Recycling urban waste as possible use for rooftop vegetable garden

Urban authorities in Europe are confronted with increasing demands by urban dwellers for allotment gardens, but vacant urban soil tends to be scarce and/or polluted by past industrial activities. A possible solution for local authorities could therefore be to promote rooftop gardening. However little technical information exists on certain forms of rooftop urban agriculture, called Z-Farming. In 2012, a pilot experiment was run in Paris (France). Simple and cheap systems of rooftop gardening were tested on a rooftop using as crop substrates only local urban organic waste so as to contribute to the urban metabolism. Production levels and heavy metal contents in cropping substrates and edible vegetables were measured. Available results show (i) high levels of crop production with limited inputs compared to land professional gardening, (ii) low levels of heavy metal pollutants in the edible parts of the crops, especially for Cd and Pb with respect to EU norms for vegetables and (iii) positive influence on yields on organizing the substrate in layers and enhancing the biological activity through earthworm inoculation. These encouraging results allow us to consider that rooftop gardening is feasible and seem to have a great potential to improve urban resiliency. It will nevertheless be necessary to identify more precisely the types of roof that can be used and to assess more fully the generic result of the low level of pollution, as well as the global sustainability of these cropping systems.

Modelling and simulation of a photovoltaic fuel cell hybrid system

A stand-alone power system is an autonomous system that supplies electricity to the user load without being connected to the electric grid. This kind of decentralized system is frequently located in remote and inaccessible areas. It is essential for about one third of the world population which are living in developed or isolated regions and have no access to an electricity utility grid. The most people live in remote and rural areas, with low population density, lacking even the basic infrastructure. The utility grid extension to these locations is not a cost effective option and sometimes technically not feasible. The purpose of this thesis is the modelling and simulation of a stand-alone hybrid power system, referred to as “hydrogen Photovoltaic-Fuel Cell (PVFC) hybrid system”. It couples a photovoltaic generator (PV), an alkaline water electrolyser, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to give different system topologies. The system is intended to be an environmentally friendly solution since it tries maximising the use of a renewable energy source. Electricity is produced by a PV generator to meet the requirements of a user load. Whenever there is enough solar radiation, the user load can be powered totally by the PV electricity. During periods of low solar radiation, auxiliary electricity is required. An alkaline high pressure water electrolyser is powered by the excess energy from the PV generator to produce hydrogen and oxygen at a pressure of maximum 30bar. Gases are stored without compression for short- (hourly or daily) and long- (seasonal) term. A proton exchange membrane (PEM) fuel cell is used to keep the system’s reliability at the same level as for the conventional system while decreasing the environmental impact of the whole system. The PEM fuel cell consumes gases which are produced by an electrolyser to meet the user load demand when the PV generator energy is deficient, so that it works as an auxiliary generator. Power conditioning units are appropriate for the conversion and dispatch the energy between the components of the system. No batteries are used in this system since they represent the weakest when used in PV systems due to their need for sophisticated control and their short lifetime. The model library, ISET Alternative Power Library (ISET-APL), is designed by the Institute of Solar Energy supply Technology (ISET) and used for the simulation of the hybrid system. The physical, analytical and/or empirical equations of each component are programmed and implemented separately in this library for the simulation software program Simplorer by C++ language. The model parameters are derived from manufacturer’s performance data sheets or measurements obtained from literature. The identification and validation of the major hydrogen PVFC hybrid system component models are evaluated according to the measured data of the components, from the manufacturer’s data sheet or from actual system operation. Then, the overall system is simulated, at intervals of one hour each, by using solar radiation as the primary energy input and hydrogen as energy storage for one year operation. A comparison between different topologies, such as DC or AC coupled systems, is carried out on the basis of energy point of view at two locations with different geographical latitudes, in Kassel/Germany (Europe) and in Cairo/Egypt (North Africa). The main conclusion in this work is that the simulation method of the system study under different conditions could successfully be used to give good visualization and comparison between those topologies for the overall performance of the system. The operational performance of the system is not only depending on component efficiency but also on system design and consumption behaviour. The worst case of this system is the low efficiency of the storage subsystem made of the electrolyser, the gas storage tank, and the fuel cell as it is around 25-34% at Cairo and 29-37% at Kassel. Therefore, the research for this system should be concentrated in the subsystem components development especially the fuel cell.

Charakterisierung von Möhren und Weizen aus ökologischem und konventionellem Anbau anhand ihrer Carotinoid- und Polyphenolkonzentration

Kurzfassung: Der Markt für ökologische Lebensmittel wächst stark. Verbraucher kaufen Produkte aus ökologischem Landbau aus einer Vielzahl von Gründen. Ein Teil dieser Gründe lässt sich nicht auf die Produktqualität zurückführen, sondern beruht auf der Annahme, dass sich der Produktionsprozess des Ökologischen Landbaus hinsichtlich der Schonung von Umweltressourcen, der Nachhaltigkeit der Produktion und sozialen Komponenten vom konventionellen Anbau unterscheidet. Daneben spielt der Wunsch nach einer gesunden Ernährung eine Rolle. Ökologische Lebensmittel können als Vertrauensgüter verstanden werden. Lebensmittelskandale machten in den vergangenen Jahren auch vor ökologischen Lebens¬mitteln nicht Halt. Folgerichtig erschütterte dies das Vertrauen der Verbraucher in ökologische Produkte. Mit steigender Produktion könnte die Gefahr, das weitere solche Ereignisse auftreten, steigen. Daher besteht Bedarf für Methoden, die die ökologische Produktqualität im Sinne einer Authentizitätsprüfung prüfen. Eine solche Prüfung könnte sich auf die Analyse sekundärer Pflanzenstoffe stützen. Diese Gruppe von Pflanzeninhaltsstoffen spielt bei der Diskussion um die besondere Qualität ökologischer Pflanzenprodukte eine große Rolle. Postuliert wird, dass ökologisch angebaute Pflanzen mangels mineralischer Düngung und mangels Schädlingsbekämpfung mit synthetischen Pestiziden einem erhöhten Stress ausgesetzt sind. Dies soll sich in einem höheren Niveau der mit den Selbstverteidigungsmechanismen der Pflanze eng verbundenen sekundären Pflanzenstoffe ausdrücken. Wichtige Untergruppen der sekundären Pflanzenstoffe sind Carotinoide und Polyphenole. An Weizen (Triticum aestivum L. und Triticum durum L.) und Möhre (Daucus carota L.) als für den ökologischen Landbau wichtigen Produkten wurden Messungen der Carotinoid- und Polyphenolkonzentration mit dem Ziel durchgeführt, die potentielle Eignung dieser Pflanzenstoffe als Biomarker zur Authentizitätsprüfung ökologischer Produkte zu evaluieren. Dazu wurden Proben aus ökologischem und konventionellem Anbau (Paarvergleich) untersucht. Diese stammten aus Langzeit-Feldversuchen (Weizen aus dem DOK- und dem MASCOT-Versuch), Feldversuchen und von Betriebspaaren untersucht. Ein generell höheres Niveau sekundärer Pflanzenstoffe in Möhren bzw. Weizen aus ökologischem Anbau gegenüber Proben aus konventionellem Anbau wurde nicht gefunden. Die Carotinoide waren weder bei der Möhre noch beim Weizen zur Authentizitätsprüfung geeignet. Die Konzentration der Carotinoide wurde stark durch die nicht dem Anbau¬verfahren zuzuordnenden Faktoren Klima, Sorte und Standort beeinflusst. Die Luteinkonzentration war das einzige durch das Anbauverfahren systematisch beeinflusste Carotenoid bei Weizen und Möhre. Die Unterschiede der Luteinkonzentration waren aber im Paarvergleich von Proben (ökologischer versus konventioneller Anbau) nicht durchgängig signifikant. Die Eignung von Polyphenolen als potentielles Authentizitätskriterium wurde nur an Möhren geprüft. Im Paarvergleich unterschieden sich die Konzentrationen einzelner Polyphenole signifikant und konsistent über Probenjahre und Standorte, nicht jedoch über Sorten hinweg. Wie bei den Carotinoiden konnte auch hier ein starker Einfluss von Probenjahr, Standort und Sorte gezeigt werden. Trotz der Variation durch diese nicht dem Anbau zuzuordnenden Faktoren war eine korrekte Klassifizierung der Proben nach Anbauverfahren möglich. Dies wurde mittels Diskriminanzanalyse getestet. Die Polyphenole sind daher potentiell als Authentizitätskriterium geeignet.

Biohöfe als Ausgangspunkte informeller Lernprozesse

Die Arbeit befasst sich mit der Frage nach dem Einfluss von Biohöfen auf die Menschen, die in ihrem Umfeld leben. Sie bietet Einblicke in die Zusammenhänge, in denen Nachbarn, Kollegen, Freunde oder Kunden einen Biohof gezielt oder eher zufällig nutzen, um hier informell Erfahrungen zu sammeln, die zu nachhaltigen Lebennstilen und Wirtschaftsweisen beitragen können. Im Rahmen von sechs Fallstudien wurden hierfür ökologisch wirtschaftende Landwirtschaftsbetriebe in Brandenburg im Hinblick auf die informelle Vermittlung von Wissen und Erfahrungen qualitativ untersucht. Mit Hilfe der Grounded Theory wird die Entstehung von informellen Lernprozessen im sozialen Umfeld der Höfe rekonstruiert. Neben dem empirischen Ausgangsmaterial erwiesen sich die handlungstheoretischen Konstrukte Lebenswelt, Habitus, Lebensstil und Lebensführung als hilfreicher Interpretationshintergrund. Mit diesen theoretischen Ansätzen werden die soziokulturellen Einflussfaktoren für Erfahren, Lernen und Vermitteln betont. Informelles Lernen wird so als ein sozial eingebetteter Prozess verstanden. Aus dieser, weniger subjektorientierten Perspektive treten dann Faktoren wie z.B. die Atmosphäre der Beziehung zwischen einer Person und dem Biohof, die sinnliche Wahrnehmung und die Art der Kommunikation in das Blickfeld der Analyse. In der Untersuchung wird eine Vielzahl von Verhaltensänderungen, Denkanstößen und Anregungen benannt, die im Zusammenhang mit den untersuchten Biohöfen geschildert wurden und die im Hinblick auf eine nachhaltige Entwicklung als förderlich eingeschätzt werden. Sie basieren, so der Ansatz der Arbeit, auf informellen Lernprozessen. Das zentrale Ergebnis der Fallanalysen ist eine strukturierte Zusammenstellung der im Untersuchungskontext relevanten Einflussfaktoren für erfolgreiches informelles Lernen. Als wesentliche erscheinen hierbei insbesondere zwei Variablen: zum einen hat sich das „wohlwollende Interesse“ als förderlich für das Zustandekommen und den Verlauf von informellen Lernprozessen herausgestellt. Mit diesem Begriff wird eine Einstellung dem Biohof gegenüber beschrieben, die ein Wohlgesonnensein, das Vertrauen und die Neugierde am Hof beinhaltet. Zum anderen scheint die „Erlebbarkeit“ der Angebote zur Wissensvermittlung für das informelle, habitus- und lebensstilbezogene Lernen bedeutsam zu sein. Ergänzend zu dem auf die lernenden Subjekte gerichteten Fokus wurden in der Forschungsarbeit auch Beweggründe der Betriebsleiter, für die jeweils praktizierte Wissens- und Erfahrungsvermittlung herausgearbeitet. Die Betrachtung wird durch die Zusammenstellung von Schwierigkeiten und Hindernissen abgerundet, die dem informellen Lernen vom Biohof entgegen stehen können. Ausgehend von den fallbezogenen Ergebnissen liefert die Arbeit damit eine Grundlage, um über die Bedeutung von Lernfeldern, die durch Biolandwirte, aber auch andere Akteursgruppen bereit gestellt werden, nachzudenken und um ihre gesellschaftliche Relevanz zu diskutieren.

The Corticiaceae (Basidiomycetes) in Taiwan

Geographically, Taiwan is an Island and situated in the northeast of Asia, on the western side of the Pacific Basin, at the southeast of main China, south of Japan, and north of the Philippines. The main topographic character is the longitudinally oriented mountainous area. More than 200 peaks rise above 3000 m. They departed Taiwan into two lowland areas, an eastern and western plain. Taiwan is departed into subtropical (north area) and tropical zone (south area), which have a warm and humid climate, due to the Tropic of Cancer passing through. The average annual temperature in the lowland amounts to 28°C (7~38°C). The temperate climate also presents in the mountainous areas. The tropical typhoons usually come in summer and bring heavy rain, while the monsoon seasons have an important effect on the regional rainfall distribution. The mean annual rainfall of Taiwan is about 2600 mm (1000~6700 mm); the mountainous areas receive more rain than the lowlands. In Taiwan, according to different temperature and vegetation, the ecological environments were given rise to vertical biotic zonations, and form five major types: highland snowfield, highland meadow, coniferous forest, deciduous forest, and tropical forest. Six National Parks in Taiwan are located in the mountainous areas, in the north, the south, and on Jinmen Island. The National Parks represent about 8.4% of the country area. In this study, the collection sites are situated in Yangmingshan, Shei-Pa, Yushan, and Kenting National Park. Due to the island isolation, the proportions of endemic species are great in Taiwan, which also presents a high biodiversity. There are 4255 species of vascular plants including 1133 endemic. 5936 species in 1276 genera of fungi are hitherto reported in Taiwan. Among them, 233 Corticiaceae species were recorded, over one third (79 species) of them are known only from Taiwan. The first fungal report in Taiwan is about Phytophthora cyperi, published by the Japanese researcher T. Kawakami in 1904. Therefore, the history of research about fungi in Taiwan is more than one hundred years old. An eminent Japanese mycologist K. Sawada made an intensive survey from 1919 to 1959, and reported 2464 fungi species in his eleven volumes of “Descriptive Catalogue of Formosan Fungi”. However, only a few species (21 species in 9 genera) of Corticiaceae were recorded. From 1973, Chen and Lin resumed the study on Corticiaceae, and also some other foreign mycologists contributed for this field after 1980. The German research group lead by Franz Oberwinkler from Tübingen University collected in Taiwan several times. They published a number of new species and new records. Since 1989, S. H. Wu, a Taiwanese mycologist, has published a great amount of reports on corticioid fungi from Taiwan. Corticioid fungi were made up by the large and heterogeneous unnatural family Corticiaceae and other resupinate fungi belonging to other natural families in the Agaricomycetes. Molecular studies have shown that corticioid genera are distributed across all major clades of Agaricomycetes indicating that the corticioid fungi represent a polyphyletic group. They have resupinate fruitbodies and similar habitats. Species are characterized by simple fruitbody, more or less effused, and present smooth, porioid, grandinioid to odontioid hymenial surface. The fruitbodies are differently colored and usually soft to tough. Most of the Corticiaceae species are wood-saprobic organisms and gain the energy from the decomposing of wood-substrate such as cellulose or lignin. Materials for this study were collected by the author and other mycologists in Taiwan during surveys in April and May 1996, and March 2007, using the spring season with its high humidity and warm climate which are optimal conditions for the development of fungi. For assembling, the convenience sampling method was used in this study. This approach was chosen because it enables to detect a high biodiversity in a short time, and also to find species with rare or patchy distribution. The collecting sites from the North to the South include four National Parks and some preserved forests. They cover many different habitats such as low lands and high mountains. Fresh specimens were dried and analysed with a light microscope. 265 specimens belonging to Corticiaceae were studied in this research. Among them, 50 species in 21 genera including 11 new records and 10 new species were described with text and drawing. Four new species are belonging to Hyphodontia (H. sp. nov. 1, H. sp. nov. 2, H. sp. nov. 3, and H. sp. nov. 4), four to Schizopora (Sch. sp. nov. 1, Sch. sp. nov. 2, Sch. sp. nov. 3, and Sch. sp. nov. 4), one in Trechispora (T. sp. nov. 1), and one in Tubulicrinis (T. sp. nov. 1). Species recorded as new are Aleurodiscus amorphus, Botryohypochnus isabellinus, Hyphodontia cineracea, Hyphodontia palmae, Hypochnicium vellereum, Merulius tremellosus, Metulodontia nivea, Paullicorticium ansatum, Phlebia radiata, Phlebiella ardosiaca, and Xylobolus frustulatus. Besides, Botryohypochnus, Merulius, Metulodontia, Paullicorticium, and Xylobolus are also newly recorded genera in Taiwan. The genus Hyphodontia presents the highest diversity with 20 out of 50 species recorded. The second important genus is Hyphoderma, however with only 5 species. This indicates that Hyphodontia and Hyphoderma have a higher ability to develop in variable environments and approximately shows the predominance of these two genera in Taiwanese Corticiaceae. There are 11 new records out of the 50 species recorded, representing 22%. Some species, e.g. Hypochnicium vellereum and Paullicorticium ansatum were in the past recorded only in Europe and North America with cold and temperate climate. The samples of them are for the first time found in the subtropical belt, and display some difference from those of temperate regions. These collections should be molecularly investigated to clarify if they represent the same species of temperate areas. Patchily distributed species, for example Phlebiella ardosiaca, previously known only in Europe, and Hyphodontia palmae collected only in Brazil, were first recorded in different continents. Two possibilities are indicated by these new records: they are worldwide species but very rare to be found, or the Taiwanese specimens are taxonomically different. More survey from other continents and molecular study for these collections should be done in the future to solve this question. The distribution of Corticiaceae in Taiwan presents the variations in the north, central, and south areas and shows the diversity in lowlands and high mountains. The results of this study provide the evidence that the temperate Corticiaceae species displays a wider distribution. Subtropical and tropical taxa probably have also high dispersal capacities, and could possibly be found in the future in neighboring areas such as China, Japan, Korea or South Asia, but this needs further researches. In the total of 50 species, 10 new taxa were described in this study, giving about 20%. Some new species (e.g. Hyphodontia sp. 1, Hyphodontia sp. 2, and Hyphodontia sp. 3) are very similar to known species (Hyphodontia sambuci and Hyphodontia formosana), and the distinctive characters of Schizopora sp. nov. 1 are intermediate between those of Schizopora paradoxa and Hyphodontia flavipora. Thus, these small differences between the new and known species, suggest that the speciation occurred when the fungi migrated into Taiwan, due to the high diversity of environment, and amounts of the endemic plants. Taiwan is an intermediate place for the south (tropical) fungal species to migrate and adapt to north (temperate) regions. The middle and high altitude environments in Taiwan offer good conditions for the fungal speciation and possibly the occurrence of physiological changes to adapt to the temperate climate. Thus Taiwan has an important position for the biogeography of Asia mycobiota. 5936 known species in Taiwan represent about only 20% of the estimated number (24000) of Taiwanese fungal taxa. In this study, the findings (22% new records and 20% new species) indicate that amounts of unknown fungi species are expected in Taiwan. The lack of knowledge indicates that many new species are awaiting description, and fungal survey in Taiwan remains in a Pioneer phase. The last three wide surveys of Corticiaceae researches took place 20 years before this study (Chen & Lin 1977, Lin & Chen 1989, Wu 1990). After previous important contributions, the present taxonomic study comprising 21 genera is the most extensive on Corticiaceae of Taiwan.

Impact of sward type, cutting date and conditioning temperature on mass and energy flows in the integrated generation of solid fuel and biogas from semi-natural grassland

Energy production from biomass and the conservation of ecologically valuable grassland habitats are two important issues of agriculture today. The combination of a bioenergy production, which minimises environmental impacts and competition with food production for land with a conversion of semi-natural grasslands through new utilization alternatives for the biomass, led to the development of the IFBB process. Its basic principle is the separation of biomass into a liquid fraction (press fluid, PF) for the production of electric and thermal energy after anaerobic digestion to biogas and a solid fraction (press cake, PC) for the production of thermal energy through combustion. This study was undertaken to explore mass and energy flows as well as quality aspects of energy carriers within the IFBB process and determine their dependency on biomass-related and technical parameters. Two experiments were conducted, in which biomass from semi-natural grassland was conserved as silage and subjected to a hydrothermal conditioning and a subsequent mechanical dehydration with a screw press. Methane yield of the PF and the untreated silage was determined in anaerobic digestion experiments in batch fermenters at 37°C with a fermentation time of 13-15 and 27-35 days for the PF and the silage, respectively. Concentrations of dry matter (DM), ash, crude protein (CP), crude fibre (CF), ether extract (EE), neutral detergent fibre (NDF), acid detergent fibre (ADF), acid detergent ligning (ADL) and elements (K, Mg, Ca, Cl, N, S, P, C, H, N) were determined in the untreated biomass and the PC. Higher heating value (HHV) and ash softening temperature (AST) were calculated based on elemental concentration. Chemical composition of the PF and mass flows of all plant compounds into the PF were calculated. In the first experiment, biomass from five different semi-natural grassland swards (Arrhenaterion I and II, Caricion fuscae, Filipendulion ulmariae, Polygono-Trisetion) was harvested at one late sampling (19 July or 31 August) and ensiled. Each silage was subjected to three different temperature treatments (5°C, 60°C, 80°C) during hydrothermal conditioning. Based on observed methane yields and HHV as energy output parameters as well as literature-based and observed energy input parameters, energy and green house gas (GHG) balances were calculated for IFBB and two reference conversion processes, whole-crop digestion of untreated silage (WCD) and combustion of hay (CH). In the second experiment, biomass from one single semi-natural grassland sward (Arrhenaterion) was harvested at eight consecutive dates (27/04, 02/05, 09/05, 16/05, 24/05, 31/05, 11/06, 21/06) and ensiled. Each silage was subjected to six different treatments (no hydrothermal conditioning and hydrothermal conditioning at 10°C, 30°C, 50°C, 70°C, 90°C). Energy balance was calculated for IFBB and WCD. Multiple regression models were developed to predict mass flows, concentrations of elements in the PC, concentration of organic compounds in the PF and energy conversion efficiency of the IFBB process from temperature of hydrothermal conditioning as well as NDF and DM concentration in the silage. Results showed a relative reduction of ash and all elements detrimental for combustion in the PC compared to the untreated biomass of 20-90%. Reduction was highest for K and Cl and lowest for N. HHV of PC and untreated biomass were in a comparable range (17.8-19.5 MJ kg-1 DM), but AST of PC was higher (1156-1254°C). Methane yields of PF were higher compared to those of WCD when the biomass was harvested late (end of May and later) and in a comparable range when the biomass was harvested early and ranged from 332 to 458 LN kg-1 VS. Regarding energy and GHG balances, IFBB, with a net energy yield of 11.9-14.1 MWh ha-1, a conversion efficiency of 0.43-0.51, and GHG mitigation of 3.6-4.4 t CO2eq ha-1, performed better than WCD, but worse than CH. WCD produces thermal and electric energy with low efficiency, CH produces only thermal energy with a low quality solid fuel with high efficiency, IFBB produces thermal and electric energy with a solid fuel of high quality with medium efficiency. Regression models were able to predict target parameters with high accuracy (R2=0.70-0.99). The influence of increasing temperature of hydrothermal conditioning was an increase of mass flows, a decrease of element concentrations in the PC and a differing effect on energy conversion efficiency. The influence of increasing NDF concentration of the silage was a differing effect on mass flows, a decrease of element concentrations in the PC and an increase of energy conversion efficiency. The influence of increasing DM concentration of the silage was a decrease of mass flows, an increase of element concentrations in the PC and an increase of energy conversion efficiency. Based on the models an optimised IFBB process would be obtained with a medium temperature of hydrothermal conditioning (50°C), high NDF concentrations in the silage and medium DM concentrations of the silage.

Application of biogas slurries from energy crops to arable soils and their impact on carbon and nitrogen dynamics

The use of renewable primary products as co-substrate or single substrate for biogas production has increased consistently over the last few years. Maize silage is the preferential energy crop used for fermentation due to its high methane (CH4) yield per hectare. Equally, the by-product, namely biogas slurry (BS), is used with increasing frequency as organic fertilizer to return nutrients to the soil and to maintain or increase the organic matter stocks and soil fertility. Studies concerning the application of energy crop-derived BS on the carbon (C) and nitrogen (N) mineralization dynamics are scarce. Thus, this thesis focused on the following objectives: I) The determination of the effects caused by rainfall patterns on the C and N dynamics from two contrasting organic fertilizers, namely BS from maize silage and composted cattle manure (CM), by monitoring emissions of nitrous oxide (N2O), carbon dioxide (CO2) and CH4 as well as leaching losses of C and N. II) The investigation of the impact of differences in soil moisture content after the application of BS and temperature on gaseous emissions (CO2, N2O and CH4) and leaching of C and N compounds. III) A comparison of BS properties obtained from biogas plants with different substrate inputs and operating parameters and their effect on C and N dynamics after application to differently textured soils with varying application rates and water contents. For the objectives I) and II) two experiments (experiment I and II) using undisturbed soil cores of a Haplic Luvisol were carried out. Objective III) was studied on a third experiment (experiment III) with disturbed soil samples. During experiment I three rainfall patterns were implemented including constant irrigation, continuous irrigation with periodic heavy rainfall events, and partial drying with rewetting periods. Biogas slurry and CM were applied at a rate of 100 kg N ha-1. During experiment II constant irrigation and an irrigation pattern with partial drying with rewetting periods were carried out at 13.5°C and 23.5°C. The application of BS took place either directly before a rewetting period or one week after the rewetting period stopped. Experiment III included two soils of different texture which were mixed with ten BS’s originating from ten different biogas plants. Treatments included low, medium and high BS-N application rates and water contents ranging from 50% to 100% of water holding capacity (WHC). Experiment I and II showed that after the application of BS cumulative N2O emissions were 4 times (162 mg N2O-N m-2) higher compared to the application of CM caused by a higher content of mineral N (Nmin) in the form of ammonium (NH4+) in the BS. The cumulative emissions of CO2, however, were on the same level for both fertilizers indicating similar amounts of readily available C after composting and fermentation of organic material. Leaching losses occurred predominantly in the mineral form of nitrate (NO3-) and were higher in BS amended soils (9 mg NO3--N m-2) compared to CM amended soils (5 mg NO3--N m-2). The rainfall pattern in experiment I and II merely affected the temporal production of C and N emissions resulting in reduced CO2 and enhanced N2O emissions during stronger irrigation events, but showed no effect on the cumulative emissions. Overall, a significant increase of CH4 consumption under inconstant irrigation was found. The time of fertilization had no effect on the overall C and N dynamics. Increasing temperature from 13.5°C to 23.5°C enhanced the CO2 and N2O emissions by a factor of 1.7 and 3.7, respectively. Due to the increased microbial activity with increasing temperature soil respiration was enhanced. This led to decreasing oxygen (O2) contents which in turn promoted denitrification in soil due to the extension of anaerobic microsites. Leaching losses of NO3- were also significantly affected by increasing temperature whereas the consumption of CH4 was not affected. The third experiment showed that the input materials of biogas plants affected the properties of the resulting BS. In particular the contents of DM and NH4+ were determined by the amount of added plant biomass and excrement-based biomass, respectively. Correlations between BS properties and CO2 or N2O emissions were not detected. Solely the ammonia (NH3) emissions showed a positive correlation with NH4+ content in BS as well as a negative correlation with the total C (Ct) content. The BS-N application rates affected the relative CO2 emissions (% of C supplied with BS) when applied to silty soil as well as the relative N2O emissions (% of N supplied with BS) when applied to sandy soil. The impacts on the C and N dynamics induced by BS application were exceeded by the differences induced by soil texture. Presumably, due to the higher clay content in silty soils, organic matter was stabilized by organo-mineral interactions and NH4+ was adsorbed at the cation exchange sites. Different water contents induced highest CO2 emissions and therefore optimal conditions for microbial activity at 75% of WHC in both soils. Cumulative nitrification was also highest at 75% and 50% of WHC whereas the relative N2O emissions increased with water content and showed higher N2O losses in sandy soils. In summary it can be stated that the findings of the present thesis confirmed the high fertilizer value of BS’s, caused by high concentrations of NH4+ and labile organic compounds such as readily available carbon. These attributes of BS’s are to a great extent independent of the input materials of biogas plants. However, considerably gaseous and leaching losses of N may occur especially at high moisture contents. The emissions of N2O after field application corresponded with those of animal slurries.