Beschreibung von Oberflächenphänomenen durch relativistische Clusterrechnungen unter Verwendung eines Einbettungsverfahrens

For the theoretical investigation of local phenomena (adsorption at surfaces, defects or impurities within a crystal, etc.) one can assume that the effects caused by the local disturbance are only limited to the neighbouring particles. With this model, that is well-known as cluster-approximation, an infinite system can be simulated by a much smaller segment of the surface (Cluster). The size of this segment varies strongly for different systems. Calculations to the convergence of bond distance and binding energy of an adsorbed aluminum atom on an Al(100)-surface showed that more than 100 atoms are necessary to get a sufficient description of surface properties. However with a full-quantummechanical approach these system sizes cannot be calculated because of the effort in computer memory and processor speed. Therefore we developed an embedding procedure for the simulation of surfaces and solids, where the whole system is partitioned in several parts which itsself are treated differently: the internal part (cluster), which is located near the place of the adsorbate, is calculated completely self-consistently and is embedded into an environment, whereas the influence of the environment on the cluster enters as an additional, external potential to the relativistic Kohn-Sham-equations. The basis of the procedure represents the density functional theory. However this means that the choice of the electronic density of the environment constitutes the quality of the embedding procedure. The environment density was modelled in three different ways: atomic densities; of a large prepended calculation without embedding transferred densities; bulk-densities (copied). The embedding procedure was tested on the atomic adsorptions of 'Al on Al(100) and Cu on Cu(100). The result was that if the environment is choices appropriately for the Al-system one needs only 9 embedded atoms to reproduce the results of exact slab-calculations. For the Cu-system first calculations without embedding procedures were accomplished, with the result that already 60 atoms are sufficient as a surface-cluster. Using the embedding procedure the same values with only 25 atoms were obtained. This means a substantial improvement if one takes into consideration that the calculation time increased cubically with the number of atoms. With the embedding method Infinite systems can be treated by molecular methods. Additionally the program code was extended by the possibility to make molecular-dynamic simulations. Now it is possible apart from the past calculations of fixed cores to investigate also structures of small clusters and surfaces. A first application we made with the adsorption of Cu on Cu(100). We calculated the relaxed positions of the atoms that were located close to the adsorption site and afterwards made the full-quantummechanical calculation of this system. We did that procedure for different distances to the surface. Thus a realistic adsorption process could be examined for the first time. It should be remarked that when doing the Cu reference-calculations (without embedding) we begun to parallelize the entire program code. Only because of this aspect the investigations for the 100 atomic Cu surface-clusters were possible. Due to the good efficiency of both the parallelization and the developed embedding procedure we will be able to apply the combination in future. This will help to work on more these areas it will be possible to bring in results of full-relativistic molecular calculations, what will be very interesting especially for the regime of heavy systems.

Molecular studies on a Dictyostelium homolog of the tafazzin gene, the cause of Barth syndrome in humans

Der eukaryotische Mikroorganismus Dictyostelium discoideum lebt als einzellige Amöbe solange ausreichende Nahrungsressourcen zur Verfügung stehen. Sobald Nahrungsmangel eintritt, entwickeln sich die Zellen von einem einzelligen zu einem mehrzelligen Zustand, der mit einem multizellulären Fruchtkörper abschließt. Dieser Prozess wird durch eine Reihe aufeinanderfolgender Signale organisiert, die eine differentielle Genexpression regulieren. Die Gene der Discoidin I Familie gehören zu den Ersten, die im Laufe des Wachstums-Differenzierungs-Übergangs (engl. GDT) aktiviert werden. Sie eignen sich daher vorzüglich als Marker für den Beginn der Entwicklung. Mit Hilfe einer REMI-Mutagenese und Discoidin I als molekularem Marker sind verschiedene Komponenten des Wachstums-Differenzierungs-Übergangs in unserer Arbeitsgruppe identifiziert worden (Zeng et al., 2000 A und B; Riemann und Nellen, persönliche Mitteilung). Mit demselben Ansatz wurde in der vorliegenden Arbeit eine REMI-Mutante identifiziert, die eine Fehl-Expression von Discoidin zeigte und einen axenischen Wachstumsdefekt bei 15 °C aufwies. Das Gen wurde als Homolog zum humanen Tafazzin-Gen identifiziert. Dieses Gen wurde zur Rekonstruktion des Phänotyps über homologe Rekombination erneut disruptiert, was wie erwartet zu dem zuerst beschriebenen Phänotyp führte. Folgerichtig ergab eine Überexpression des Gens in den Mutanten eine Komplementation des Phänotyps. Immunfluoreszenz-Experimente zeigten eine mitochondriale Lokalisation des Dictyostelium discoideum Taffazzin Proteins. Dass ein mitochondriales Protein in Zusammenhang mit dem Wachstums-Differenzierungs-Übergang steht, ist ein unerwarteter Befund, der aber als Hinweis darauf gewertet werden kann, dass Mitochondrien einen direkten Einfluss auf die entwicklungsspezifische Signaltransduktion ausüben. Die Taffazzin Disruptions-Mutante in Dictyostelium führte zu einem abnormalen Cardiolipin Metabolismus. Dieses Phospholipid ist ein charakteristischer Bestandteil der inneren Mitochondrienmembran und für die Funktion verschiedener Enzyme erforderlich. Unsere vorläufigen Analysen des Phospholipid-Gehalts zeigten Übereinstimmung mit Daten von Patienten mit Barth-Syndrom, einer humanen Erkrankung, bei der das Taffazzin-Gen Mutationen aufweist, und mit Hefe-Mutanten dieses Gens. Dies zeigt den Wert von Dictyostelium discoideum als einen weiteren Modelorganismus zur Untersuchung des Barth-Syndroms und zur Erprobung möglicher Therapieansätze.

Interpretation of noncharacteristic M X-rays in heavy colliding systems by selfconsistent relativistic molecular calculations

The result of the first calculation of a self-consistent relativistic many electron correlation diagram ever done (for the system Au - I) leads to a good agreement of the spectral shape and position of the observed noncharacteristic X-rays within the quasi adiabatic model.

Tomographic imaging of molecular orbitals in length and velocity form

Recently Itatani et al. [Nature 432, 876 (2004)] introduced the new concept of molecular orbital tomography, where high harmonic generation (HHG) is used to image electronic wave functions. We describe an alternative reconstruction form, using momentum instead of dipole matrix elements for the electron recombination step in HHG. We show that using this velocity-form reconstruction, one obtains better results than using the original length-form reconstruction. We provide numerical evidence for our claim that one has to resort to extremely short pulses to perform the reconstruction for an orbital with arbitrary symmetry. The numerical evidence is based on the exact solution of the time-dependent Schrödinger equation for 2D model systems to simulate the experiment. Furthermore we show that in the case of cylindrically symmetric orbitals, such as the N2 orbital that was reconstructed in the original work, one can obtain the full 3D wave function and not only a 2D projection of it. Vor kurzem führten Itatani et al. [Nature 432, 876 (2004)] das Konzept der Molelkülorbital-Tomographie ein. Hierbei wird die Erzeugung hoher Harmonischer verwendet, um Bilder von elektronischen Wellenfunktionen zu gewinnen. Wir beschreiben eine alternative Form der Rekonstruktion, die auf Impuls- statt Dipol-Matrixelementen für den Rekombinationsschritt bei der Erzeugung der Harmonischen basiert. Wir zeigen, dass diese "Geschwindigkeitsform" der Rekonstruktion bessere Ergebnisse als die ursprüngliche "Längenform" liefert. Wir zeigen numerische Beweise für unsere Behauptung, dass man zu extrem kurzen Laserpulsen gehen muss, um Orbitale mit beliebiger Symmetrie zu rekonstruieren. Diese Ergebnisse basieren auf der exakten Lösung der zeitabhängigen Schrödingergleichung für 2D-Modellsysteme. Wir zeigen ferner, dass für zylindersymmetrische Orbitale wie das N2-Orbital, welches in der oben zitierten Arbeit rekonstruiert wurde, das volle 3D-Orbital rekonstruiert werden kann, nicht nur seine 2D-Projektion.

Relativistic molecular calculations of superheavy molecules

Relativistic molecular calculations within the Dirac-Slater scheme have been used in a study of the electronic structure of 6d-metal superheavy hexafluorides. The theoretical results are compared with calculations and measurements of the homolog 4d- and 5d-metal hexafluorides. Large spin-orbit splitting dominates the electronic structure and even has the same order of magnitude as the crystal-field splitting for the valence electrons for the superheavy molecules. Ionization energies have been calculated using a transition state procedure.

Self-consistent relativistic molecular calculations of superheavy molecules: (_110 X)F_6

Using new relativistic molecular calculations within the Dirac-Slater scheme it is now feasible to study theoretically molecules containing superheavy elements. This opens a new era for the prediction of the physics and chemistry of superheavy elements. As an example we present the results for (_110 X) F_6, where it is shown that relativistic effects are nearly of the same order of magnitude as the crystal-field splitting.

Synthesis and characterisation of novel nitrogen and fluorine containing spirobifluorene derivatives for electronic applications and crystal engineering

Among organic materials, spirobifluorene derivatives represent a very attractive class of materials for electronic devices. These compounds have high melting points, glass transitions temperatures and morphological stability, which makes these materials suitable for organic electronic applications. In addition, some of spirobifluorenes can form porous supramolecular associations with significant volumes available for the inclusion of guests. These molecular associations based on the spirobifluorenes are noteworthy because they are purely molecular analogues of zeolites and other microporous solids, with potential applications in separation, catalysis, sensing and other areas.

High-Speed Semiconductor Lasers based on Low-Dimensional Active Materials for Optical Telecommunication

The scope of this work is the fundamental growth, tailoring and characterization of self-organized indium arsenide quantum dots (QDs) and their exploitation as active region for diode lasers emitting in the 1.55 µm range. This wavelength regime is especially interesting for long-haul telecommunications as optical fibers made from silica glass have the lowest optical absorption. Molecular Beam Epitaxy is utilized as fabrication technique for the quantum dots and laser structures. The results presented in this thesis depict the first experimental work for which this reactor was used at the University of Kassel. Most research in the field of self-organized quantum dots has been conducted in the InAs/GaAs material system. It can be seen as the model system of self-organized quantum dots, but is not suitable for the targeted emission wavelength. Light emission from this system at 1.55 µm is hard to accomplish. To stay as close as possible to existing processing technology, the In(AlGa)As/InP (100) material system is deployed. Depending on the epitaxial growth technique and growth parameters this system has the drawback of producing a wide range of nano species besides quantum dots. Best known are the elongated quantum dashes (QDash). Such structures are preferentially formed, if InAs is deposited on InP. This is related to the low lattice-mismatch of 3.2 %, which is less than half of the value in the InAs/GaAs system. The task of creating round-shaped and uniform QDs is rendered more complex considering exchange effects of arsenic and phosphorus as well as anisotropic effects on the surface that do not need to be dealt with in the InAs/GaAs case. While QDash structures haven been studied fundamentally as well as in laser structures, they do not represent the theoretical ideal case of a zero-dimensional material. Creating round-shaped quantum dots on the InP(100) substrate remains a challenging task. Details of the self-organization process are still unknown and the formation of the QDs is not fully understood yet. In the course of the experimental work a novel growth concept was discovered and analyzed that eases the fabrication of QDs. It is based on different crystal growth and ad-atom diffusion processes under supply of different modifications of the arsenic atmosphere in the MBE reactor. The reactor is equipped with special valved cracking effusion cells for arsenic and phosphorus. It represents an all-solid source configuration that does not rely on toxic gas supply. The cracking effusion cell are able to create different species of arsenic and phosphorus. This constitutes the basis of the growth concept. With this method round-shaped QD ensembles with superior optical properties and record-low photoluminescence linewidth were achieved. By systematically varying the growth parameters and working out a detailed analysis of the experimental data a range of parameter values, for which the formation of QDs is favored, was found. A qualitative explanation of the formation characteristics based on the surface migration of In ad-atoms is developed. Such tailored QDs are finally implemented as active region in a self-designed diode laser structure. A basic characterization of the static and temperature-dependent properties was carried out. The QD lasers exceed a reference quantum well laser in terms of inversion conditions and temperature-dependent characteristics. Pulsed output powers of several hundred milli watt were measured at room temperature. In particular, the lasers feature a high modal gain that even allowed cw-emission at room temperature of a processed ridge wave guide device as short as 340 µm with output powers of 17 mW. Modulation experiments performed at the Israel Institute of Technology (Technion) showed a complex behavior of the QDs in the laser cavity. Despite the fact that the laser structure is not fully optimized for a high-speed device, data transmission capabilities of 15 Gb/s combined with low noise were achieved. To the best of the author`s knowledge, this renders the lasers the fastest QD devices operating at 1.55 µm. The thesis starts with an introductory chapter that pronounces the advantages of optical fiber communication in general. Chapter 2 will introduce the fundamental knowledge that is necessary to understand the importance of the active region`s dimensions for the performance of a diode laser. The novel growth concept and its experimental analysis are presented in chapter 3. Chapter 4 finally contains the work on diode lasers.

Characterization of the molecular clockwork in the cockroach Rhyparobia maderae

Der Wechsel von Tag und Nacht erzeugt einen regelmäßigen Rhythmus von verschiedenen Umweltreizen, allen voran Licht und Temperatur. Fast jedes bis zum heutigen Tage untersuchte Lebewesen besitzt einen endogenen Mechanismus zur Zeitwahrnehmung, und diese "innere Uhr" befähigt Lebewesen dazu, sich vorausschauend an rhythmische Umwelt-Änderungen anzupassen. Circadiane Rhythmen bestehen auch ohne jegliche äußere Reize und basieren auf einem molekularen Rückkopplungs-Mechanismus, der Rhythmen in Genexpression und Proteinkonzentration von etwa 24 Stunden erzeugt. Obwohl sich die grundsätzlichen Mechanismen und Komponenten dieses molekularen Uhrwerks in allen Insekten ähneln, zeigte sich jedoch immer mehr, dass es im Detail doch wesentliche Unterschiede zwischen verschiedenen Insektengruppen gibt. Während das molekulare Uhrwerk der Fruchtfliege Drosophila melanogaster inzwischen sehr gut untersucht ist, fehlen bei den meisten Insektengruppen immernoch eingehende Untersuchungen. Fast nichts ist über die molekulare Basis von circadianen Rhythmen bei der Schabe Rhyparobia maderae bekannt, obwohl diese Art bereits seit Langem als Modellorganismus in der Chronobiologie dient. Um mit der Forschung am molekularen, circadianen System von R. maderae zu beginnen, wurde die Struktur und das Expressionsprofil der core feedback loop Gene per, tim1 und cry2 analysiert. Mittels degenerierten Primern und RACE konnte das vollständige offene Leseraster (OLR) von rmPer und rmCry2, und ein Teil des rmTim1 OLR kloniert werden. Eine phylogenetische Analyse gruppierte rmPER und rmCRY2 gemeinsam mit den Orthologa hemimetaboler Insekten. Viele bei D. melanogaster funktionell charakterisierte Domänen sind bei diesen Proteinen konserviert, was auf eine ähnliche Funktion in der inneren Uhr von R. maderae hinweist. Mittels quantitativer PCR konnte gezeigt werden, dass die mRNA von rmPer, rmTim1 und rmCry2 in verschiedenen Lichtregimen in der gleichen Phasenlage Tageszeit-abhängig schwankt. Die Phasenlage stellte sich bei unterschiedlichen Photoperioden jeweils relativ zum Beginn der Skotophase ein, mit Maxima in der ersten Hälfte der Nacht. Auch im Dauerdunkel zeigen sich Rhythmen in der rmTim1 und rmCry2 Expression. Die Amplitude der rmPer Expressionsrhythmen war jedoch so gering, dass keine signifikanten Unterschiede zwischen den einzelnen Zeitgeberzeiten (ZT) festgestellt werden konnten. Mittels Laufrad-Assays wurde untersucht wie Kurz- und Langtag Lichtregime die Verhaltensrhythmen beeinflussen. Es konnten nur Unterschiede in der Periodenlänge unter freilaufenden Bedingungen festgestellt werden, wenn höhere Lichtintensitäten (1000lx) zur Synchronisation (entrainment) genutzt wurden. Die Periode des freilaufenden Rhythmus war bei Tieren aus dem Kurztag länger. Die photoperiodische Plastizität zeigte sich also auch auf Verhaltensebene, obwohl höhere Lichtintensitäten notwendig waren um einen Effekt zu beobachten. Basierend auf den Sequenzen der zuvor klonierten OLR wurden gegen rmPER, rmTIM1 und rmCRY2 gerichtete Antikörper hergestellt. Die Antikörper gegen rmPER und rmTIM1 erkannten in western blots sehr wahrscheinlich spezifisch das jeweilige Protein. Zeitreihen von Gehirngewebe-Homogenisaten zeigten keinen offensichtlichen circadianen Rhythmus in der Proteinkonzentration, wahrscheinlich auf Grund einer Oszillation mit niedriger Amplitude. In Immunhistochemischen Färbungen konnte nur mit dem gegen rmPER gerichteten Antikörper aus Kaninchen ein Signal beobachtet werden. Beinahe jede Zelle des Zentralnervensystems war rmPER-immunreaktiv im Zellkern. Es konnten keine Unterschiede zwischen den untersuchten ZTs festgestellt werden, ähnlich wie bei den western blot Zeitreihen. In dieser Studie konnten erstmals molekulare Daten der circadianen Uhr von R. maderae erfasst und dargestellt werden. Die Uhrgene per, tim1 und cry2 werden in dieser Schabenart exprimiert und ihre Domänenstruktur sowie das circadiane Expressionsmuster ähneln dem hypothetischen ursprünglichen Insektenuhrwerk, welches der circadianen Uhr von Vertebraten nahesteht. Das molekulare Uhrwerk von R. maderae kann sich an unterschiedliche Photoperioden anpassen, und diese Anpassungen manifestieren sich im Expressionsprofil der untersuchten Uhrgene ebenso wie im Verhalten.

Ab initio Molecular Dynamics Simulations of the Structural Response of Solids to Ultrashort Laser and XUV Pulses

The theoretical model and underlying physics described in this thesis are about the interaction of femtosecond-laser and XUV pulses with solids. The key to understand the basics of such interaction is to study the structural response of the materials after laser interaction. Depending on the laser characteristics, laser-solid interaction can result in a wide range of structural responses such as solid-solid phase transitions, vacuum phonon squeezing, ultrafast melting, generation of coherent phonons, etc. During my research work, I have modeled the systems irradiated by low-, medium- and high-laser intensities, and studied different types of structural dynamics of solids at various laser fluences.

Atomistic-continuum modeling of ultrafast laser-induced melting of silicon targets

In this work, we present an atomistic-continuum model for simulations of ultrafast laser-induced melting processes in semiconductors on the example of silicon. The kinetics of transient non-equilibrium phase transition mechanisms is addressed with MD method on the atomic level, whereas the laser light absorption, strong generated electron-phonon nonequilibrium, fast heat conduction, and photo-excited free carrier diffusion are accounted for with a continuum TTM-like model (called nTTM). First, we independently consider the applications of nTTM and MD for the description of silicon, and then construct the combined MD-nTTM model. Its development and thorough testing is followed by a comprehensive computational study of fast nonequilibrium processes induced in silicon by an ultrashort laser irradiation. The new model allowed to investigate the effect of laser-induced pressure and temperature of the lattice on the melting kinetics. Two competing melting mechanisms, heterogeneous and homogeneous, were identified in our big-scale simulations. Apart from the classical heterogeneous melting mechanism, the nucleation of the liquid phase homogeneously inside the material significantly contributes to the melting process. The simulations showed, that due to the open diamond structure of the crystal, the laser-generated internal compressive stresses reduce the crystal stability against the homogeneous melting. Consequently, the latter can take a massive character within several picoseconds upon the laser heating. Due to the large negative volume of melting of silicon, the material contracts upon the phase transition, relaxes the compressive stresses, and the subsequent melting proceeds heterogeneously until the excess of thermal energy is consumed. A series of simulations for a range of absorbed fluences allowed us to find the threshold fluence value at which homogeneous liquid nucleation starts contributing to the classical heterogeneous propagation of the solid-liquid interface. A series of simulations for a range of the material thicknesses showed that the sample width we chosen in our simulations (800 nm) corresponds to a thick sample. Additionally, in order to support the main conclusions, the results were verified for a different interatomic potential. Possible improvements of the model to account for nonthermal effects are discussed and certain restrictions on the suitable interatomic potentials are found. As a first step towards the inclusion of these effects into MD-nTTM, we performed nanometer-scale MD simulations with a new interatomic potential, designed to reproduce ab initio calculations at the laser-induced electronic temperature of 18946 K. The simulations demonstrated that, similarly to thermal melting, nonthermal phase transition occurs through nucleation. A series of simulations showed that higher (lower) initial pressure reinforces (hinders) the creation and the growth of nonthermal liquid nuclei. For the example of Si, the laser melting kinetics of semiconductors was found to be noticeably different from that of metals with a face-centered cubic crystal structure. The results of this study, therefore, have important implications for interpretation of experimental data on the kinetics of melting process of semiconductors.