Spezifität der quantitativen Resistenz von Blättern und Früchten der Tomate (Lycopersicon ssp. L.) gegenüber Phytophthora infestans (Mont.) de Bary.

Ziel der vorliegenden Arbeit war es, einen Beitrag zur Resistenzforschung bei Tomaten gegenüber P. infestans zu leisten, um erste Grundlagen für eine mögliche Züchtungsstrategie auf Basis unterschiedlicher quantitativer Resistenzen zu erarbeiten. Hierzu wurde untersucht, inwieweit unterschiedliche qualitative und quantitative Resistenzen bei Tomatenblättern und -früchten vorliegen, und ob hierfür verantwortliche Mechanismen identifiziert werden können. Zudem wurde untersucht, ob isolatspezifische quantitative Resistenzen identifiziert werden können. Zu diesem Zweck wurde mit einer erweiterten Clusteranalyse, basierend auf einer modifizierten Sanghvi-T2 Distanz, ein statistisches Verfahren entwickelt, welches die Identifikation von quantitativen, isolatspezifischen Resistenzen unter der Berücksichtigung der Variabilität ermöglicht. Des weiteren wurde geprüft, inwieweit zwischen den Resistenzausprägungen auf dem Blatt und den Resistenzausprägungen auf der Frucht ein Zusammenhang besteht und inwieweit die im Labor beobachteten Resistenzen unter Freilandbedingungen eine Rolle spielen. Im Labortest wurde die qualitative und quantitative Blattresistenz von 109 Akzessionen aus elf Lycopersicon und Solanum Arten gegenüber zwölf unterschiedlich aggressiven und teilweise auch unterschiedlich virulenten P. infestans Isolaten untersucht (Kap. 3). Die Früchte von 38 Tomatensorten wurden auf ihre Resistenz gegenüber drei P. infestans Isolaten geprüft. Zusätzlich wurde der Einfluss der Fruchtnachreife auf die Resistenzeigenschaften der Tomatenfrüchte gegenüber P. infestans analysiert (Kap. 4). Insgesamt 40 Sorten wurden auch unter Feldbedingungen auf Blatt- und Fruchtbefall untersucht (Kap. 5). Die frühen Stadien der Infektion von Tomatenblättern mit P. infestans Sporangien wurden mikroskopisch bei acht Tomatensorten mit unterschiedlichen quantitativen Reaktionsprofilen und drei Isolaten untersucht (Kap. 6). Hierzu wurden die Entwicklungsstadien von P. infestans Sporangien nach 24h, 48h und 60h nach der Inokulation auf und im Blatt mit der Calcofluor und der KOH - Anilin Blau Färbung sichtbar gemacht. Das Auftreten und die Lokalisation von H2O2 im Blatt nach 48h und 60h nach der Inokulation in Reaktion auf die Infektion wurde mithilfe einer DAB (3,3′ - Diaminobenzidine) Färbung untersucht. Es wurden einige, z.T. auch wahrscheinlich neue, qualitative Blattresistenzen gegenüber P. infestans gefunden, jedoch war keine der 109 Akzessionen vollständig resistent gegenüber allen Isolaten. Für die quantitative Resistenz von Blättern lagen in vielen Fällen isolatspezifische Unterschiede vor. Die Sorte x Isolat Interaktionen konnten mit Hilfe der erweiterten Clusteranalyse erfolgreich analysiert werden und die Akzessionen in Gruppen mit unterschiedlichen quantitativen Resistenzprofilen bzgl. der Interaktion mit den Isolaten und des Resistenzniveaus eingeteilt werden. Für die Fruchtresistenz konnten keine qualitativen Resistenzen gegenüber den drei getesteten Isolaten gefunden werden. Im Gegensatz dazu unterschieden sich die Tomatensorten in ihrer quantitativen Resistenz und Sorten und Isolate interagierten signifikant. Auch für die Fruchtresistenz konnten Gruppen mit unterschiedlichen quantitativen Reaktionsprofilen gebildet werden. Insgesamt nimmt die Anfälligkeit von Tomatenfrüchten mit zunehmender Reife kontinuierlich und signifikant ab. Unter Laborbedingungen korrelierten nur die Sporulationskapazität der Früchte und der prozentuale Blattbefall. Im Feldversuch über zwei Jahre und mit bis zu 40 Tomatensorten war der Zusammenhang hoch signifikant, jedoch asymptotisch, d.h. bereits bei sehr geringem Blattbefall war der Fruchtbefall sehr hoch. Bei den Tomatenherkünften, die sowohl im Labor als auch im Feld auf ihre Anfälligkeit getestet wurden, erschienen die Blattanfälligkeiten ähnlich, während kein klarer Zusammenhang zwischen der Fruchtanfälligkeit im Feld und im Labor bestand. Die Entwicklung von P. infestans auf der Blattoberfläche war unabhängig von der Sorte. Sowohl beim Eindringen und der Etablierung von P. infestans ins Blatt als auch bei der damit verbunden H2O2 Aktivität im Wirt wurden deutliche isolat- und sortenspezifische Effekte gefunden, die aber nur zum Teil mit den quantitativen Unterschieden der Blattresistenz korrespondierten. Sorten, die bei hoher Resistenz unterschiedliche Reaktionsprofile aufweisen, sind grundsätzlich interessante Kreuzungspartner, um die quantitative Resistenz gegenüber P. infestans zu verbessern. Hier sind vor allem Sorten, die sich auch in ihrer H2O2 Aktivität unterscheiden von Interesse.

Management approaches in organic potato and tomato production

The presented thesis considered three different system approach topics to ensure yield and plant health in organically grown potatoes and tomatoes. The first topic describes interactions between late blight (Phytophthora infestans) incidence and soil nitrogen supply on yield in organic potato farming focussing in detail on the yield loss relationship of late blight based on results of several field trials. The interactive effects of soil N-supply, climatic conditions and late blight on the yield were studied in the presence and absence of copper fungicides from 2002-2004 for the potato cultivar Nicola. Under conditions of central Germany the use of copper significantly reduced late blight in almost all cases (15-30 %). However, the reductions in disease through copper application did not result in statistically significant yield increases (+0 – +10 %). Subsequently, only 30 % of the variation in yield could be attributed to disease reductions. A multiple regression model (R²Max), however, including disease reduction, growth duration and temperature sum from planting until 60 % disease severity was reached and soil mineral N contents 10 days after emergence could explain 75 % of the observed variations in yield. The second topic describes the effect of some selected organic fertilisers and biostimulant products on nitrogen-mineralization and efficiency, yield and diseases in organic potato and tomato trials. The organic fertilisers Biofeed Basis (BFB, plant derived, AgroBioProducts, Wageningen, Netherlands) and BioIlsa 12,5 Export (physically hydrolysed leather shavings, hair and skin of animals; ILSA, Arizignano, Italy) and two biostimulant products BioFeed Quality (BFQ, multi-compound seaweed extract, AgroBioProducts) and AUSMA (aqueous pine and spruce needle extract, A/S BIOLAT, Latvia), were tested. Both fertilisers supplied considerable amounts of nitrogen during the main uptake phases of the crops and reached yields as high or higher as compared to the control with horn meal fertilisation. The N-efficiency of the tested fertilisers in potatoes ranged from 90 to 159 kg yield*kg-1 N – input. Most effective with tomatoes were the combined treatments of fertiliser BFB and the biostimulants AUSMA and BFQ. Both biostimulants significantly increased the share of healthy fruit and/or the number of fruits. BFQ significantly increased potato yields (+6 %) in one out of two years and reduced R. solani-infestation in the potatoes. This suggests that the biostimulants had effects on plant metabolism and resistance properties. However, no effects of biostimulants on potato late blight could be observed in the fields. The third topic focused on the effect of suppressive composts and seed tuber health on the saprophytic pathogen Rhizoctonia solani in organic potato systems. In the present study 5t ha-1 DM of a yard and bio-waste (60/40) compost produced in a 5 month composting process and a 15 month old 100 % yard waste compost were used to assess the effects on potato infection with R. solani when applying composts within the limits allowed. Across the differences in initial seed tuber infestation and 12 cultivars 5t DM ha-1 of high quality composts, applied in the seed tuber area, reduced the infestation of harvested potatoes with black scurf, tuber malformations and dry core tubers by 20 to 84 %, 20 to 49 % and 38 to 54 %, respectively, while marketable yields were increased by 5 to 25 % due to lower rates of wastes after sorting (marketable yield is gross yield minus malformed tubers, tubers with dry core, tubers with black scurf > 15% infested skin). The rate of initial black scurf infection of the seed tubers also affected tuber number, health and quality significantly. Compared to healthy seed tubers initial black scurf sclerotia infestation of 2-5 and >10 % of tuber surface led in untreated plots to a decrease in marketable yields by 14-19 and 44-66 %, a increase of black scurf severity by 8-40 and 34-86 % and also increased the amount of malformed and dry core tubers by 32-57 and 109-214 %.

Genetic variation of and environmental effects on inducibility of resistance in tomatoes (Solanum lycopersicum L.) to Phytophthora infestans (Mont) de Bary

Many plant strengtheners are promoted for their supposed effects on nutrient uptake and/or resistance induction (IR). In addition, many organic fertilizers are supposed to enhance plant health and several studies have shown that tomatoes grown organically are more resistant to late blight, caused by Phytophthora infestans to tomatoes grown conventionally. Much is known about the mechanisms underlying IR. In contrast, there is no systematic knowledge about genetic variation for IR. Therefore, the following questions were addressed in the presented dissertation: (i) Is there genetic variation among tomato genotypes for inducibility of resistance to P. infestans? (ii) How do different PS compare with the chemical inducer BABA in their ability to IR? (iii) Does IR interact with the inducer used and different organic fertilizers? A varietal screening showed that contrary to the commonly held belief IR in tomatoes is genotype and isolate specific. These results indicate that it should be possible to select for inducibility of resistance in tomato breeding. However, isolate specificity also suggests that there could be pathogen adaptation. The three tested PS as well as two of the three tested organic fertilisers all induced resistance in the tomatoes. Depending on PS or BABA variety and isolate effects varied. In contrast, there were no variety and isolate specific effects of the fertilisers and no interactions with the PS and fertilisers. This suggests that the different PS should work independent of the soil substrate used. In contrast the results were markedly different when isolate mixtures were used for challenge inoculations. Plants were generally less susceptible to isolate mixtures than to single isolates. In addition, the effectiveness of the PS was greater and more similar to BABA when isolate mixtures were used. The fact that the different PS and BABA differed in their ability to induce resistance in different host genotype -pathogen isolate combinations puts the usefulness of IR as a breeding goal in question. This would result in varieties depending on specific inducers. The results with the isolate mixtures are highly relevant. On the one hand they increase the effectiveness of the resistance inducers. On the other hand, measures that increase the pathogen diversity such as the use of diversified host populations will also increase the overall resistance of the hosts. For organic tomato production the results indicate that it is possible to enhance the tomato growing system with respect to plant health management by using optimal fertilisers, plant strengtheners and any measures that increase system diversity.

Alley cropping of willows and grassland for bioenergy provision: productivity, tree-crop interactions and energy balance

The demand for biomass for bioenergy has increased rapidly in industrialized countries in the recent years. Biogenic energy carriers are known to reduce CO2 emissions. However, the resource-inefficient production of biomass often caused negative impacts on the environment, e.g. biodiversity losses, nitrate leaching, and erosion. The detrimental effects evolved mainly from annual crops. Therefore, the aim of modern bioenergy cropping systems is to combine yield stability and environmental benefits by the establishment of mixed-cropping systems. A particular emphasis is on perennial crops which are perceived as environmentally superior to annual crops. Agroforestry systems represent such mixed perennial cropping systems and consist of a mix of trees and arable crops or grassland within the same area of land. Agroforestry practices vary across the globe and alley cropping is a type of agroforestry system which is well adapted to the temperate zone, with a high degree of mechanization. Trees are planted in rows and crops are planted in the alleyways, which facilitates their management by machinery. This study was conducted to examine a young alley cropping system of willows and two grassland mixtures for bioenergy provision under temperate climate conditions. The first part of the thesis identified possible competition effects between willows and the two grassland mixtures. Since light seemed to be the factor most affecting the yield performance of the understory in temperate agroforestry systems, a biennial in situ artificial shade experiment was established over a separate clover-grass stand to quantify the effects of shade. Data to possible below- and aboveground interactions among willows and the two grassland mixtures and their effects on productivity, sward composition, and quality were monitored along a tree-grassland interface within the alleys. In the second part, productivity of the alley cropping system was examined on a triennial time frame and compared to separate grassland and willow stands as controls. Three different conversion technologies (combustion of hay, integrated generation of solid fuel and biogas from biomass, whole crop digestion) were applied to grassland biomass as feedstock and analyzed for its energetic potential. The energetic potential of willow wood chips was calculated by applying combustion as conversion technique. Net energy balances of separate grassland stands, agroforestry and pure willow stands evaluated their energy efficiency. Results of the biennial artificial shade experiment showed that severe shade (80 % light reduction) halved grassland productivity on average compared to a non-shaded control. White clover as heliophilous plant responded sensitively to limited radiation and its dry matter contribution in the sward decreased with increasing shade, whereas non-leguminous forbs (mainly segetal species) benefited. Changes in nutritive quality could not be confirmed by this experiment. Through the study on interactions within the alleys of the young agroforestry system it was possible to outline changes of incident light, soil temperature and sward composition of clover-grass along the tree-grassland interface. Nearly no effects of trees on precipitation, soil moisture and understory productivity occurred along the interface during the biennial experiment. Considering the results of the productivity and the net energy yield alley cropping system had lower than pure grassland stands, irrespective of the grassland seed mixture or fertilization, but was higher than that for pure willow stands. The comparison of three different energetic conversion techniques for the grassland biomass showed highest net energy yields for hay combustion, whereas the integrated generation of solid fuel and biogas from biomass (IFBB) and whole crop digestion performed similarly. However, due to the low fuel quality of hay, its direct combustion cannot be recommended as a viable conversion technique, whereas IFBB fuels were of a similar quality to wood chip from willow.