Low-Cost Micromechanically Tunable Optical Devices: Strained Resonator Engineering, Technological Implementation and Characterization

The rapid growth of the optical communication branches and the enormous demand for more bandwidth require novel networks such as dense wavelength division multiplexing (DWDM). These networks enable higher bitrate transmission using the existing optical fibers. Micromechanically tunable optical microcavity devices like VCSELs, Fabry-Pérot filters and photodetectors are core components of these novel DWDM systems. Several air-gap based tunable devices were successfully implemented in the last years. Even though these concepts are very promising, two main disadvantages are still remaining. On the one hand, the high fabrication and integration cost and on the other hand the undesired adverse buckling of the suspended membranes. This thesis addresses these two problems and consists of two main parts: • PECVD dielectric material investigation and stress control resulting in membranes shape engineering. • Implementation and characterization of novel tunable optical devices with tailored shapes of the suspended membranes. For this purposes, low-cost PECVD technology is investigated and developed in detail. The macro- and microstress of silicon nitride and silicon dioxide are controlled over a wide range. Furthermore, the effect of stress on the optical and mechanical properties of the suspended membranes and on the microcavities is evaluated. Various membrane shapes (concave, convex and planar) with several radii of curvature are fabricated. Using this resonator shape engineering, microcavity devices such as non tunable and tunable Fabry-Pérot filters, VCSELs and PIN photodetectors are succesfully implemented. The fabricated Fabry-Pérot filters cover a spectral range of over 200nm and show resonance linewidths down to 1.5nm. By varying the stress distribution across the vertical direction within a DBR, the shape and the radius of curvature of the top membrane are explicitely tailored. By adjusting the incoming light beam waist to the curvature, the fundamental resonant mode is supported and the higher order ones are suppressed. For instance, a tunable VCSEL with 26 nm tuning range, 400µW maximal output power, 47nm free spectral range and over 57dB side mode suppresion ratio (SMSR) is demonstrated. Other technologies, such as introducing light emitting organic materials in microcavities are also investigated.

Optimization in the Technological Steps for the Fabrication of Large Area Micromirror Arrays

Micromirror arrays are a very strong candidate for future energy saving applications. Within this work, the fabrication process for these micromirror arrays has been optimized and some steps for the large area fabrication of micromirror modules were performed. At first the surface roughness of the insulation layer of silicon dioxide (SiO2) was investigated. This SiO2 thin layer was deposited on three different type of substrates i.e. silicon, glass and Polyethylene Naphthalate (PEN) substrates. The deposition techniques which has been used are Plasma Enhanced Chemical Vapor Deposition (PECVD), Physical Vapor Deposition (PVD) and Ion Beam Sputter Deposition (IBSD). The thickness of the SiO2 thin layer was kept constant at 150nm for each deposition process. The surface roughness was measured by Stylus Profilometry and Atomic Force Microscopy (AFM). It was found that the layer which was deposited by IBSD has got the minimum surface roughness value and the layer which was deposited by PECVD process has the highest surface roughness value. During the same investigation, the substrate temperature of PECVD was varied from 80° C to 300° C with the step size of 40° C and it was found that the surface roughness keeps on increasing as the substrate holder temperature increases in the PECVD process. A new insulation layer system was proposed to minimize the dielectric breakdown effect in insulation layer for micromirror arrays. The conventional bilayer system was replaced by five layer system but the total thickness of insulation layer remains the same. It was found that during the actuation of micromirror arrays structure, the dielectric breakdown effect was reduced considerably as compared to the bilayer system. In the second step the fabrication process of the micromirror arrays was successfully adapted and transferred from glass substrates to the flexible PEN substrates by optimizing the conventional process recipe. In the last section, a large module of micromirror arrays was fabricated by electrically interconnecting four 10cm×10cm micromirror modules on a glass pane having dimensions of 21cm×21cm.

Core Labor Rights

The working paper’s main objective is to explore the extent to which non-compliance to international labor rights is caused by global competition. From the perspective of institutional economics, compliance with core labor rights is beneficial for sustainable development. Nonetheless, violations of these rights occur on a massive scale. The violators usually blame competitive pressures. A number of studies have come to the conclusion that non-compliance does not provide for a competitive edge, thereby denying any economic rationale for non-compliance. While we sympathize with this conclusion, we find that these studies suffer from faulty assumptions in the design of their regression analyses. The assumption of perfect markets devoid of power relations is particularly unrealistic. While workers' rights promise long-term benefits, they may incur short-term production cost increases. On the supply side, the production sites with the highest amount of labor rights violations are characterized by a near perfect competitive situation. The demand side, however, is dominated by an oligopoly of brand name companies and large retailers. Facing a large pool of suppliers, these companies enjoy more bargaining power. Developing countries, the hosts to most of these suppliers, are therefore limited in their ability to raise labor standards on their own. This competitive situation, however, is the very reason why labor rights have to be negotiated internationally. Our exploration starts with an outline of the institutionalist argument of the benefits of core labor rights. Second, we briefly examine some cross-country empirical studies on the impact of trade liberalization (as a proxy for competitive pressures). Third, we develop our own argument which differentiates the impact of trade liberalization along the axes of labor- and capital-intensive production as well as low and medium skill production. Finally, we present evidence from a study on the impact of trade liberalization in Indonesia on the garment industry as an example of a low skill, laborintensive industry on the one hand, and the automobile as an example for a medium skill, capital-intensive industry on the other hand. Because the garment industry’s workforce consists mainly of women, we also discuss the gender dimension of trade liberalization.