The European organic food market - how to increase its transparency?

Der Europäische Markt für ökologische Lebensmittel ist seit den 1990er Jahren stark gewachsen. Begünstigt wurde dies durch die Einführung der EU-Richtlinie 2092/91 zur Zertifizierung ökologischer Produkte und durch die Zahlung von Subventionen an umstellungswillige Landwirte. Diese Maßnahmen führten am Ende der 1990er Jahre für einige ökologische Produkte zu einem Überangebot auf europäischer Ebene. Die Verbrauchernachfrage stieg nicht in gleichem Maße wie das Angebot, und die Notwendigkeit für eine Verbesserung des Marktgleichgewichts wurde offensichtlich. Dieser Bedarf wurde im Jahr 2004 von der Europäischen Kommission im ersten „Europäischen Aktionsplan für ökologisch erzeugte Lebensmittel und den ökologischen Landbau“ formuliert. Als Voraussetzung für ein gleichmäßigeres Marktwachstum wird in diesem Aktionsplan die Schaffung eines transparenteren Marktes durch die Erhebung statistischer Daten über Produktion und Verbrauch ökologischer Produkte gefordert. Die Umsetzung dieses Aktionsplans ist jedoch bislang nicht befriedigend, da es auf EU-Ebene noch immer keine einheitliche Datenerfassung für den Öko-Sektor gibt. Ziel dieser Studie ist es, angemessene Methoden für die Erhebung, Verarbeitung und Analyse von Öko-Marktdaten zu finden. Geeignete Datenquellen werden identifiziert und es wird untersucht, wie die erhobenen Daten auf Plausibilität untersucht werden können. Hierzu wird ein umfangreicher Datensatz zum Öko-Markt analysiert, der im Rahmen des EU-Forschungsprojektes „Organic Marketing Initiatives and Rural Development” (OMIaRD) erhoben wurde und alle EU-15-Länder sowie Tschechien, Slowenien, Norwegen und die Schweiz abdeckt. Daten für folgende Öko-Produktgruppen werden untersucht: Getreide, Kartoffeln, Gemüse, Obst, Milch, Rindfleisch, Schaf- und Ziegenfleisch, Schweinefleisch, Geflügelfleisch und Eier. Ein zentraler Ansatz dieser Studie ist das Aufstellen von Öko-Versorgungsbilanzen, die einen zusammenfassenden Überblick von Angebot und Nachfrage der jeweiligen Produktgruppen liefern. Folgende Schlüsselvariablen werden untersucht: Öko-Produktion, Öko-Verkäufe, Öko-Verbrauch, Öko-Außenhandel, Öko-Erzeugerpreise und Öko-Verbraucherpreise. Zudem werden die Öko-Marktdaten in Relation zu den entsprechenden Zahlen für den Gesamtmarkt (öko plus konventionell) gesetzt, um die Bedeutung des Öko-Sektors auf Produkt- und Länderebene beurteilen zu können. Für die Datenerhebung werden Primär- und Sekundärforschung eingesetzt. Als Sekundärquellen werden Publikationen von Marktforschungsinstituten, Öko-Erzeugerverbänden und wissenschaftlichen Instituten ausgewertet. Empirische Daten zum Öko-Markt werden im Rahmen von umfangreichen Interviews mit Marktexperten in allen beteiligten Ländern erhoben. Die Daten werden mit Korrelations- und Regressionsanalysen untersucht, und es werden Hypothesen über vermutete Zusammenhänge zwischen Schlüsselvariablen des Öko-Marktes getestet. Die Datenbasis dieser Studie bezieht sich auf ein einzelnes Jahr und stellt damit einen Schnappschuss der Öko-Marktsituation der EU dar. Um die Marktakteure in die Lage zu versetzen, zukünftige Markttrends voraussagen zu können, wird der Aufbau eines EU-weiten Öko-Marktdaten-Erfassungssystems gefordert. Hierzu wird eine harmonisierte Datenerfassung in allen EU-Ländern gemäß einheitlicher Standards benötigt. Die Zusammenstellung der Marktdaten für den Öko-Sektor sollte kompatibel sein mit den Methoden und Variablen der bereits existierenden Eurostat-Datenbank für den gesamten Agrarmarkt (öko plus konventionell). Eine jährlich aktualisierte Öko-Markt-Datenbank würde die Transparenz des Öko-Marktes erhöhen und die zukünftige Entwicklung des Öko-Sektors erleichtern. ---------------------------

German consumers' attitudes and preferences with regard to organic food and food from different origins

In dieser Studie geht es darum, ein umfassendes Bild bezüglich der Konsumenteneinstellungen, Präferenzen und Zahlungsbereitschaften für ökologisch produzierte Lebensmittel und Lebensmittel verschiedener Herkünfte in Deutschland zu erhalten. Obwohl die regionale Herkunft von Lebensmitteln nicht offiziell und einheitlich geregelt ist und keiner Zertifizierung unterliegt wie die ökologische Produktion von Lebensmitteln, zeigen nationale und internationale Studien gleichermaßen, dass Konsumenten bereit sind, mehr für regionale als für ökologisch produzierte Lebensmittel zu bezahlen. Zur Erreichung des Forschungsziels wurde ein Kaufexperiment in Kombination mit einer Konsumentenbefragung, bestehend aus Fragen zum generellen Einkaufsverhalten, zu Einstellungen gegenüber regionalen und ökologisch produzierten Lebensmitteln und zu soziodemographischen Informationen durchgeführt. Im Kaufexperiment wurden die Attribute Produktherkunft, Produktionsweise und Preis anhand vier verschiedener Produkte (Äpfel, Butter, Mehl und Steaks) untersucht. Die Befragung, einschließlich des Experimentes, war durch Interviewer eines Marktforschungsinstituts initiiert, computergestützt und von den Konsumenten selbständig zu erledigen. Das Ziel war es 80 Konsumenten in jedem der acht Befragungsorte in verschiedenen Regionen Deutschlands zu befragen. Zur Auswertung des Experiments wurden RPL-Modell geschätzt, die die Konsumentenpräferenzen für die zu untersuchenden Produktattribute aufzeigen und die Berechnung von Zahlungsbereitschaften ermöglichen. Für die Gesamtheit der Konsumenten war die regionale Herkunft von Lebensmitteln wichtiger als die ökologische Produktion. Außerdem wurden Produktalternativen, die aus der Region stammen, immer stärker präferiert als Produkte aus Deutschland, aus einem Nachbarland und einem außereuropäischen Land. Weiterhin zeigte die Studie, dass Konsumentenpräferenzen produkt- und regionsspezifisch sind. Folglich wird empfohlen, in zukünftigen Studien unterschiedlich Produkte bzw. Produktgruppen und Konsumenten verschiedener Regionen einzubeziehen. Die zunehmenden Präferenzen und Zahlungsbereitschaften der Konsumenten für regionale Lebensmittel deuteten sowohl in dieser Dissertation als auch in vielen anderen nationalen und internationalen Studien darauf hin, dass es ein großes Potential für einen regionalen Lebensmittelmarkt gibt. Aus diesem Grund wird Produzenten und Vermarktern von ökologischen sowie konventionellen Produkten empfohlen, verstärkt in die Entwicklung von regionalen Versorgungsketten zu investieren.

The empirical study of the price mechanism in the Chinese housing market

In China, the history of the establishment of the private housing market is pretty short. Actually in less then two decades, the market has grown from almost the scratch to playing an important role in the economy. A great achievement! But many problems also exist. They need to be properly addressed and solved. Price problem---simply put, housing price is too high--- is one of them, and this paper is focused on it. Three basic questions are posed, i.e. (1) how to judge the housing affordability? (2) why the housing price is so high? (3) how to solve the housing price problem. The paper pays particular attention to answering the second question. Except the numerous news reports and surveys show that most of the ordinary city dwellers complained about the high housing price, the mathematical means, the four ratios, are applied to judge the housing affordability in Shanghai and Shenzhen. The results are very clear that the price problem is severe. So why? Something is wrong with the price mechanism. This research shows that mainly these five factors contribute to the price problem: the housing reform, the housing development model, the unbalanced housing market, the housing project financing and the poor governmental management. Finally the paper puts forward five suggestions to solve the housing price problem in first-hand private Chinese housing market. They include: the establishment of real estate information system, the creation of specific price management department, the government price regulation, the property tax and the legalization of "cushion money".

Fliesslochformen und Gewindefurchen in dünne Bleche und Rohre aus Kupfer und Kupferlegierungen

This thesis in Thermal Flow Drilling and Flowtap in thin metal sheet and pipes of copper and copper alloys had as objectives to know the comportment of copper and copper alloys sheet metal during the Thermal Flow Drill processes with normal tools, to know the best Speed and Feed machine data for the best bushing quality, to known the best Speed for Form Tapping processes and to know the best bush long in pure copper pipes for water solar interchange equipment. Thermal Flow Drilling (TFD) and Form Tapping (FT) is one of the research lines of the Institute of Production and Logistics (IPL) at University of Kassel. At December 1995, a work meeting of IPL, Santa Catarina University, Brazil, Buenos Aires University, Argentine, Tarapacá University (UTA), Chile members and the CEO of Flowdrill B.V. was held in Brazil. The group decided that the Manufacturing Laboratory (ML) of UTA would work with pure copper and brass alloys sheet metal and pure copper pipes in order to develop a water interchange solar heater. The Flowdrill BV Company sent tools to Tarapacá University in 1996. In 1999 IPL and the ML carried out an ALECHILE research project promoted by the DAAD and CONICyT in copper sheet metal and copper pipes and sheet metal a-brass alloys. The normal tools are lobed, conical tungsten carbide tool. When rotated at high speed and pressed with high axial force into sheet metal or thin walled tube generated heat softens the metal and allows the drill to feed forward produce a hole and simultaneously form a bushing from the displacement material. In the market exist many features but in this thesis is used short and longs normal tools of TFD. For reach the objectives it was takes as references four qualities of the frayed end bushing, where the best one is the quality class I. It was used pure copper and a-brass alloys sheet metals, with different thickness. It was used different TFD drills diameter for four thread type, from M-5 to M10. Similar to the Aluminium sheet metals studies it was used the predrilling processes with HSS drills around 30% of the TFD diameter (1,5 – 3,0 mm D). In the next step is used only 2,0 mm thick metal sheet, and 9,2 mm TFD diameter for M-10 thread. For the case of pure commercial copper pipes is used for ¾” inch diameter and 12, 8 mm (3/8”) TFD drill for holes for 3/8” pipes and different normal HSS drills for predrilling processes. The chemical sheet metal characteristics were takes as reference for the material behaviour. The Chilean pure copper have 99,35% of Cu and 0,163% of Zinc and the Chilean a-brass alloys have 75,6% of Cu and 24,0% of Zinc. It is used two German a-brass alloys; Nº1 have 61,6% of Cu, 36,03 % of Zinc and 2,2% of Pb and the German a-brass alloys Nº2 have 63,1% of Cu, 36,7% of Zinc and 0% of Pb. The equipments used were a HAAS CNC milling machine centre, a Kistler dynamometer, PC Pentium II, Acquisition card, TESTPOINT and XAct software, 3D measurement machine, micro hardness, universal test machine, and metallographic microscope. During the test is obtained the feed force and momentum curves that shows the material behaviour with TFD processes. In general it is take three phases. It was possible obtain the best machining data for the different sheet of copper and a-brass alloys thick of Chilean materials and bush quality class I. In the case of a-brass alloys, the chemical components and the TFD processes temperature have big influence. The temperature reach to 400º Celsius during the TFD processes and the a-brass alloys have some percents of Zinc the bush quality is class I. But when the a-brass alloys have some percents of Lead who have 200º C melting point is not possible to obtain a bush, because the Lead gasify and the metallographic net broke. During the TFD processes the recrystallization structures occur around the Copper and a-brass alloy bush, who gives more hardness in these zones. When the threads were produce with Form Tapping processes with Flowtap tools, this hardness amount gives a high limit load of the thread when hey are tested in a special support that was developed for it. For eliminated the predrilling processes with normal HSS drills it was developed a compound tool. With this new tool it was possible obtain the best machining data for quality class I bush. For the copper pipes it is made bush without predrilling and the quality class IV was obtained. When it is was used predrilling processes, quality classes I bush were obtained. Then with different HSS drill diameter were obtained different long bush, where were soldering with four types soldering materials between pipes with 3/8” in a big one as ¾”. Those soldering unions were tested by traction test and all the 3/8” pipes broken, and the soldering zone doesn’t have any problem. Finally were developed different solar water interchange heaters and tested. As conclusions, the present Thesis shows that the Thermal Flow Drilling in thinner metal sheets of cooper and cooper alloys needs a predrilling process for frayed end quality class I bushings, similar to thinner sheets of aluminium bushes. The compound tool developed could obtain quality class I bushings and excludes predrilling processes. The bush recrystalization, product of the friction between the tool and the material, the hardness grows and it is advantageous for the Form Tapping. The methodology developed for commercial copper pipes permits to built water solar interchange heaters.

Regional Labor Market Disparities

Regionale Arbeitsmärkte unterscheiden sich erheblich hinsichtlich wesentlicher Kennzahlen wie der Arbeitslosenquote, des Lohnniveaus oder der Beschäftigungsentwicklung. Wegen ihrer Persistenz sind diese Unterschiede von hoher Relevanz für die Politik. Die wirtschaftswissenschaftliche Literatur liefert bereits theoretische Modelle für die Analyse regionaler Arbeitsmärkte. In der Regel sind diese Modelle aber nicht dazu geeignet, regionale Arbeitsmarktunterschiede endogen zu erklären. Das bedeutet, dass sich die Unterschiede regionaler Arbeitsmärkte in der Regel nicht aus den Modellzusammenhängen selbst ergeben, sondern „von außen“ eingebracht werden müssen. Die empirische Literatur liefert Hinweise, dass die Unterschiede zwischen regionalen Arbeitsmärkten auf die Höhe der regionalen Arbeitsnachfrage zurückzuführen sind. Die Arbeitsnachfrage wiederum leitet sich aus den Gütermärkten ab: Es hängt von der Entwicklung der regionalen Gütermärkte ab, wie viele Arbeitskräfte benötigt werden. Daraus folgt, dass die Ursachen für Unterschiede regionaler Arbeitsmärkte in den Unterschieden zwischen den regionalen Gütermärkten zu suchen sind. Letztere werden durch die Literatur zur Neuen Ökonomischen Geographie (NÖG) untersucht. Die Literatur zur NÖG erklärt Unterschiede regionaler Gütermärkte, indem sie zentripetale und zentrifugale Kräfte gegenüberstellt. Zentripetale Kräfte sind solche, welche hin zur Agglomeration ökonomischer Aktivität wirken. Im Zentrum dieser Diskussion steht vor allem das Marktpotenzial: Unternehmen siedeln sich bevorzugt an solchen Standorten an, welche nahe an großen Märkten liegen. Erwerbspersonen wiederum bevorzugen solche Regionen, welche ihnen entsprechende Erwerbsaussichten bieten. Beides zusammen bildet einen sich selbst verstärkenden Prozess, der zur Agglomeration ökonomischer Aktivität führt. Dem stehen jedoch zentrifugale Kräfte gegenüber, welche eine gleichmäßigere Verteilung ökonomischer Aktivität bewirken. Diese entstehen beispielsweise durch immobile Produktionsfaktoren oder Ballungskosten wie etwa Umweltverschmutzung, Staus oder hohe Mietpreise. Sind die zentripetalen Kräfte hinreichend stark, so bilden sich Zentren heraus, in denen sich die ökonomische Aktivität konzentriert, während die Peripherie ausdünnt. In welchem Ausmaß dies geschieht, hängt von dem Verhältnis beider Kräfte ab. Üblicherweise konzentriert sich die Literatur zur NÖG auf Unterschiede zwischen regionalen Gütermärkten und geht von der Annahme perfekter Arbeitsmärkte ohne Arbeitslosigkeit aus. Die Entstehung und Persistenz regionaler Arbeitsmarktunterschiede kann die NÖG daher üblicherweise nicht erklären. An dieser Stelle setzt die Dissertation an. Sie erweitert die NÖG um Friktionen auf dem Arbeitsmarkt, um die Entstehung und Persistenz regionaler Arbeitsmarktunterschiede zu erklären. Sie greift dazu auf eine empirische Regelmäßigkeit zurück: Zahlreiche Studien belegen einen negativen Zusammenhang zwischen Lohn und Arbeitslosigkeit. In Regionen, in denen die Arbeitslosigkeit hoch ist, ist das Lohnniveau gering und umgekehrt. Dieser Zusammenhang wird als Lohnkurve bezeichnet. Auf regionaler Ebene lässt sich die Lohnkurve mithilfe der Effizienzlohntheorie erklären, die als theoretische Grundlage in der Dissertation Anwendung findet. Konzentriert sich nun die ökonomische Aktivität aufgrund der zentripetalen Kräfte in einer Region, so ist in diesem Zentrum die Arbeitsnachfrage höher. Damit befindet sich das Zentrum auf einer günstigen Position der Lohnkurve mit geringer Arbeitslosigkeit und hohem Lohnniveau. Umgekehrt findet sich die Peripherie auf einer ungünstigen Position mit hoher Arbeitslosigkeit und geringem Lohnniveau wieder. Allerdings kann sich die Lohnkurve in Abhängigkeit des Agglomerationsgrades verschieben. Das komplexe Zusammenspiel der endogenen Agglomeration mit den Arbeitsmarktfriktionen kann dann unterschiedliche Muster regionaler Arbeitsmarktdisparitäten hervorrufen. Die Dissertation zeigt auf, wie im Zusammenspiel der NÖG mit Effizienzlöhnen regionale Arbeitsmarktdisparitäten hervorgerufen werden. Es werden theoretische Modelle formuliert, die diese Interaktionen erklären und welche die bestehende Literatur durch spezifische Beiträge erweitern. Darüber hinaus werden die zentralen Argumente der Theorie einem empirischen Test unterworfen. Es kann gezeigt werden, dass das zentrale Argument – der positive Effekt des Marktpotentials auf die Arbeitsnachfrage – relevant ist. Außerdem werden Politikimplikationen abgeleitet und der weitere Forschungsbedarf aufgezeigt.

Status and Potential of Smallholder Livestock Production Systems in Xishuangbanna, southern P.R. China

With Chinas rapid economic development during the last decades, the national demand for livestock products has quadrupled within the last 20 years. Most of that increase in demand has been answered by subsidized industrialized production systems, while million of smallholders, which still provide the larger share of livestock products in the country, have been neglected. Fostering those systems would help China to lower its strong urban migration streams, enhance the livelihood of poorer rural population and provide environmentally save livestock products which have a good chance to satisfy customers demand for ecological food. Despite their importance, China’s smallholder livestock keepers have not yet gained appropriate attention from governmental authorities and researchers. However, profound analysis of those systems is required so that adequate support can lead to a better resource utilization and productivity in the sector. To this aim, this pilot study analyzes smallholder livestock production systems in Xishuangbanna, located in southern China. The area is bordered by Lao and Myanmar and geographically counts as tropical region. Its climate is characterized by dry and temperate winters and hot summers with monsoon rains from May to October. While the regionis plain, at about 500 m asl above sea level in the south, outliers of the Himalaya mountains reach out into the north of Xishuangbanna, where the highest peak reaches 2400 m asl. Except of one larger city, Jinghong, Xishuangbanna mainly is covered by tropical rainforest, areas under agricultural cultivation and villages. The major income is generated through inner-Chinese tourism and agricultural production. Intensive rubber plantations are distinctive for the lowland plains while small-scaled traditional farms are scattered in the mountane regions. In order to determine the current state and possible future chances of smallholder livestock production in that region, this study analyzed the current status of the smallholder livestock sector in the Naban River National Nature Reserve (NRNNR), an area which is largely representative for the whole prefecture. It covers an area of about 50square kilometer and reaches from 470 up to 2400 m asl. About 5500 habitants of different ethnic origin are situated in 24 villages. All data have been collected between October 2007 and May 2010. Three major objectives have been addressed in the study: 1. Classifying existing pig production systems and exploring respective pathways for development 2. Quantifying the performance of pig breeding systemsto identify bottlenecks for production 3. Analyzing past and current buffalo utilization to determine the chances and opportunities of buffalo keeping in the future In order to classify the different pig production s ystems, a baseline survey (n=204, stratified cluster sampling) was carried out to gain data about livestock species, numbers, management practices, cultivated plant species and field sizes as well associo-economic characteristics. Sampling included two clusters at village level (altitude, ethnic affiliation), resulting in 13 clusters of which 13-17 farms were interviewed respectively. Categorical Principal Component Analysis (CatPCA) and a two-step clustering algorithm have been applied to identify determining farm characteristics and assort recorded households into classes of livestock production types. The variables keep_sow_yes/no, TLU_pig, TLU_buffalo, size_of_corn_fields, altitude_class, size_of_tea_plantationand size_of_rubber_fieldhave been found to be major determinants for the characterization of the recorded farms. All farms have extensive or semi-intensive livestock production, pigs and buffaloes are predominant livestock species while chicken and aquaculture are available but play subordinate roles for livelihoods. All pig raisers rely on a single local breed, which is known as Small Ear Pig (SMEP) in the region. Three major production systemshave been identified: Livestock-corn based LB; 41%), rubber based (RB; 39%) and pig based (PB;20%) systems. RB farms earn high income from rubber and fatten 1.9 ±1.80 pigs per household (HH), often using purchased pig feed at markets. PB farms own similar sized rubber plantations and raise 4.7 ±2.77 pigs per HH, with fodder mainly being cultivated and collected in theforest. LB farms grow corn, rice and tea and keep 4.6 ±3.32 pigs per HH, also fed with collected and cultivated fodder. Only 29% of all pigs were marketed (LB: 20%; RB: 42%; PB: 25%), average annual mortality was 4.0 ±4.52 pigs per farm (LB: 4.6 ±3.68; RB: 1.9 ±2.14; PB: 7.1 ±10.82). Pig feed mainly consists of banana pseudo stem, corn and rice hives and is prepared in batches about two to three times per week. Such fodder might be sufficient in energy content but lacks appropriate content of protein. Pigs therefore suffer from malnutrition, which becomes most critical in the time before harvest season around October. Farmers reported high occurrences of gastrointestinal parasites in carcasses and often pig stables were wet and filled with manure. Deficits in nutritional and hygienic management are major limits for development and should be the first issues addressed to improve productivity. SME pork was found to be known and referred by local customers in town and by richer lowland farmers. However, high prices and lacking availability of SME pork at local wet-markets were the reasons which limited purchase. If major management constraints are overcome, pig breeders (PB and LB farms) could increase the share of marketed pigs for town markets and provide fatteners to richer RB farmers. RB farmers are interested in fattening pigs for home consumption but do not show any motivation for commercial pig raising. To determine the productivity of input factors in pig production, eproductive performance, feed quality and quantity as well as weight development of pigs under current management were recorded. The data collection included a progeny history survey covering 184 sows and 437 farrows, bi-weekly weighing of 114 pigs during a 16-months time-span on 21 farms (10 LB and 11 PB) as well as the daily recording of feed quality and quantity given to a defined number of pigs on the same 21 farms. Feed samples of all recorded ingredients were analyzed for their respective nutrient content. Since no literature values on thedigestibility of banana pseudo stem – which is a major ingredient of traditional pig feed in NRNNR – were found, a cross-sectional digestibility trial with 2x4 pigs has been conducted on a station in the research area. With the aid of PRY Herd Life Model, all data have been utilized to determine thesystems’ current (Status Quo = SQ) output and the productivity of the input factor “feed” in terms of saleable life weight per kg DM feed intake and monetary value of output per kg DM feed intake.Two improvement scenarios were simulated, assuming 1) that farmers adopt a culling managementthat generates the highest output per unit input (Scenario 1; SC I) and 2) that through improved feeding, selected parameters of reproduction are improved by 30% (SC II). Daily weight gain averaged 55 ± 56 g per day between day 200 and 600. The average feed energy content of traditional feed mix was 14.92 MJ ME. Age at first farrowing averaged 14.5 ± 4.34 months, subsequent inter-farrowing interval was 11.4 ± 2.73 months. Littersize was 5.8 piglets and weaning age was 4.3 ± 0.99 months. 18% of piglets died before weaning. Simulating pig production at actualstatus, it has been show that monetary returns on inputs (ROI) is negative (1:0.67), but improved (1:1.2) when culling management was optimized so that highest output is gained per unit feed input. If in addition better feeding, controlled mating and better resale prices at fixed dates were simulated, ROI further increased to 1:2.45, 1:2.69, 1:2.7 and 1:3.15 for four respective grower groups. Those findings show the potential of pork production, if basic measures of improvement are applied. Futureexploration of the environment, including climate, market-season and culture is required before implementing the recommended measures to ensure a sustainable development of a more effective and resource conserving pork production in the future. The two studies have shown that the production of local SME pigs plays an important role in traditional farms in NRNNR but basic constraints are limiting their productivity. However, relatively easy approaches are sufficient for reaching a notable improvement. Also there is a demand for more SME pork on local markets and, if basic constraints have been overcome, pig farmers could turn into more commercial producers and provide pork to local markets. By that, environmentally safe meat can be offered to sensitive consumers while farmers increase their income and lower the risk of external shocks through a more diverse income generating strategy. Buffaloes have been found to be the second important livestock species on NRNNR farms. While they have been a core resource of mixed smallholderfarms in the past, the expansion of rubber tree plantations and agricultural mechanization are reasons for decreased swamp buffalo numbers today. The third study seeks to predict future utilization of buffaloes on different farm types in NRNNR by analyzing the dynamics of its buffalo population and land use changes over time and calculating labor which is required for keeping buffaloes in view of the traction power which can be utilized for field preparation. The use of buffaloes for field work and the recent development of the egional buffalo population were analyzed through interviews with 184 farmers in 2007/2008 and discussions with 62 buffalo keepers in 2009. While pig based farms (PB; n=37) have abandoned buffalo keeping, 11% of the rubber based farms (RB; n=71) and 100% of the livestock-corn based farms (LB; n=76) kept buffaloes in 2008. Herd size was 2.5 ±1.80 (n=84) buffaloes in early 2008 and 2.2 ±1.69 (n=62) in 2009. Field work on own land was the main reason forkeeping buffaloes (87.3%), but lending work buffaloes to neighbors (79.0%) was also important. Other purposes were transport of goods (16.1%), buffalo trade (11.3%) and meat consumption(6.4%). Buffalo care required 6.2 ±3.00 working hours daily, while annual working time of abuffalo was 294 ±216.6 hours. The area ploughed with buffaloes remained constant during the past 10 years despite an expansion of land cropped per farm. Further rapid replacement of buffaloes by tractors is expected in the near future. While the work economy is drastically improved by the use of tractors, buffaloes still can provide cheap work force and serve as buffer for economic shocks on poorer farms. Especially poor farms, which lack alternative assets that could quickly be liquidizedin times of urgent need for cash, should not abandon buffalo keeping. Livestock has been found to be a major part of small mixed farms in NRNNR. The general productivity was low in both analyzed species, buffaloes and pigs. Productivity of pigs can be improved through basic adjustments in feeding, reproductive and hygienic management, and with external support pig production could further be commercialized to provide pork and weaners to local markets and fattening farms. Buffalo production is relatively time intensive, and only will be of importance in the future to very poor farms and such farms that cultivate very small terraces on steep slopes. These should be encouraged to further keep buffaloes. With such measures, livestock production in NRNNR has good chances to stay competitive in the future.

From evolution to co-evolution – An empirical study of the role of innovation, policy and public research in industrial dynamics

In the past decades since Schumpeter’s influential writings economists have pursued research to examine the role of innovation in certain industries on firm as well as on industry level. Researchers describe innovations as the main trigger of industry dynamics, while policy makers argue that research and education are directly linked to economic growth and welfare. Thus, research and education are an important objective of public policy. Firms and public research are regarded as the main actors which are relevant for the creation of new knowledge. This knowledge is finally brought to the market through innovations. What is more, policy makers support innovations. Both actors, i.e. policy makers and researchers, agree that innovation plays a central role but researchers still neglect the role that public policy plays in the field of industrial dynamics. Therefore, the main objective of this work is to learn more about the interdependencies of innovation, policy and public research in industrial dynamics. The overarching research question of this dissertation asks whether it is possible to analyze patterns of industry evolution – from evolution to co-evolution – based on empirical studies of the role of innovation, policy and public research in industrial dynamics. This work starts with a hypothesis-based investigation of traditional approaches of industrial dynamics. Namely, the testing of a basic assumption of the core models of industrial dynamics and the analysis of the evolutionary patterns – though with an industry which is driven by public policy as example. Subsequently it moves to a more explorative approach, investigating co-evolutionary processes. The underlying questions of the research include the following: Do large firms have an advantage because of their size which is attributable to cost spreading? Do firms that plan to grow have more innovations? What role does public policy play for the evolutionary patterns of an industry? Are the same evolutionary patterns observable as those described in the ILC theories? And is it possible to observe regional co-evolutionary processes of science, innovation and industry evolution? Based on two different empirical contexts – namely the laser and the photovoltaic industry – this dissertation tries to answer these questions and combines an evolutionary approach with a co-evolutionary approach. The first chapter starts with an introduction of the topic and the fields this dissertation is based on. The second chapter provides a new test of the Cohen and Klepper (1996) model of cost spreading, which explains the relationship between innovation, firm size and R&D, at the example of the photovoltaic industry in Germany. First, it is analyzed whether the cost spreading mechanism serves as an explanation for size advantages in this industry. This is related to the assumption that the incentives to invest in R&D increase with the ex-ante output. Furthermore, it is investigated whether firms that plan to grow will have more innovative activities. The results indicate that cost spreading serves as an explanation for size advantages in this industry and, furthermore, growth plans lead to higher amount of innovative activities. What is more, the role public policy plays for industry evolution is not finally analyzed in the field of industrial dynamics. In the case of Germany, the introduction of demand inducing policy instruments stimulated market and industry growth. While this policy immediately accelerated market volume, the effect on industry evolution is more ambiguous. Thus, chapter three analyzes this relationship by considering a model of industry evolution, where demand-inducing policies will be discussed as a possible trigger of development. The findings suggest that these instruments can take the same effect as a technical advance to foster the growth of an industry and its shakeout. The fourth chapter explores the regional co-evolution of firm population size, private-sector patenting and public research in the empirical context of German laser research and manufacturing over more than 40 years from the emergence of the industry to the mid-2000s. The qualitative as well as quantitative evidence is suggestive of a co-evolutionary process of mutual interdependence rather than a unidirectional effect of public research on private-sector activities. Chapter five concludes with a summary, the contribution of this work as well as the implications and an outlook of further possible research.

Changes of traditional farming systems and their effects on land degradation and socio-economic conditions in the Inle Lake region, Myanmar

At many locations in Myanmar, ongoing changes in land use have negative environmental impacts and threaten natural ecosystems at local, regional and national scales. In particular, the watershed area of Inle Lake in eastern Myanmar is strongly affected by the environmental effects of deforestation and soil erosion caused by agricultural intensification and expansion of agricultural land, which are exacerbated by the increasing population pressure and the growing number of tourists. This thesis, therefore, focuses on land use changes in traditional farming systems and their effects on socio-economic and biophysical factors to improve our understanding of sustainable natural resource management of this wetland ecosystem. The main objectives of this research were to: (1) assess the noticeable land transformations in space and time, (2) identify the typical farming systems as well as the divergent livelihood strategies, and finally, (3) estimate soil erosion risk in the different agro-ecological zones surrounding the Inle Lake watershed area. GIS and remote sensing techniques allowed to identify the dynamic land use and land cover changes (LUCC) during the past 40 years based on historical Corona images (1968) and Landsat images (1989, 2000 and 2009). In this study, 12 land cover classes were identified and a supervised classification was used for the Landsat datasets, whereas a visual interpretation approach was conducted for the Corona images. Within the past 40 years, the main landscape transformation processes were deforestation (- 49%), urbanization (+ 203%), agricultural expansion (+ 34%) with a notably increase of floating gardens (+ 390%), land abandonment (+ 167%), and marshlands losses in wetland area (- 83%) and water bodies (- 16%). The main driving forces of LUCC appeared to be high population growth, urbanization and settlements, a lack of sustainable land use and environmental management policies, wide-spread rural poverty, an open market economy and changes in market prices and access. To identify the diverse livelihood strategies in the Inle Lake watershed area and the diversity of income generating activities, household surveys were conducted (total: 301 households) using a stratified random sampling design in three different agro-ecological zones: floating gardens (FG), lowland cultivation (LL) and upland cultivation (UP). A cluster and discriminant analysis revealed that livelihood strategies and socio-economic situations of local communities differed significantly in the different zones. For all three zones, different livelihood strategies were identified which differed mainly in the amount of on-farm and off-farm income, and the level of income diversification. The gross margin for each household from agricultural production in the floating garden, lowland and upland cultivation was US$ 2108, 892 and 619 ha-1 respectively. Among the typical farming systems in these zones, tomato (Lycopersicon esculentum L.) plantation in the floating gardens yielded the highest net benefits, but caused negative environmental impacts given the overuse of inorganic fertilizers and pesticides. The Revised Universal Soil Loss Equation (RUSLE) and spatial analysis within GIS were applied to estimate soil erosion risk in the different agricultural zones and for the main cropping systems of the study region. The results revealed that the average soil losses in year 1989, 2000 and 2009 amounted to 20, 10 and 26 t ha-1, respectively and barren land along the steep slopes had the highest soil erosion risk with 85% of the total soil losses in the study area. Yearly fluctuations were mainly caused by changes in the amount of annual precipitation and the dynamics of LUCC such as deforestation and agriculture extension with inappropriate land use and unsustainable cropping systems. Among the typical cropping systems, upland rainfed rice (Oryza sativa L.) cultivation had the highest rate of soil erosion (20 t ha-1yr-1) followed by sebesten (Cordia dichotoma) and turmeric (Curcuma longa) plantation in the UP zone. This study indicated that the hotspot region of soil erosion risk were upland mountain areas, especially in the western part of the Inle lake. Soil conservation practices are thus urgently needed to control soil erosion and lake sedimentation and to conserve the wetland ecosystem. Most farmers have not yet implemented soil conservation measures to reduce soil erosion impacts such as land degradation, sedimentation and water pollution in Inle Lake, which is partly due to the low economic development and poverty in the region. Key challenges of agriculture in the hilly landscapes can be summarized as follows: fostering the sustainable land use of farming systems for the maintenance of ecosystem services and functions while improving the social and economic well-being of the population, integrated natural resources management policies and increasing the diversification of income opportunities to reduce pressure on forest and natural resources.