Development of directly modulated high speed telecommunication lasers based on surface defined feedback gratings

High-speed semiconductor lasers are an integral part in the implemen- tation of high-bit-rate optical communications systems. They are com- pact, rugged, reliable, long-lived, and relatively inexpensive sources of coherent light. Due to the very low attenuation window that exists in the silica based optical fiber at 1.55 μm and the zero dispersion point at 1.3 μm, they have become the mainstay of optical fiber com- munication systems. For the fabrication of lasers with gratings such as, distributed bragg reflector or distributed feedback lasers, etching is the most critical step. Etching defines the lateral dimmensions of the structure which determines the performance of optoelectronic devices. In this thesis studies and experiments were carried out about the exist- ing etching processes for InP and a novel dry etching process was de- veloped. The newly developed process was based on Cl2/CH4/H2/Ar chemistry and resulted in very smooth surfaces and vertical side walls. With this process the grating definition was significantly improved as compared to other technological developments in the respective field. A surface defined grating definition approach is used in this thesis work which does not require any re-growth steps and makes the whole fabrication process simpler and cost effective. Moreover, this grating fabrication process is fully compatible with nano-imprint lithography and can be used for high throughput low-cost manufacturing. With usual etching techniques reported before it is not possible to etch very deep because of aspect ratio dependent etching phenomenon where with increasing etch depth the etch rate slows down resulting in non-vertical side walls and footing effects. Although with our de- veloped process quite vertical side walls were achieved but footing was still a problem. To overcome the challenges related to grating defini- tion and deep etching, a completely new three step gas chopping dry etching process was developed. This was the very first time that a time multiplexed etching process for an InP based material system was demonstrated. The developed gas chopping process showed extra ordinary results including high mask selectivity of 15, moderate etch- ing rate, very vertical side walls and a record high aspect ratio of 41. Both the developed etching processes are completely compatible with nano imprint lithography and can be used for low-cost high-throughput fabrication. A large number of broad area laser, ridge waveguide laser, distributed feedback laser, distributed bragg reflector laser and coupled cavity in- jection grating lasers were fabricated using the developed one step etch- ing process. Very extensive characterization was done to optimize all the important design and fabrication parameters. The devices devel- oped have shown excellent performance with a very high side mode suppression ratio of more than 52 dB, an output power of 17 mW per facet, high efficiency of 0.15 W/A, stable operation over temperature and injected currents and a threshold current as low as 30 mA for almost 1 mm long device. A record high modulation bandwidth of 15 GHz with electron-photon resonance and open eye diagrams for 10 Gbps data transmission were also shown.

Large-Size AlGaN/GaN HEMT Large-Signal Electrothermal Characterization and Modeling for Wireless Digital Communications

The rapid growth in high data rate communication systems has introduced new high spectral efficient modulation techniques and standards such as LTE-A (long term evolution-advanced) for 4G (4th generation) systems. These techniques have provided a broader bandwidth but introduced high peak-to-average power ratio (PAR) problem at the high power amplifier (HPA) level of the communication system base transceiver station (BTS). To avoid spectral spreading due to high PAR, stringent requirement on linearity is needed which brings the HPA to operate at large back-off power at the expense of power efficiency. Consequently, high power devices are fundamental in HPAs for high linearity and efficiency. Recent development in wide bandgap power devices, in particular AlGaN/GaN HEMT, has offered higher power level with superior linearity-efficiency trade-off in microwaves communication. For cost-effective HPA design to production cycle, rigorous computer aided design (CAD) AlGaN/GaN HEMT models are essential to reflect real response with increasing power level and channel temperature. Therefore, large-size AlGaN/GaN HEMT large-signal electrothermal modeling procedure is proposed. The HEMT structure analysis, characterization, data processing, model extraction and model implementation phases have been covered in this thesis including trapping and self-heating dispersion accounting for nonlinear drain current collapse. The small-signal model is extracted using the 22-element modeling procedure developed in our department. The intrinsic large-signal model is deeply investigated in conjunction with linearity prediction. The accuracy of the nonlinear drain current has been enhanced through several issues such as trapping and self-heating characterization. Also, the HEMT structure thermal profile has been investigated and corresponding thermal resistance has been extracted through thermal simulation and chuck-controlled temperature pulsed I(V) and static DC measurements. Higher-order equivalent thermal model is extracted and implemented in the HEMT large-signal model to accurately estimate instantaneous channel temperature. Moreover, trapping and self-heating transients has been characterized through transient measurements. The obtained time constants are represented by equivalent sub-circuits and integrated in the nonlinear drain current implementation to account for complex communication signals dynamic prediction. The obtained verification of this table-based large-size large-signal electrothermal model implementation has illustrated high accuracy in terms of output power, gain, efficiency and nonlinearity prediction with respect to standard large-signal test signals.

Ist der Ernährungsführerschein eine geeignete Primärpräventionsmaßnahme, um die Ernährungssituation zu verbessern?

Das Ernährungsverhalten einer Bevölkerung hat einen wesentlichen Einfluss auf das Wohlbefinden, die Gesundheit und Leistungsfähigkeit der Menschen. Ernährungsbedingte, chronische Erkrankungen weisen in den westlichen Industrienationen eine hohe Inzidenz und Prävalenz auf. Präventionsmaßnahmen im Setting Schule sollen das Ernährungsverhalten der Kinder- und Jugendlichen positiv beeinflussen. Gerade in diesem Setting können Personen mit unterschiedlichem sozioökonomischem Status, sowie Personen aus diversen Lebensbereichen angesprochen werden. Der Ernährungsführerschein (EFS) ist eine schulbasierte Primärpräventions-maßnahme, der in der 3. Jahrgangsstufe/Grundschule durchgeführt wird. In 6 – 7 Unterrichtseinheiten erfolgt eine praxisnahe Vermittlung von Grundkenntnissen über Ernährung, Lebensmittel und deren Zubereitung. Der EFS möchte eine Verhaltensänderung der Schulkinder bewirken. Sie erlernen Kompetenzen, damit sie in der Lage sind, sich selbst eine gesunde Mahlzeit zubereiten zu können. Aber kann dieses Projekt eine nachhaltige Verhaltensänderung bewirken? Die folgende Studie mit Mixed-Methods-Ansatz im Explanatory-Sequential-Design versucht genau dieser Frage nachzugehen. Auf eine quantitative Prä- und Postbefragung in 16 Klassen an 12 Grundschulen im Landkreis Marburg Biedenkopf und insgesamt 992 Befragungen folgte eine qualitative Studie mit neun problemzentrierten, leitfadengestützten Interviews. Der EFS zeigt keinen signifikanten Einfluss auf die Veränderung des Ernährungsverhaltens. Positiv zu bewerten ist, dass durch den EFS Alltagskompetenzen bei der Nahrungszubereitung gefördert wurden. Dieser positive Einfluss muss jedoch differenziert betrachtet werden, denn die qualitativen Studie zeigt, dass der EFS sehr gut in Familien aufgenommen wird, die sich bereits mit Ernährungsfragen auseinandersetzen und darauf achten, einen ernährungsphysiologisch günstigen Ernährungsstil zu leben oder anzustreben. In Familien der Billig- und Fleischesser konnte der EFS die Türen nicht öffnen. Aber gerade in diesem Segment wäre eine Veränderung des Essverhaltens induziert. Die Untersuchung ergab, dass der EFS für sich alleine nicht den Anspruch erheben kann, die Ernährungssituation der Kinder und Familien zu verbessern. Aber er bietet ein methodisch-didaktisch gut ausgearbeitetes Konzept und könnte als Baustein in die Entwicklung eines praxisnahen, erlebnisorientierten und ganzheitlichen Ernährungsbildungskonzepts unter Berücksichtigung diverser Settings und Lebenswelten der Kinder und Familien einfließen.