Root-induced increases in soil pH and nutrient availability to field-grown cereals and legumes on acid sandy soils of Sudano-Sahelian West Africa

A field experiment with millet (Pennisetum glaucum L.), sorghum [Sorghum bicolor (L.) Moench], cowpea (Vigna unguiculata L.) and groundnut (Arachnis hypogeae L.) was conducted on severely P-deficient acid sandy soils of Niger, Mali and Burkina Faso to measure changes in pH and nutrient availability as affected by distance from the root surface and by mineral fertiliser application. Treatments included three rates of phosphorus (P) and four levels of nitrogen (N) application. Bulk, rhizosphere and rhizoplane soils were sampled at 35, 45 and 75 DAS in 1997 and at 55 and 65 DAS in 1998. Regardless of the cropping system and level of mineral fertiliser applied, soil pH consistently increased between 0.7 and two units from the bulk soil to the rhizoplane of millet. Similar pH gradients were observed in cowpea, but pH changes were much smaller in sorghum with a difference of only 0.3 units. Shifts in pH led to large increases in nutrient availability close to the roots. Compared with the bulk soil, available P in the rhizoplane was between 190 and 270% higher for P-Bray and between 360 and 600% higher for P-water. Exchangeable calcium (Ca) and magnesium (Mg) levels were also higher in the millet rhizoplane than in the bulk soil, whereas exchangeable aluminium (Al) levels decreased with increasing pH close to the root surface. The results suggest an important role of root-induced pH increases for crops to cope with acidity-induced nutrient deficiency and Al stress of soils in the Sudano-Sahelian zone of West Africa.

Ferrocene-Based Pyridylphosphine Ligands – Coordination Chemistry of Group 10, 11 and 12 Metals

English: The present thesis describes the synthesis of 1,1’-ferrocendiyl-based pyridylphosphine ligands, the exploration of their fundamental coordination chemistry and preliminary experiments with selected complexes aimed at potential applications. One main aspect is the synthesis of the bidentate ferrocene-based pyridylphosphine ligands 1-(Pyrid-2-yl)-1’-diphenylphosphinoferrocene, 1-(Pyrid-3-yl)-1’-diphenylphosphinoferrocene and 1-[(Pyrid-2-yl)methyl]-1’-diphenylphosphinoferrocene. A specific feature of these ligands is the ball-bearing like flexibility of the ferrocenebased backbone. An additional flexibility element is the rotation around the C–C single bonds. Consequently, the donor atoms can realise a wide range of positions with respect to each other and are therefore able to adapt to the coordination requirements of different metal centres. The flexibility of the ligand also plays a role in another key aspect of this work, which concerns the coordination mode, i. e. bridging vs. chelating. In addition to the flexibility, also the position of the donor atoms to each other is important. This is largely affected by the position of the pyridyl nitrogen (pyrid-2-yl vs. pyrid-3-yl) and the methylen group in 1-[(Pyrid-2-yl)methyl]-1’-diphenylphosphinoferrocene. Another interesting point is the combination of a soft phosphorus donor atom with a harder nitrogen donor atom, according to the HSAB principle. This combination generates a unique binding profile, since the pi-acceptor character of the P site is able to stabilise a metal centre in a low oxidation state, while the nitrogen sigma-donor ability can make the metal more susceptible to oxidative addition reactions. A P,N-donor combination can afford hemilabile binding profiles, which would be ideal for catalysis. Beyond 1,2-substituted ferrocene derivatives, which are quite successful in catalytic applications, 1,1’-derivatives are rather underrepresented. While a low-yield synthetic pathway to 1-(Pyrid-2-yl)-1’-diphenylphosphinoferrocene was already described in the literature [I. R. Butler, Organometallics 1992, 11, 74.], it was possible to find a new, improved and simplified synthetic pathway. Both other ligands were unknown prior to this work. Satisfactory results in the synthesis of 1-(Pyrid-3-yl)-1’-diphenylphosphinoferrocene could be achieved by working in analogy to the new synthetic procedure for 1-(Pyrid-2-yl)-1’-diphenylphosphinoferrocene. The synthesis of 1-[(Pyrid-2-yl)methyl]-1’-diphenylphosphinoferrocene has been handled by the group of Prof. Petr Stepnicka from Charles University, Prague, Czech Republic. The synthesis of tridentate ligands with an analogous heterodentate arrangement, was investigated briefly as a sideline of this study. The major part of this thesis deals with the fundamental coordination chemistry towards transition metals of the groups 10, 11 and 12. Due to the well-established catalytic properties of analogous palladium complexes, the coordination chemistry towards palladium (group 10) is of particular interest. The metals zinc and cadmium (group 12) are also of substantial importance because they are redox-inert in their divalent state. This is relevant in view of electrochemical investigations concerning the utilisation of the ligands as molecular redox sensors. Also mercury and the monovalent metals silver and gold (group 11) are included because of their rich coordination chemistry. It is essential to answer questions concerning aspects of the ligands’ coordination mode bearing in mind the HSAB principle.

Diversity and nutritional properties of Pakistani dates: implications for sustainable value chain and decent living perspectives of rural households

Date palm (Phoenix dactylifera L.) occupies almost three percent of the total worldwide cultivated area, with an annual production of seven million tonnes (t). Pakistan is an ideal place for the cultivation of date palm due to its sandy loam soil and semi-arid climate. In 2012, Pakistan produced 600,000 t of dates, on an area of 95,000 ha. Baluchistan province is the country’s top date producer, followed by Sindh, Punjab and Khyber Pakhtunkhwa (KPK) provinces. More than 300 date varieties are known to exist in Pakistan and some commercially important cultivars are: Karbalaen, Aseel, Muzawati, Fasli, Begum Jhangi, Hillawi, Dashtiari, Sabzo, Koharaba, Jaan Swore, Rabai and Dhakki. Six districts from the four provinces of Pakistan (Jhang, Muzaffargarh and Bahawalpur (Punjab), Dera Ismail Khan (KPK), Khairpur (Sindh) and Panjgur (Baluchistan)) with largest area under date palm cultivation were selected to conduct socio-economic surveys including the income sources of date palm growers. A structured questionnaire with open-ended and closed questions was used for face-to-face interviews of 170 date palm growers. At each location after selection of a first farmer through a local guide, the former was requested to provide names and addresses of three other date growers in his area. From these three names, one was randomly selected for the next sampling. Additionally, date palm fronds and fruits of all available cultivars were collected for morphological and nutritional analyses. Soil samples were collected from the groves for subsequent chemical and physical analyses. Almost all farmers used dates as a food item for their families and some were using low quality dates as a feed for their livestock. Apart from dates, other date palm components (trunk, spadix, frond, inflorescence and seed) were used by date palm growers as a raw material for making many by-products for their families. Date palm had a major contribution in the income of households, 24% received 91-100% of their income from date palms. More than half of the surveyed farmers had date palm groves, but scattered plantations, home gardens and intercropping systems with cereal and other fruits were also present. Dhakki, Muzawati, Aseel, and Karbalaen were the most important commercial cultivars grown in the provinces of KPK, Baluchistan, and Sindh. Aseel, Karoch, Haleni, Karbalaen, and Muzawati cultivars had the most firm fruit and good total soluble sugar, calcium and magnesium contents. The amount of magnesium found in dates of studied cultivars ranged from 0.143 to 0.876 mg g-1. A great variation in frond morphology was recorded among the cultivars. Fruit length and fruit weight was highest in Dhakki date, making it visually more attractive for customers in addition to its good nutritional properties. The seed weight of the studied cultivars ranged from 0.7-2.0 g, while Desi dates had largest seed, making them less attractive for marketing. However, in terms of nutritional value and fruit size, most of the investigated varieties can compete with globally important commercial dates.

Fliesslochformen und Gewindefurchen in dünne Bleche und Rohre aus Kupfer und Kupferlegierungen

This thesis in Thermal Flow Drilling and Flowtap in thin metal sheet and pipes of copper and copper alloys had as objectives to know the comportment of copper and copper alloys sheet metal during the Thermal Flow Drill processes with normal tools, to know the best Speed and Feed machine data for the best bushing quality, to known the best Speed for Form Tapping processes and to know the best bush long in pure copper pipes for water solar interchange equipment. Thermal Flow Drilling (TFD) and Form Tapping (FT) is one of the research lines of the Institute of Production and Logistics (IPL) at University of Kassel. At December 1995, a work meeting of IPL, Santa Catarina University, Brazil, Buenos Aires University, Argentine, Tarapacá University (UTA), Chile members and the CEO of Flowdrill B.V. was held in Brazil. The group decided that the Manufacturing Laboratory (ML) of UTA would work with pure copper and brass alloys sheet metal and pure copper pipes in order to develop a water interchange solar heater. The Flowdrill BV Company sent tools to Tarapacá University in 1996. In 1999 IPL and the ML carried out an ALECHILE research project promoted by the DAAD and CONICyT in copper sheet metal and copper pipes and sheet metal a-brass alloys. The normal tools are lobed, conical tungsten carbide tool. When rotated at high speed and pressed with high axial force into sheet metal or thin walled tube generated heat softens the metal and allows the drill to feed forward produce a hole and simultaneously form a bushing from the displacement material. In the market exist many features but in this thesis is used short and longs normal tools of TFD. For reach the objectives it was takes as references four qualities of the frayed end bushing, where the best one is the quality class I. It was used pure copper and a-brass alloys sheet metals, with different thickness. It was used different TFD drills diameter for four thread type, from M-5 to M10. Similar to the Aluminium sheet metals studies it was used the predrilling processes with HSS drills around 30% of the TFD diameter (1,5 – 3,0 mm D). In the next step is used only 2,0 mm thick metal sheet, and 9,2 mm TFD diameter for M-10 thread. For the case of pure commercial copper pipes is used for ¾” inch diameter and 12, 8 mm (3/8”) TFD drill for holes for 3/8” pipes and different normal HSS drills for predrilling processes. The chemical sheet metal characteristics were takes as reference for the material behaviour. The Chilean pure copper have 99,35% of Cu and 0,163% of Zinc and the Chilean a-brass alloys have 75,6% of Cu and 24,0% of Zinc. It is used two German a-brass alloys; Nº1 have 61,6% of Cu, 36,03 % of Zinc and 2,2% of Pb and the German a-brass alloys Nº2 have 63,1% of Cu, 36,7% of Zinc and 0% of Pb. The equipments used were a HAAS CNC milling machine centre, a Kistler dynamometer, PC Pentium II, Acquisition card, TESTPOINT and XAct software, 3D measurement machine, micro hardness, universal test machine, and metallographic microscope. During the test is obtained the feed force and momentum curves that shows the material behaviour with TFD processes. In general it is take three phases. It was possible obtain the best machining data for the different sheet of copper and a-brass alloys thick of Chilean materials and bush quality class I. In the case of a-brass alloys, the chemical components and the TFD processes temperature have big influence. The temperature reach to 400º Celsius during the TFD processes and the a-brass alloys have some percents of Zinc the bush quality is class I. But when the a-brass alloys have some percents of Lead who have 200º C melting point is not possible to obtain a bush, because the Lead gasify and the metallographic net broke. During the TFD processes the recrystallization structures occur around the Copper and a-brass alloy bush, who gives more hardness in these zones. When the threads were produce with Form Tapping processes with Flowtap tools, this hardness amount gives a high limit load of the thread when hey are tested in a special support that was developed for it. For eliminated the predrilling processes with normal HSS drills it was developed a compound tool. With this new tool it was possible obtain the best machining data for quality class I bush. For the copper pipes it is made bush without predrilling and the quality class IV was obtained. When it is was used predrilling processes, quality classes I bush were obtained. Then with different HSS drill diameter were obtained different long bush, where were soldering with four types soldering materials between pipes with 3/8” in a big one as ¾”. Those soldering unions were tested by traction test and all the 3/8” pipes broken, and the soldering zone doesn’t have any problem. Finally were developed different solar water interchange heaters and tested. As conclusions, the present Thesis shows that the Thermal Flow Drilling in thinner metal sheets of cooper and cooper alloys needs a predrilling process for frayed end quality class I bushings, similar to thinner sheets of aluminium bushes. The compound tool developed could obtain quality class I bushings and excludes predrilling processes. The bush recrystalization, product of the friction between the tool and the material, the hardness grows and it is advantageous for the Form Tapping. The methodology developed for commercial copper pipes permits to built water solar interchange heaters.

Cultivating the City: Infrastructures of abundance in urban Brazil

Urban agriculture, if it is to become integrated into the city, needs landscape architectural thinking in order to be woven into the larger urban fabric. Thinking at the scale of ecosystems running through a city creates a framework for spatial change; thinking in assemblages of stakeholders and actors creates a framework for social investment and development. These overlapping frameworks are informed and perhaps even defined by the emergent field of landscape democracy. Cultivating the City is a prospective design project seeking to embody landscape democratic principles. The intention is to reclaim the meaning of landscape as the relationship between people and place, both shaping each other. The design in question is a proposed network of urban agriculture typologies in Porto Alegre, Brazil. These hypothetical designs, emphasizing agroforestry with native species, serve as a basis for dialogue between potential stakeholders and as catalysts for future projects. This landscape architecture project sets out to be a mediator in processes of spatial evolution in order to envision just and sustainable urban landscapes.