Development and Integration of Biocontrol Products in Branched Broomrape (Phelipanche ramosa) management in Tomato

Parasitic weeds of the genera Striga, Orobanche, and Phelipanche pose a severe problem for agriculture because they are difficult to control and are highly destructive to several crops. The present work was carried out during the period October, 2009 to February, 2012 to evaluate the potential of arbuscular mycorrhizal fungi (AMF) to suppress P. ramosa on tomatoes and to investigate the effects of air-dried powder and aqueous extracts from Euphorbia hirta on germination and haustorium initiation in Phelipanche ramosa. The work was divided into three parts: a survey of the indigenous mycorrhizal flora in Sudan, second, laboratory and greenhouse experiments (conducted in Germany and Sudan) to construct a base for the third part, which was a field trial in Sudan. A survey was performed in 2009 in the White Nile state, Sudan to assess AMF spore densities and root colonization in nine fields planted with 13 different important agricultural crops. In addition, an attempt was made to study the relationship between soil physico-chemical properties and AMF spore density, colonization rate, species richness and other diversity indices. The mean percentage of AMF colonization was 34%, ranging from 19-50%. The spore densities (expressed as per 100 g dry soil) retrieved from the rhizosphere of different crops were relatively high, varying from 344 to 1222 with a mean of 798. There was no correlation between spore densities in soil and root colonization percentage. A total of 45 morphologically classifiable species representing ten genera of AMF were detected with no correlation between the number of species found in a soil sample and the spore density. The most abundant genus was Glomus (20 species). The AMF diversity expressed by the Shannon–Weaver index was highest in sorghum (H\= 2.27) and Jews mallow (H\= 2.13) and lowest in alfalfa (H\= 1.4). With respect to crop species, the genera Glomus and Entrophospora were encountered in almost all crops, except for Entrophospora in alfalfa. Kuklospora was found only in sugarcane and sorghum. The genus Ambispora was recovered only in mint and okra, while mint and onion were the only species on which no Acaulospora was found. The hierarchical cluster analysis based on the similarity among AMF communities with respect to crop species overall showed that species compositions were relatively similar with the highest dissimilarity of about 25% separating three of the mango samples and the four sorghum samples from all other samples. Laboratory experiments studied the influence of root and stem exudates of three tomato varieties infected by three different Glomus species on germination of P. ramosa. Root exudates were collected 21or 42 days after transplanting (DAT) and stem exudates 42 DAT and tested for their effects on germination of P. ramosa seeds in vitro. The tomato varieties studied did not have an effect on either mycorrhizal colonization or Phelipanche germination. Germination in response to exudates from 42 day old mycorrhizal plants was significantly reduced in comparison to non-mycorrhizal controls. Germination of P. ramosa in response to root exudates from 21 day old plants was consistently higher than for 42 day-old plants (F=121.6; P<.0001). Stem diffusates from non-mycorrhizal plants invariably elicited higher germination than diffusates from the corresponding mycorrhizal ones and differences were mostly statistically significant. A series of laboratory experiments was undertaken to investigate the effects of aqueous extracts from Euphorbia hirta on germination, radicle elongation, and haustorium initiation in P. ramosa. P. ramosa seeds conditioned in water and subsequently treated with diluted E. hirta extract (10-25% v/v) displayed considerable germination (47-62%). Increasing extract concentration to 50% or more reduced germination in response to the synthetic germination stimulants GR24 and Nijmegen-1 in a concentration dependent manner. P. ramosa germlings treated with diluted Euphorbia extract (10-75 % v/v) displayed haustorium initiation comparable to 2, 5-Dimethoxy-p-benzoquinon (DMBQ) at 20 µM. Euphorbia extract applied during conditioning reduced haustorium initiation in a concentration dependent manner. E. hirta extract or air-dried powder, applied to soil, induced considerable P. ramosa germination. Pot experiments were undertaken in a glasshouse at the University of Kassel, Germany, to investigate the effects of P. ramosa seed bank on tomato growth parameters. Different Phelipanche seed banks were established by mixing the parasite seeds (0 - 32 mg) with the potting medium in each pot. P. ramosa reduced all tomato growth parameters measured and the reduction progressively increased with seed bank. Root and total dry matter accumulation per tomato plant were most affected. P. ramosa emergence, number of tubercles, and tubercle dry weight increased with the seed bank and were, invariably, maximal with the highest seed bank. Another objective was to determine if different AM fungi differ in their effects on the colonization of tomatoes with P. ramosa and the performance of P. ramosa after colonization. Three AMF species viz. GIomus intraradices, Glomus mosseae and Glomus Sprint® were used in this study. For the infection, P. ramosa seeds (8 mg) were mixed with the top 5 cm soil in each pot. No mycorrhizal colonization was detected in un-inoculated control plants. P. ramosa infested, mycorrhiza inoculated tomato plants had significantly lower AMF colonization compared to plants not infested with P. ramosa. Inoculation with G. intraradices, G. mosseae and Glomus Sprint® reduced the number of emerged P. ramosa plants by 29.3, 45.3 and 62.7% and the number of tubercles by 22.2, 42 and 56.8%, respectively. Mycorrhizal root colonization was positively correlated with number of branches and total dry matter of tomatoes. Field experiments on tomato undertaken in 2010/12 were only partially successful because of insect infestations which resulted in the complete destruction of the second run of the experiment. The effects of the inoculation with AMF, the addition of 10 t ha-1 filter mud (FM), an organic residues from sugar processing and 36 or 72 kg N ha-1 on the infestation of tomatoes with P. ramosa were assessed. In un-inoculated control plants, AMF colonization ranged between 13.4 to 22.1% with no significant differences among FM and N treatments. Adding AMF or FM resulted in a significant increase of branching in the tomato plants with no additive effects. Dry weights were slightly increased through FM application when no N was applied and significantly at 36 kg N ha-1. There was no effect of FM on the time until the first Phelipanche emerged while AMF and N application interacted. Especially AMF inoculation resulted in a tendency to delayed P. ramosa emergence. The marketable yield was extremely low due to the strong fruit infestation with insects mainly whitefly Bemisia tabaci and tomato leaf miner (Tuta absoluta). Tomatoes inoculated with varied mycorrhiza species displayed different response to the insect infestation, as G. intraradices significantly reduced the infestation, while G. mosseae elicited higher insect infestation. The results of the present thesis indicate that there may be a potential of developing management strategies for P. ramosa targeting the pre-attachment stage namely germination and haustorial initiation using plant extracts. However, ways of practical use need to be developed. If such treatments can be combined with AMF inoculation also needs to be investigated. Overall, it will require a systematic approach to develop management tools that are easily applicable and affordable to Sudanese farmers. It is well-known that proper agronomical practices such as the design of an optimum crop rotation in cropping systems, reduced tillage, promotion of cover crops, the introduction of multi-microbial inoculants, and maintenance of proper phosphorus levels are advantageous if the mycorrhiza protection method is exploited against Phelipanche ramosa infestation. Without the knowledge about the biology of the parasitic weeds by the farmers and basic preventive measures such as hygiene and seed quality control no control strategy will be successful, however.

Low-Cost Micromechanically Tunable Optical Devices: Strained Resonator Engineering, Technological Implementation and Characterization

The rapid growth of the optical communication branches and the enormous demand for more bandwidth require novel networks such as dense wavelength division multiplexing (DWDM). These networks enable higher bitrate transmission using the existing optical fibers. Micromechanically tunable optical microcavity devices like VCSELs, Fabry-Pérot filters and photodetectors are core components of these novel DWDM systems. Several air-gap based tunable devices were successfully implemented in the last years. Even though these concepts are very promising, two main disadvantages are still remaining. On the one hand, the high fabrication and integration cost and on the other hand the undesired adverse buckling of the suspended membranes. This thesis addresses these two problems and consists of two main parts: • PECVD dielectric material investigation and stress control resulting in membranes shape engineering. • Implementation and characterization of novel tunable optical devices with tailored shapes of the suspended membranes. For this purposes, low-cost PECVD technology is investigated and developed in detail. The macro- and microstress of silicon nitride and silicon dioxide are controlled over a wide range. Furthermore, the effect of stress on the optical and mechanical properties of the suspended membranes and on the microcavities is evaluated. Various membrane shapes (concave, convex and planar) with several radii of curvature are fabricated. Using this resonator shape engineering, microcavity devices such as non tunable and tunable Fabry-Pérot filters, VCSELs and PIN photodetectors are succesfully implemented. The fabricated Fabry-Pérot filters cover a spectral range of over 200nm and show resonance linewidths down to 1.5nm. By varying the stress distribution across the vertical direction within a DBR, the shape and the radius of curvature of the top membrane are explicitely tailored. By adjusting the incoming light beam waist to the curvature, the fundamental resonant mode is supported and the higher order ones are suppressed. For instance, a tunable VCSEL with 26 nm tuning range, 400µW maximal output power, 47nm free spectral range and over 57dB side mode suppresion ratio (SMSR) is demonstrated. Other technologies, such as introducing light emitting organic materials in microcavities are also investigated.

Conceptual structures represented by conceptual graphs and formal concept analysis

Conceptual Graphs and Formal Concept Analysis have in common basic concerns: the focus on conceptual structures, the use of diagrams for supporting communication, the orientation by Peirce's Pragmatism, and the aim of representing and processing knowledge. These concerns open rich possibilities of interplay and integration. We discuss the philosophical foundations of both disciplines, and analyze their specific qualities. Based on this analysis, we discuss some possible approaches of interplay and integration.

Conceptual knowledge discovery and data analysis

In this paper, we discuss Conceptual Knowledge Discovery in Databases (CKDD) in its connection with Data Analysis. Our approach is based on Formal Concept Analysis, a mathematical theory which has been developed and proven useful during the last 20 years. Formal Concept Analysis has led to a theory of conceptual information systems which has been applied by using the management system TOSCANA in a wide range of domains. In this paper, we use such an application in database marketing to demonstrate how methods and procedures of CKDD can be applied in Data Analysis. In particular, we show the interplay and integration of data mining and data analysis techniques based on Formal Concept Analysis. The main concern of this paper is to explain how the transition from data to knowledge can be supported by a TOSCANA system. To clarify the transition steps we discuss their correspondence to the five levels of knowledge representation established by R. Brachman and to the steps of empirically grounded theory building proposed by A. Strauss and J. Corbin.

From Market- to Development Orientation - The Trade Aspect of Food Security and Agriculture

Trade rules are suggested to be one of the reasons for the hunger in the world and environmental damage. As current trade rules encourage market orientation and therefore specialization and industrialization of agriculture, which has as side effects rural hunger and environmental damage, there is room for improvement in the international trade regime. One main finding of Nexus Foundations' work in Geneva is a possible new orientation for agricultural and food markets – an orientation on development, rather than purely on markets. This development orientation consists of several elements from development of soil fertility to local markets and consumer relatedness. Since the Bali Ministerial in 2013, the WTO has set up a four year work programme on the issue of food security related to food reserves. This opens the chance to discuss broader food security issues in the realm of trade negotiations.

Konzeption eines generischen Vorgehensmodells zur strategieorientierten und partizipativen Einführung komplexer Softwaresysteme unter Berücksichtigung organisatorischer Gestaltungsprozesse

Die Dissertation befasst sich mit der Einführung komplexer Softwaresysteme, die, bestehend aus einer Kombination aus parametrisierter Standardsoftware gepaart mit Wettbewerbsvorteil sichernden Individualsoftwarekomponenten, keine Software-Engineering-Projekte im klassischen Sinn mehr darstellen, sondern einer strategieorientierten Gestaltung von Geschäftsprozessen und deren Implementierung in Softwaresystemen bedürfen. Die Problemstellung einer adäquaten Abwägung zwischen TCO-optimierender Einführung und einer gleichzeitigen vollständigen Unterstützung der kritischen Erfolgsfaktoren des Unternehmens ist hierbei von besonderer Bedeutung. Der Einsatz integrierter betriebswirtschaftlicher Standardsoftware, mit den Möglichkeiten einer TCO-Senkung, jedoch ebenfalls der Gefahr eines Verlustes von Alleinstellungsmerkmalen am Markt durch Vereinheitlichungstendenzen, stellt ein in Einführungsprojekten wesentliches zu lösendes Problem dar, um Suboptima zu vermeiden. Die Verwendung von Vorgehensmodellen, die sich oftmals an klassischen Softwareentwicklungsprojekten orientieren oder vereinfachte Phasenmodelle für das Projektmanagement darstellen, bedingt eine fehlende Situationsadäquanz in den Detailsituationen der Teilprojekte eines komplexen Einführungsprojektes. Das in dieser Arbeit entwickelte generische Vorgehensmodell zur strategieorientierten und partizipativen Einführung komplexer Softwaresysteme im betriebswirtschaftlichen Anwendungsbereich macht - aufgrund der besonders herausgearbeiteten Ansätze zu einer strategieorientierten Einführung, respektive Entwicklung derartiger Systeme sowie aufgrund der situationsadäquaten Vorgehensstrategien im Rahmen der Teilprojektorganisation � ein Softwareeinführungsprojekt zu einem Wettbewerbsfaktor stärkenden, strategischen Element im Unternehmen. Die in der Dissertation diskutierten Überlegungen lassen eine Vorgehensweise präferieren, die eine enge Verschmelzung des Projektes zur Organisationsoptimierung mit dem Softwareimplementierungsprozess impliziert. Eine Priorisierung der Geschäftsprozesse mit dem Ziel, zum einen bei Prozessen mit hoher wettbewerbsseitiger Priorität ein organisatorisches Suboptimum zu vermeiden und zum anderen trotzdem den organisatorischen Gestaltungs- und den Systemimplementierungsprozess schnell und ressourcenschonend durchzuführen, ist ein wesentliches Ergebnis der Ausarbeitungen. Zusätzlich führt die Ausgrenzung weiterer Prozesse vom Einführungsvorgang zunächst zu einem Produktivsystem, welches das Unternehmen in den wesentlichen Punkten abdeckt, das aber ebenso in späteren Projektschritten zu einem System erweitert werden kann, welches eine umfassende Funktionalität besitzt. Hieraus ergeben sich Möglichkeiten, strategischen Anforderungen an ein modernes Informationssystem, das die kritischen Erfolgsfaktoren eines Unternehmens konsequent unterstützen muss, gerecht zu werden und gleichzeitig ein so weit als möglich ressourcenschonendes, weil die Kostenreduktionsaspekte einer Standardlösung nutzend, Projekt durchzuführen. Ein weiterer wesentlicher Aspekt ist die situationsadäquate Modellinstanziierung, also die projektspezifische Anpassung des Vorgehensmodells sowie die situationsadäquate Wahl der Vorgehensweisen in Teilprojekten und dadurch Nutzung der Vorteile der verschiedenen Vorgehensstrategien beim konkreten Projektmanagement. Der Notwendigkeit der Entwicklung einer Projektorganisation für prototypingorientiertes Vorgehen wird in diesem Zusammenhang ebenfalls Rechnung getragen. Die Notwendigkeit der Unternehmen, sich einerseits mit starken Differenzierungspotenzialen am Markt hervorzuheben und andererseits bei ständig sinkenden Margen einer Kostenoptimierung nachzukommen, lässt auch in Zukunft das entwickelte Modell als erfolgreich erscheinen. Hinzu kommt die Tendenz zu Best-Of-Breed-Ansätzen und komponentenbasierten Systemen im Rahmen der Softwareauswahl, die eine ausgesprochen differenzierte Vorgehensweise in Projekten verstärkt notwendig machen wird. Durch die in das entwickelte Modell integrierten Prototyping-Ansätze wird der auch in Zukunft an Bedeutung gewinnenden Notwendigkeit der Anwenderintegration Rechnung getragen.