Balancing Economic Development with Environmental Conservation: Challenges Facing the North and South

This paper critically explores how development policies tend to ignore pressing environmental concerns. In the first section development in the North and South and the Bhopal disaster will be juxtaposed to show how development without environmental governance can be deadly. The article then turns to the way in which the Sri Lankan government’s Moragahakanda Development Project strives for economic development without concern for the environment. It will be contended in this article that governments and big companies in the North and South have tended to carelessly use scarce resources for development.

De la désorganisation à l’organisation apprenante en milieu rural

ZUSAMMENFASSUNG Von der „Chaosgruppe“ zur lernenden Organisation. Fallstudien zur Induzierung und Verbreitung von Innovation in ländlichen Kleinorganisationen im Buruli (Zentral-Uganda). Die oft fehlende Nachhaltigkeit landwirtschaftlicher Projekte in Afrika allgemein und in Buruli (Zentral-Uganda) insbesondere gab den Anstoß zu der Forschung, die der vorliegenden Dissertation zugrunde liegt. Ein häufiger Grund für das Scheitern von Projekten ist, dass die lokale Bevölkerung die landwirtschaftliche Innovation als Risiko für die Ernährungssicherheit der Familie betrachtet. Die vorliegende Arbeit ist daher ein Beitrag zur Suche nach einem Weg zur Nachhaltigkeit, der dieser Tatsache Rechnung trägt. Als Forschungsmethode wurden die Gruppendiskussion und die Beobachtung mit den beiden Varianten „teilnehmender Beobachter“ und „beobachtender Teilnehmer“ gemäß Lamnek(1995b) angewendet. Es stellte sich heraus, dass die ablehnende Haltung der Zielbevölkerung landwirtschaftlicher Innovation gegenüber durch finanzielle Anreize, Seminare oder die Überzeugungskunst von Mitarbeitern der Entwicklungsorganisationen kaum behoben werden kann, sondern nur durch den Einbezug der Menschen in einen von ihnen selbst gesteuerten Risikomanagementprozess. Die Prozessberatung von Schein (2000) und die nichtdirektive Beratung von Rogers (2010) haben sich im Rahmen unserer Untersuchung für die Motivierung der Bevölkerung für eine risikobewusste Entwicklungsinitiative von großem Nutzen erwiesen ebenso wie für die Beschreibung dieses Prozesses in der vorliegenden Studie. Die untersuchten Gruppen wurden durch diesen innovativen Ansatz der Entwicklungsberatung in die Lage versetzt, das Risiko von Innovation zu analysieren, zu bewerten und zu minimieren, ihre Zukunft selbst in die Hand zu nehmen und in einem sozialen, ökonomischen und physischen Umfeld zu gestalten sowie auf Veränderungen im Laufe der Umsetzung angemessen zu reagieren. Der Erwerb dieser Fähigkeit setzte eine Umwandlung einfacher Bauerngruppen ohne erkennbare Strukturen in strukturierte und organisierte Gruppen voraus, die einer lernenden Organisation im ländlichen Raum entsprechen. Diese Transformation bedarf als erstes eines Zugangs zur Information und einer zielorientierten Kommunikation. Die Umwandlung der Arbeitsgruppe zu einer lernenden Bauernorganisation förderte die Nachhaltigkeit des Gemüseanbauprojekts und das Risikomanagement und wurde so zu einem konkreten, von der Umwelt wahrgenommenen Beispiel für die Zweckmäßigkeit des oben beschriebenen Forschungsansatzes. Die Herausbildung einer lernenden Organisation ist dabei nicht Mittel zum Zweck, sondern ist selbst das zu erreichende Ziel. Die Beobachtung, Begleitung und Analyse dieses Umwandlungsprozesses erfordert einen multidisziplinären Ansatz. In diesem Fall flossen agrarwissenschaftliche, soziologische, linguistische und anthropologische Perspektiven in die partnerschaftlich ausgerichtete Forschung ein. Von der Entwicklungspolitik erfordert dieser Ansatz einen neuen Weg, der auf der Partnerschaft mit den Betroffenen und auf einer Entemotionalisierung des Entwicklungsvorhabens basiert und eine gegenseitige Wertschätzung zwischen den Akteuren voraussetzt. In diesem Prozess entwickelt sich im Laufe der Zeit die „lernende“ Bauernorganisation auch zu einer „lehrenden“ Organisation und wird dadurch eine Quelle der Inspiration für die Gesamtgesellschaft. Die Nachhaltigkeit von ländlichen Entwicklungsprojekten wird damit maßgeblich verbessert.

The DIADEM Software Development Methodology extended to Multimedia Interfaces

DIADEM, created by THOMSON-CSF, is a methodology for specifying and developing user interfaces. It improves productivity of the interface development process as well as quality of the interface. The method provides support to user interface development in three aspects. (1) DIADEM defines roles of people involved and their tasks and organises the sequence of activities. (2) It provides graphical formalisms supporting information exchange between people. (3) It offers a basic set of rules for optimum human-machine interfaces. The use of DIADEM in three areas (process control, sales support, and multimedia presentation) was observed and evaluated by our laboratory in the European project DIAMANTA (ESPRIT P20507). The method provides an open procedure that leaves room for adaptation to a specific application and environment. This paper gives an overview of DIADEM and shows how to extend formalisms for developing multimedia interfaces.

Impact of floriculture development enhances livelihood of India’s rural women

India’s rural women are involved in various types of work and contribute considerably to the economy. However much of their work is not systematically accounted in the official statistics. India’s governmental and non-governmental data collection agencies admit that there is an under-estimation of tribal women’s contribution as rural workers. This study describes in detail a research project that focuses on the indicators for socioeconomic development in the least developed rural villages by examining the impact of floriculture on the lives of impoverished tribal women who inhabit the harsh drylands of western India.

Development of directly modulated high speed telecommunication lasers based on surface defined feedback gratings

High-speed semiconductor lasers are an integral part in the implemen- tation of high-bit-rate optical communications systems. They are com- pact, rugged, reliable, long-lived, and relatively inexpensive sources of coherent light. Due to the very low attenuation window that exists in the silica based optical fiber at 1.55 μm and the zero dispersion point at 1.3 μm, they have become the mainstay of optical fiber com- munication systems. For the fabrication of lasers with gratings such as, distributed bragg reflector or distributed feedback lasers, etching is the most critical step. Etching defines the lateral dimmensions of the structure which determines the performance of optoelectronic devices. In this thesis studies and experiments were carried out about the exist- ing etching processes for InP and a novel dry etching process was de- veloped. The newly developed process was based on Cl2/CH4/H2/Ar chemistry and resulted in very smooth surfaces and vertical side walls. With this process the grating definition was significantly improved as compared to other technological developments in the respective field. A surface defined grating definition approach is used in this thesis work which does not require any re-growth steps and makes the whole fabrication process simpler and cost effective. Moreover, this grating fabrication process is fully compatible with nano-imprint lithography and can be used for high throughput low-cost manufacturing. With usual etching techniques reported before it is not possible to etch very deep because of aspect ratio dependent etching phenomenon where with increasing etch depth the etch rate slows down resulting in non-vertical side walls and footing effects. Although with our de- veloped process quite vertical side walls were achieved but footing was still a problem. To overcome the challenges related to grating defini- tion and deep etching, a completely new three step gas chopping dry etching process was developed. This was the very first time that a time multiplexed etching process for an InP based material system was demonstrated. The developed gas chopping process showed extra ordinary results including high mask selectivity of 15, moderate etch- ing rate, very vertical side walls and a record high aspect ratio of 41. Both the developed etching processes are completely compatible with nano imprint lithography and can be used for low-cost high-throughput fabrication. A large number of broad area laser, ridge waveguide laser, distributed feedback laser, distributed bragg reflector laser and coupled cavity in- jection grating lasers were fabricated using the developed one step etch- ing process. Very extensive characterization was done to optimize all the important design and fabrication parameters. The devices devel- oped have shown excellent performance with a very high side mode suppression ratio of more than 52 dB, an output power of 17 mW per facet, high efficiency of 0.15 W/A, stable operation over temperature and injected currents and a threshold current as low as 30 mA for almost 1 mm long device. A record high modulation bandwidth of 15 GHz with electron-photon resonance and open eye diagrams for 10 Gbps data transmission were also shown.

India’s Carbon Governance: The Clean Development Mechanism

Carbon Governance systems – institutional arrangements in place for mitigating greenhouse gas emissions – are different in emerging countries. Indeed, carbon is the same everywhere but Carbon Governance isn’t: in Brazil, the financial community is actively interested in carbon trading, but Chinese banks have hardly any interest in it; and while the Chinese government takes an active interest in providing capacity to project developers, the Brazilian authorities see their role uniquely as guarantors of environmental integrity of emissions reductions projects. In the case of India, carbon governance offers specific features of patterns and interactions mostly because India strongly developed the Clean Development Mechanism and its market. This article proposes a study to the research and understanding of how exactly carbon governance works in the Indian case, knowing that India is the second largest host of CDM projects.