Die mikrobielle Besiedlung von Wurzeloberfläche und Rhizosphäre in ihrer Bedeutung für Stoffumsätze in Böden

Im Vordergrund der Arbeit stand die Erfassung der mikrobiellen Biomasse bzw. Residualmasse an der Wurzeloberfläche, im Rhizosphärenboden und im umgebenden Boden. Durch den Vergleich von verschiedenen Methoden zur Erfassung der mikrobiellen Biomasse wurden die Gehalte von pilzlichem und bakteriellem Kohlenstoff an der Rhizoplane und in der Rhizosphäre quantifiziert. Dabei wurde die Fumigations-Extraktions-Methode zur Erfassung der mikrobiellen Biomasse eingesetzt. Ergosterol diente als Indikator für die pilzliche Biomasse und die Aminozucker Glucosamin und Muraminsäure sollten Aufschluss geben über die bakterielle und pilzliche Biomasse bzw. Residualmasse in den drei Probenfraktionen. Dazu wurden Umrechnungsfaktoren erstellt, die zur Berechnung des bakteriellen und pilzlichen Kohlenstoffs aus den Gehalten von Muraminsäure und Pilz-Glucosamin dienten. Die Bestimmung von Aminozuckern wurde insoweit modifiziert, dass sowohl in Boden- als auch in Wurzelhydrolysaten die Messung von Glucosamin, Galactosamin, Muraminsäure und Mannosamin gleichzeitig als automatisiertes Standardverfahren mit Hilfe der HPLC erfolgen konnte. Es wurden drei Gefäßversuche durchgeführt: Im ersten Versuch wurde der Einfluss der Pflanzenart auf die mikrobielle Besiedlung der Wurzeloberflächen untersucht. Dabei wurden Wurzeln und Rhizosphärenboden von 15 verschiedenen Pflanzenarten miteinander verglichen. Im zweiten Versuch stand der Einfluss der mikrobiellen Biomasse eines Bodens auf die mikrobielle Besiedlung von Wurzeloberflächen im Vordergrund. Deutsches Weidelgras (Lolium perenne L.) wurde auf sieben verschiedenen Böden angezogen. Bei den Böden handelte es sich um sechs Oberböden, die sich hinsichtlich des Bodentyps und der Bewirtschaftungsform voneinander unterschieden, und einen Unterboden. Im dritten Versuch wurde die mikrobielle Besiedlung von Wurzeln nach teilweiser und vollständiger Entfernung der oberirdischen Biomasse beobachtet. Welsches Weidelgras (Lolium multiflorum Lam.) wurde 24 Tage nach der Aussaat beschnitten. Anschließend wurde über einen Versuchszeitraum von acht Tagen die mikrobielle Besiedlung an den Wurzeln und in den Bodenfraktionen bestimmt. Es bestätigte sich, dass der Einfluss der einzelnen Pflanzenart von entscheidender Bedeutung für die mikrobielle Besiedlung von Wurzeln ist. Bei fast allen Pflanzen wurde die mikrobielle Biomasse an den Wurzeln von Pilzen dominiert. Das Verhältnis von pilzlichem zu bakteriellem Kohlenstoff an den Wurzeln der 15 Pflanzenarten lag im Mittel bei 2,6. Bei der Betrachtung verschiedener Böden zeigte sich, dass die mikrobielle Besiedlung in tieferen Bodenschichten signifikant niedriger ist als in den Oberböden. Dabei war der Pilzanteil an der mikrobiellen Biomasse im Unterboden deutlich erhöht. Der Vergleich der Oberböden untereinander ergab, dass sowohl der Bodentyp als auch die Bewirtschaftungsform einen signifikanten Einfluss auf mikrobielle Besiedlung ausüben. Durch die teilweise oder vollständige Entfernung der oberirdischen Biomasse wurde eine Veränderung der mikrobiellen Besiedlung an den Wurzeln beobachtet. Das Verhältnis von pilzlichem zu bakteriellem Kohlenstoff sank in dem Versuchszeitraum von 2,5 auf 1,4. Dabei war die Förderung der Pilze in der Variante mit teilweise entfernter oberirdischer Biomasse relativ größer als in der Variante mit vollständig entfernter oberirdischer Biomasse. Entgegen der weit verbreiteten Annahme, dass bei den wurzelbesiedelnden Mikroorganismen die Bakterien gegenüber den Pilzen dominieren, zeigten die Ergebnisse ein gegensätzliches Bild. In allen drei Versuchen ergab sich gleichermaßen, dass sowohl im Boden als auch an den Wurzeln die Pilze gegenüber den Bakterien dominieren.

Application of biogas slurries from energy crops to arable soils and their impact on carbon and nitrogen dynamics

The use of renewable primary products as co-substrate or single substrate for biogas production has increased consistently over the last few years. Maize silage is the preferential energy crop used for fermentation due to its high methane (CH4) yield per hectare. Equally, the by-product, namely biogas slurry (BS), is used with increasing frequency as organic fertilizer to return nutrients to the soil and to maintain or increase the organic matter stocks and soil fertility. Studies concerning the application of energy crop-derived BS on the carbon (C) and nitrogen (N) mineralization dynamics are scarce. Thus, this thesis focused on the following objectives: I) The determination of the effects caused by rainfall patterns on the C and N dynamics from two contrasting organic fertilizers, namely BS from maize silage and composted cattle manure (CM), by monitoring emissions of nitrous oxide (N2O), carbon dioxide (CO2) and CH4 as well as leaching losses of C and N. II) The investigation of the impact of differences in soil moisture content after the application of BS and temperature on gaseous emissions (CO2, N2O and CH4) and leaching of C and N compounds. III) A comparison of BS properties obtained from biogas plants with different substrate inputs and operating parameters and their effect on C and N dynamics after application to differently textured soils with varying application rates and water contents. For the objectives I) and II) two experiments (experiment I and II) using undisturbed soil cores of a Haplic Luvisol were carried out. Objective III) was studied on a third experiment (experiment III) with disturbed soil samples. During experiment I three rainfall patterns were implemented including constant irrigation, continuous irrigation with periodic heavy rainfall events, and partial drying with rewetting periods. Biogas slurry and CM were applied at a rate of 100 kg N ha-1. During experiment II constant irrigation and an irrigation pattern with partial drying with rewetting periods were carried out at 13.5°C and 23.5°C. The application of BS took place either directly before a rewetting period or one week after the rewetting period stopped. Experiment III included two soils of different texture which were mixed with ten BS’s originating from ten different biogas plants. Treatments included low, medium and high BS-N application rates and water contents ranging from 50% to 100% of water holding capacity (WHC). Experiment I and II showed that after the application of BS cumulative N2O emissions were 4 times (162 mg N2O-N m-2) higher compared to the application of CM caused by a higher content of mineral N (Nmin) in the form of ammonium (NH4+) in the BS. The cumulative emissions of CO2, however, were on the same level for both fertilizers indicating similar amounts of readily available C after composting and fermentation of organic material. Leaching losses occurred predominantly in the mineral form of nitrate (NO3-) and were higher in BS amended soils (9 mg NO3--N m-2) compared to CM amended soils (5 mg NO3--N m-2). The rainfall pattern in experiment I and II merely affected the temporal production of C and N emissions resulting in reduced CO2 and enhanced N2O emissions during stronger irrigation events, but showed no effect on the cumulative emissions. Overall, a significant increase of CH4 consumption under inconstant irrigation was found. The time of fertilization had no effect on the overall C and N dynamics. Increasing temperature from 13.5°C to 23.5°C enhanced the CO2 and N2O emissions by a factor of 1.7 and 3.7, respectively. Due to the increased microbial activity with increasing temperature soil respiration was enhanced. This led to decreasing oxygen (O2) contents which in turn promoted denitrification in soil due to the extension of anaerobic microsites. Leaching losses of NO3- were also significantly affected by increasing temperature whereas the consumption of CH4 was not affected. The third experiment showed that the input materials of biogas plants affected the properties of the resulting BS. In particular the contents of DM and NH4+ were determined by the amount of added plant biomass and excrement-based biomass, respectively. Correlations between BS properties and CO2 or N2O emissions were not detected. Solely the ammonia (NH3) emissions showed a positive correlation with NH4+ content in BS as well as a negative correlation with the total C (Ct) content. The BS-N application rates affected the relative CO2 emissions (% of C supplied with BS) when applied to silty soil as well as the relative N2O emissions (% of N supplied with BS) when applied to sandy soil. The impacts on the C and N dynamics induced by BS application were exceeded by the differences induced by soil texture. Presumably, due to the higher clay content in silty soils, organic matter was stabilized by organo-mineral interactions and NH4+ was adsorbed at the cation exchange sites. Different water contents induced highest CO2 emissions and therefore optimal conditions for microbial activity at 75% of WHC in both soils. Cumulative nitrification was also highest at 75% and 50% of WHC whereas the relative N2O emissions increased with water content and showed higher N2O losses in sandy soils. In summary it can be stated that the findings of the present thesis confirmed the high fertilizer value of BS’s, caused by high concentrations of NH4+ and labile organic compounds such as readily available carbon. These attributes of BS’s are to a great extent independent of the input materials of biogas plants. However, considerably gaseous and leaching losses of N may occur especially at high moisture contents. The emissions of N2O after field application corresponded with those of animal slurries.

Effects of plant diversity on bioenergy parameters in grassland biomass

Extensive grassland biomass for bioenergy production has long been subject of scientific research. The possibility of combining nature conservation goals with a profitable management while reducing competition with food production has created a strong interest in this topic. However, the botanical composition will play a key role for solid fuel quality of grassland biomass and will have effects on the combustion process by potentially causing corrosion, emission and slagging. On the other hand, botanical composition will affect anaerobic digestibility and thereby the biogas potential. In this thesis aboveground biomass from the Jena-Experiment plots was harvested in 2008 and 2009 and analysed for the most relevant chemical constituents effecting fuel quality and anaerobic digestibility. Regarding combustion, the following parameters were of main focus: higher heating value (HHV), gross energy yield (GE), ash content, ash softening temperature (AST), K, Ca, Mg, N, Cl and S content. For biogas production the following parameters were investigated: substrate specific methane yield (CH4 sub), area specific methane yield (CH4 area), crude fibre (CF), crude protein (CP), crude lipid (CL) and nitrogen-free extract (NfE). Furthermore, an improvement of the fuel quality was investigated through applying the Integrated generation of solid Fuel and Biogas from Biomass (IFBB) procedure. Through the specific setup of the Jena-Experiment it was possible to outline the changes of these parameters along two diversity gradients: (i) species richness (SR; 1 to 60 species) and (ii) functional group (grasses, legumes, small herbs and tall herbs) presence. This was a novel approach on investigating the bioenergy characteristic of extensive grassland biomass and gave detailed insight in the sward-composition¬ - bioenergy relations such as: (i) the most relevant SR effect was the increase of energy yield for both combustion (annual GE increased by 26% from SR8→16 and by 65% from SR8→60) and anaerobic digestion (annual CH4 area increased by 22% from SR8→16 and by 49% from SR8→60) through a strong interaction of SR with biomass yield; (ii) legumes play a key role for the utilization of grassland biomass for energy production as they increase the energy content of the substrate (HHV and CH4 sub) and the energy yield (GE and CH4 area); (iii) combustion is the conversion technique that will yield the highest energy output but requires an improvement of the solid fuel quality in order to reduce the risk of corrosion, emission and slagging related problems. This was achieved through applying the IFBB-procedure, with reductions in ash (by 23%), N (28%), K (85%), Cl (56%) and S (59%) and equal levels of concentrations along the SR gradient.