Systematic multi-configuration calculations on structures and properties of complex atoms

Die relativistische Multikonfigurations Dirac-Fock (MCDF) Methode ist gegenwärtig eines der am häufigsten benutzten Verfahren zur Berechnung der elektronischen Struktur und der Eigenschaften freier Atome. In diesem Verfahren werden die Wellenfunktionen ausgewählter atomarer Zustände als eine Linearkombination von sogenannten Konfigurationszuständen (CSF - Configuration State Functions) konstruiert, die in einem Teilraum des N-Elektronen Hilbert-Raumes eine (Vielteilchen-)Basis aufspannen. Die konkrete Konstruktion dieser Basis entscheidet letzlich über die Güte der Wellenfunktionen, die üblicherweise mit Hilfe einer Variation des Erwartungswertes zum no-pair Dirac-Coulomb Hamiltonoperators gewonnen werden. Mit Hilfe von MCDF Wellenfunktionen können die dominanten relativistischen und Korrelationseffekte in freien Atomen allgemein recht gut erfaßt und verstanden werden. Außer der instantanen Coulombabstoßung zwischen allen Elektronenpaaren werden dabei auch die relativistischen Korrekturen zur Elektron-Elektron Wechselwirkung, d.h. die magnetischen und Retardierungsbeiträge in der Wechselwirkung der Elektronen untereinander, die Ankopplung der Elektronen an das Strahlungsfeld sowie der Einfluß eines ausgedehnten Kernmodells erfaßt. Im Vergleich mit früheren MCDF Rechnungen werden in den in dieser Arbeit diskutierten Fallstudien Wellenfunktionsentwicklungen verwendet, die um 1-2 Größenordnungen aufwendiger sind und daher systematische Untersuchungen inzwischen auch an Atomen mit offenen d- und f-Schalen erlauben. Eine spontane Emission oder Absorption von Photonen kann bei freien Atomen theoretisch am einfachsten mit Hilfe von Übergangswahrscheinlichkeiten erfaßt werden. Solche Daten werden heute in vielen Forschungsbereichen benötigt, wobei neben den traditionellen Gebieten der Fusionsforschung und Astrophysik zunehmend auch neue Forschungsrichtungen (z.B. Nanostrukturforschung und Röntgenlithographie) zunehmend ins Blickfeld rücken. Um die Zuverlässigkeit unserer theoretischen Vorhersagen zu erhöhen, wurde in dieser Arbeit insbesondere die Relaxation der gebundenen Elektronendichte, die rechentechnisch einen deutlich größeren Aufwand erfordert, detailliert untersucht. Eine Berücksichtigung dieser Relaxationseffekte führt oftmals auch zu einer deutlich besseren Übereinstimmung mit experimentellen Werten, insbesondere für dn=1 Übergänge sowie für schwache und Interkombinationslinien, die innerhalb einer Hauptschale (dn=0) vorkommen. Unsere in den vergangenen Jahren verbesserten Rechnungen zu den Wellenfunktionen und Übergangswahrscheinlichkeiten zeigen deutlich den Fortschritt bei der Behandlung komplexer Atome. Gleichzeitig kann dieses neue Herangehen künftig aber auch auf (i) kompliziertere Schalensstrukturen, (ii) die Untersuchung von Zwei-Elektronen-ein-Photon (TEOP) Übergängen sowie (iii) auf eine Reihe weiterer atomarer Eigenschaften übertragen werden, die bekanntermaßen empflindlich von der Relaxation der Elektronendichte abhängen. Dies sind bspw. Augerzerfälle, die atomare Photoionisation oder auch strahlende und dielektronische Rekombinationsprozesse, die theoretisch bisher nur selten überhaupt in der Dirac-Fock Näherung betrachtet wurden.

Factors and mechanisms controlling soil organic carbon turnover in subsoils of agricultural sites

Two-third of the terrestrial C is stored in soils, and more than 50% of soil organic C (SOC) is stored in subsoils from 30 – 100 cm. Hence, subsoil is important as a source or sink for CO2 in the global carbon cycle. Especially the stable organic carbon (OC) is stored in subsoil, as several studies have shown that subsoil OC is of a higher average age than topsoil OC. However, there is still a lack of knowledge regarding the mechanisms of C sequestration and C turnover in subsoil. Three main factors are discussed, which possibly reduce carbon turnover rates in subsoil: Resource limitation, changes in the microbial community, and changes in gas conditions. The experiments conducted in this study, which aimed to elucidate the importance of the mentioned factors, focused on two neighbouring arable sites, with depth profiles differing in SOC stocks: One Colluvic Cambisol (Cam) with high SOC contents (8-12 g kg-1) throughout the profile and one Haplic Luvisol (Luv) with low SOC contents (3-4 g kg-1) below 30 cm depth. The first experiment was designed to gain more knowledge regarding the microbial community and its influence on carbon sequestration in subsoil. Soil samples were taken at four different depths on the two sites. Microbial biomass C (MBC) was determined to identify depth gradients in relation to the natural C availability. Bacterial and fungal residues as well as ergosterol were determined to quantify changes in the in the microbial community composition. Multi-substrate-induced-respiration (MSIR) was used to identify shifts in functional diversity of the microbial community. The MSIR revealed that substrate use in subsoil differed significantly from that in topsoil and also differed highly between the two subsoils, indicating a strong influence of resource limitations on microbial substrate use. Amino sugar analysis and the ratio of ergosterol to microbial biomass C showed that fungal dominance decreased with depth. The results clearly demonstrated that microbial parameters changed with depth according to substrate availability. The second experiment was an incubation experiment using subsoil gas conditions with and without the addition of C4 plant residues. Soil samples were taken from topsoil and subsoil of the two sites. SOC losses during the incubation, were not influenced by the subsoil gas conditions. Plant-derived C losses were generally stronger in the Cam (7.5 mg g-1), especially at subsoil gas conditions, than in the Luv (7.0 mg g-1). Subsoil gas conditions had no general effects on microbial measures with and without plant residue addition. However, the contribution of plant-derived MBC to total MBC was significantly reduced at subsoil gas conditions. This lead to the conclusion that subsoil gas conditions alter the metabolism of microorganisms but not the degradation of added plant residues is general. The third experiment was a field experiment carried out for two years. Mesh bags containing original soil material and maize root residues (C4 plant) were buried at three different depths at the two sites. The recovery of the soilbags took place 12, 18, and 24 months after burial. We determined the effects of these treatments on SOC, density fractions, and MBC. The mean residence time for maize-derived C was similar at all depths and both sites (403 d). MBC increased to a similar extent (2.5 fold) from the initial value to maximum value. This increase relied largely on the added maize root residues. However, there were clear differences visible in terms of the substrate use efficiency, which decreased with depth and was lower in the Luv than in the Cam. Hence freshly added plant material is highly accessible to microorganisms in subsoil and therefore equally degraded at both sites and depths, but its metabolic use was determined by the legacy of soil properties. These findings provide strong evidence that resource availability from autochthonous SOM as well as from added plant residues have a strong influence on the microbial community and its use of different substrates. However, under all of the applied conditions there was no evidence that complex substrates, i.e. plant residues, were less degraded in subsoil than in topsoil.

Mechanisms of residue mulch-induced cereal growth increases in West Africa

The use of crop residues (CR) has been widely reported as a means of increasing crop yields across West Africa. However, little has been done to compare the magnitude and mechanisms of CR effects systematically in the different agro-ecological zones of the region. To this end, a series of field trials with millet (Pennisetum glaucum L.), sorghum [Sorghum bicolor (L.) Moench], and maize (Zea mays L.) was conducted over a 4-yr period in the Sahelian, Sudanian, and Guinean zones of West Africa. Soils ranged in pH from 4.1 to 5.4 along a rainfall gradient from 510 to 1300 mm. Treatments in the factorial experiments were three CR rates (0,500, and 2000 kg ha^-1)and several levels of phosphorus and nitrogen. The results showed CR-induced total dry matter (TDM) increases in cereals up to 73% for the Sahel compared with a maximum of 16% in the wetter Sudanian and Guinean zones. Residue effects on weakly buffered Sahelian soils were due to improved P availability and to a protection of seedlings against wind erosion. Additional effects of CR mulching on topsoil properties in the Sahel were a decrease in peak temperatures by 4°C and increased water availability. These mulch effects on soil chemical and physical properties strongly decreased from North to South. Likely explanations for this decrease are the decline of dust deposition and wind erosion hazards, the higher soil clay content, lower air temperature, and a faster decomposition rate of mulch material with increasing rainfall from the Sahel to the Sudanian and Guinean zones.

Heterochromatin und epigenetische Kontrolle der Centromere in Dictyostelium discoideum

Heterochromatin Protein 1 (HP1) is an evolutionarily conserved protein required for formation of a higher-order chromatin structures and epigenetic gene silencing. The objective of the present work was to functionally characterise HP1-like proteins in Dictyostelium discoideum, and to investigate their function in heterochromatin formation and transcriptional gene silencing. The Dictyostelium genome encodes three HP1-like proteins (hcpA, hcpB, hcpC), from which only two, hcpA and hcpB, but not hcpC were found to be expressed during vegetative growth and under developmental conditions. Therefore, hcpC, albeit no obvious pseudogene, was excluded from this study. Both HcpA and HcpB show the characteristic conserved domain structure of HP1 proteins, consisting of an N-terminal chromo domain and a C-terminal chromo shadow domain, which are separated by a hinge. Both proteins show all biochemical activities characteristic for HP1 proteins, such as homo- and heterodimerisation in vitro and in vivo, and DNA binding activtity. HcpA furthermore seems to bind to K9-methylated histone H3 in vitro. The proteins thus appear to be structurally and functionally conserved in Dictyostelium. The proteins display largely identical subnuclear distribution in several minor foci and concentration in one major cluster at the nuclear periphery. The localisation of this cluster adjacent to the nucleus-associated centrosome and its mitotic behaviour strongly suggest that it represents centromeric heterochromatin. Furthermore, it is characterised by histone H3 lysine-9 dimethylation (H3K9me2), which is another hallmark of Dictyostelium heterochromatin. Therefore, one important aspect of the work was to characterise the so-far largely unknown structural organisation of centromeric heterochromatin. The Dictyostelium homologue of inner centromere protein INCENP (DdINCENP), co-localized with both HcpA and H3K9me2 during metaphase, providing further evidence that H3K9me2 and HcpA/B localisation represent centromeric heterochromatin. Chromatin immunoprecipitation (ChIP) showed that two types of high-copy number retrotransposons (DIRS-1 and skipper), which form large irregular arrays at the chromosome ends, which are thought to contain the Dictyostelium centromeres, are characterised by H3K9me2. Neither overexpression of full-length HcpA or HcpB, nor deletion of single Hcp isoforms resulted in changes in retrotransposon transcript levels. However, overexpression of a C-terminally truncated HcpA protein, assumed to display a dominant negative effect, lead to an increase in skipper retrotransposon transcript levels. Furthermore, overexpression of this protein lead to severe growth defects in axenic suspension culture and reduced cell viability. In order to elucidate the proteins functions in centromeric heterochromatin formation, gene knock-outs for both hcpA and hcpB were generated. Both genes could be successfully targeted and disrupted by homologous recombination. Surprisingly, the degree of functional redundancy of the two isoforms was, although not unexpected, very high. Both single knock-out mutants did not show any obvious phenotypes under standard laboratory conditions and only deletion of hcpA resulted in subtle growth phenotypes when grown at low temperature. All attempts to generate a double null mutant failed. However, both endogenous genes could be disrupted in cells in which a rescue construct that ectopically expressed one of the isoforms either with N-terminal 6xHis- or GFP-tag had been introduced. The data imply that the presence of at least one Hcp isoform is essential in Dictyostelium. The lethality of the hcpA/hcpB double mutant thus greatly hampered functional analysis of the two genes. However, the experiment provided genetic evidence that the GFP-HcpA fusion protein, because of its ability to compensate the loss of the endogenous HcpA protein, was a functional protein. The proteins displayed quantitative differences in dimerisation behaviour, which are conferred by the slightly different hinge and chromo shadow domains at the C-termini. Dimerisation preferences in increasing order were HcpA-HcpA << HcpA-HcpB << HcpB-HcpB. Overexpression of GFP-HcpA or a chimeric protein containing the HcpA C-terminus (GFP-HcpBNAC), but not overexpression of GFP-HcpB or GFP-HcpANBC, lead to increased frequencies of anaphase bridges in late mitotic cells, which are thought to be caused by telomere-telomere fusions. Chromatin targeting of the two proteins is achieved by at least two distinct mechanisms. The N-terminal chromo domain and hinge of the proteins are required for targeting to centromeric heterochromatin, while the C-terminal portion encoding the CSD is required for targeting to several other chromatin regions at the nuclear periphery that are characterised by H3K9me2. Targeting to centromeric heterochromatin likely involves direct binding to DNA. The Dictyostelium genome encodes for all subunits of the origin recognition complex (ORC), which is a possible upstream component of HP1 targeting to chromatin. Overexpression of GFP-tagged OrcB, the Dictyostelium Orc2 homologue, showed a distinct nuclear localisation that partially overlapped with the HcpA distribution. Furthermore, GFP-OrcB localized to the centrosome during the entire cell cycle, indicating an involvement in centrosome function. DnmA is the sole DNA methyltransferase in Dictyostelium required for all DNA(cytosine-)methylation. To test for its in vivo activity, two different cell lines were established that ectopically expressed DnmA-myc or DnmA-GFP. It was assumed that overexpression of these proteins might cause an increase in the 5-methyl-cytosine(5-mC)-levels in the genomic DNA due to genomic hypermethylation. Although DnmA-GFP showed preferential localisation in the nucleus, no changes in the 5-mC-levels in the genomic DNA could be detected by capillary electrophoresis.

CEM - visualization and discovery in Email

This paper presents a lattice-based visual metaphor for knowledge discovery in electronic mail. It allows a user to navigate email using a visual lattice metaphor rather than a tree structure. By using such a conceptual multi-hierarchy, the content and shape of the lattice can be varied to accommodate any number of queries against the email collection. The system provides more flexibility in retrieving stored emails and can be generalised to any electronic documents. The paper presents the underlying mathematical structures, and a number of examples of the lattice and multi-hierarchy working with a prototypical email collection.

Segregation unter Stagnationsbedingungen

Anlass der Untersuchung sind Verstärkungen von strukturwandel- und globalisierungsbedingten Wandlungen unter Schrumpfungs- und Stagnationsbedingungen. Denn Stagnations- und Schrumpfungstendenzen in einer Region sind selektiv, sie begünstigen über verschiedene Mechanismen Polarisierungen und Marginalisierungen: Die allgemeine Entspannung am Wohnungsmarkt hat erhöhte Mobilität und damit sozialräumliche Segregierungen und Polarisierungen der Wohnungsversorgung zur Folge. Leerstände und ausbleibende Investitionen begünstigen Polarisierungen von baulich-räumlichen Qualitäten. Diese beiden Entwicklungen überlagern sich im Stadtraum und verstärken sich gegenseitig. Dabei verbessert sich die Wohnungsversorgung in den benachteiligten Quartieren kaum, so die Ausgangshypothesen. Die Untersuchung fragt nach den Wirkungen des Nebeneinanders von Wachstums-, Stagnations- und Schrumpfungserscheinungen auf unterschiedlichen Maßstabsebenen, dem Zusammenspiel von sozialstrukturellen und qualitativen Veränderungen der baulich-räumlichen Gegebenheiten in den Quartieren sowie in innerstädtischer Differenzierung. Dabei interessieren besonders die Einflüsse eines regional entspannten Wohnungsmarktes und dessen Folgen für die Verwertungsstrategien im Wohnungsbestand auf Segregationsprozesse und die Wohnungsversorgung. Als Fallbeispiel der Untersuchung dient die Stadt Kassel. Der sozialräumliche Fokus liegt auf drei Typen benachteiligter Quartiere: Neben den in der aktuellen Diskussion zumeist betrachteten gründerzeitlichen Arbeiterquartieren und den Großsiedlungen der 1960/70er Jahre wurden auch die peripheren Geschosswohnungsbausiedlungen der 1950er/60er Jahre in die Untersuchung einbezogen, um den unterschiedlichen Rahmenbedingungen und Wirkungen in den Quartierstypen auf die Spur zu kommen und damit letztlich Grundlagen für stadtentwicklungspolitische Strategien zu erarbeiten. Die kleinräumigen Analysen von sozialräumlicher und baulich-räumlicher Struktur sowie zur Wohnungsversorgung deckten Parallelen und gegenläufige Entwicklungen zwischen den unterschiedlichen Quartierstypen auf; es ergaben sich verschiedene Anhaltspunkte zur Erhärtung der Ausgangsthesen. So wurde z.B. deutlich, dass sich unter den Marktbedingungen stagnierender Städte die Wohnflächenversorgung in den benachteiligten Quartieren kaum verbessert. Hierin zeigt sich ein entscheidender Unterschied zu stark schrumpfenden Städten, in denen sich die Versorgungslage (fast) durchgängig verbessert. Wohnungsmarktbarrieren wirken offensichtlich unter Stagnationsbedingungen für bestimmte Bevölkerungsgruppen weiter. Da sich ihre Wirkung aber für weitere Kreise der Bevölkerung abschwächt, verschärfen sich sozialräumliche Konzentrationen. Vor allem aber wurden Überlagerung und gegenseitige Verstärkung dieser sozialräumlichen mit baulich-räumlichen Polarisierungen deutlich, die vor allem aus stadträumlich konzentrierten Investitionen in den Gebäude- und Wohnungsbestand resultieren. Letztlich zeigt sich damit, dass regulierende Eingriffe nicht nur im Rahmen des Umbaus und der Erneuerung der Quartiere erforderlich sind, sondern insbesondere auch in den Wohnungsmarkt und dies auch bei entspannter regionaler Marktlage. Andernfalls ist weder eine angemessene Wohnungsversorgung aller Bevölkerungsgruppen noch der Zusammenhalt der Stadt(Gesellschaft) zu gewährleisten. Dabei ist die Stadtpolitik permanent mit der Gleichzeitigkeit von (wirtschaftlicher) Standortpolitik und sozialer Stadtentwicklung konfrontiert, die sie im Sinne einer nachhaltigen Entwicklung gegeneinander und miteinander abwägen muss.

Meshing highly regular structures: The case of super carbon nanotubes of arbitrary order

Mesh generation is an important step inmany numerical methods.We present the “HierarchicalGraphMeshing” (HGM)method as a novel approach to mesh generation, based on algebraic graph theory.The HGM method can be used to systematically construct configurations exhibiting multiple hierarchies and complex symmetry characteristics. The hierarchical description of structures provided by the HGM method can be exploited to increase the efficiency of multiscale and multigrid methods. In this paper, the HGMmethod is employed for the systematic construction of super carbon nanotubes of arbitrary order, which present a pertinent example of structurally and geometrically complex, yet highly regular, structures. The HGMalgorithm is computationally efficient and exhibits good scaling characteristics. In particular, it scales linearly for super carbon nanotube structures and is working much faster than geometry-based methods employing neighborhood search algorithms. Its modular character makes it conducive to automatization. For the generation of a mesh, the information about the geometry of the structure in a given configuration is added in a way that relates geometric symmetries to structural symmetries. The intrinsically hierarchic description of the resulting mesh greatly reduces the effort of determining mesh hierarchies for multigrid and multiscale applications and helps to exploit symmetry-related methods in the mechanical analysis of complex structures.