Low-Cost Micromechanically Tunable Optical Devices: Strained Resonator Engineering, Technological Implementation and Characterization

The rapid growth of the optical communication branches and the enormous demand for more bandwidth require novel networks such as dense wavelength division multiplexing (DWDM). These networks enable higher bitrate transmission using the existing optical fibers. Micromechanically tunable optical microcavity devices like VCSELs, Fabry-Pérot filters and photodetectors are core components of these novel DWDM systems. Several air-gap based tunable devices were successfully implemented in the last years. Even though these concepts are very promising, two main disadvantages are still remaining. On the one hand, the high fabrication and integration cost and on the other hand the undesired adverse buckling of the suspended membranes. This thesis addresses these two problems and consists of two main parts: • PECVD dielectric material investigation and stress control resulting in membranes shape engineering. • Implementation and characterization of novel tunable optical devices with tailored shapes of the suspended membranes. For this purposes, low-cost PECVD technology is investigated and developed in detail. The macro- and microstress of silicon nitride and silicon dioxide are controlled over a wide range. Furthermore, the effect of stress on the optical and mechanical properties of the suspended membranes and on the microcavities is evaluated. Various membrane shapes (concave, convex and planar) with several radii of curvature are fabricated. Using this resonator shape engineering, microcavity devices such as non tunable and tunable Fabry-Pérot filters, VCSELs and PIN photodetectors are succesfully implemented. The fabricated Fabry-Pérot filters cover a spectral range of over 200nm and show resonance linewidths down to 1.5nm. By varying the stress distribution across the vertical direction within a DBR, the shape and the radius of curvature of the top membrane are explicitely tailored. By adjusting the incoming light beam waist to the curvature, the fundamental resonant mode is supported and the higher order ones are suppressed. For instance, a tunable VCSEL with 26 nm tuning range, 400µW maximal output power, 47nm free spectral range and over 57dB side mode suppresion ratio (SMSR) is demonstrated. Other technologies, such as introducing light emitting organic materials in microcavities are also investigated.

Non-University Higher Education and the Relationship of Its Graduates and the World of Work: Colombia

The non-university sector has been part of the Colombian higher education system for more than 50-years. Despite its long years of existence, it has never occupied such an important role within the education system as the one it is having today. Therefore, the aim of this work is to analyze the development of the non-university sector in the framework of the country’s social, educational and economic demands. Likewise, its actual situation and certain aspects of the relationship between its graduates and the world of work, i.e., graduates’ employment characteristics, the relationship of higher education studies and their work, as well as their early career success, are examined. In order to generate the required information, a graduate survey was carried out in Atlántico (Colombia). The target population was graduates from higher education institutions registered in Atlántico who were awarded a technical, technological or professional degree in 2008 from any of the following knowledge areas: Fine Arts, Health Science, Economy-Administration-Accountancy and similar, and Engineering-Architecture-Urban planning and similar. Besides, interviews with academic and administrative staff from non-university institutions were carried out, and higher education related documents were analyzed. As a whole, the findings suggest that the non-university sector is expanding and may help to achieve some of the goals, for which it is widely promoted i.e., access expansion for under-represented groups, enhancement of the higher education system, and the provision of programs pertinent to the needs of the market. Nevertheless, some aspects require further consideration, e.g., the sector’s consolidation within the system and its quality. As for the relationship between non-university higher education and the world of work, it was found to be close; particularly in those aspects related to the use of knowledge and skills in the work, and the relationship between graduates’ studies and their work. Additionally, the analysis of the graduates’ in their early career stages exposes the significant role that the socioeconomic stratum plays in their working life, particularly in their wages. This indicates that apart from education, other factors like the graduates’ economic or social capital may have an impact on their future work perspectives