Impact of sward type, cutting date and conditioning temperature on mass and energy flows in the integrated generation of solid fuel and biogas from semi-natural grassland

Energy production from biomass and the conservation of ecologically valuable grassland habitats are two important issues of agriculture today. The combination of a bioenergy production, which minimises environmental impacts and competition with food production for land with a conversion of semi-natural grasslands through new utilization alternatives for the biomass, led to the development of the IFBB process. Its basic principle is the separation of biomass into a liquid fraction (press fluid, PF) for the production of electric and thermal energy after anaerobic digestion to biogas and a solid fraction (press cake, PC) for the production of thermal energy through combustion. This study was undertaken to explore mass and energy flows as well as quality aspects of energy carriers within the IFBB process and determine their dependency on biomass-related and technical parameters. Two experiments were conducted, in which biomass from semi-natural grassland was conserved as silage and subjected to a hydrothermal conditioning and a subsequent mechanical dehydration with a screw press. Methane yield of the PF and the untreated silage was determined in anaerobic digestion experiments in batch fermenters at 37°C with a fermentation time of 13-15 and 27-35 days for the PF and the silage, respectively. Concentrations of dry matter (DM), ash, crude protein (CP), crude fibre (CF), ether extract (EE), neutral detergent fibre (NDF), acid detergent fibre (ADF), acid detergent ligning (ADL) and elements (K, Mg, Ca, Cl, N, S, P, C, H, N) were determined in the untreated biomass and the PC. Higher heating value (HHV) and ash softening temperature (AST) were calculated based on elemental concentration. Chemical composition of the PF and mass flows of all plant compounds into the PF were calculated. In the first experiment, biomass from five different semi-natural grassland swards (Arrhenaterion I and II, Caricion fuscae, Filipendulion ulmariae, Polygono-Trisetion) was harvested at one late sampling (19 July or 31 August) and ensiled. Each silage was subjected to three different temperature treatments (5°C, 60°C, 80°C) during hydrothermal conditioning. Based on observed methane yields and HHV as energy output parameters as well as literature-based and observed energy input parameters, energy and green house gas (GHG) balances were calculated for IFBB and two reference conversion processes, whole-crop digestion of untreated silage (WCD) and combustion of hay (CH). In the second experiment, biomass from one single semi-natural grassland sward (Arrhenaterion) was harvested at eight consecutive dates (27/04, 02/05, 09/05, 16/05, 24/05, 31/05, 11/06, 21/06) and ensiled. Each silage was subjected to six different treatments (no hydrothermal conditioning and hydrothermal conditioning at 10°C, 30°C, 50°C, 70°C, 90°C). Energy balance was calculated for IFBB and WCD. Multiple regression models were developed to predict mass flows, concentrations of elements in the PC, concentration of organic compounds in the PF and energy conversion efficiency of the IFBB process from temperature of hydrothermal conditioning as well as NDF and DM concentration in the silage. Results showed a relative reduction of ash and all elements detrimental for combustion in the PC compared to the untreated biomass of 20-90%. Reduction was highest for K and Cl and lowest for N. HHV of PC and untreated biomass were in a comparable range (17.8-19.5 MJ kg-1 DM), but AST of PC was higher (1156-1254°C). Methane yields of PF were higher compared to those of WCD when the biomass was harvested late (end of May and later) and in a comparable range when the biomass was harvested early and ranged from 332 to 458 LN kg-1 VS. Regarding energy and GHG balances, IFBB, with a net energy yield of 11.9-14.1 MWh ha-1, a conversion efficiency of 0.43-0.51, and GHG mitigation of 3.6-4.4 t CO2eq ha-1, performed better than WCD, but worse than CH. WCD produces thermal and electric energy with low efficiency, CH produces only thermal energy with a low quality solid fuel with high efficiency, IFBB produces thermal and electric energy with a solid fuel of high quality with medium efficiency. Regression models were able to predict target parameters with high accuracy (R2=0.70-0.99). The influence of increasing temperature of hydrothermal conditioning was an increase of mass flows, a decrease of element concentrations in the PC and a differing effect on energy conversion efficiency. The influence of increasing NDF concentration of the silage was a differing effect on mass flows, a decrease of element concentrations in the PC and an increase of energy conversion efficiency. The influence of increasing DM concentration of the silage was a decrease of mass flows, an increase of element concentrations in the PC and an increase of energy conversion efficiency. Based on the models an optimised IFBB process would be obtained with a medium temperature of hydrothermal conditioning (50°C), high NDF concentrations in the silage and medium DM concentrations of the silage.

Einfluss der Flächenwahl, Anbaudichte und Landschaftsstruktur auf den Befallsstatus und die Ausbreitung der Möhrenfliege Psila rosae F. (Diptera: Psilidae) im ökologischen Möhrenanbau

Durch die vermehrte Nachfrage von Biomöhren im Lebensmitteleinzelhandel ist die Anbaufläche ökologisch erzeugter Möhren in den letzten zehn Jahren deutlich angestiegen. Der Anbau konzentriert sich auf bestimmte Regionen und erfolgte damit zunehmend auf großen Schlägen in enger räumlicher und zeitlicher Abfolge. Mit der steigenden Wirtspflanzenpräsenz steigt auch der Befallsdruck durch die Möhrenfliege. Während der Schädling im konventionellen Anbau mit Insektiziden kontrolliert wird, stehen dem Ökologischen Landbau bisher keine direkten Regulative zur Verfügung. Ziel der Untersuchungen war es, unter den Praxisbedingungen des ökologischen Möhrenanbaus einzelbetriebliche und überregionale Muster beteiligter Risikofaktoren im Befallsgeschehen zu identifizieren und so Möglichkeiten einer verbesserten Prävention und Regulation aufzuzeigen. Über einen Zeitraum von drei Jahren wurden auf fünf Betrieben in Niedersachsen und Hessen umfangreiche Felddaten erhoben und diese unter Verwendung von GIS – Software und dem Simulationsmodell SWAT analysiert. Untersuchte Einflussgrößen umfassten (1) die Distanz zu vorjährigen Möhrenfeldern, (2) die zeitliche Möhrenanbauperiode, (3) Vegetationselemente und (4) der experimentelle Einsatz von Fangpflanzen zur Unterdrückung der Fliegenentwicklung. Unter der Berücksichtigung deutlicher einzelbetrieblicher Unterschiede sind die wichtigsten Ergebnisse der Studie wie folgt zu benennen: (1) Auf Betrieben mit Befall im zurückliegenden Anbaujahr zeigte sich die Distanz zu vorjährigen Möhrenfeldern als der wichtigste Risikofaktor. Das Ausbreitungsverhalten der 1. Generation Möhrenfliege erwies sich zudem als situationsgebunden anpassungsfähig. Fliegensumme und Befall waren jeweils in dem zu Vorjahresflächen nächstgelegen Feld am größten, während jeweils dahinter liegende Möhrenschläge entsprechend weniger Fliegenzahlen und Befall auswiesen. Aus den Ergebnissen wird als vorrangige Verbreitungskapazität der 1. Generation Möhrenfliegen innerhalb von 1000 m abgeleitet. (2) Betriebe mit kontinuierlicher Möhren - Anbaubauperiode (ca. April – Oktober), die langfristig die Entwicklung sowohl der 1. als auch der 2. Generation Fliegen unterstützten, verzeichneten stärkere Fliegenprobleme. Hinsichtlich einer verbesserten Prävention wird empfohlen mit einer strikten räumlichen Trennung früher und später Sätze ein Aufschaukeln zwischen den Generationen zu vermeiden. (3) Der Einfluss der Vegetation ließ sich weniger eindeutig interpretieren. Einzelbetriebliche Hinweise, dass Kleingehölze (Hecken und Bäume) im Radius zwischen aktueller und vorjähriger Möhrenfläche die Befallswahrscheinlichkeit erhöhen, konnten mit einem berechneten Gesamtmaß für die regionale holzige Vegetation nicht bestätigt werden. Der großräumigen holzigen Vegetation wird im Vergleich zur Feldrandvegetation daher beim Befallsgeschehen eine geringe Bedeutung zugeschrieben. (4) Drei Meter (vier Dämme) breiter Möhren – Fangstreifen auf den vorjährigen Möhrenfeldern eignen sich bereits ab dem Keimblattstadium, um erhebliches Befallspotential zu binden. Eine mechanische Entfernung der Fangpflanzen (Grubbern) mitsamt dem Befallspotential erzielte in 2008 eine 100 %-ige Unterdrückung der Möhrenfliegenentwicklung, in 2009 jedoch nur zu maximal 41 %. Als mögliche Synthese der Ergebnisse zur Ausbreitung der Möhrenfliegen im Frühjahr und zur zeitlichen Koinzidenz mit der Möhrenentwicklung wird als Empfehlung diskutiert, mit Hilfe einer angepassten Flächenwahl die Fliegenausbreitung räumlich an frühen Sätzen zu binden, um entsprechend befallsarme Regionen für entfernt liegende späte (empfindlichere) Möhrensätze zu schaffen.

Soil, water and nutrient loss under conventional and organic vegetable production managed in small farms

Agricultural systems with conventional tillage and intensive use of agrochemicals, especially those on high slopes and with shallow soils, have the potential to release pollutants. This study aimed at evaluating the soil, water and nutrient lost via agricultural runoff in large plots (small catchments) under conventional and organic farming of vegetables as well as under forest (control) system in a Cambisol in the Campestre catchment. Samples of runoff were collected biweekly for one year through a Coshocton wheel. The soil and water losses from the conventional farming were 218 and 6 times higher, respectively, than forest. Under organic farming the soil and water losses were 12 and 4 times higher, respectively, than forest. However the soil losses (0.5 to 114 kg ha^(−1) year^(−1)) are considered low in agronomy but environmentally represent a potential source of surface water contamination by runoff associated pollutants. The concentrations and losses of all forms of phosphorus (P) were higher in the conventional system (9.5, 0.9 and 0.3 mg L^(−1) of total P for conventional, organic and forest systems, respectively), while the organic system had the highest concentrations and losses of soluble nitrogen (4.7, 38.6 and 0.4 mg L^(−1) of NO_3-N, respectively). The percentage of bioavailable P was proportionally higher in the organic system (91% of total P lost was as bioavailable P), indicating greater potential for pollution in the short term.

Effects of row spacing on productivity and nodulation of two soybean varieties under hot sub-moist tropical conditions in south-western Ethiopia

The objective of this study was to determine the optimum row spacing to improve the productivity of two soybean (Glycine max L.) varieties under the tropical hot sub-moist agroecological conditions of Ethiopia. A two-year split-plot design experiment was conducted to determine the effect of variety (Awasa-95 [early-maturing], Afgat [medium-maturing]) and row spacing (RS: 20, 25, 30, 35, 40, 45, 50, 55, 60 cm) on the productivity, nodulation and weed infestation of soybean. Seed and total dry matter (TDM) yield per ha and per plant, and weed dry biomass per m^2 were significantly affected by RS. Soybean variety had a significant effect on plant density at harvest and some yield components (plant height, number of seeds/pod, and 1000 seed weight). Generally, seed and TDM yield per ha and per plant were high at 40 cm RS, and weed dry biomass per m^2 was higher for RS >= 40 cm than for narrower RS. However, the results did not demonstrate a consistent pattern along the RS gradient. The medium-maturing variety Afgat experienced higher mortality and ended up with lower final plant density at harvest, but higher plant height, number of seeds per pod and 1000 seed weight than the early-maturing variety Awasa-95. The results indicate that 40 cm RS with 5 cm plant spacing within a row can be used for high productivity and low weed infestation of both soybean varieties in the hot sub-moist tropical environment of south-western Ethiopia.