Perspectives of Urban Growth Management and Sustainable Development In West Bank, Hebron District as a case Study

The main objective of this PhD research study is to provide a perspective on the urban growth management and sustainable development in Palestine, and more specifically in Hebron district as a case study. Hebron is located 36 km south of Jerusalem, with an overall population size of around 600,000 people living in a total area around1246km2. Hebron is the biggest Palestinian district that has 16 municipalities and 154 localities. The research discusses and analyzes the urban planning system, economical and environmental policies and the solution required to manage and integrate the development elements to develop a sustainable development plan for Hebron. The research provides answers for fundamental questions such as what kind and definition of sustainable development are applicable to the Palestinian case?. What are the sustainability problems there and how the Israeli occupation and unstable political condition affect the sustainable development in Palestine? What are the urban growth management and sustainability policies and actions required from government, public and privets sector in Palestine? The fast urban growth in Palestine is facing many problems and challenges due to the increase in the population size and the resulting impact of this increase including, but not limited to, the demand of new houses, need for more infrastructure services, demands on new industrial, commercial, educational and health projects, which in turn reduces the area of agricultural lands and threatens the natural resources and environment. There are also other associated sustainability problems like the absence of effective plans or regulations that control urban expansion, the absence of sufficient sustainable development plans at the national levels for the district, new job requirements, Israeli restrictions and occupation for more than 60 years, existence of construction factories near residential areas, poor public awareness and poor governmental funds for service projects and development plans. The study consists of nine chapters. Chapter One includes an introduction, study objectives, problems and justifications, while Chapter Two has a theoretical background on sustainability topic and definitions of sustainability. The Palestinian urban planning laws and local government systems are discussed in Chapter Three and the methodology of research is detailed in Chapter Four. As for Chapter Five, it provides a general background on Hebron District including demographical and economical profiles, along with recommendations related to sustainable development for each profile Chapter Six addresses the urban environment, sustainability priorities and policies required. Chapter Seven discusses and analyzes infrastructure services including transportation, water and wastewater. As for Chapter Eight, it addresses the land use, housing and urban expansion beside the cultural heritage, natural heritage with relevant sustainable development polices and recommendations. Finally, Chapter Nine includes a conclusion and comprehensive recommendations integrating all of urban and sustainability event in one map. Hebron has a deep history including a rich cultural heritage aged by thousands of years, with 47% of Hebron district population under 14 years old. Being the biggest Palestinian district, Hebron has thousands of industrial and economical organizations beside a large agricultural sector at Palestine level. This gives Hebron a potential to play major roles in developing a national sustainability plan, as the current urban planning system in Palestine needs urgent reform and development to fulfill the sustainability requirement. The municipalities and ministers should find permanent financial aid for urban planning and development studies so as to face future challenges. The Palestinian government can benefit from available local human resources in development projects; hence Palestinian people have sufficient qualifications in most sectors. The Palestinian people also can invest in the privet sector in Palestine in case businessmen have been encouraged and clear investment laws and plans have been developed. The study provides recommendations associated to the sustainable development in Palestine in general and Hebron, as a case study, in specific. Recommendations include increasing the privet sector as well as the public involvement in urban growth management, and stopping unplanned urban expansion, subjecting granting building permits of new projects to the no-harm environmental impact assessment, increasing the coordination and cooperation between localities and central bodies, protection and renovation of old cites and green areas, increasing the quality and quantity of infrastructure services, establishing district urban planning department to coordinate and organize urban planning and sustainable development activities. Also, among recommendations come dividing Hebron into three planning and administrative areas (north, central and south), and dividing the sustainable development and implementation period (2010 to 2025) into three main phases. Finally, the study strongly recommends benefiting from the same urban development plans in similar districts at national and international levels, also to use new technologies and information systems in urban planning process.

Modellbasiertes Service Level Management verteilter Anwendungssysteme

Zur Senkung von Kosten werden in vielen Unternehmen Dienstleistungen, die nicht zur Kernkompetenz gehören, an externe Dienstleister ausgelagert. Dieser Prozess wird auch als Outsourcing bezeichnet. Die dadurch entstehenden Abhängigkeiten zu den externen Dienstleistern werden mit Hilfe von Service Level Agreements (SLAs) vertraglich geregelt. Die Aufgabe des Service Level Managements (SLM) ist es, die Einhaltung der vertraglich fixierten Dienstgüteparameter zu überwachen bzw. sicherzustellen. Für eine automatische Bearbeitung ist daher eine formale Spezifikation von SLAs notwendig. Da der Markt eine Vielzahl von unterschiedlichen SLM-Werkzeugen hervorgebracht hat, entstehen in der Praxis Probleme durch proprietäre SLA-Formate und fehlende Spezifikationsmethoden. Daraus resultiert eine Werkzeugabhängigkeit und eine limitierte Wiederverwendbarkeit bereits spezifizierter SLAs. In der vorliegenden Arbeit wird ein Ansatz für ein plattformunabhängiges Service Level Management entwickelt. Ziel ist eine Vereinheitlichung der Modellierung, so dass unterschiedliche Managementansätze integriert und eine Trennung zwischen Problem- und Technologiedomäne erreicht wird. Zudem wird durch die Plattformunabhängigkeit eine hohe zeitliche Stabilität erstellter Modelle erreicht. Weiteres Ziel der Arbeit ist, die Wiederverwendbarkeit modellierter SLAs zu gewährleisten und eine prozessorientierte Modellierungsmethodik bereitzustellen. Eine automatisierte Etablierung modellierter SLAs ist für eine praktische Nutzung von entscheidender Relevanz. Zur Erreichung dieser Ziele werden die Prinzipien der Model Driven Architecture (MDA) auf die Problemdomäne des Service Level Managements angewandt. Zentrale Idee der Arbeit ist die Definition von SLA-Mustern, die konfigurationsunabhängige Abstraktionen von Service Level Agreements darstellen. Diese SLA-Muster entsprechen dem Plattformunabhängigen Modell (PIM) der MDA. Durch eine geeignete Modelltransformation wird aus einem SLA-Muster eine SLA-Instanz generiert, die alle notwendigen Konfigurationsinformationen beinhaltet und bereits im Format der Zielplattform vorliegt. Eine SLA-Instanz entspricht damit dem Plattformspezifischen Modell (PSM) der MDA. Die Etablierung der SLA-Instanzen und die daraus resultierende Konfiguration des Managementsystems entspricht dem Plattformspezifischen Code (PSC) der MDA. Nach diesem Schritt ist das Managementsystem in der Lage, die im SLA vereinbarten Dienstgüteparameter eigenständig zu überwachen. Im Rahmen der Arbeit wurde eine UML-Erweiterung definiert, die eine Modellierung von SLA-Mustern mit Hilfe eines UML-Werkzeugs ermöglicht. Hierbei kann die Modellierung rein graphisch als auch unter Einbeziehung der Object Constraint Language (OCL) erfolgen. Für die praktische Realisierung des Ansatzes wurde eine Managementarchitektur entwickelt, die im Rahmen eines Prototypen realisiert wurde. Der Gesamtansatz wurde anhand einer Fallstudie evaluiert.

Offline Emergence Engineering For Agent Societies

Many examples for emergent behaviors may be observed in self-organizing physical and biological systems which prove to be robust, stable, and adaptable. Such behaviors are often based on very simple mechanisms and rules, but artificially creating them is a challenging task which does not comply with traditional software engineering. In this article, we propose a hybrid approach by combining strategies from Genetic Programming and agent software engineering, and demonstrate that this approach effectively yields an emergent design for given problems.

Kooperationspotenziale 'Grüner Werkstätten' und Beschäftigungspotenziale landwirtschaftlicher Betriebe sowie des branchennahen Handwerks für Menschen mit Behinderung

In den bundesweit rund 670 anerkannten Werkstätten für behinderte Menschen (WfbM) arbeiten aktuell über 290 000 Menschen mit Behinderung. Rund ein Viertel dieser Einrichtungen bieten auch landwirtschaftliche oder gartenbauliche Arbeitsplätze (`Grüne WfbM´). Die UN-Behindertenrechtskonvention fordert u. a. eine inklusive Teilhabe der Menschen mit Behinderung am Arbeitsleben in Form von Zugangsmöglichkeiten zu sozialversicherungspflichtiger Beschäftigung auf dem allgemeinen Arbeitsmarkt. Gleichzeitig können arbeitswirtschaftlich immer mehr landwirtschaftliche Betriebe aufgrund wachsender Betriebsgrößen nicht mehr allein durch die Unternehmerfamilie geführt werden. Neben der Zuhilfenahme von Dienstleistungsanbietern ist die Suche nach Fremdarbeitskräften zwangsläufig. Neben dem Bedarf an qualifiziertem Fachpersonal werden auch Arbeitskräfte für einfachere, tägliche Routinearbeiten gesucht. Die vorliegende Arbeit begleitet wissenschaftlich ein vom Bundesministerium für Ernährung, Landwirtschaft und Verbraucherschutz gefördertes bundesweites Modellvorhaben zur Vernetzung `Grüner WfbM´ mit landwirtschaftlichen Betrieben. Forschungsleitende Fragestellungen sind die betrieblichen Interessen und Voraussetzungen aus Sicht der landwirtschaftlichen Betriebe für die Beschäftigung von Menschen mit Behinderung sowie für bilaterale Kooperationen mit diesen Einrichtungen. Anhand von 44 Betriebsinterviews und unter Anwendung einer qualitativen, rechnerbasierten Fallstudienanalyse zeigen die Ergebnisse eine Vielzahl von Möglichkeiten wirtschaftlich tragfähiger Beschäftigung behinderter Menschen auch in Kernproduktionsprozessen. Unabdingbar dafür sind angepasste Sozialtugenden und ausreichende Arbeitsmotivation auf Arbeitnehmerseite sowie eine offen-innovative und sozial geprägte Grundeinstellung auf Betriebsleitungsseite. Betriebe wünschen sich dauerhafte und verlässliche Arbeitsverhältnisse. Praktika oder gar Experimente kommen für sie eher nicht in Frage. Weniger als 10% aller `Grünen WfbM´ kooperieren bilateral mit umliegenden Betrieben. Dort wo keine Kontakte bestehen, sind Vorbehalte seitens der Landwirte hinsichtlich Wettbewerbsverzerrungen durch vermeintliche Sozialsubventionierung bzw. im Wettbewerb um Ressourcen (z.B. Land) gegenüber den Einrichtungen anzutreffen. Kooperationen fördern gegenseitiges Verständnis und sind so auch idealer `Türöffner´ für Beschäftigungsverhältnisse.

Optimization of Processing Technology for Commercial Drying of Bananas (Matooke)

Summary - Cooking banana is one of the most important crops in Uganda; it is a staple food and source of household income in rural areas. The most common cooking banana is locally called matooke, a Musa sp triploid acuminate genome group (AAA-EAHB). It is perishable and traded in fresh form leading to very high postharvest losses (22-45%). This is attributed to: non-uniform level of harvest maturity, poor handling, bulk transportation and lack of value addition/processing technologies, which are currently the main challenges for trade and export, and diversified utilization of matooke. Drying is one of the oldest technologies employed in processing of agricultural produce. A lot of research has been carried out on drying of fruits and vegetables, but little information is available on matooke. Drying of matooke and milling it to flour extends its shelf-life is an important means to overcome the above challenges. Raw matooke flour is a generic flour developed to improve shelf stability of the fruit and to find alternative uses. It is rich in starch (80 - 85%db) and subsequently has a high potential as a calorie resource base. It possesses good properties for both food and non-food industrial use. Some effort has been done to commercialize the processing of matooke but there is still limited information on its processing into flour. It was imperative to carry out an in-depth study to bridge the following gaps: lack of accurate information on the maturity window within which matooke for processing into flour can be harvested leading to non-uniform quality of matooke flour; there is no information on moisture sorption isotherm for matooke from which the minimum equilibrium moisture content in relation to temperature and relative humidity is obtainable, below which the dry matooke would be microbiologically shelf-stable; and lack of information on drying behavior of matooke and standardized processing parameters for matooke in relation to physicochemical properties of the flour. The main objective of the study was to establish the optimum harvest maturity window and optimize the processing parameters for obtaining standardized microbiologically shelf-stable matooke flour with good starch quality attributes. This research was designed to: i) establish the optimum maturity harvest window within which matooke can be harvested to produce a consistent quality of matooke flour, ii) establish the sorption isotherms for matooke, iii) establish the effect of process parameters on drying characteristics of matooke, iv) optimize the drying process parameters for matooke, v) validate the models of maturity and optimum process parameters and vi) standardize process parameters for commercial processing of matooke. Samples were obtained from a banana plantation at Presidential Initiative on Banana Industrial Development (PIBID), Technology Business Incubation Center (TBI) at Nyaruzunga – Bushenyi in Western Uganda. A completely randomized design (CRD) was employed in selecting the banana stools from which samples for the experiments were picked. The cultivar Mbwazirume which is soft cooking and commonly grown in Bushenyi was selected for the study. The static gravitation method recommended by COST 90 Project (Wolf et al., 1985), was used for determination of moisture sorption isotherms. A research dryer developed for this research. All experiments were carried out in laboratories at TBI. The physiological maturity of matooke cv. mbwazirume at Bushenyi is 21 weeks. The optimum harvest maturity window for commercial processing of matooke flour (Raw Tooke Flour - RTF) at Bushenyi is between 15-21 weeks. The finger weight model is recommended for farmers to estimate harvest maturity for matooke and the combined model of finger weight and pulp peel ratio is recommended for commercial processors. Matooke isotherms exhibited type II curve behavior which is characteristic of foodstuffs. The GAB model best described all the adsorption and desorption moisture isotherms. For commercial processing of matooke, in order to obtain a microbiologically shelf-stable dry product. It is recommended to dry it to moisture content below or equal to 10% (wb). The hysteresis phenomenon was exhibited by the moisture sorption isotherms for matooke. The isoteric heat of sorption for both adsorptions and desorption isotherms increased with decreased moisture content. The total isosteric heat of sorption for matooke: adsorption isotherm ranged from 4,586 – 2,386 kJ/kg and desorption isotherm from 18,194– 2,391 kJ/kg for equilibrium moisture content from 0.3 – 0.01 (db) respectively. The minimum energy required for drying matooke from 80 – 10% (wb) is 8,124 kJ/kg of water removed. Implying that the minimum energy required for drying of 1 kg of fresh matooke from 80 - 10% (wb) is 5,793 kJ. The drying of matooke takes place in three steps: the warm-up and the two falling rate periods. The drying rate constant for all processing parameters ranged from 5,793 kJ and effective diffusivity ranged from 1.5E-10 - 8.27E-10 m2/s. The activation energy (Ea) for matooke was 16.3kJ/mol (1,605 kJ/kg). Comparing the activation energy (Ea) with the net isosteric heat of sorption for desorption isotherm (qst) (1,297.62) at 0.1 (kg water/kg dry matter), indicated that Ea was higher than qst suggesting that moisture molecules travel in liquid form in matooke slices. The total color difference (ΔE*) between the fresh and dry samples, was lowest for effect of thickness of 7 mm, followed by air velocity of 6 m/s, and then drying air temperature at 70˚C. The drying system controlled by set surface product temperature, reduced the drying time by 50% compared to that of a drying system controlled by set air drying temperature. The processing parameters did not have a significant effect on physicochemical and quality attributes, suggesting that any drying air temperature can be used in the initial stages of drying as long as the product temperature does not exceed gelatinization temperature of matooke (72˚C). The optimum processing parameters for single-layer drying of matooke are: thickness = 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode. From practical point of view it is recommended that for commercial processing of matooke, to employ multi-layer drying of loading capacity equal or less than 7 kg/m², thickness 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode.

Metallische Nanopartikel auf Quarz

This work presents the developement of an chemically stable and easy to produce in situ sensor for fast and reliable detection of polycyclic aromatic hydrocarbons (PAH) in low nanomolar concentrations. Metallic nanoparticles on dielectric substrates werde used for the rst time with surface enhanced Raman spectroscopy (SERS) in combination with shifted excitation Raman difference spectroscopy (SERDS). The preparation of the metallic nanoparticle ensembles with Volmer-Webergrowth is described first. The nanoparticles are characterized with both, optical spectroscopy and atomic force microscopy. The morphological properties of the nanoparticle ensembles are de ned by the mean axial ratio (a/b) and the mean equivalent radius (R Äq), respectively. The prepared and characterized nanoparticles were then used for intensive Raman spectroscopy measurements. Two sophisticated diode laser systems were used in cooperation with the TU Berlin, to carry out these experiments. The first step was to establish the ideal combination of excitation wavelength of the diode laser and the maximum of the surface plasmon resonance of the nanoparticle ensembles. From these results it was deduced, that for an optimum Raman signal the plasmon resonance maximum of the nanoparticle ensemble has to be red-shifted a few nanometeres in respect to the excitation wavelength. Different PAHs werde detected in concentrations of only 2 and 0.5 nmol/, respectively. Furthermore, the obtained results show an excellent reproducability. In addition the time dependence of the Raman signal intensity was investigated. The results of these measurements show, that only 2 minutes after placing the substrates in the molecular solution, a detectable Raman signal was generated. The maximum Raman signal, i.e. the time in which the molecular adsorption process is finished, was determined to about 10 minutes. In summary it was shown, that the used metallic nanoparticle ensembles are highly usable as substrates for SERS in combination with SERDS to detect PAHs in low nanomolar concentrations.