Quality Governance based on Enterprise Engineering Method and Six Sigma Approach

Enterprise Modeling (EM) is currently in operation either as a technique to represent and understand the structure and behavior of the enterprise, or as a technique to analyze business processes, and in many cases as support technique for business process reengineering. However, EM architectures and methods for Enterprise Engineering can also used to support new management techniques like SIX SIGMA, because these new techniques need a clear, transparent and integrated definition and description of the business activities of the enterprise to be able to build up, optimize and operate an successful enterprise. The main goal of SIX SIGMA is to optimize the performance of processes. A still open question is: "What are the adequate Quality criteria and methods to ensure such performance? What must we do to get Quality governance?" This paper describes a method including an Enterprise Engineering method and SIX SIGMA strategy to reach Quality Governance

Enterprise Engineering Method supporting Six Sigma Approach

Enterprise Modeling (EM) is currently in operation either as a technique to represent and understand the structure and behavior of the enterprise, or as a technique to analyze business processes, and in many cases as support technique for business process reengineering. However, EM architectures and methodes for Enterprise Engineering can also used to support new management techniques like SIX SIGMA, because these new techniques need a clear, transparent and integrated definition and description of the business activities of the enterprise to be able to build up, to optimize and to operate an successful enterprise.

A Study of a Comprehensive Career Services System in Chinese Universities

Since 1999, with the adoption of expansion policy in higher education by the Chinese government, enrollment and graduate numbers have been increasing at an unprecedented speed. Accustomed to a system in which university graduates were placed, many students are not trained in “selling themselves”, which exacerbates the situation leading to a skyrocketing unemployment rate among new graduates. The idea of emphasizing career services comes with increasing employment pressure among university graduates in recent years. The 1998 “Higher Education Act” made it a legislative requirement. Thereafter, the Ministry of Education issued a series of documents in order to promote the development of career services. All higher education institutions are required to set up special career service centers and to set a ratio of 1:500 between career staff and the total number of students. Related career management courses, especially career planning classes, are required to be clearly included as specific modules into the teaching plan with a requirement of no less than 38 sessions in one semester at all universities. Developing career services in higher education has thus become a hot issue. One of the more notable trends in higher education in recent years has been the transformation of university career service centers from merely being the coordinators of on-campus placement into full service centers for international career development. The traditional core of career services in higher education had been built around guidance, information and placements (Watts, 1997). This core was still in place, but the role of higher education career services has changed considerably in recent years and the nature of each part is being transformed (Watts, 1997). Most services are undertaking a range of additional activities, and the career guidance issue is emphasized much more than before. Career management courses, especially career planning classes, are given special focus in developing career services in the Chinese case. This links career services clearly and directly with the course provision function. In China, most career service centers are engaging in the transformation period from a “management-oriented” organization to a “service-oriented” organization. Besides guidance services, information services and placement activities, there is a need to blend them together with the new additional teaching function, which follows the general trend as regulated by the government. The role of career services has been expanding and this has brought more challenges to its development in Chinese higher education. Chinese universities still remain in the period of exploration and establishment in developing their own career services. In the face of the new situation, it is very important and meaningful to explore and establish a comprehensive career services system to address student needs in the universities. A key part in developing this system is the introduction of career courses and delivering related career management skills to the students. So there is the need to restructure the career service sectors within the Chinese universities in general. The career service centers will operate as a hub and function as a spoke in the wheel of this model system, providing support and information to staff located in individual teaching departments who are responsible for the delivery of career education, information, advice and guidance. The career service centers will also provide training and career planning classes. The purpose of establishing a comprehensive career services system is to provide a strong base for student career development. The students can prepare themselves well in psychology, ideology and ability before employment with the assistance of effective career services. To conclude, according to the different characteristics and needs of students, there will be appropriate services and guidance in different stages and different ways. In other words, related career services and career guidance activities would be started for newly enrolled freshmen and continue throughout their whole university process. For the operation of a comprehensive services system, there is a need for strong support by the government in the form of macro-control and policy guarantee, but support by the government in the form of macro-control and policy guarantee, but also a need for close cooperation with the academic administration and faculties to be actively involved in career planning and employment programs. As an integral function within the universities, career services must develop and maintain productive relationships with relevant campus offices and key stakeholders both within the universities and externally.

Large-Size AlGaN/GaN HEMT Large-Signal Electrothermal Characterization and Modeling for Wireless Digital Communications

The rapid growth in high data rate communication systems has introduced new high spectral efficient modulation techniques and standards such as LTE-A (long term evolution-advanced) for 4G (4th generation) systems. These techniques have provided a broader bandwidth but introduced high peak-to-average power ratio (PAR) problem at the high power amplifier (HPA) level of the communication system base transceiver station (BTS). To avoid spectral spreading due to high PAR, stringent requirement on linearity is needed which brings the HPA to operate at large back-off power at the expense of power efficiency. Consequently, high power devices are fundamental in HPAs for high linearity and efficiency. Recent development in wide bandgap power devices, in particular AlGaN/GaN HEMT, has offered higher power level with superior linearity-efficiency trade-off in microwaves communication. For cost-effective HPA design to production cycle, rigorous computer aided design (CAD) AlGaN/GaN HEMT models are essential to reflect real response with increasing power level and channel temperature. Therefore, large-size AlGaN/GaN HEMT large-signal electrothermal modeling procedure is proposed. The HEMT structure analysis, characterization, data processing, model extraction and model implementation phases have been covered in this thesis including trapping and self-heating dispersion accounting for nonlinear drain current collapse. The small-signal model is extracted using the 22-element modeling procedure developed in our department. The intrinsic large-signal model is deeply investigated in conjunction with linearity prediction. The accuracy of the nonlinear drain current has been enhanced through several issues such as trapping and self-heating characterization. Also, the HEMT structure thermal profile has been investigated and corresponding thermal resistance has been extracted through thermal simulation and chuck-controlled temperature pulsed I(V) and static DC measurements. Higher-order equivalent thermal model is extracted and implemented in the HEMT large-signal model to accurately estimate instantaneous channel temperature. Moreover, trapping and self-heating transients has been characterized through transient measurements. The obtained time constants are represented by equivalent sub-circuits and integrated in the nonlinear drain current implementation to account for complex communication signals dynamic prediction. The obtained verification of this table-based large-size large-signal electrothermal model implementation has illustrated high accuracy in terms of output power, gain, efficiency and nonlinearity prediction with respect to standard large-signal test signals.

Decent work?

Pastoralism and ranching are two different rangeland-based livestock systems in dryland areas of East Africa. Both usually operate under low and irregular rainfall and consequently low overall primary biomass production of high spatial and temporal heterogeneity. Both are usually located far from town centres, market outlets and communication, medical, educational, banking, insurance and other infrastructure. Whereas pastoralists can be regarded as self-employed, gaining their livelihood from managing their individually owned livestock on communal land, ranches mostly employ herders as wage labourers to manage the livestock owned by the ranch on the ranches’ own land property. Both production systems can be similarly labour intensive and – with regard to the livestock management – require the same type of work, whether carried out as self-employed pastoralist or as employed herder on a work contract. Given this similarity, the aim of this study was to comparatively assess how pastoralists and employed herders in northern Kenya view their working conditions, and which criteria they use to assess hardship and rewards in their daily work and their working life. Their own perception is compared with the concept of Decent Work developed by the International Labour Organisation (ILO). Samburu pastoralists in Marsabit and Samburu Districts as well as herders on ranches in Laikipia District were interviewed. A qualitative analysis of 47 semi-structured interviews yielded information about daily activities, income, free time, education and social security. Five out of 22 open interviews with pastoralists and seven out of 13 open interviews with employed herders fully transcribed and subjected to qualitative content analysis to yield life stories of 12 informants. Pastoralists consider it important to have healthy and satisfied animals. The ability to provide food for their family especially for the children has a high priority. Hardships for the pastoralists are, if activities are exhausting, and challenging, and dangerous. For employed herders, decent conditions are if their wages are high enough to be able to provide food for their family and formal education for their children. It is further most important for them to do work they are experienced and skilled in. Most employed herders were former pastoralists, who had lost their animals due to drought or raids. There are parallels between the ILO ‘Decent Work’ concept and the perception of working conditions of pastoralists and employed herders. These are, for example, that remuneration is of importance and the appreciation by either the employer or the community is desired. Some aspects that are seen as important by the ILO such as safety at work and healthy working conditions only play a secondary role to the pastoralists, who see risky and dangerous tasks as inherent characteristics of their efforts to gain a livelihood in their living environment.

Theoretical and experimental study of intracavity laser absorption spectroscopy

In this thesis, a dual mode tunable gas sensor based on intracavity laser absorption spectroscopy (ICLAS) principle is investigated, both, numerically and experimentally. In order to minimize the cost and size of the gas sensor, relative intensity noise (RIN) is implemented as a detection parameter. Investigation is performed to determine the effect of injection current, operating temperature, mode spacing, and cavity length on RIN. It has been found that it is best to operate the gas sensor at smaller mode spacing and near the threshold current or at larger mode spacing and far above the threshold current for the use of RIN as the readout parameter.