near tracheal metameres. The tracheal cells expressing the FGF receptor breathless (btl) respond to these sources of FGF ligand and extend towards them. However, this FGF signaling pathway is not sufficient for the formation of continuous dorsal trunk, the only muticellular tube in tracheal system. Recently, it was found out that single mesodermal cells called bridge-cells are essential for the formation of continuous dorsal trunk as they direct the outgrowth of dorsal trunk cells towards the correct targets. The results in this PhD thesis demonstrate that a cell adhesion molecule Capricious (Caps), which is specifically localized on the surface of bridge-cells, plays an essential role in guiding the outgrowing dorsal trunk cells towards their correct targets. When caps is lacking, some bridge-cells cannot stretch properly towards the adjacent posterior tracheal metameres and thus fail to interconnect the juxtaposing dorsal trunk cells. Consequently, discontinuous dorsal trunks containing interruptions at several positions are formed. On the other hand, when caps is ectopically expressed in the mesodermal cells through a twi-GAL4 driver, these mesodermal cells acquire a guidance function through ectopic caps and misguide the outgrowing dorsal trunk cells in abnormal directions. As a result, disconnected dorsal trunks are formed. These loss- and gain-of-function studies suggest that Caps presumably establishes the cell-to-cell contact between the bridge-cells and the tracheal cells and thereby mediates directly the guidance function of bridge-cells. The most similar protein known to Caps is another cell adhesion molecule called Tartan (Trn). Interestingly, trn is expressed in the mesodermal cells but not in the bridge-cells. When trn is lacking, the outgrowth of not only the dorsal trunks but also the lateral trunks are disrupted. However, in contrast to the ectopic expression of caps, the misexpression of trn does not affect tracheal development. Whereas Trn requires only its extracellular domain to mediate the matrix function, Caps requires both its extracellular and intracellular domains to function as a guidance molecule in the bridge-cells. These observations suggest that Trn functions differently from Caps during tracheal morphogenesis. Presumably, Trn mediates a matrix function of mesodermal cells, which support the tracheal cells to extend efficiently through the surrounding mesodermal tissue. In order to determine which domains dictate the functional specificity of Caps, two hybrid proteins CapsEdTrnId, which contains the Caps extracellular domain and the Trn intracellular domain, and TrnEdCapsId, which consists of the Trn extracellular domain and the Caps intracellular domain, were constructed. Gain of function and rescue experiments with these hybrid proteins suggest on one hand that the extracellular domains of Caps and Trn are functionally redundant and on the other hand that the intracellular domain dictates the functional specificity of Caps. In order to identify putative interactors of Caps, yeast two-hybrid screening was performed. An in vivo interaction assay in yeast suggests that Ras64B interacts specifically with the Caps intracellular domain. In addition, an in vitro binding assay reveals a direct interaction between an inactive form of Ras64B and the Caps intracellular domain. ras64B, which encodes a small GTPase, is expressed in the mesodermal cells concurrently as caps. Finally, a gain-of-function study with the constitutively active Ras64B suggests that Ras64B presumably functions downstream of Caps. All these results suggest consistently that the small GTPase Ras64B binds specifically to the Caps intracellular domain and may thereby mediate the guidance function of Caps.

Funktionsanalysen der Domänen des Vacuolin B und die Rolle des filamentösen Actins am Vacuolin B-positiven Kompartiment im endocytotischen Transit in Dictyostelium discoideum

Ähnlich wie in Säugerzellen ist das neutrale Postlysosom in Dictyostelium discoideum von einem Coat aus filamentösem Actin umgeben. In dieser Arbeit wurde der Frage nach der Funktion dieses Actin-Cytoskeletts am späten Endosom nachgegangen. Hierzu wurde zunächst eine Analyse der Domänen des Vacuolin B durchgeführt, das als bisher spätester bekannter Marker im Endocytoseweg in Dictyostelium discoideum das neutrale, postlysosomale Kompartiment dekoriert. In einer Yeast Two Hybrid-Analyse wurden die Bereiche des Vacuolin B identifiziert, die für eine Selbst-Interaktion des Proteins notwendig und ausreichend sind. Es handelt sich dabei um die coiled-coil-Domäne und einen daran anschließenden, 18 Aminosäuren langen, alpha-helicalen Abschnitt. Diesem helicalen Bereich scheint die Funktion einer modifizierenden, die coiled-coil-Ausbildung vermittelnden oder initiierenden Faltungseinheit zuzukommen. Sie weist jedoch nicht die typischen Merkmale einer trigger-Helix auf. Lokalisationsuntersuchungen mit GFP-Deletionskonstrukten zeigten, dass es einen Zusammenhang zwischen Interaktionsfähigkeit und Bindung des Vacuolin an die Oberfläche später Endosomen gibt: Eine korrekte Lokalisation und Membranassoziation waren nur dann zu beobachten, wenn in der Yeast Two Hybrid-Analyse eine Interaktion nachgewiesen werden konnte. Es wurden die für die Lokalisation und Assoziation mit der vacuolären Membran notwendigen Sequenzbereiche identifiziert; diese waren jedoch nicht hinreichend. Vermutlich sind hierfür auch Sequenzen des N-Terminus notwendig. Die erhobenen Daten legen weiterhin eine Bedeutung der hydrophoben Domäne des Vacuolin B für die korrekte Faltung des Proteins nahe. Im Anschluss an die Domänenanalyse wurde Vacuolin dazu benutzt, durch Herstellung von Hybridproteinen Actin-interagierende Proteine gezielt an das späte Endosom zu transportieren. Es wurde deren Einfluss auf den lokalen Actin Coat und den endocytotischen Transit untersucht. Zwei Actin-bindende Proteine mit depolymerisierender Wirkung konnten im Rahmen dieser Arbeit getestet werden, nämlich Severin und Cofilin. Die Schwächung des lokalen Actin Coats durch das Vorhandensein von Severin an der späten Vacuole war nicht eindeutig festzustellen. Severin am Postlysosom führte nicht zu einer Veränderung der Transitkinetik von Flüssigphasenmarker. Allerdings konnte ein Defekt in der Phagocytose festgestellt werden. Es könnte hierbei ein Zusammenhang zwischen der Mobilisierung von intrazellulärem Calcium während der Partikelaufnahme und der Calcium-abhängigen Regulation der Severin-Aktivität bestehen. Das Hybridprotein aus Vacuolin und Cofilin zeigte neben einer Assoziation mit der vacuolären Membran auch eine Lokalisation im Cytoplasma und Cortex der Zellen. Mit der Lokalisation im Cytoplasma und Cortex korrelierte eine Veränderung der endocytotischen Aktivität. Das Vacuolin-Cofilin-Fusionsprotein am Postlysosom rief einen Verlust des lokalen Actin Coats hervor. Dies führte zu einer traubenförmigen Assoziation der späten Endosomen; exocytotische Parameter blieben jedoch unbeeinflusst. Aufgrund der hier erhobenen Daten kann vermutet werden, dass der Actin Coat am Postlysosom dazu dient, eine Agglutination dieser Endosomen zu inhibieren. Dies könnte ein Schutzmechanismus zum Ausschluss von Docking- und Fusionsereignissen sein.

On the function of the Dictyostelium Argonaute A protein (AgnA) in epigenetic gene regulation

With molecular biology methods and bioinformatics, the Argonaute proteins in Dictyostelium discoideum were characterized, and the function of the AgnA protein in RNAi and DNA methylation was investigated, as well as cellular features. Also interaction partners of the PAZ-Piwi domain of AgnA (PAZ-PiwiAgnA) were discovered. The Dictyostelium genome encodes five Argonaute proteins, termed AgnA/B/C/D/E. The expression level of Argonaute proteins was AgnB/D/E > AgnA > AgnC. All these proteins contain the characteristic conserved of PAZ and Piwi domains. Fluorescence microscopy revealed that the overexpressed C-terminal GFP-fusion of PAZ-PiwiAgnA (PPWa-GFP) localized to the cytoplasm. Overexpression of PPWa-GFP leaded to an increased gene silencing efficiency mediated by RNAi but not by antisense RNA. This indicated that PAZ-PiwiAgnA is involved in the RNAi pathway, but not in the antisense pathway. An analysis of protein-protein interactions by a yeast-two-hybrid screen on a cDNA library from vegetatively grown Dictyostelium revealed that several proteins, such as EF2, EF1-I, IfdA, SahA, SamS, RANBP1, UAE1, CapA, and GpdA could interact with PAZ-PiwiAgnA. There was no interaction between PAZ-PiwiAgnA and HP1, HelF and DnmA detected by direct yeast-two-hybrid analysis. The fluorescence microscopy images showed that the overexpressed GFP-SahA or IfdA fusion proteins localized to both cytoplasm and nuclei, while the overexpressed GFP-SamS localized to the cytoplasm. The expression of SamS in AgnA knock down mutants was strongly down regulated on cDNA and mRNA level in, while the expression of SahA was only slightly down regulated. AgnA knock down mutants displayed defects in growth and phagocytosis, which suggested that AgnA affects also cell biological features. The inhibition of DNA methylation on DIRS-1 and Skipper retroelements, as well as the endogenous mvpB and telA gene, observed for the same strains, revealed that AgnA is involved in the DNA methylation pathway. Northern blot analysis showed that Skipper and DIRS-1 were rarely expressed in Ax2, but the expression of Skipper was upregulated in AgnA knock down mutants, while the expression of DIRS-1 was not changed. A knock out of the agnA gene failed even though the homologous recombination of the disruption construct occurred at the correct site, which indicated that there was a duplication of the agnA gene in the genome. The same phenomenon was also observed in ifdA knock out experiments.

DNA methylation in Dictyostelium discoideum

DNA methyltransferases of type Dnmt2 are a highly conserved protein family with enigmatic function. The aim of this work was to characterize DnmA, the Dnmt2 methyltransferase in Dictyostelium discoideum, and further to investigate its implication in DNA methylation and transcriptional gene silencing. The genome of the social amoeba Dictyostelium encodes DnmA as the sole DNA methyltransferase. The enzyme bears all ten characteristic DNA methyltransferase motifs in its catalytic domain. The DnmA mRNA was found by RT-PCR to be expressed during vegetative growth and down regulated during development. Investigations using fluorescence microscopy showed that both DnmA-myc and DnmA-GFP fusions predominantly localised to the nucleus. The function of DnmA remained initially unclear, but later experiment revealed that the enzyme is an active DNA methyltransferase responsible for all DNA (cytosine) methylation in Dictyostelium. Neither in gel retardation assays, nor by the yeast two hybrid system, clues on the functionality of DnmA could be obtained. However, immunological detection of the methylation mark with an α - 5mC antibody gave initial evidence that the DNA of Dictyostelium was methylated. Furthermore, addition of 5-aza-cytidine as demethylating agent to the Dictyostelium medium and subsequent in vitro incubation of the DNA isolated from these cells with recombinant DnmA showed that the enzyme binds slightly better to this target DNA. In order to investigate further the function of the protein, a gene knock-out for dnmA was generated. The gene was successfully disrupted by homologous recombination, the knock-out strain, however, did not show any obvious phenotype under normal laboratory conditions. To identify specific target sequences for DNA methylation, a microarray analysis was carried out. Setting a threshold of at least 1.5 fold for differences in the strength of gene expression, several such genes in the knock-out strain were chosen for further investigation. Among the up-regulated genes were the ESTs representing the gag and the RT genes respectively of the retrotransposon skipper. In addition Northern blot analysis confirmed the up-regulation of skipper in the DnmA knock-out strain. Bisufite treatment and sequencing of specific DNA stretches from skipper revealed that DnmA is responsible for methylation of mostly asymmetric cytosines. Together with skipper, DIRS-1 retrotransposon was found later also to be methylated but was not present on the microarray. Furthermore, skipper transcription was also up-regulated in strains that had genes disrupted encoding components of the RNA interference pathway. In contrast, DIRS 1 expression was not affected by a loss of DnmA but was strongly increased in the strain that had the RNA directed RNA polymerase gene rrpC disrupted. Strains generated by propagating the usual wild type Ax2 and the DnmA knock-out cells over 16 rounds in development were analyzed for transposon activity. Northern blot analysis revealed activation for skipper expression, but not for DIRS-1. A large number of siRNAs were found to be correspondent to the DIRS-1 sequence, suggesting concerted regulation of DIRS-1 expression by RNAi and DNA methylation. In contrast, no siRNAs corresponding to the standard skipper element were found. The data show that DNA methylation plays a crucial role in epigenetic gene regulation in Dictyostelium and that different, partially overlapping mechanisms control transposon silencing for skipper and DIRS-1. To elucidate the mechanism of targeting the protein to particular genes in the Dictyostelium genome, some more genes which were up-regulated in the DnmA knock-out strain were analyzed by bisulfite sequencing. The chosen genes are involved in the multidrug response in other species, but their function in Dictyostelium is uncertain. Bisulfite data showed that two of these genes were methylated at asymmetrical C-residues in the wild type, but not in DnmA knock-out cells. This suggested that DNA methylation in Dictyostelium is involved not only in transposon regulation but also in transcriptional silencing of specific genes.

Das ER-lokalisierte Protein Farinelli und seine möglichen Interaktionspartner in der Spermatogenese von Drosophila melanogaster

Dem Farinelli-Protein wird eine Funktion als hodenspezifisches VAP-Protein zugesprochen (Renner, 2001). Mit Hilfe des ER-Markers PDI konnte Fan eindeutig dem ER zugeordnet werden. Fan stellt dabei ein integrales Membranprotein dar, welches nur durch Detergenz- Behandlung in Lösung zu bringen war. Durch den Einsatz zweier Fragment-Konstrukte (fan∆MSP-GFP und fanMSP-GFP) von Fan wurde die Relevanz der MSP-Domäne für die männliche Fertilität dokumentiert. Das Fusionsprotein Fan∆MSP-GFP lag aufgrund der verbliebenen Transmembrandomäne weiterhin im ER vor. Dennoch konnte der sterile Phänotyp der fanJo-Männchen, die keinerlei Fan-Protein enthalten, durch das Einbringen des Fusionskonstrukts nicht gerettet werden. MSP-GFP für sich allein konnte keine Verbindung mit dem ER eingehen und zeigte eine diffuse Fluoreszenz. Im Rahmen der Dissertation wurden mehrere, durch das yeast two hybrid-System ermittelte, mögliche Interaktionspartner von Fan analysiert. Das Protein CG5194 konnte als einziges wie Fan dem ER zugeordnet werden. Seine Expression beschränkte sich aber auf die Spermatocytenphase und ist somit kürzer als die von Farinelli. Nach Einkreuzen der GFP-Fusionskonstrukte in die fan-Nullmutante konnte CG5194 nicht mehr am ER der Spermatocyten beobachtet werden, sondern lag innerhalb des Cytoplasmas diffus verteilt vor. Auch bei der Western Blot-Analyse konnte das Protein von CG5194 nur noch in der Überstand-Fraktion mit den ungebundenen Proteinen nachgewiesen werden. Lag in der fan-Nullmutante ausschließlich das Fan∆MSP-GFP-Fusionsprotein vor, konnte die ER-Lokalisation von CG5194 ebenfalls nicht beibehalten werden. Mit Hilfe einer Fragment-Analyse konnte gezeigt werden, dass in den männlichen Gonaden das erste Exon von CG5194 für die Interaktion mit Fan entscheidend ist. Innerhalb der Ovarien dagegen ist das zweite Exon für die Lokalisation im ER notwendig. Demzufolge ist neben einem anderen Interaktionspartner als Fan auch eine andere Domäne im Protein für die ER-Lokalisation in der weiblichen Keimbahn entscheidend. Durch den Einsatz von antisense- und RNAi-Konstrukten konnte ein steriler Phänotyp bei den Männchen erzeugt werden. Überraschenderweise zeigten die Tiere erst einen Defekt während der Spermatiden-Differenzierung. Bereits während der Diplomarbeit wurde 98A im Kopfbereich der elongierten Spermatiden nachgewiesen. Mittels einer DNA-Färbung sowie durch die Colokalisation mit dem Akrosom-Protein Sneaky wurde 98A dem Bereich des Akrosoms zugeordnet. Sneaky taucht jedoch bereits früher als 98A in den Keimzellen auf. Die Erzeugung eines sterilen Phänotyps durch den Einfluss eines RNAi-Konstrukts gelang nicht. Entweder ist 98A für die Fertilität von Drosophila nicht relevant oder aber seine Funktion kann von anderen Proteinen übernommen werden.

Untersuchungen zur Rolle von Isoformen katalytischer Untereinheiten der PKA

ZUSAMMENFASSUNG: Proteinkinasen übernehmen zentrale Aufgaben in der Signaltransduktion höherer Zellen. Dabei ist die cAMP-abhängige Proteinkinase (PKA) bezüglich ihrer Struktur und Funktion eine der am besten charakterisierten Proteinkinasen. Trotzdem ist wenig über direkte Interaktionspartner der katalytischen Untereinheiten (PKA-C) bekannt. In einem Split-Ubiquitin basiertem Yeast Two Hybrid- (Y2H-)System wurden potenzielle Interaktionspartner der PKA-C identifiziert. Als Bait wurden sowohl die humane Hauptisoform Cα (hCα) als auch die Proteinkinase X (PrKX) eingesetzt. Nach der Bestätigung der Funktionalität der PKA-C-Baitproteine, dem Nachweis der Expression und der Interaktion mit dem bekannten Interaktionspartner PKI wurde ein Y2H-Screen gegen eine Mausembryo-cDNA-Expressionsbibliothek durchgeführt. Von 2*10^6 Klonen wurden 76 Kolonien isoliert, die ein mit PrKX interagierendes Preyprotein exprimierten. Über die Sequenzierung der enthaltenen Prey-Vektoren wurden 25 unterschiedliche, potenzielle Interaktionspartner identifiziert. Für hCα wurden über 2*10^6 S. cerevisiae-Kolonien untersucht, von denen 1.959 positiv waren (1.663 unter erhöhter Stringenz). Über die Sequenzierung von ca. 10% der Klone (168) konnten Sequenzen für 67 verschiedene, potenzielle Interaktionspartner der hCα identifiziert werden. 15 der Preyproteine wurden in beiden Screens identifiziert. Die PKA-C-spezifische Wechselwirkung der insgesamt 77 Preyproteine wurde im Bait Dependency Test gegen largeT, ein Protein ohne Bezug zum PKA-System, untersucht. Aus den PKA-C-spezifischen Bindern wurden die löslichen Preyproteine AMY-1, Bax72-192, Fabp3, Gng11, MiF, Nm23-M1, Nm23-M2, Sssca1 und VASP256-375 für die weitere in vitro-Validierung ausgewählt. Die Interaktion von FLAG-Strep-Strep-hCα (FSS-hCα) mit den über Strep-Tactin aus der rekombinanten Expression in E. coli gereinigten One-STrEP-HA-Proteinen (SSHA-Proteine) wurde über Koimmunpräzipitation für SSHA-Fabp3, -Nm23-M1, -Nm23-M2, -Sssca1 und -VASP256-375 bestätigt. In SPR-Untersuchungen, für die hCα kovalent an die Oberfläche eines CM5-Sensorchips gekoppelt wurde, wurden die ATP/Mg2+-Abhängigkeit der Bindungen sowie differentielle Effekte der ATP-kompetitiven Inhibitoren H89 und HA-1077 untersucht. Freie hCα, die vor der Injektion zu den SSHA-Proteinen gegeben wurde, kompetierte im Gegensatz zu FSS-PrKX die Bindung an die hCα-Oberfläche. Erste kinetische Analysen lieferten Gleichgewichtsdissoziationskonstanten im µM- (SSHA-Fabp3, -Sssca1), nM- (SSHA-Nm23-M1, –M2) bzw. pM- (SSHA-VASP256-375) Bereich. In funktionellen Analysen konnte eine Phosphorylierung von SSHA-Sssca1 und VASP256-375 durch hCα und FSS-PrKX im Autoradiogramm nachgewiesen werden. SSHA-VASP256-375 zeigte zudem eine starke Inhibition von hCα im Mobility Shift-Assay. Dieser inhibitorische Effekt sowie die hohe Affinität konnten jedoch auf eine Kombination aus der Linkersequenz des Vektors und dem N-Terminus von VASP256-375 zurückgeführt werden. Über die Wechselwirkungen der hier identifizierten Interaktionspartner Fabp3, Nm23-M1 und Nm23-M2 mit hCα können in Folgeuntersuchungen neue PKA-Funktionen insbesondere im Herzen sowie während der Zellmigration aufgedeckt werden. Sssca1 stellt dagegen ein neues, näher zu charakterisierendes PKA-Substrat dar.

Modelling and simulation of a photovoltaic fuel cell hybrid system

A stand-alone power system is an autonomous system that supplies electricity to the user load without being connected to the electric grid. This kind of decentralized system is frequently located in remote and inaccessible areas. It is essential for about one third of the world population which are living in developed or isolated regions and have no access to an electricity utility grid. The most people live in remote and rural areas, with low population density, lacking even the basic infrastructure. The utility grid extension to these locations is not a cost effective option and sometimes technically not feasible. The purpose of this thesis is the modelling and simulation of a stand-alone hybrid power system, referred to as “hydrogen Photovoltaic-Fuel Cell (PVFC) hybrid system”. It couples a photovoltaic generator (PV), an alkaline water electrolyser, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to give different system topologies. The system is intended to be an environmentally friendly solution since it tries maximising the use of a renewable energy source. Electricity is produced by a PV generator to meet the requirements of a user load. Whenever there is enough solar radiation, the user load can be powered totally by the PV electricity. During periods of low solar radiation, auxiliary electricity is required. An alkaline high pressure water electrolyser is powered by the excess energy from the PV generator to produce hydrogen and oxygen at a pressure of maximum 30bar. Gases are stored without compression for short- (hourly or daily) and long- (seasonal) term. A proton exchange membrane (PEM) fuel cell is used to keep the system’s reliability at the same level as for the conventional system while decreasing the environmental impact of the whole system. The PEM fuel cell consumes gases which are produced by an electrolyser to meet the user load demand when the PV generator energy is deficient, so that it works as an auxiliary generator. Power conditioning units are appropriate for the conversion and dispatch the energy between the components of the system. No batteries are used in this system since they represent the weakest when used in PV systems due to their need for sophisticated control and their short lifetime. The model library, ISET Alternative Power Library (ISET-APL), is designed by the Institute of Solar Energy supply Technology (ISET) and used for the simulation of the hybrid system. The physical, analytical and/or empirical equations of each component are programmed and implemented separately in this library for the simulation software program Simplorer by C++ language. The model parameters are derived from manufacturer’s performance data sheets or measurements obtained from literature. The identification and validation of the major hydrogen PVFC hybrid system component models are evaluated according to the measured data of the components, from the manufacturer’s data sheet or from actual system operation. Then, the overall system is simulated, at intervals of one hour each, by using solar radiation as the primary energy input and hydrogen as energy storage for one year operation. A comparison between different topologies, such as DC or AC coupled systems, is carried out on the basis of energy point of view at two locations with different geographical latitudes, in Kassel/Germany (Europe) and in Cairo/Egypt (North Africa). The main conclusion in this work is that the simulation method of the system study under different conditions could successfully be used to give good visualization and comparison between those topologies for the overall performance of the system. The operational performance of the system is not only depending on component efficiency but also on system design and consumption behaviour. The worst case of this system is the low efficiency of the storage subsystem made of the electrolyser, the gas storage tank, and the fuel cell as it is around 25-34% at Cairo and 29-37% at Kassel. Therefore, the research for this system should be concentrated in the subsystem components development especially the fuel cell.

Development of hybrid UV VCSEL with organic active material and dielectric DBR mirrors for medical, sensoric and data storage applications

Lasers play an important role for medical, sensoric and data storage devices. This thesis is focused on design, technology development, fabrication and characterization of hybrid ultraviolet Vertical-Cavity Surface-Emitting Lasers (UV VCSEL) with organic laser-active material and inorganic distributed Bragg reflectors (DBR). Multilayer structures with different layer thicknesses, refractive indices and absorption coefficients of the inorganic materials were studied using theoretical model calculations. During the simulations the structure parameters such as materials and thicknesses have been varied. This procedure was repeated several times during the design optimization process including also the feedback from technology and characterization. Two types of VCSEL devices were investigated. The first is an index coupled structure consisting of bottom and top DBR dielectric mirrors. In the space in between them is the cavity, which includes active region and defines the spectral gain profile. In this configuration the maximum electrical field is concentrated in the cavity and can destroy the chemical structure of the active material. The second type of laser is a so called complex coupled VCSEL. In this structure the active material is placed not only in the cavity but also in parts of the DBR structure. The simulations show that such a distribution of the active material reduces the required pumping power for reaching lasing threshold. High efficiency is achieved by substituting the dielectric material with high refractive index for the periods closer to the cavity. The inorganic materials for the DBR mirrors have been deposited by Plasma- Enhanced Chemical Vapor Deposition (PECVD) and Dual Ion Beam Sputtering (DIBS) machines. Extended optimizations of the technological processes have been performed. All the processes are carried out in a clean room Class 1 and Class 10000. The optical properties and the thicknesses of the layers are measured in-situ by spectroscopic ellipsometry and spectroscopic reflectometry. The surface roughness is analyzed by atomic force microscopy (AFM) and images of the devices are taken with scanning electron microscope (SEM). The silicon dioxide (SiO2) and silicon nitride (Si3N4) layers deposited by the PECVD machine show defects of the material structure and have higher absorption in the ultra violet range compared to ion beam deposition (IBD). This results in low reflectivity of the DBR mirrors and also reduces the optical properties of the VCSEL devices. However PECVD has the advantage that the stress in the layers can be tuned and compensated, in contrast to IBD at the moment. A sputtering machine Ionsys 1000 produced by Roth&Rau company, is used for the deposition of silicon dioxide (SiO2), silicon nitride (Si3N4), aluminum oxide (Al2O3) and zirconium dioxide (ZrO2). The chamber is equipped with main (sputter) and assisted ion sources. The dielectric materials were optimized by introducing additional oxygen and nitrogen into the chamber. DBR mirrors with different material combinations were deposited. The measured optical properties of the fabricated multilayer structures show an excellent agreement with the results of theoretical model calculations. The layers deposited by puttering show high compressive stress. As an active region a novel organic material with spiro-linked molecules is used. Two different materials have been evaporated by utilizing a dye evaporation machine in the clean room of the department Makromolekulare Chemie und Molekulare Materialien (mmCmm). The Spiro-Octopus-1 organic material has a maximum emission at the wavelength λemission = 395 nm and the Spiro-Pphenal has a maximum emission at the wavelength λemission = 418 nm. Both of them have high refractive index and can be combined with low refractive index materials like silicon dioxide (SiO2). The sputtering method shows excellent optical quality of the deposited materials and high reflection of the multilayer structures. The bottom DBR mirrors for all VCSEL devices were deposited by the DIBS machine, whereas the top DBR mirror deposited either by PECVD or by combination of PECVD and DIBS. The fabricated VCSEL structures were optically pumped by nitrogen laser at wavelength λpumping = 337 nm. The emission was measured by spectrometer. A radiation of the VCSEL structure at wavelength 392 nm and 420 nm is observed.

Economics of Hybrid Photovoltaic Power Plants

The global power supply stability is faced to several severe and fundamental threats, in particular steadily increasing power demand, diminishing and degrading fossil and nuclear energy resources, very harmful greenhouse gas emissions, significant energy injustice and a structurally misbalanced ecological footprint. Photovoltaic (PV) power systems are analysed in various aspects focusing on economic and technical considerations of supplemental and substitutional power supply to the constraint conventional power system. To infer the most relevant system approach for PV power plants several solar resources available for PV systems are compared. By combining the different solar resources and respective economics, two major PV systems are identified to be very competitive in almost all regions in the world. The experience curve concept is used as a key technique for the development of scenario assumptions on economic projections for the decade of the 2010s. Main drivers for cost reductions in PV systems are learning and production growth rate, thus several relevant aspects are discussed such as research and development investments, technical PV market potential, different PV technologies and the energetic sustainability of PV. Three major market segments for PV systems are identified: off-grid PV solutions, decentralised small scale on-grid PV systems (several kWp) and large scale PV power plants (tens of MWp). Mainly by application of ‘grid-parity’ and ‘fuel-parity’ concepts per country, local market and conventional power plant basis, the global economic market potential for all major PV system segments is derived. PV power plant hybridization potential of all relevant power technologies and the global power plant structure are analyzed regarding technical, economical and geographical feasibility. Key success criteria for hybrid PV power plants are discussed and comprehensively analysed for all adequate power plant technologies, i.e. oil, gas and coal fired power plants, wind power, solar thermal power (STEG) and hydro power plants. For the 2010s, detailed global demand curves are derived for hybrid PV-Fossil power plants on a per power plant, per country and per fuel type basis. The fundamental technical and economic potentials for hybrid PV-STEG, hybrid PV-Wind and hybrid PV-Hydro power plants are considered. The global resource availability for PV and wind power plants is excellent, thus knowing the competitive or complementary characteristic of hybrid PV-Wind power plants on a local basis is identified as being of utmost relevance. The complementarity of hybrid PV-Wind power plants is confirmed. As a result of that almost no reduction of the global economic PV market potential need to be expected and more complex power system designs on basis of hybrid PV-Wind power plants are feasible. The final target of implementing renewable power technologies into the global power system is a nearly 100% renewable power supply. Besides balancing facilities, storage options are needed, in particular for seasonal power storage. Renewable power methane (RPM) offers respective options. A comprehensive global and local analysis is performed for analysing a hybrid PV-Wind-RPM combined cycle gas turbine power system. Such a power system design might be competitive and could offer solutions for nearly all current energy system constraints including the heating and transportation sector and even the chemical industry. Summing up, hybrid PV power plants become very attractive and PV power systems will very likely evolve together with wind power to the major and final source of energy for mankind.

Hybrid optimization schemes for quantum control

Optimal control theory is a powerful tool for solving control problems in quantum mechanics, ranging from the control of chemical reactions to the implementation of gates in a quantum computer. Gradient-based optimization methods are able to find high fidelity controls, but require considerable numerical effort and often yield highly complex solutions. We propose here to employ a two-stage optimization scheme to significantly speed up convergence and achieve simpler controls. The control is initially parametrized using only a few free parameters, such that optimization in this pruned search space can be performed with a simplex method. The result, considered now simply as an arbitrary function on a time grid, is the starting point for further optimization with a gradient-based method that can quickly converge to high fidelities. We illustrate the success of this hybrid technique by optimizing a geometric phase gate for two superconducting transmon qubits coupled with a shared transmission line resonator, showing that a combination of Nelder-Mead simplex and Krotov’s method yields considerably better results than either one of the two methods alone.